[Deutsch]
README.TXT MATROX GRAPHICS INC. 2000.09.07
Matrox PowerDesk für Windows NT 4.0
Hinweis: Diese Datei enthält eventuell neue Informationen, die bei der
Drucklegung der Dokumentation noch nicht in Ihre Sprache übersetzt waren.
Wir bitten hierfür um Ihr Verständnis.
Inhalt
======
- Installation
- Beschreibung dieser Release
- Verwendung von Matrox PowerDesk
- Hardware-beschleunigtes 3D
- Anmerkungen, Probleme und Einschränkungen
- Matrox TV-Ausgabe
- [English...] DualHead notes [...English]
Installation
============
[English...]
This section describes how to install the Matrox display driver for
Windows NT 4.0 (SP 5).
Note: You may need administrator rights to install certain
software. For more information, see Windows documentation.
(1) After the display driver has been copied to your hard disk:
Right-click your Windows desktop background, then click
"Properties" > "Settings" > "Display Type" > "Change" >
"Have Disk" > "Browse".
(2) Select the folder where the Matrox display driver for your
operating system (Windows NT 4.0) is located, then
click "Open" > "OK".
(3) Select the appropriate model/language name, then click
"OK" > "Yes" > "OK" > "Close" > "Close" > "Yes".
[...English]
Beschreibung dieser Release
===========================
Bei dieser Release handelt es sich um den Bildschirmtreiber für Windows NT
der Matrox-Grafikkarte. Er unterstützt Microsoft Windows NT für x86 CPUs,
Version 4.0 (Build 1381 oder höher).
Dieses Produkt umfaßt:
- Bildschirmtreiber
- Matrox PowerDesk für Windows NT 4.0
[English...]
The display driver supports up to 16 graphics chips at a time. If one of
those chips has DualHead support, the display driver supports up to 17
displays at a time. (Note: A graphics card may have more than one graphics
chip. Also, the display driver must support each model of graphics card
installed in your computer.)
[...English]
Verwendung von Matrox PowerDesk
===============================
Informationen zum Ändern der Auflösung, Auswählen eines Monitors und Verwenden
von Matrox PowerDesk finden Sie in der Datei "online.doc". Sie können diese
Datei mit WordPad aufrufen.
Hardware-beschleunigtes 3D
==========================
Zur 3D-Hardwarebeschleunigung unterstützt der Windows NT 4.0
Bildschirmtreiber von Matrox die OpenGL-Schnittstelle mit zwei Treibertypen
-- MCD (Mini Client Driver) und ICD (Installable Client Driver). Die
Grafikkarten Matrox Millennium, Millennium II, Mystique, Mystique 220 sowie
die G100-basierten Grafikkarten unterstützen MCD. Unterstützung für ICD
bieten die G200-basierten, G400-basierten sowie die neueren Grafifkkarten
von Matrox. (ICD-Treiber eignen sich besser zur Optimierung als MCD-Treiber.)
Für die 3D-Hardwarebeschleunigung gelten folgende Einschränkungen:
- Die Beschleunigung ist gegenwärtig nicht verfügbar, wenn mehrere Karten
benutzt werden.
- Der MCD unterstützt keine 8-bpp- (256 Farben) und 24-bpp-Modi (16777216
Farben). Die Hardware-Beschleunigung ist möglich bei den Modi
16 bpp (64K Farben) und 32 bpp (True Color).
- Einbußen bei den verfügbaren Auflösungen sind zu erwarten. Alle 3D-Modi
erfordern zusätzlichen Speicher für die Doppel- und/oder Z-Pufferung, und
dieser Speicher steht dann nicht mehr für die Anzeige zur Verfügung.
Anmerkungen, Probleme und Einschränkungen
=========================================
[English...]
- Using 1280 x 800 display resolution with P1690 monitors
To use 1280 x 800 display resolution with P1690 monitors, make
sure "P1690" is selected with the Matrox "Monitor" property
sheet. To access this property sheet, click the "Matrox QuickDesk"
icon on your Windows taskbar, then click "Matrox Display
Properties" > "Monitor". For more information on monitor
selection, see the Matrox PowerDesk guide included with your
display driver.
[...English]
- Computer mit mehreren PCI-Bussen
Es kann vorkommen, daß das Umschalten zu einer Vollbild-
Befehlsaufforderung oder eine andere Modusänderung zu einem Absturz
mit blauem Bildschirm führt, falls eine Karte nicht im PCI-Bus 0
installiert ist. Das Problem wird im Moment noch analysiert. In der
Zwischenzeit können Sie das Problem umgehen, indem Sie die Karte an
einen anderen PCI-Steckplatz anschließen.
