RADLAN-MIB DEFINITIONS ::= BEGIN
-- Title: RADLAN ROS
-- This Private MIB supports the ROS
-- Version: 7.311
-- Date: 11 Oct 2003
--
-- 05-Jun-2003 Added rlHostParamTable
-- 12-Jun-2003 Added enumeration to rndErrorSeverity
-- 14-Jun-2003 Added field rlCopyHistoryErrorMessage to table rlCopyHistoryTable
-- 29-Jun-2003 Tables rlOspf...LnkTable replayed tables rlOspf...LSATable)
-- 08-Jul-2003 The low range boundary and the default value of rlDvmrpPruneLifetime
-- were changed from 300 to 200 seconds
-- 16-Jul-2003 The following values VesuvioT and VesuvioF were added to
-- rlPhDModuleType
-- 22-Jul-2003 Added rlStartupCDBChanged, rlManualReboot
-- 21-Aug-2003 Added rlOspfTuning
-- 13-Sep-2003 Added IMPLIED to INDEX { IMPLIED rlTranslationNameToIpName }
-- 13-Sep-2003 Added rlMridTable
-- 20-Sep-2003 Added rlMirModel
-- 21-Sep-2003 Deleted JackType from IMPORTS clause
-- 21-Sep-2003 Changed naming of SMIv2-like types
-- 21-Sep-2003 Moved rlSyslog branch to new MIB
-- 21-Sep-2003 Moved rlCopy branch to new MIB
-- 21-Sep-2003 Editorial changes
-- 11-Oct-2003 Changed OSPF tuning
IMPORTS
NetworkAddress, IpAddress, Counter,
Gauge, TimeTicks, enterprises
FROM RFC1155-SMI
OBJECT-TYPE
FROM RFC-1212
DisplayString, PhysAddress, ipAddrEntry
FROM RFC1213-MIB
rip2IfConfEntry
FROM RFC1389-MIB
TRAP-TYPE
FROM RFC-1215
DLCI
FROM RFC1315-MIB
InterfaceIndexOrZero, InterfaceIndex, ifIndex
FROM IF-MIB
OwnerString, EntryStatus
FROM RMON-MIB
BridgeId, Timeout, dot1dBasePort, dot1dBasePortEntry
FROM BRIDGE-MIB
TruthValue, RowStatus, zeroDotZero,
RowPointer
FROM RADLAN-SNMPv2
JackType
FROM MAU-MIB
EnabledStatus
FROM P-BRIDGE-MIB
PortList
FROM Q-BRIDGE-MIB
dot3adAggIndex, dot3adAggPortIndex
FROM LAG-MIB
TimeInterval, DateAndTime
FROM SNMPv2-TC-v1
ipCidrRouteEntry,ipCidrRouteDest, ipCidrRouteMask,
ipCidrRouteTos, ipCidrRouteNextHop
FROM IP-FORWARD-MIB
bgpPeerEntry , bgpPeerRemoteAddr, bgp4PathAttrEntry,
bgp4PathAttrIpAddrPrefix, bgp4PathAttrIpAddrPrefixLen,
bgp4PathAttrPeer
FROM BGP4-MIB
MacAddress
FROM BRIDGE-MIB
dvmrpRouteNextHopEntry, dvmrpRouteNextHopSource,
dvmrpRouteNextHopSourceMask, dvmrpRouteNextHopIfIndex
FROM DVMRP-STD-MIB
Unsigned-32, Counter-32, Integer-32
FROM SNMPv2-SMI-v1
TEXTUAL-CONVENTION
FROM SNMPv2-TC
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
ospfIfEntry, AreaID, RouterID, ospfVirtIfEntry
FROM OSPF-MIB;
NetNumber ::= OCTET STRING (SIZE(4))
VlanPriority ::= INTEGER (0..7)
Percents ::= INTEGER (0..100)
RlStormCtrlRateUnit ::= INTEGER {
packetsPerSecond(1),
bytesPerSecond(2),
framesPerBuffer(3),
precentages(4),
kiloBytesPerSecond(5)
}
-- Some MIB compilers require that the following 7 lines which define the path
-- to RND MIB are commented out:
-- mib OBJECT IDENTIFIER ::= { mgmt 1 }
-- directory OBJECT IDENTIFIER ::= { internet 1 }
-- experimental OBJECT IDENTIFIER ::= { internet 3 }
-- private OBJECT IDENTIFIER ::= { internet 4 }
-- enterprises OBJECT IDENTIFIER ::= { private 1 }
rnd OBJECT IDENTIFIER ::= { enterprises 89 }
-- Objects in this MIB are arranged into groups:
--01 rndMng - Management/Action
--02 rndDeviceParams - General parameters
--04 rndInterface - Obsolete
--09 rndBackup - Obsolete
--12 rndIPX - Parameters for management of IPX router
--16 rndFACS - Obsolete
--20 rndCOD - Obsolete
--22 rndBrgHub - Obsolete
--23 rndAdapter - Obsolete
--24 rndBootP - BootP configurgaration.
--26 ipSpec - IP Private MIBs
--27 virtualLan - Obsolete
--28 rsConf - Obsolete
--29 rsTunning - Tunning sub group
--30 rndISDN - Obsolete
--31 rndPPP - Obsolete
--34 frameRelay - Obsolete
--35 rndApplications -
--38 rsDHCP - DHCP server configuration
--39 radWiz - Obsolete
--40 rsCfgUpgrade - Obsolete
--42 rsUDP -
--43 swInterfaces -
--44 securityZone - Obsolete
--45 rll3SwtchETMdl - Obsolete
--46 rlIPmulticast -
--47 rlFFT -
--48 vlan -
--49 rlRmonControl -
--50 rlBrgMacSwitch -
--51 rlExperience -
--52 rlCli -
--53 rlPhysicalDescription -
--54 rlIfInterfaces -
--55 rlMacMulticast -
--56 rlGalileo -
--57 rlpBridgeMIBObjects-
--58 rlTelnet -
--59 rlPolicy -
--60 rlArpSpoofing -
--61 rlMir -
--62 ipMRouteStdMIB -
--63 rl3sw2swTables -
--64 rlGvrp -
--65 rlDot3adAgg -
--66 rlEmbWeb -
--67 rlSwPackageVersion -
--68 rlBroadcom -
--69 rlMultiSessionTerminal -
--70 rlRCli -
--71 rlBgp -
--72 rlAgentsCapabilitiesGroups -
--73 rlAggregateVlan -
--74 rlLCli -
--75 rlGmrp -
--76 rlDhcpCl - Dhcp client
--77 rlStormCtrl -
--78 rlSsh -
--79 rlAAA -
--80 Radius -
--81 rlTraceRoute -
--82 rlSyslog -
--83 rlEnv - HardWare status indication
--84 rlSmon -
--85 rlSocket -
--86 rlDigitalKeyManage -
--87 rlCopy -
--88 rlQosCliMib -
--89 rlMngInf -
--90 rlPhy -
--91 rlJumboFrames -
--92 rlTimeSynchronization
--93 rlDnsCl - Dns client
--94 rlCDB
--95
-- At the end of the MIB there is a definition of all RND-specific traps.
-- rndMng group contains Management Variables for RND devices
rndMng OBJECT IDENTIFIER ::= { rnd 1 }
rndSysId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Identification of an RND device. The device type for each
integer clarifies the sysObjectID in MIB - II."
::= { rndMng 1 }
rndAction OBJECT-TYPE
SYNTAX INTEGER {
reset(1),
sendNetworkTab(2),
deleteNetworkTab(3),
sendRoutingTab(4), -- Level II
deleteRoutingTab(5),
sendLanTab(6),
deleteLanTab(7),
deleteArpTab(8),
sendArpTab(9),
deleteRouteTab(10), -- Level III
sendRouteTab(11),
backupSPFRoutingTab(12),
backupIPRoutingTab(13),
backupNetworkTab(14),
backupLanTab(15),
backupArpTab(16),
backupIPXRipTab(17),
backupIPXSAPTab(18),
resetCDB(19),
eraseCDB(20),
deleteZeroHopRoutingAllocTab(21),
slipDisconnect(22),
deleteDynamicLanTab(23)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable enables the operator to perform one of the
specified actions on the tables maintained by the network device.
Send actions require support of proprietery File exchange
protocol."
::= { rndMng 2 }
rndFileName OBJECT-TYPE
SYNTAX OCTET STRING -- SIZE 256
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The name of the file used internally by RND for transferring
tables maintained by network devices, using a prorietary File
exchange protocol."
::= { rndMng 3 }
rlSnmpVersionSupported OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the snmp versions that are supported by
this device."
::= { rndMng 4 }
rlSnmpMibVersion OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the snmp support version that is supported by
this device."
::= { rndMng 5 }
-- rndDeviceParams group contains a number of general variables
rndDeviceParams OBJECT IDENTIFIER ::= { rnd 2 }
rndBridgeType OBJECT-TYPE
SYNTAX INTEGER {
reb(1),
ceb(2),
ceblb(3),
xeb(4),
xeb1(5),
rebsx(6),
rtb(7),
ltb(8),
tre(9),
rtre(10), -- remote TRE
xtb(11),
ete(12),
rete(13), -- remote ETE
ielb(30),
leb(31),
openGate12(32),
openGate4(33),
ran(34),
itlb(35),
gatelinx(36),
openGate2(37),
ogRanTR(38),
rdapter(39),
ogVan(40),
wanGate(41),
ogRubE(42),
ogRubT(43),
wanGateI(44),
vGate4(45),
lre(46),
mrt(47),
vGate2(48)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Identification of the RND bridge type."
::= { rndDeviceParams 1 }
rndInactiveArpTimeOut OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable defines the maximum time period that can pass
between ARP requests concerning an entry in the ARP table.
After this time period, the entry is deleted from the table."
::= { rndDeviceParams 2 }
-- The following two variables define the format of RND specific
-- error messages issued by the RND devices
rndBridgeAlarm OBJECT IDENTIFIER ::= { rndDeviceParams 3 }
rndErrorDesc OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A textual description of the enterprise-specific trap sent
to the Network Management Station by the RND managed device."
::= { rndBridgeAlarm 1 }
rndErrorSeverity OBJECT-TYPE
SYNTAX INTEGER {
info(0),
warning(1),
error(2),
fatal-error(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The severity type of the enterprise-specific trap sent to the
Network Management Station by the RND managed device."
::= { rndBridgeAlarm 2 }
rndBrgVersion OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The bridge version."
::= { rndDeviceParams 4 }
rndBrgFeatures OBJECT-TYPE
SYNTAX OCTET STRING -- SIZE 20
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A bit mask that defines the features supported by a particular configuration
of this network element:
__________________________________________
| Byte 1|Byte 2 |Byte 3 | ....|Byte 20 |
|87654321| | 87654321|
|________|_______________________________|
Byte1 :
bit1: TX Block mask
bit2: Source Routing Encapulation
bit3: SNA/SDLC
bit4: Frame Relay
bit5: SNMP
bit6: LAN Manager
bit7: High Performance
bit8: Translation
Byte2 :
bit1: DEC Router
bit2: IPX Router
bit3: IP Router
Byte3 :
bit1: Dial Up Backup
bit2: COD
bit3: FACS
bit4: Load Balance
bit5: Remote Configuration
bit6: RIP 2
bit7: OSPF
bit8: IPX RIP/SAP Filter
Byte4 :
bit1: BootP Server
bit2: BootP Client
bit3: Compression
bit4: V25.bis
bit5: ISDN
bit6: CODv2
bit7: NSPF
bit8: UDP Relay
Byte5
bit1:VirtualLAN
bit2:Static IP Multicast
bit3:IP Redundancy
bit4:CCM2
bit5:ISDN Bonding
bit6:Backup Link Selection -- for the VAN/Rdapter ver 4.0
bit7:IP/IPX Forwarding -- for the WANgate ver 4.0
bit8:Improved COD
Byte6
bit1: Server Disptacher
bit2: ISDN_US -- for the VANSX/WANGATE ver 5.0
bit3: PPP
bit4: IP Rip Filter -- for Vgate3
bit5: Zero Hop Routing -- for Vgate3
bit6: ISDN Japan
bit7: PPP-Security
Byte7
bit1: With unmanaged Switch
bit2: 2 LANs
bit3: OSPF Ver 2.0
bit4: FACS Ver 2.0
bit5: Multiple WEB Farm
bit6: Backup Server
bit7: Check Connectivity
bit8: WSD multiplexing
Byte8
bit1: MRT3
bit2: WSD Redundancy
bit3: DHCP Server
bit4: WSD Connection Limit
bit5: WSD Distributed System
bit6: WSD Load Report
bit7: WSD super farm
bit8: RadWiz leased line
Byte9
bit1: PPP IP address negotiaton
bit2: DNS
bit3: Nat
bit4: WSD Static proximity
bit5: WSD Dynamic proximity
bit6: WSD Proxy
bit7: WSD Proximity client
bit8: MAC Load balancing
Byte10
bit1: Unnum Inf
bit2: Power Supply redundancy
bit3: MRT PPP Compression
bit4: ZHR Apolo
bit5: Copy port
bit6: UDP Relay 2.0
bit7: NVRAM
bit8: URL table
Byte11
bit1: URL super farm
bit2: NAT on LAN
bit3: Remote Con
bit4: AP5000
bit5: Session tracking
bit6: Mirroring
bit7: Alias IP
bit8: CSD Nat
Byte12
bit1: content check
bit2: mlb virtual ip
bit3: reserved RadLan
bit4: csd nat exception
bit5: statistics monitor
bit6: reserved-for-radware "
::= { rndDeviceParams 5 }
rndBrgLicense OBJECT-TYPE
SYNTAX OCTET STRING -- SIZE 20
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This parameter is used for entering a s/w license number for a device.
A separate license number is supplied for each device."
::= { rndDeviceParams 6 }
-- IP Host Parameters
--All the new parameters under this section will be added to the
-- rndMng group, as rndIpHost sub-group.
--
rndIpHost OBJECT IDENTIFIER ::= { rndDeviceParams 7 }
--
--ICMP Transmission Enable\Disable
--The new variable will be
rndICMPTransmitionEnable OBJECT-TYPE -- ROS: isn't supported
SYNTAX INTEGER {
enable(1),
disable(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable controlls the ability to transmit ICMP frames"
::= { rndIpHost 1 }
rndCommunityTable OBJECT-TYPE
SYNTAX SEQUENCE OF RndCommunityEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The community table of the agent"
::= { rndIpHost 2 }
rndCommunityEntry OBJECT-TYPE
SYNTAX RndCommunityEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" The row definition for this table."
INDEX { rndCommunityMngStationAddr,
IMPLIED rndCommunityString }
::= { rndCommunityTable 1 }
RndCommunityEntry ::= SEQUENCE {
rndCommunityMngStationAddr IpAddress,
rndCommunityString DisplayString,
rndCommunityAccess INTEGER,
rndCommunityTrapsEnable INTEGER,
rndCommunityStatus INTEGER,
rndCommunityPortSecurity INTEGER,
rndCommunityOwner DisplayString,
rndCommunityTrapDestPort INTEGER
}
rndCommunityMngStationAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The management station that will be allowed to
communicate with the agent IP address"
::= { rndCommunityEntry 1 }
rndCommunityString OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..20))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The community string with which the management
station will communicate with the agent"
::= { rndCommunityEntry 2 }
rndCommunityAccess OBJECT-TYPE
SYNTAX INTEGER {
readOnly(1),
readWrite(2),
super(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The allowed access to this management station"
::= { rndCommunityEntry 3}
rndCommunityTrapsEnable OBJECT-TYPE
SYNTAX INTEGER {
snmpV1(1),
snmpV2(2),
snmpV3(3),
trapsDisable(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Should the agent send traps to the management station,
and what version is required"
::= { rndCommunityEntry 4 }
rndCommunityStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
invalid(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The status of this entry. If the status is invalid the
community entry will be deleted"
::= { rndCommunityEntry 5 }
rndCommunityPortSecurity OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"If enabled the device will only receive SNMP messages from the port,
through which this NMS is reachable from the device."
DEFVAL { disabled }
::= { rndCommunityEntry 6 }
rndCommunityOwner OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The owner of this community"
::= { rndCommunityEntry 7 }
rndCommunityTrapDestPort OBJECT-TYPE
SYNTAX INTEGER(0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The transport protocol (usually UDP) port to which traps to the
management station represebted by this entry will be sent. The default
is the well-known IANA assigned port number for SNMP traps.
This object is relevant only if rndCommunityTrapsEnable has a value
different from trapsDisable."
DEFVAL { 162 }
::= { rndCommunityEntry 8 }
rlMridTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlMridEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The MRID related configurations table of the agent"
::= { rndIpHost 3 }
rlMridEntry OBJECT-TYPE
SYNTAX RlMridEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" The row definition for this table."
INDEX { rndCommunityMngStationAddr,
IMPLIED rndCommunityString }
::= { rlMridTable 1 }
RlMridEntry ::= SEQUENCE {
rlMridConnection INTEGER,
rlManagedMrid INTEGER
}
rlMridConnection OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The router instance connecting the NMS who accessed the agent
through the community table entry corresponding to the keys of this entry."
::= { rlMridEntry 1 }
rlManagedMrid OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The router instance currently managed by the NMS who accessed the agent
through the community table entry corresponding to the keys of this entry "
::= { rlMridEntry 2 }
rndManagedTime OBJECT-TYPE
SYNTAX DisplayString (SIZE(6))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The time will be sent in the format hhmmss"
::= { rndDeviceParams 8 }
rndManagedDate OBJECT-TYPE
SYNTAX DisplayString (SIZE(6))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The date will be sent in the format ddmmyy"
::= { rndDeviceParams 9 }
rndBaseBootVersion OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Defines the boot version of the product."
::= { rndDeviceParams 10 }
genGroup OBJECT IDENTIFIER ::= { rndDeviceParams 11 }
genGroupHWVersion OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Defines the HW version of the product."
::= { genGroup 1 }
genGroupConfigurationSymbol OBJECT-TYPE
SYNTAX DisplayString (SIZE(1))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Defines the Configuration Symbol attached to any hardware module
manufactured by LANNET. One single character A..Z defines the CS
version."
::= { genGroup 2 }
genGroupHWStatus OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
hardwareProblems(2),
notSupported(255)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute describes the status of the group hardware as detected
by the sensors software."
::= { genGroup 3 }
rndBasePhysicalAddress OBJECT-TYPE
SYNTAX PhysAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Base physical (MAC) address of the device."
::= { rndDeviceParams 12 }
rndSoftwareFile OBJECT IDENTIFIER ::= { rndDeviceParams 13 }
rndActiveSoftwareFileTable OBJECT-TYPE
SYNTAX SEQUENCE OF RndActiveSoftwareFileEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" The (conceptual) table listing the active software file of the
requested unit."