Bei manchen Systemen meldet Windows NT Konflikte zwischen Karten, die
jenseits der PCI-Brücke installiert wurden. In diesem Fall kann der
Matrox Millennium-Miniport-Treiber nicht auf die eigene Karte
zugreifen. Falls Ihr System die Millennium-Karte nicht finden kann,
schließen Sie versuchsweise an einen anderen PCI-Steckplatz an.
Durch die Installation des Microsoft Service-Pack 3 (oder höher) für
Windows NT 4.0 sollten zahlreiche dieser Probleme behoben werden.
- DirectDraw mit virtuellen Desktops
Manche DirectDraw-Programme funktionieren mit virtuellen Desktops
nicht richtig. Wir empfehlen das Ausführen von DirectDraw-Programmen mit
einem normalen Desktop.
- 3D-Maze-Bildschirmschoner
Bei Verwendung des "3D-Maze"-Bildschirmschoners kann es zu
Anzeigeproblemen kommen. Diese Probleme treten auf, nachdem der
Microsoft Service-Pack 2 für Windows NT 4.0 installiert ist. Momentan
wird versucht, durch den Service-Pack 3 (oder höher) diese Anzeigeprobleme
zu beheben.
- Ausführen von Winstone 97
Die Standardeinstellung CenterPOPUP sollte deaktiviert werden, wenn
der Winstone 97-Benchmark-Test ausgeführt wird. Manche Tests melden u
.U. einen Zeitüberschreitungsfehler, wenn CenterPOPUP verwendet wird.
- Einschränkung bei mehreren Grafikkarten
Windows NT 4.0 unterstützt höchstens 280 verschiedene Anzeigemodus-
Einstellungen (d.h. eine Kombination aus Auflösung, Farbpalette und
Bildwiederholrate) Wenn in IhremComputer mehr als eine Matrox-
Grafikkarte installiert ist, kann dies unter Umständen ein Problem
werden.
Wenn der Matrox-Optionsschalter "VESA-Einstellungen" gewählt wird,
wenn sich in Ihrem Computer mehrere Matrox-Karten befinden, ist die
Wahrscheinlichkeit des Auftretens der Windows NT 4.0-Beschränkung
in der Anzahl der Anzeigemodi sogar noch höher. Dies liegt daran,
daß die Option "VESA-Einstellungen" für jede Anzeigeauflösungs- und
Farbpaletteneinstellung mehrere unterschiedliche Bildwiederholraten
unterstützt.
Sind in Ihrem Computer mehrere Matrox-Grafikkarten installiert,
sollten Sie die Option "VESA-Einstellungen" nach Möglichkeit nicht
verwenden. Beachten Sie, daß durch ein Ändern der Bildwiederholrate
mit Hilfe des Microsoft-Dialogfelds "Bildschirmeigenschaften"die
Option "VESA-Einstellungen" aktiviert wird.
- 3D Studio MAX 1.2
Wenn Sie beim Ausführen von 3D Studio Max 1.2 mit dem Matrox
HEIDI-Treiber Probleme haben, deaktivieren Sie bei den "Allgemeine
Einstellungen" das Kontrollkästchen "Bus-Mastering verwenden". Sie
greifen auf dieses Kontrollkästchen zu, klicken Sie auf "Starten" ->
"Programme" -> "Matrox PowerDesk" -> "Matrox-Bildschirmeigenschaften" ->
"Leistung".
- 3D Studio MAX 2.0
Das Umschalten zwischen der HEIDI-Software-Emulation und der
OpenGL-Beschleunigung, während 3D Studio Max 2.0 aktiv ist, kann bei
den Anzeigeanschlüssen Flimmern verursachen, wenn Animationen
wiedergegeben werden. Dieses Problem tritt u.U. auch auf, wenn
Anzeigeeinstellungen (Auflösung oder Farbpalette) geändert werden,
wenn 3D Studio Max ausgeführt wird. Wenn Sie auf diese Probleme
stoßen, schließen Sie 3D Studio Max, ändern die Anzeigeeinstellungen
(Auflösung oder Farbpalette), und starten dann 3D Studio MAX neu.
[English...]
- 15-bit color palette support
A 15-bit color palette is no longer supported.
- Multi-display desktop support
With a multi-display desktop, all displays use the same color palette and
display resolution. The maximum display resolution you can select is
determined by the display with the highest maximum display resolution.
If a display in your multi-display desktop doesn't support a selected
display resolution, that display will automatically use a virtual display.