::= {rndSoftwareFile 1 }
rndActiveSoftwareFileEntry OBJECT-TYPE
SYNTAX RndActiveSoftwareFileEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" An entry (conceptual row) in the rndActiveSoftwareFileTable."
INDEX {rndUnitNumber }
::= {rndActiveSoftwareFileTable 1 }
RndActiveSoftwareFileEntry ::= SEQUENCE {
rndUnitNumber INTEGER,
rndActiveSoftwareFile INTEGER,
rndActiveSoftwareFileAfterReset INTEGER
}
rndUnitNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The unit number (for stackable devices) or 1 for 'stand alone' device."
::= {rndActiveSoftwareFileEntry 1 }
rndActiveSoftwareFile OBJECT-TYPE
SYNTAX INTEGER {
image1(1),
image2(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the current active software file, image1 or image2."
::= {rndActiveSoftwareFileEntry 2 }
rndActiveSoftwareFileAfterReset OBJECT-TYPE
SYNTAX INTEGER {
image1(1),
image2(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates the software file that will be active after reset
(image 1 or image2)."
::= {rndActiveSoftwareFileEntry 3 }
-- Obsolete
-- rndInterface OBJECT IDENTIFIER ::= { rnd 4 }
-- Obsolete
-- rndBackup OBJECT IDENTIFIER ::= { rnd 9 }
rndIPX OBJECT IDENTIFIER ::= { rnd 12 }
rndIPXdriver OBJECT IDENTIFIER ::= { rndIPX 1 }
rndIPXRip OBJECT IDENTIFIER ::= { rndIPX 2 }
-- Global RIP filter is defined per IPX router.
rndIPXRipFilterGlbTable OBJECT-TYPE
SYNTAX SEQUENCE OF RndIPXRipFilterGlbEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The table of RIP global filters per IPX router."
::= { rndIPXRip 10 }
rndIPXRipFilterGlbEntry OBJECT-TYPE
SYNTAX RndIPXRipFilterGlbEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" An entry in the RIP global filter table "
INDEX { rndIPXRipFilterGlbFLtype,
rndIPXRipFilterGlbFLnumber }
::= { rndIPXRipFilterGlbTable 1 }
RndIPXRipFilterGlbEntry ::= SEQUENCE {
rndIPXRipFilterGlbFLtype INTEGER,
rndIPXRipFilterGlbFLnumber INTEGER,
rndIPXRipFilterGlbFLStatus INTEGER,
rndIPXRipFilterGlbFLnetworkPatern OCTET STRING (SIZE(4)),
rndIPXRipFilterGlbFLnetworkMask OCTET STRING (SIZE(4)),
rndIPXRipFilterGlbFLaction INTEGER
}
rndIPXRipFilterGlbFLtype OBJECT-TYPE
SYNTAX INTEGER {
input(1),
output(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Type of filter - input/output "
::= {rndIPXRipFilterGlbEntry 1}
rndIPXRipFilterGlbFLnumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of RIP filter. "
::= {rndIPXRipFilterGlbEntry 2}
rndIPXRipFilterGlbFLStatus OBJECT-TYPE
SYNTAX INTEGER {
valid (1),
invalid (2),
underCreation (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The validity of this entry. An entry with this value set
to invalid may be deleted from the table with IPX
implementation's discretion."
DEFVAL { valid }
::= {rndIPXRipFilterGlbEntry 3}
rndIPXRipFilterGlbFLnetworkPatern OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Number of filtered network. Value 0xFFFFFFFF applies for
any network. "
DEFVAL {'FFFFFFFF'H}
::= {rndIPXRipFilterGlbEntry 4}
rndIPXRipFilterGlbFLnetworkMask OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Network mask"
DEFVAL {'FFFFFFFF'H}
::= {rndIPXRipFilterGlbEntry 5}
rndIPXRipFilterGlbFLaction OBJECT-TYPE
SYNTAX INTEGER {
deny(1),
permit(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Filter action - permit/deny for this network"
DEFVAL { permit }
::= {rndIPXRipFilterGlbEntry 6}
-- Circuit RIP filter is defined per IPX circuit number
-- (Ifindex plus type of L2 encapsulation).
rndIPXRipFilterCircuitTable OBJECT-TYPE
SYNTAX SEQUENCE OF RndIPXRipFilterCircuitEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of input/output RIP filters used per IPX circuit number."
::= { rndIPXRip 11 }
rndIPXRipFilterCircuitEntry OBJECT-TYPE
SYNTAX RndIPXRipFilterCircuitEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" An entry in the Circuit RIP filter table"
INDEX {rndIPXRipFilterCircFLIfIndex ,
rndIPXRipFilterCircFLType,
rndIPXRipFilterCircFLnumber}
::= { rndIPXRipFilterCircuitTable 1 }
RndIPXRipFilterCircuitEntry ::= SEQUENCE {
rndIPXRipFilterCircFLIfIndex INTEGER,
rndIPXRipFilterCircFLType INTEGER,
rndIPXRipFilterCircFLnumber INTEGER,
rndIPXRipFilterCircFLStatus INTEGER,
rndIPXRipFilterCircFLnetworkPatern OCTET STRING (SIZE(4)),
rndIPXRipFilterCircFLnetworkMask OCTET STRING (SIZE(4)),
rndIPXRipFilterCircFLaction INTEGER
}
rndIPXRipFilterCircFLIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The Interface identifier for this filter. This value
correspond to rndIPXIfIndex or ipxCircIndex for ET16"
::= {rndIPXRipFilterCircuitEntry 1}
rndIPXRipFilterCircFLType OBJECT-TYPE
SYNTAX INTEGER {
input(1),
output(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Type of filter - input/output "
::= {rndIPXRipFilterCircuitEntry 2}
rndIPXRipFilterCircFLnumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of RIP filter for this circuit"
::= {rndIPXRipFilterCircuitEntry 3}
rndIPXRipFilterCircFLStatus OBJECT-TYPE
SYNTAX INTEGER {
valid (1),
invalid (2),
underCreation (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The validity of this entry. An entry with this value set
to invalid may be deleted from the table with IPX
implementation's discretion."
DEFVAL { valid }
::= {rndIPXRipFilterCircuitEntry 4}
rndIPXRipFilterCircFLnetworkPatern OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Number of filtered network. Value 0xFFFFFFFF applies for
any network. "
DEFVAL {'FFFFFFFF'H}
::= {rndIPXRipFilterCircuitEntry 5}
rndIPXRipFilterCircFLnetworkMask OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Network mask"
DEFVAL { 'FFFFFFFF'H }
::= {rndIPXRipFilterCircuitEntry 6}
rndIPXRipFilterCircFLaction OBJECT-TYPE
SYNTAX INTEGER {
deny(1),
permit(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Filter action - permit/deny "
DEFVAL { permit }
::= {rndIPXRipFilterCircuitEntry 7}
-- Service Advertising Protocol
rndIPXSap OBJECT IDENTIFIER ::= { rndIPX 3 }
rndIPXSapFilterGlbTable OBJECT-TYPE
SYNTAX SEQUENCE OF RndIPXSapFilterGlbEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The table of SAP global filter susedper IPX router."
::= {rndIPXSap 10}
rndIPXSapFilterGlbEntry OBJECT-TYPE
SYNTAX RndIPXSapFilterGlbEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the SAP global filter table"
INDEX{rndIPXSapFilterGlbFLtype,
rndIPXSapFilterGlbFLnumber}
::= {rndIPXSapFilterGlbTable 1}
RndIPXSapFilterGlbEntry ::= SEQUENCE{
rndIPXSapFilterGlbFLtype INTEGER,
rndIPXSapFilterGlbFLnumber INTEGER,
rndIPXSapFilterGlbFLStatus INTEGER,
rndIPXSapFilterGlbFLnetworkPatern OCTET STRING (SIZE(4)),
rndIPXSapFilterGlbFLnetworkMask OCTET STRING (SIZE(4)),
rndIPXSapFilterGlbFLserviceType INTEGER,
rndIPXSapFilterGlbFLserviceName OCTET STRING (SIZE(1..48)),
rndIPXSapFilterGlbFLaction INTEGER
}
rndIPXSapFilterGlbFLtype OBJECT-TYPE
SYNTAX INTEGER{
input(1),
output(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Type of filter-input/output"
::= {rndIPXSapFilterGlbEntry 1}
rndIPXSapFilterGlbFLnumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of SAP filter."
::= {rndIPXSapFilterGlbEntry 2}
rndIPXSapFilterGlbFLStatus OBJECT-TYPE
SYNTAX INTEGER{
valid(1),
invalid(2),
underCreation(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The validity of this entry. An entry with this value set
to invalid may be deleted from the table with IPX
implementation's discretion."
DEFVAL { 1 }
::= {rndIPXSapFilterGlbEntry 3}
rndIPXSapFilterGlbFLnetworkPatern OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Number network of the filter edservice. Value
0xFFFFFFFF applies for any network."
DEFVAL {'FFFFFFFF'H}
::= {rndIPXSapFilterGlbEntry 4}
rndIPXSapFilterGlbFLnetworkMask OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Network mask"
DEFVAL {'FFFFFFFF'H}
::= {rndIPXSapFilterGlbEntry 5}
rndIPXSapFilterGlbFLserviceType OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The type of the service which may be filtered ;value0xFFFF
applies for all types of service and it's default"
DEFVAL {'FFFF'H}
::= {rndIPXSapFilterGlbEntry 6}
rndIPXSapFilterGlbFLserviceName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..48))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The name of the service which may be filtered; wild
cardas * may be used in end of the name."
DEFVAL {"*"}
::= {rndIPXSapFilterGlbEntry 7}
rndIPXSapFilterGlbFLaction OBJECT-TYPE
SYNTAX INTEGER{
deny(1),
permit(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Filter mode - permit/deny for this service"
DEFVAL {permit}
::= {rndIPXSapFilterGlbEntry 8}
-- Circuit SAP filter is defined per IPX circuit (interface identifier (Ifindex) plus
-- type of L2 encapsulation).
rndIPXSapFilterCircuitTable OBJECT-TYPE
SYNTAX SEQUENCE OF RndIPXSapFilterCircuitEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of input/output SAP filter susedper IPX circuit number."
::= {rndIPXSap 11 }
rndIPXSapFilterCircuitEntry OBJECT-TYPE
SYNTAX RndIPXSapFilterCircuitEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the Circuit SAP filter table"
INDEX { rndIPXSapFilterCircFLIfIndex,
rndIPXSapFilterCircFLtype,
rndIPXSapFilterCircFLnumber}
::= {rndIPXSapFilterCircuitTable 1 }
RndIPXSapFilterCircuitEntry ::= SEQUENCE{
rndIPXSapFilterCircFLIfIndex INTEGER,
rndIPXSapFilterCircFLtype INTEGER,
rndIPXSapFilterCircFLnumber INTEGER,
rndIPXSapFilterCircFLStatus INTEGER,
rndIPXSapFilterCircFLnetworkPatern OCTET STRING (SIZE(4)),
rndIPXSapFilterCircFLnetworkMask OCTET STRING (SIZE(4)),
rndIPXSapFilterCircFLserviceType INTEGER,
rndIPXSapFilterCircFLserviceName OCTET STRING (SIZE(1..48)),
rndIPXSapFilterCircFLaction INTEGER
}
rndIPXSapFilterCircFLIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Interface identifier for this filter. This value
correspondtornd IPXIfIndex or ipxCircIndex for ET16"
::= {rndIPXSapFilterCircuitEntry 1}
rndIPXSapFilterCircFLtype OBJECT-TYPE
SYNTAX INTEGER{
input(1),
output(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Type of filter-input/output"
::= {rndIPXSapFilterCircuitEntry 2}
rndIPXSapFilterCircFLnumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of SAP filter. Th is value correspondto rndIPXSapFilterNumber"
::= {rndIPXSapFilterCircuitEntry 3}
rndIPXSapFilterCircFLStatus OBJECT-TYPE
SYNTAX INTEGER{
valid(1),
invalid(2),
underCreation(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The validity of this entry. An entry with this value set
to invalid may be deleted from the table with IPX implementation's discretion."
DEFVAL { 1 }
::= {rndIPXSapFilterCircuitEntry 4}
rndIPXSapFilterCircFLnetworkPatern OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Number network of the filtered service. Value
0xFFFFFFFF applies for any network."
DEFVAL {'FFFFFFFF'H}
::= {rndIPXSapFilterCircuitEntry 5}
rndIPXSapFilterCircFLnetworkMask OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Network mask"
DEFVAL {'FFFFFFFF'H}
::= {rndIPXSapFilterCircuitEntry 6}
rndIPXSapFilterCircFLserviceType OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The type of the service which may be filtered; value 0xFFFF
applies for all types of service and it's default"
DEFVAL {'FFFF'H}
::= {rndIPXSapFilterCircuitEntry 7}
rndIPXSapFilterCircFLserviceName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..48))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The name of the service which may be filtered; wild
cardas * may be used i n end of the name."
DEFVAL {"*"}
::= {rndIPXSapFilterCircuitEntry 8}
rndIPXSapFilterCircFLaction OBJECT-TYPE
SYNTAX INTEGER{
deny(1),
permit(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Filter mode-permit/deny"
DEFVAL {permit}
::= {rndIPXSapFilterCircuitEntry 9}
--
-- This MIB defines the management information for a system using the IPX
-- protocol. The MIB consists of four groups:
--
-- 1. System Group - contains general information about all instances
-- of IPX on the system
--
-- 2. Circuit Group - contains information about all circuits used by
-- IPX on the system
--
-- 3. Forwarding Group - contains generic routing information that
-- must be provided by any IPX routing protocol.
--
-- 4. Services Group - contains information about all known services.
--
-- The MIB is designed to support multiple instances of the IPX
-- protocol on one system via a system instance identifier which is the
-- primary index for every table in this MIB.
--
-- This MIB is designed to provide a basic framework for the management
-- of systems implementing the IPX protocol. Additional MIBs may be
-- created (especially in the area of IPX routing protocols) to contain
-- more specific information. Whenever possible, these additional MIBs
-- should follow the format of this IPX MIB. Information in these MIBs
-- should be linked to this MIB via the use of the system instance
-- identifier mentioned above.
--
-- System Group
-- This group contains global information about each instance of IPX
-- running on one system.
ipxSystem OBJECT IDENTIFIER ::= {rndIPX 4}
-- Basic System Table
-- This table contains one entry for each instance of IPX running on
-- the system. It contains the management information that should
-- be made available by all implementations of the IPX protocol.
ipxBasicSysTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpxBasicSysEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "The IPX System table - basic information."
::= {ipxSystem 1}
ipxBasicSysEntry OBJECT-TYPE
SYNTAX IpxBasicSysEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "Each entry corresponds to one instance of IPX running
on the system."
INDEX {ipxBasicSysInstance}
::= {ipxBasicSysTable 1}
IpxBasicSysEntry ::= SEQUENCE {
ipxBasicSysInstance INTEGER,
ipxBasicSysExistState INTEGER,
ipxBasicSysInReceives Counter,
ipxBasicSysInHdrErrors Counter,
ipxBasicSysInUnknownSockets Counter,
ipxBasicSysInDiscards Counter,
ipxBasicSysInDelivers Counter,
ipxBasicSysNoRoutes Counter,
ipxBasicSysOutRequests Counter,
ipxBasicSysOutMalformedRequests Counter,
ipxBasicSysOutDiscards Counter,
ipxBasicSysOutPackets Counter
}
ipxBasicSysInstance OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION "The unique identifier of the instance of IPX to which this
row corresponds. This value may be written only when
creating a new entry in the table."
::= {ipxBasicSysEntry 1}
ipxBasicSysExistState OBJECT-TYPE
SYNTAX INTEGER {
off(1),
on(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION "The validity of this entry in the IPX system table.
Setting this field to off indicates that this entry may be
deleted from the system table at the IPX implementation's
discretion."
::= {ipxBasicSysEntry 2}
ipxBasicSysInReceives OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION "The total number of IPX packets received, including
those received in error."
::= {ipxBasicSysEntry 3}
ipxBasicSysInHdrErrors OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION "The number of IPX packets discarded due to errors in
their headers, including any IPX packet with a size less
than the minimum of 30 bytes."
::= {ipxBasicSysEntry 4}
ipxBasicSysInUnknownSockets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION "The number of IPX packets discarded because the
destination socket was not open."
::= {ipxBasicSysEntry 5}
ipxBasicSysInDiscards OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION "The number of IPX packets received but discarded due to
reasons other than those accounted for by
ipxBasicSysInHdrErrors, ipxBasicSysInUnknownSockets,
ipxAdvSysInDiscards, and ipxAdvSysInCompressDiscards."
::= {ipxBasicSysEntry 6}
ipxBasicSysInDelivers OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION "The total number of IPX packets delivered locally,
including packets from local applications."
::= {ipxBasicSysEntry 7}
ipxBasicSysNoRoutes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION "The number of times no route to a destination was
found."
::= {ipxBasicSysEntry 8}
ipxBasicSysOutRequests OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION "The number of IPX packets supplied locally for
transmission, not including any packets counted in
ipxAdvForwPackets."
::= {ipxBasicSysEntry 9}
ipxBasicSysOutMalformedRequests OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION "The number of IPX packets supplied locally that contained
errors in their structure."
::= {ipxBasicSysEntry 10}
ipxBasicSysOutDiscards OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION "The number of outgoing IPX packets discarded due to
reasons other than those accounted for in
ipxBasicSysOutMalformedRequests, ipxAdvSysOutFiltered,
and ipxAdvSysOutCompressDiscards."
::= {ipxBasicSysEntry 11}
ipxBasicSysOutPackets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION "The total number of IPX packets transmitted."
::= {ipxBasicSysEntry 12}
-- Circuit Group
-- This group contains management information for each circuit known
-- to this system.
ipxCircuit OBJECT IDENTIFIER ::= {rndIPX 5}
-- Circuit Table
-- The Circuit table contains an entry for each circuit known to the
-- system.
ipxCircTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpxCircEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "The Circuit table."
::= {ipxCircuit 1}
ipxCircEntry OBJECT-TYPE
SYNTAX IpxCircEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "Each entry corresponds to one circuit known to the
system."