With a "virtual display", parts of your "display area" are off-screen. You
can move your mouse pointer to the edge of the screen to move the visible
part of your virtual display. This virtual display feature is similar to
using the Matrox zoom (PixelTOUCH) feature.
Note: The "virtual display" feature isn't available with the secondary
display of a DualHead-supporting graphics card. If a secondary display is
part of your multi-display desktop, the maximum display resolution you can
select is limited by the maximum display resolution of your secondary
display. For more information on DualHead, see "DualHead notes".
Software monitor settings help determine the maximum display resolution
for each display. If software monitor settings aren't properly selected for
all displays, one or more displays may become garbled or unusable if an
unsupported display resolution is selected. For more information on
selecting software monitor settings, see the online PowerDesk guide
(online.doc).
- Video playback with multi-display mode
In multi-display mode, digital video playback may be more limited than in
single-display mode. Specifically, some DVD or video playback programs may
not start at all or play back with lower quality. You may be able to run the
program and/or improve playback quality by closing the program, switching to
single-display mode, and then restarting the program. For more information
on switching to single-display mode, see other Matrox documentation.
This limitation may not apply to "DualHead Multi-Display" mode. For more
information, see "DualHead notes" in this file.
- OpenGL support
Note the following limitations related to the OpenGL driver included with
Matrox PowerDesk:
- OpenGL support may not be included in some versions of Matrox PowerDesk.
For a version of Matrox PowerDesk with OpenGL support enabled, see
the Matrox Web site (www.matrox.com/mga).
- Under Windows NT 4.0, OpenGL acceleration isn't supported with
Matrox MMS (Multi-Monitor Series) graphics cards or if you have more
than one Matrox graphics card installed in your computer.
- With DualHead-supporting graphics cards, OpenGL acceleration is
available while using "DualHead Multi-Display" mode under
Windows NT 4.0, (as long as there isn't another graphics card installed
in your computer).
- Using 3D Studio Max 2.0, you may experience problems with the viewports
being improperly redrawn. If this happens, simply click in a viewport
to properly update their display. (This problem isn't present with
version 2.5 or 3.0 of 3D Studio Max.)
- System memory requirements
Because of a limitation in Windows NT 4.0, you may experience problems
if your computer doesn't have more system memory than the total amount
of graphics memory used in your computer. To determine the amount of
graphics memory used in your computer, add the total amount of graphics
memory on each installed Matrox graphics card.
Depending on your total amount of graphics memory, here are some
recommended amounts of system memory for Windows NT 4.0:
Graphics memory | System memory
(total) | (recommended)
-------------------+------------------
32 MB | 64 MB or more
64 MB | 128 MB or more
128 MB | 192 MB or more
160 MB | 256 MB or more
- Full-screen DOS support with multiple graphics chip
If you have more than 10 graphics chips in your system (for example, 3
Matrox MMS-Quad cards), your system may stop responding when running a
DOS program in full-screen mode. If your DOS program supports it, run it
in a DOS window.
[...English]
Matrox TV-Ausgabe
=================
Die Matrox Marvel-Karte unterstützt die TV-Ausgabe. Diese Unterstützung
ermöglicht die Ausgabe der Anzeigen des Computers auf einem normalen
Fernseher und deren Aufzeichnung auf einem Videorecorder, sofern diese
Geräte an die Grafikkarte angeschlossen sind.
Empfehlung
----------
- Beim Spielen unter Verwendung der TV-Ausgabe empfehlen wir eine Auflösung
von 640 x 480, da die Auflösung von Fernsehern kleiner als die der meisten
Computerbildschirme ist. Wenn Sie eine höhere Auflösung verwenden (800 x 600
oder 1024 x 768), wirkt die Anzeige auf dem Fernseher im Vergleich zu der
auf dem Computerbildschirm leicht unscharf -- kleine Details sind auf dem
Fernseher also schwerer zu erkennen.
- (für Matrox G100/G200-Karte)
Die TV-Standardausgabeeinstellungen von Matrox sind für die Darstellung
der meisten Computergrafiken (z. B. Computerspiele oder Windows-Desktop)
auf vielen Fernsehern gut geeignet. Es sind TV-Ausgabeeinstellungen
verfügbar, die auf Sendestandards basieren und besser für die Anzeige
von Vollbildvideos geeignet sind (z. B. aus einer Videodatei). Es gibt
folgende Einstellungen:
NTSC
Helligkeit : 180
Kontrast : 234
Sättigung : 137
Farbton : 0
PAL
Helligkeit : 167
Kontrast : 255
Sättigung : 138
Farbton : 0
Hinweis: Um eine optimale Ausgabe zu erreichen, müssen Sie gegebenenfalls
die Einstellungen am Fernseher ändern. Die Standardeinstellungen vieler
Videogeräte sind für Helligkeit, Kontrast, Sättigung und Farbton höher als
die Sendestandards. Diese Einstellungen sind normalerweise zum Abspielen von
Videos, jedoch nicht für Computergrafiken geeignet. (Aus diesem Grund
liegen die Matrox-Standardeinstellungen unter den für die Videowiedergabe
optimalen Einstellungen.) Weitere Informationen zum Ändern der
Einstellungen am Fernseher finden Sie im zugehörigen Handbuch.