INDEX {ipxCircSysInstance,
ipxCircIndex }
::= {ipxCircTable 1}
IpxCircEntry ::= SEQUENCE {
ipxCircSysInstance INTEGER,
ipxCircIndex INTEGER,
ipxCircExistState INTEGER,
ipxCircOperState INTEGER,
ipxCircIfIndex INTEGER,
ipxCircNetNumber NetNumber,
ipxCircTimeToNet INTEGER,
ipxCircEncaps INTEGER,
ipxCircNetbiosDeliver INTEGER
}
ipxCircSysInstance OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION "The unique identifier of the instance of IPX
to which this entry corresponds. This value may be
written only when creating a new entry in the table."
::= {ipxCircEntry 1}
ipxCircIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION "The identifier of this circuit, unique within the
instance of IPX. This value may be written
only when creating a new entry in the table."
::= {ipxCircEntry 2}
ipxCircExistState OBJECT-TYPE
SYNTAX INTEGER {
off(1),
on(2),
sleeping(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION "The validity of this circuit entry. A circuit with this
value set to off may be deleted from the table at the
IPX implementation's discretion."
::= {ipxCircEntry 3}
ipxCircOperState OBJECT-TYPE
SYNTAX INTEGER {
down(1),
up(2),
dormant(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION "The operational state of the circuit."
::= {ipxCircEntry 4}
ipxCircIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION "The value of ifIndex for the interface used by this
circuit. This value may be written only when creating
a new entry in the table."
::= {ipxCircEntry 5}
ipxCircNetNumber OBJECT-TYPE
SYNTAX NetNumber
ACCESS read-write
STATUS mandatory
DESCRIPTION "The IPX network number of this circuit. This value may
be written only when creating a new entry in the table."
::= {ipxCircEntry 6}
ipxCircTimeToNet OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The time to net value associated with this interface, in
term of 1/18ths of a second."
::= {ipxCircEntry 7}
ipxCircEncaps OBJECT-TYPE
SYNTAX INTEGER {
novell(1),
ethernet(2),
llc(3),
snap(4),
none(10)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The encapsulation method associated with this interface."
::= {ipxCircEntry 8}
ipxCircNetbiosDeliver OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Deliver NetBios All Networks Broadcast Packets "
DEFVAL { enabled }
::= {ipxCircEntry 9}
-- Forwarding Group
-- This group provides a representation of the forwarding database used
-- by all instances of IPX on the system.
ipxForwarding OBJECT IDENTIFIER ::= {rndIPX 6}
-- Destination Table
-- The Destination table contains information about all known
-- destinations. The routing information shown in this table represents
-- the path currently being used to reach the destination.
ipxDestTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpxDestEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "The Destination table contains information about all
known destinations."
::= {ipxForwarding 1}
ipxDestEntry OBJECT-TYPE
SYNTAX IpxDestEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "Each entry corresponds to one destination."
INDEX { ipxDestSysInstance,
ipxDestNetNum,
ipxDestNextHopCircIndex}
::= {ipxDestTable 1}
IpxDestEntry ::= SEQUENCE {
ipxDestSysInstance INTEGER,
ipxDestNetNum NetNumber,
ipxDestNextHopCircIndex INTEGER,
ipxDestProtocol INTEGER,
ipxDestTicks INTEGER,
ipxDestHopCount INTEGER,
ipxDestNextHopNICAddress PhysAddress,
ipxDestNextHopNetNum NetNumber,
ipxDestExistState INTEGER
}
ipxDestSysInstance OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION "The unique identifier of the instance of IPX
to which this row corresponds."
::= {ipxDestEntry 1}
ipxDestNetNum OBJECT-TYPE
SYNTAX NetNumber
ACCESS read-only
STATUS mandatory
DESCRIPTION "The IPX network number of the destination."
::= {ipxDestEntry 2}
ipxDestNextHopCircIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION "The unique identifier of the circuit used to reach the
next hop."
::= {ipxDestEntry 3}
ipxDestProtocol OBJECT-TYPE
SYNTAX INTEGER {
other(1),
local(2),
rip(3),
nlsp(4),
static(5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION "The routing protocol from which knowledge of this
destination was obtained."
::= {ipxDestEntry 4}
ipxDestTicks OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION "The delay in ticks to reach this destination."
::= {ipxDestEntry 5}
ipxDestHopCount OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION "The number of hops necessary to reach the destination."
::= {ipxDestEntry 6}
ipxDestNextHopNICAddress OBJECT-TYPE
SYNTAX PhysAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION "The NIC address of the next hop."
::= {ipxDestEntry 7}
ipxDestNextHopNetNum OBJECT-TYPE
SYNTAX NetNumber
ACCESS read-write
STATUS mandatory
DESCRIPTION "The IPX network number of the next hop."
::= {ipxDestEntry 8}
ipxDestExistState OBJECT-TYPE
SYNTAX INTEGER {
off(1),
on(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION "The validity of this entry. An entry with this
value set to off may be deleted from the table at the
IPX implementation's discretion."
::= {ipxDestEntry 9}
-- Services Group
-- The Services group contains management information for all known
-- services.
ipxServices OBJECT IDENTIFIER ::= {rndIPX 7}
-- Services Table
-- This table contains the services information indexed by service
-- name and type.
ipxServTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpxServEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "The table of services, indexed by name and type."
::= {ipxServices 1}
ipxServEntry OBJECT-TYPE
SYNTAX IpxServEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "Each entry corresponds to one service."
INDEX {
ipxServSysInstance,
ipxServType,
IMPLIED ipxServName
}
::= {ipxServTable 1}
IpxServEntry ::= SEQUENCE {
ipxServSysInstance INTEGER,
ipxServType OCTET STRING,
ipxServName OCTET STRING,
ipxServProtocol INTEGER,
ipxServNetNum NetNumber,
ipxServNode OCTET STRING,
ipxServSocket OCTET STRING,
ipxServHopCount INTEGER,
ipxServExistState INTEGER
}
ipxServSysInstance OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION "The unique identifier of the instance of IPX
to which this entry corresponds."
::= {ipxServEntry 1}
ipxServType OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(2))
ACCESS read-write
STATUS mandatory
DESCRIPTION "The service type."
::= {ipxServEntry 2}
ipxServName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..48))
ACCESS read-write
STATUS mandatory
DESCRIPTION "The service name."
::= {ipxServEntry 3}
ipxServProtocol OBJECT-TYPE
SYNTAX INTEGER {
other(1),
local(2),
nlsp(4),
static(5),
sap(6)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION "The protocol from which knowledge of this service was
obtained."
::= {ipxServEntry 4}
ipxServNetNum OBJECT-TYPE
SYNTAX NetNumber
ACCESS read-write
STATUS mandatory
DESCRIPTION "The IPX network number portion of the IPX address of the
service."
::= {ipxServEntry 5}
ipxServNode OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(6))
ACCESS read-write
STATUS mandatory
DESCRIPTION "The node portion of the IPX address of the service."
::= {ipxServEntry 6}
ipxServSocket OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(2))
ACCESS read-write
STATUS mandatory
DESCRIPTION "The socket portion of the IPX address of the service."
::= {ipxServEntry 7}
ipxServHopCount OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION "The number of hops to the service."
::= {ipxServEntry 8}
ipxServExistState OBJECT-TYPE
SYNTAX INTEGER {
off(1),
on(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION "The validity of this entry. An entry with this
value set to off may be deleted from the table at the
IPX implementation's discretion."
::= {ipxServEntry 9}
-- This sub-tree defines the management information for the RIP and SAP
-- protocols running in an IPX enviroment. It provides information in
-- addition to that contained in the IPX MIB itself. All tables in this
-- MIB are linked to an instance of IPX via the system instance
-- identifier as defined in the IPX MIB.
ripsap OBJECT IDENTIFIER ::= {rndIPX 8}
-- System Group
-- This group contains global information about each instance of
-- RIP/SAP running on one system.
ripsapSystem OBJECT IDENTIFIER ::= {ripsap 1}
-- RIP System Table
-- This table contains an entry for each instance of RIP
-- running on the system.
ripSysTable OBJECT-TYPE
SYNTAX SEQUENCE OF RipSysEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "The RIP system table."
::= {ripsapSystem 1}
ripSysEntry OBJECT-TYPE
SYNTAX RipSysEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "Each entry corresponds to one instance of RIP
running on the system."
INDEX {ripSysInstance}
::= {ripSysTable 1}
RipSysEntry ::= SEQUENCE {
ripSysInstance INTEGER,
ripSysState INTEGER,
ripSysIncorrectPackets Counter
}
ripSysInstance OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION "The unique identifier of the instance of RIP to
which this row corresponds. This value links the
instance of RIP to an instance of IPX running on the
system (i.e. the value of ripSysInstance should be the
same as a value of ipxSysInstance). This value may be
written only when creating a new entry in the table."
::= {ripSysEntry 1}
ripSysState OBJECT-TYPE
SYNTAX INTEGER {
off(1),
on(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION "Indicates the operational state of this instance of RIP."
::= {ripSysEntry 2}
ripSysIncorrectPackets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION "The number of times that an incorrectly formatted RIP
packet was received."
::= {ripSysEntry 3}
-- SAP System Table
-- This table contains an entry for each instance of SAP
-- running on the system.
sapSysTable OBJECT-TYPE
SYNTAX SEQUENCE OF SapSysEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "The SAP system table."
::= {ripsapSystem 2}
sapSysEntry OBJECT-TYPE
SYNTAX SapSysEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "Each entry corresponds to one instance of SAP
running on the system."
INDEX {sapSysInstance}
::= {sapSysTable 1}
SapSysEntry ::= SEQUENCE {
sapSysInstance INTEGER,
sapSysState INTEGER,
sapSysIncorrectPackets Counter
}
sapSysInstance OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION "The unique identifier of the instance of SAP to
which this row corresponds. This value links the
instance of SAP to an instance of IPX running on the
system (i.e. the value of SApSysInstance should be the
same as a value of ipxSysInstance). This value may be
written only when creating a new entry in the table."
::= {sapSysEntry 1}
sapSysState OBJECT-TYPE
SYNTAX INTEGER {
off(1),
on(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION "Indicates the operational state of this instance of SAP."
::= {sapSysEntry 2}
sapSysIncorrectPackets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION "The number of times that an incorrectly formatted SAP
packet was received."
::= {sapSysEntry 3}
-- Circuit Group
-- This group contains RIP and SAP management information for each
-- circuit known to this system.
ripsapCircuit OBJECT IDENTIFIER ::= {ripsap 2}
-- RIP Circuit Table
-- The RIP Circuit table contains an entry for the RIP information for
-- each circuit known to the system.
ripCircTable OBJECT-TYPE
SYNTAX SEQUENCE OF RipCircEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "The RIP Circuit table."
::= {ripsapCircuit 1}
ripCircEntry OBJECT-TYPE
SYNTAX RipCircEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "Each entry corresponds to one circuit known to the
system."
INDEX {ripCircSysInstance,
ripCircIndex
}
::= {ripCircTable 1}
RipCircEntry ::= SEQUENCE {
ripCircSysInstance INTEGER,
ripCircIndex INTEGER,
ripCircState INTEGER,
ripCircUpdate INTEGER,
ripCircAgeMultiplier INTEGER,
ripCircOutPackets Counter,
ripCircInPackets Counter
}
ripCircSysInstance OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION "The unique identifier of the instance of RIP and IPX
(via ipxSysInstance) to which this entry corresponds.
This value may be written only when creating a new entry in
the table."
::= {ripCircEntry 1}
ripCircIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION "The identifier of this circuit, unique within the
instance of RIP. This value corresponds to the circuit
identifier found in ipxCircIndex. This value may be
written only when creating a new entry in the table."
::= {ripCircEntry 2}
ripCircState OBJECT-TYPE
SYNTAX INTEGER {
off(1),
on(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION "Indicates whether RIP information may be sent/received
over this circuit."
DEFVAL { on }
::= {ripCircEntry 3}
ripCircUpdate OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION "The RIP periodic update interval, in seconds."
DEFVAL { 60 }
::= {ripCircEntry 4}
ripCircAgeMultiplier OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION "The holding multiplier for information received in RIP
periodic updates."
DEFVAL { 4 }
::= {ripCircEntry 5}
ripCircOutPackets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION "The number of RIP packets sent on this circuit."
::= {ripCircEntry 6}
ripCircInPackets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION "The number of RIP packets received on this circuit."
::= {ripCircEntry 7}
-- SAP Circuit Table
-- The SAP Circuit table contains an entry for the SAP information for
-- each circuit known to the system.
sapCircTable OBJECT-TYPE
SYNTAX SEQUENCE OF SapCircEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "The SAP Circuit table."
::= {ripsapCircuit 2}
sapCircEntry OBJECT-TYPE
SYNTAX SapCircEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "Each entry corresponds to one circuit known to the
system."
INDEX {sapCircSysInstance,
sapCircIndex }
::= {sapCircTable 1}
SapCircEntry ::= SEQUENCE {
sapCircSysInstance INTEGER,
sapCircIndex INTEGER,
sapCircState INTEGER,
sapCircUpdate INTEGER,
sapCircAgeMultiplier INTEGER,
sapCircGetNearestServerReply INTEGER,
sapCircOutPackets Counter,
sapCircInPackets Counter
}
sapCircSysInstance OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION "The unique identifier of the instance of SAP and IPX
(via ipxSysInstance) to which this entry corresponds.
This value may be written only when creating a new entry in
the table."
::= {sapCircEntry 1}
sapCircIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION "The identifier of this circuit, unique within the
instance of SAP. This value corresponds to the circuit
identifier found in ipxCircIndex. This value may be
written only when creating a new entry in the table."
::= {sapCircEntry 2}
sapCircState OBJECT-TYPE
SYNTAX INTEGER {
off(1),
on(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION "Indicates whether SAP information may be sent/received
over this circuit."
DEFVAL { off }
::= {sapCircEntry 3}
sapCircUpdate OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION "The SAP periodic update interval, in seconds."
DEFVAL { 60 }
::= {sapCircEntry 4}
sapCircAgeMultiplier OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION "The holding multiplier for information received in SAP
periodic updates."
DEFVAL { 4 }
::= {sapCircEntry 5}
sapCircGetNearestServerReply OBJECT-TYPE
SYNTAX INTEGER {
no(1),
yes(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION "Indicates whether to respond to SAP get nearest server
requests received on this circuit."
DEFVAL { yes }
::= {sapCircEntry 6}
sapCircOutPackets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION "The number of SAP packets sent on this circuit."
::= {sapCircEntry 7}
sapCircInPackets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION "The number of SAP packets received on this circuit."
::= {sapCircEntry 8}
-- Obsolete
-- rndFACS OBJECT IDENTIFIER ::= { rnd 16 }
-- Obsolete
-- rndCOD OBJECT IDENTIFIER ::= { rnd 20 }
-- Obsolete
-- rndBrgHub OBJECT IDENTIFIER ::= { rnd 22 }
-- Obsolete
-- rndAdapter OBJECT IDENTIFIER ::= { rnd 23 }
rndBootP OBJECT IDENTIFIER ::= { rnd 24 }
rndBootPServerAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The IPAddress of the BOOTP server. the OpenGate will act as a BootP relay if
this parameter is not equale to 0.0.0.0."
DEFVAL {'00000000'H}
::= { rndBootP 1 }
rndBootPRelaySecThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"BootP requests are relayed only if their SEC field is greater or
equal to the threshold value in order to allow local BootP Servers
to answer first."
::= { rndBootP 2 }
-- ip Specific group Addition parameters to ip group in MIB-2
ipSpec OBJECT IDENTIFIER ::= { rnd 26 }
rsIpAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF RsIpAddrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table is parralel to MIB II IpAddrTable, and is used to
add/delete entries to/from that table. In addition it contains
private objects."
::= { ipSpec 1 }
rsIpAddrEntry OBJECT-TYPE
SYNTAX RsIpAddrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The addressing information for one of this
entity's IP addresses."
INDEX {rsIpAdEntAddr}
::= { rsIpAddrTable 1 }
RsIpAddrEntry ::= SEQUENCE {
rsIpAdEntAddr IpAddress,
rsIpAdEntIfIndex INTEGER,
rsIpAdEntNetMask IpAddress,
rsIpAdEntForwardIpBroadcast INTEGER,
rsIpAdEntBackupAddr IpAddress, -- obsolete
rsIpAdEntStatus INTEGER,
rsIpAdEntBcastAddr INTEGER,
rsIpAdEntArpServer INTEGER,
rsIpAdEntName DisplayString,
rsIpAdEntOwner INTEGER,
rsIpAdEntAdminStatus INTEGER,
rsIpAdEntOperStatus INTEGER
}
rsIpAdEntAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IP address to which this entry's addressing
information pertains."
::= { rsIpAddrEntry 1 }
rsIpAdEntIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The index value which uniquely identifies the
interface to which this entry is applicable. The
interface identified by a particular value of this
index is the same interface as identified by the
same value of ifIndex."
::= { rsIpAddrEntry 2 }
rsIpAdEntNetMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The subnet mask associated with the IP address of
this entry. The value of the mask is an IP
address with all the network bits set to 1 and all
the hosts bits set to 0."
::= { rsIpAddrEntry 3 }
rsIpAdEntForwardIpBroadcast OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" This variable controls forwarding of IP (sub)net-directed
broadcasts destined for an attached sub(net). "
DEFVAL { enable }
::= { rsIpAddrEntry 4 }
rsIpAdEntBackupAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"In case there are two IP routers in the domain,
the address of the second IP router."
::= { rsIpAddrEntry 5 }
rsIpAdEntStatus OBJECT-TYPE
SYNTAX INTEGER{
valid(1),
invalid(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The validity of this entry. Invalid indicates that this entry is
invalid in IpAddrTable (MIB II)."
DEFVAL { valid }
::= { rsIpAddrEntry 6 }
rsIpAdEntBcastAddr OBJECT-TYPE
SYNTAX INTEGER (0..1)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Indicates how the host part of ip subnet broadcast messages will be
filled:
0 - host part will be filled by 0
1 - host part will be filled by 1."
::= { rsIpAddrEntry 7 }
rsIpAdEntArpServer OBJECT-TYPE
SYNTAX INTEGER{
enable(1),
disable(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates whether the router will reply to incoming ARP requests on
this interface, providing the physical address corresponding to this
IP interface."
DEFVAL { disable }
::= { rsIpAddrEntry 8 }
rsIpAdEntName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..30))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The IP Interface name"
::= { rsIpAddrEntry 9 }
rsIpAdEntOwner OBJECT-TYPE
SYNTAX INTEGER{
static(1),
dhcp(2),
internal(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The IP Interface owner. Static if interface defined by user, dhcp
if received by boot protocol like DHCP and internal
for internal usage."