Weitere Informationen
---------------------
Weitere Informationen zu den Anzeigeeinstellungen finden Sie im Matrox-
Handbuch und in der Online-Dokumentation. Informationen zum Ändern der
Anzeigeauflösung eines Spiels finden Sie in der zugehörigen Dokumentation.
Hinweis: Die Matrox-Funktionen zum Vergrößern und Verkleinern der Anzeige
sowie zum virtuellen Desktop werden im TV-Ausgabemodus nicht unterstützt.
Darüber hinaus wird der TV-Ausgabemodus nicht unterstützt, wenn mehr als
eine Matrox Grafikkarte im Computer installiert ist.
[English...]
Note: For TV output with full-screen DOS display modes under Windows NT 4.0,
only text display modes (02h, 03h) are supported.
DualHead notes
==============
Certain Matrox graphics cards can use one graphics chip to control two
separate displays -- this is the Matrox "DualHead" feature. If you have a
DualHead-supporting graphics card, note the following under Windows NT 4.0:
- DualHead software controls (on the Matrox PowerDesk "DualHead" property
sheet) are only available if, when Windows NT 4.0 restarts, a secondary
display is connected to your DualHead-supporting graphics card. For more
information on DualHead software controls, see context-sensitive help.
- The "VESA settings" option isn't available when you're using a TV as your
secondary display.
- With the "DualHead Multi-Display" feature, DirectDraw and OpenGL
acceleration is available for the main and secondary displays of your
DualHead-supporting graphics card.
- With the "DualHead Multi-Display" feature, all displays in your system
may be limited by the display capabilities of the secondary display of
your DualHead-supporting graphics card. Specifically:
- Only a 16- or 32-bit color palette is available.
- The Matrox zoom feature (PixelTOUTCH) is unavailable.
- The mouse pointer is drawn entirely by the software. As a result, the
mouse pointer may flicker or disappear while it's in an area of the
display that's being redrawn quickly (for example, a video window).
- Because the secondary display doesn't support the "virtual display"
feature, the maximum display resolution of a multi-display desktop is
limited by the maximum display resolution of the secondary display.
- If you have a DualHead supporting graphics card and you're using DualHead
Multi-Display, Clone, or Zoom mode, digital video may appear as a solid
color on your secondary display. This can happen if video is played using
the hardware-overlay feature of your Matrox graphics card. Video played
using the overlay feature is generally of higher quality but it can be
viewed only on your main display.
Because only one program at a time can use the overlay feature, any other
program started while the overlay feature is used won't be able to use the
feature. The overlay feature will be available to the first program to
start after the program currently using the overlay is closed.
For video that normally uses the hardware-overlay feature, you may be able
to view the digital video on your secondary display by running another
instance of the video player. For example, if you're viewing a file using
the overlay feature with Microsoft Media Player, double-clicking on the file
again starts another instance of the Media Player. This instance properly
plays video on your secondary display. Then, you could close the first
instance of the Media Player and still be able to view video on your
secondary display.
- The "DualHead Clone" feature is unavailable if your DualHead-supporting
graphics card isn't controlling the primary display of your computer.
The "primary display" of your computer is the one that first displays
information when your computer restarts. For information on how to change
which graphics card controls your primary display, see your system manual.
- With the "DualHead Clone" feature, both the main and secondary
display of your DualHead-supporting graphics card use the same monitor
settings (specifically, the same vertical refresh rate).
If your secondary display is a TV, the vertical refresh rate is determined
by the TV standard selected on the Matrox PowerDesk "Monitor" property
sheet (60 Hz for NTSC, 50 Hz for PAL).
If your secondary display is a computer monitor, the "Monitor" property
sheet isn't available. In this case, use the "Refresh Frequency" control
on the "Settings" property sheet to change your vertical refresh rate. If
you select a refresh rate or display resolution that isn't supported by
either display, one or both displays may become garbled or unusable.
- With the "DualHead Clone" feature, the virtual desktop feature is
unavailable.
[...English]
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.