DEFVAL { static }
::= { rsIpAddrEntry 10 }
rsIpAdEntAdminStatus OBJECT-TYPE
SYNTAX INTEGER{
up(1),
down(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The IP Interface admin status."
DEFVAL { up }
::= { rsIpAddrEntry 11 }
rsIpAdEntOperStatus OBJECT-TYPE
SYNTAX INTEGER {
active(1),
inactive(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"If active the interface can be used to send and receive frames."
::= { rsIpAddrEntry 12 }
icmpSpec OBJECT IDENTIFIER ::= { ipSpec 2 }
rsIcmpGenErrMsgEnable OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable controlls the ability to generate ICMP error messages"
DEFVAL { enable }
::= { icmpSpec 1 }
rsIcmpRdTable OBJECT-TYPE
SYNTAX SEQUENCE OF RsIcmpRdEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains ICMP Router Discovery parameters
configurated per IP interface."
::= {icmpSpec 2}
rsIcmpRdEntry OBJECT-TYPE
SYNTAX RsIcmpRdEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The ICMP parameters configurated for IP interface."
INDEX {rsIcmpRdIpAddr}
::= {rsIcmpRdTable 1}
RsIcmpRdEntry ::= SEQUENCE {
rsIcmpRdIpAddr IpAddress,
rsIcmpRdIpAdvertAddr IpAddress,
rsIcmpRdMaxAdvertInterval INTEGER,
rsIcmpRdMinAdvertInterval INTEGER,
rsIcmpRdAdvertLifetime INTEGER,
rsIcmpRdAdvertise INTEGER,
rsIcmpRdPreferenceLevel INTEGER,
rsIcmpRdEntStatus INTEGER
}
rsIcmpRdIpAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IP address to which this entry's information pertains."
::= {rsIcmpRdEntry 1}
rsIcmpRdIpAdvertAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The IP destination address to be used for multicast
Router Advertisements sent from the interface. The
only permissible values are the all-systems multicast
address, 224.0.0.1, or the limited-broadcast address,
255.255.255.255."
DEFVAL {'E0000001'H}
::= {rsIcmpRdEntry 2}
rsIcmpRdMaxAdvertInterval OBJECT-TYPE
SYNTAX INTEGER (4..1800)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The maximum time allowed between sending multicast
Router Advertisements from the interface, in seconds.
Must be no less than 4 seconds and no greater than 1800
seconds."
DEFVAL {600}
::= {rsIcmpRdEntry 3}
rsIcmpRdMinAdvertInterval OBJECT-TYPE
SYNTAX INTEGER (3..1800)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The minimum time allowed between sending unsolicited
multicast Router Advertisements from the interface, in
seconds. Must be no less than 3 seconds and no greater
than rsIcmpRdMaxAdvertInterval.
Default: 0.75 * rsIcmpRdMaxAdvertInterval."
::= {rsIcmpRdEntry 4}
rsIcmpRdAdvertLifetime OBJECT-TYPE
SYNTAX INTEGER (4..9000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The maximum length of time that the advertised addresses
are to be considered as valid. Must be no less than
rsIcmpRdMaxAdvertInterval and no greater than 9000 seconds.
Default: 3 * rsIcmpRdMaxAdvertInterval."
::= {rsIcmpRdEntry 5}
rsIcmpRdAdvertise OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A flag indicating whether or not the address is to be
advertised."
DEFVAL {enable}
::= {rsIcmpRdEntry 6}
rsIcmpRdPreferenceLevel OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The preferability of the address as a default router
address, relative to other router addresses on the same
subnet."
DEFVAL {0}
::= {rsIcmpRdEntry 7}
rsIcmpRdEntStatus OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting of any value to this object set values of
all fields to the default values."
::= {rsIcmpRdEntry 8}
rip2Spec OBJECT IDENTIFIER ::= { ipSpec 3 }
rsRip2IfConfTable OBJECT-TYPE
SYNTAX SEQUENCE OF RsRip2IfConfEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table is extension of rip2IfConfTable (RFC 1389 ,RIP 2)"
::= { rip2Spec 1 }
rsRip2IfConfEntry OBJECT-TYPE
SYNTAX RsRip2IfConfEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The row definition for this table."
INDEX { rsRip2IfConfAddress }
::= { rsRip2IfConfTable 1 }
RsRip2IfConfEntry ::= SEQUENCE {
rsRip2IfConfAddress IpAddress,
rsRip2IfConfVirtualDis INTEGER,
rsRip2IfConfAutoSend INTEGER,
rlRip2IfConfKeyChain DisplayString
}
rsRip2IfConfAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The IP Address of this system on the indicated subnet. "
::= { rsRip2IfConfEntry 1 }
rsRip2IfConfVirtualDis OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable defines the virtual number of hops assigned to
the interface specified by rsIfIpAddrIndex. This enables
fine-tuning of the RIP routing algorithm."
DEFVAL { 1 }
::= { rsRip2IfConfEntry 2 }
rsRip2IfConfAutoSend OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable controls RIP automatic send behavior. If enabled
and no routers were heard on the interface, RIP will only send
default route with high metric. Otherwise RIP will send updates
according to configuration. "
DEFVAL {enable}
::= { rsRip2IfConfEntry 3 }
rlRip2IfConfKeyChain OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Name of the key-chain which rip2
interface uses for md5 authentication"
::= { rsRip2IfConfEntry 4 }
rlRip2AutoInterfaceCreation OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable controls RIP automatic creation and activation of
interfaces. If value is enable - IP interface creation results in
creation and activation of rip Interface. If value is disable
Rip interface is created but not activated.
The option is a platform parameter."
::= { rip2Spec 2 }
rlRip2MibVersion OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"MIB's version, the current version is 1."
::= { rip2Spec 3 }
arpSpec OBJECT IDENTIFIER ::= { ipSpec 4 }
rsArpDeleteTable OBJECT-TYPE
SYNTAX INTEGER {
noAction(0), -- for get only
deleteArpTab(1),
deleteIpArpDynamicEntries(2),
deleteIpArpStaticEntries(3),
deleteIpArpDelDynamicRefreshStatic(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
-- old description
-- "Setting this object to any not-null value has the effect of deleting
-- all entries of the ARP table."
-- new description
"Setting to value deleteArpTab(1): deletes the arp table -
static and dynamic entries
deleteIpArpDynamicEntries(2): delete all dynamic entries
deleteIpArpStaticEntries(3): delete all static entries
deleteIpArpDelDynamicRefreshStatic(4) - delete all dynamic -
refresh static, thus
refrashing FFT.
on get returns the last action"
::= { arpSpec 1 }
-- range 1 to 40,000,000 to allow system convesion to timer
rsArpInactiveTimeOut OBJECT-TYPE
SYNTAX Unsigned-32 (1..40000000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable defines the maximum time period (in second) that can
pass between ARP requests concerning an entry in the ARP table.
After this time period, the entry is deleted from the table."
DEFVAL { 60000 }
::= { arpSpec 2 }
rsArpProxy OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"When ARP Proxy is enabled, the router can respond to
ARP requests for nodes located on a different sub-net,
provided they are it its network table. The router responds
with its own MAC address.
When ARP Proxy is disabled, the router responds only
to ARP requests for its own IP addresses."
DEFVAL { disable }
::= { arpSpec 3 }
rsArpRequestsSent OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Displays how many ARP requests have been sent out to an ARP server
for address resolution."
::= { arpSpec 4 }
rsArpRepliesSent OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Displays how many ARP replies have been sent out to an ARP client
in response to request packets."
::= { arpSpec 5 }
rsArpProxyRepliesSent OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Displays how many proxy ARP replies have been sent out in response
to request packets. A proxy router serving as a gateway to a subnet
would respond with a proxy reply."
::= { arpSpec 6 }
rsArpUnresolveTimer OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the frequency in seconds in which to send out ARP
requests to resolve the Next Hop MAC address."
::= { arpSpec 7 }
rsArpMibVersion OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"MIB's version, the current version is 2.
Version 1:
rsArpDeleteTable
Setting this object to any not-null value has the effect
of deleting all entries of the ARP table.
Version 2:
rsArpDeleteTable
Setting to value deleteArpTab(1): deletes the arp table -
static and dynamic entries
deleteIpArpDynamicEntries(2): delete all dynamic entries
deleteIpArpStaticEntries(3): delete all static entries
deleteIpArpDelDynamicRefreshStatic(4):
delete all dynamic -
refresh static, thus
refrashing FFT.
on get returns the last action.
New MIB variables support:
rsArpRequestsSent
rsArpRepliesSent
rsArpProxyRepliesSent
rsArpUnresolveTimer
rsArpMibVersion"
::= { arpSpec 8 }
tftp OBJECT IDENTIFIER ::= { ipSpec 5 }
rsTftpRetryTimeOut OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
" General Retransmission time-out value (seconds) "
DEFVAL { 15 }
::= { tftp 1 }
rsTftpTotalTimeOut OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Total Retransmission time-out value (seconds) "
DEFVAL { 60 }
::= { tftp 2 }
rsSendConfigFile OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The file name include path where the Router Server will put the full
configuration. The default destination address will be the sender
address."
::= { tftp 3 }
rsGetConfigFile OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The file name include path where the Router Server will get the full
configuration from. The default destination address will be the sender
address."
::= { tftp 4 }
rsLoadSoftware OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The file name include path where the Router Server will get the
software. The default source address will be the sender address."
::= { tftp 5 }
rsFileServerAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The IP address of the configuration / sw server."
::= { tftp 6 }
rsSoftwareDeviceName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..8))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The Software Device Name specifies a device name, using this Software"
::= { tftp 7 }
rsSoftwareFileAction OBJECT-TYPE
SYNTAX INTEGER {
download(1),
upload (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Holds the current action done on the software file "
DEFVAL {download }
::= {tftp 8 }
ipRedundancy OBJECT IDENTIFIER ::= { ipSpec 6 }
ipRedundAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This parameter controls the IP Redundancy in the device.
In case the parameter is Enable and the other router
becomes inoperational, all the traffic is handled by
this element."
DEFVAL {disable }
::= { ipRedundancy 1 }
ipRedundOperStatus OBJECT-TYPE
SYNTAX INTEGER {
active(1),
inactive(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" obsolete "
DEFVAL {inactive}
::= { ipRedundancy 2 }
ipRedundRoutersTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpRedundRoutersEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"List of IP addresses backed up by this router."
::= {ipRedundancy 3 }
ipRedundRoutersEntry OBJECT-TYPE
SYNTAX IpRedundRoutersEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" The row definition for this table."
INDEX {ipRedundRoutersIfAddr, ipRedundRoutersMainRouterAddr}
::= {ipRedundRoutersTable 1 }
IpRedundRoutersEntry ::= SEQUENCE {
ipRedundRoutersIfAddr IpAddress,
ipRedundRoutersMainRouterAddr IpAddress,
ipRedundRoutersOperStatus INTEGER,
ipRedundRoutersPollInterval INTEGER,
ipRedundRoutersTimeout INTEGER,
ipRedundRoutersStatus INTEGER
}
ipRedundRoutersIfAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Ip address of the IP interface on which the redundancy feature
is operational."
::= { ipRedundRoutersEntry 1}
ipRedundRoutersMainRouterAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Ip address of the polled main router."
::= { ipRedundRoutersEntry 2}
ipRedundRoutersOperStatus OBJECT-TYPE
SYNTAX INTEGER { active(1), inactive(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"If active, the main router is considered inoperational and the IP
interface operates as its backup."
::= { ipRedundRoutersEntry 3 }
ipRedundRoutersPollInterval OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Polling interval for this router (in seconds). If 0 the router is not
polled."
DEFVAL { 3 }
::= { ipRedundRoutersEntry 4 }
ipRedundRoutersTimeout OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Interval in seconds during which the backed-up router must signal.
If it does not signal, it is considered inoperational and the IP
interface starts operating as backup."
DEFVAL { 12 }
::= { ipRedundRoutersEntry 5}
ipRedundRoutersStatus OBJECT-TYPE
SYNTAX INTEGER {
active(1),
notInService(2),
notReady(3),
createAndGo(4),
createAndWait(5),
destroy(6)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Entry status"
::= { ipRedundRoutersEntry 6}
ipRouteLeaking OBJECT IDENTIFIER ::= { ipSpec 7 }
ipLeakStaticToRip OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This parameter controls leaking (redistribution) of static routes
to RIP. When enabled, all routes inserted to the IP routing table
via SNMP are advertised into RIP."
DEFVAL {enable}
::= { ipRouteLeaking 1 }
ipLeakStaticToOspf OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This parameter controls leaking (redistribution) of static routes
into OSPF. When enabled, all routes inserted to the IP routing table
via SNMP are advertised into OSPF as external routes."
DEFVAL {enable}
::= { ipRouteLeaking 2 }
ipLeakOspfToRip OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This parameter controls leaking (redistribution) of routes
from OSPF to RIP. If enabled, all routes learned via OSPF
are advertised into RIP."
DEFVAL {disable}
::= { ipRouteLeaking 3 }
ipLeakRipToOspf OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This parameter controls leaking (redistribution) of routes
from RIP to OSPF. If enabled, all routes learned via RIP
are advertised into OSPF as external routes."
DEFVAL {disable}
::= { ipRouteLeaking 4 }
ipLeakExtDirectToOspf OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This parameter controls leaking (redistribution) into OSPF of
direct routes external to OSPF, i.e. routes to local network
corresponding to IP interfaces on which OSPF is disabled.
When enabled, all such direct routes are advertised into OSPF
as external routes."
DEFVAL {enable}
::= { ipRouteLeaking 5 }
ipRipFilter OBJECT IDENTIFIER ::= { ipSpec 8 }
-- Global RIP filter is defined per IP router.
rsIpRipFilterGlbTable OBJECT-TYPE
SYNTAX SEQUENCE OF RsIpRipFilterGlbEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The table of RIP global filters per IP router."
::= { ipRipFilter 1 }
rsIpRipFilterGlbEntry OBJECT-TYPE
SYNTAX RsIpRipFilterGlbEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" An entry in the RIP global filter table "
INDEX { rsIpRipFilterGlbType,
rsIpRipFilterGlbNumber }
::= { rsIpRipFilterGlbTable 1 }
RsIpRipFilterGlbEntry ::= SEQUENCE {
rsIpRipFilterGlbType INTEGER,
rsIpRipFilterGlbNumber INTEGER,
rsIpRipFilterGlbStatus INTEGER,
rsIpRipFilterGlbIpAddr IpAddress,
rsIpRipFilterGlbNetworkMaskBits INTEGER,
rsIpRipFilterGlbMatchBits INTEGER,
rsIpRipFilterGlbAction INTEGER
}
rsIpRipFilterGlbType OBJECT-TYPE
SYNTAX INTEGER {
input(1),
output(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Type of filter - input/output "
::= {rsIpRipFilterGlbEntry 1}
rsIpRipFilterGlbNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of RIP filter. "
::= {rsIpRipFilterGlbEntry 2}
rsIpRipFilterGlbStatus OBJECT-TYPE
SYNTAX INTEGER {
valid (1),
invalid (2),
underCreation (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The validity of this entry. Setting this value to invalid deletes
the entry, and the entry may be actualy removed from the table."
DEFVAL { valid }
::= {rsIpRipFilterGlbEntry 3}
rsIpRipFilterGlbIpAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
" network prefix IP address, as in the forwarding table. "
DEFVAL {'00000000'H}
::= {rsIpRipFilterGlbEntry 4}
rsIpRipFilterGlbNetworkMaskBits OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
" the number of bits in the IP Network mask, called network-prefix-length
in Router Requirements terminology. for example: the value 16 means
mask 255.255.0.0 "
DEFVAL {0}
::= {rsIpRipFilterGlbEntry 5}
rsIpRipFilterGlbMatchBits OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
" the number of bits to match in the Network IP address. A value
smaller than 32 defines a wildcard. for example: the value 8 means
all routes whose leftmost 8 bits are equal to those of the network IP
address. If this variable has a value other than 32, than
rsIpRipFilterGlbNetworkMaskBits must be 0 and is ignored. "
DEFVAL {32}
::= {rsIpRipFilterGlbEntry 6}
rsIpRipFilterGlbAction OBJECT-TYPE
SYNTAX INTEGER {
deny(1),
permit(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Filter action - permit/deny for this network"
DEFVAL { permit }
::= {rsIpRipFilterGlbEntry 7}
-- Intf RIP filter is defined per IP Interface
rsIpRipFilterLclTable OBJECT-TYPE
SYNTAX SEQUENCE OF RsIpRipFilterLclEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of input/output RIP filters used per IP Interface."
::= { ipRipFilter 2 }
rsIpRipFilterLclEntry OBJECT-TYPE
SYNTAX RsIpRipFilterLclEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" An entry in the Intf RIP filter table"
INDEX {rsIpRipFilterLclIpIntf,
rsIpRipFilterLclType,
rsIpRipFilterLclNumber}
::= { rsIpRipFilterLclTable 1 }
RsIpRipFilterLclEntry ::= SEQUENCE {
rsIpRipFilterLclIpIntf IpAddress,
rsIpRipFilterLclType INTEGER,
rsIpRipFilterLclNumber INTEGER,
rsIpRipFilterLclStatus INTEGER,
rsIpRipFilterLclIpAddr IpAddress,
rsIpRipFilterLclNetworkMaskBits INTEGER,
rsIpRipFilterLclMatchBits INTEGER,
rsIpRipFilterLclAction INTEGER
}
rsIpRipFilterLclIpIntf OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The IP address identifying the RIP interface for this filter.
This value corresponds to rsIpAdEntAddr. "
::= {rsIpRipFilterLclEntry 1}
rsIpRipFilterLclType OBJECT-TYPE
SYNTAX INTEGER {
input(1),
output(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Type of filter - input/output "
::= {rsIpRipFilterLclEntry 2}
rsIpRipFilterLclNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of RIP filter for this Interface"
::= {rsIpRipFilterLclEntry 3}
rsIpRipFilterLclStatus OBJECT-TYPE
SYNTAX INTEGER {
valid (1),
invalid (2),
underCreation (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The validity of this entry. Setting this value to invalid deletes
the entry, and the entry may be actualy removed from the table."
DEFVAL { valid }
::= {rsIpRipFilterLclEntry 4}
rsIpRipFilterLclIpAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
" network prefix IP address, as in the forwarding table. "
DEFVAL {'00000000'H}
::= {rsIpRipFilterLclEntry 5}
rsIpRipFilterLclNetworkMaskBits OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
" the number of bits in the IP Network mask, called network-prefix-length
in Router Requirements terminology. for example: the value 16 means
mask 255.255.0.0 "
DEFVAL {0}
::= {rsIpRipFilterLclEntry 6}
rsIpRipFilterLclMatchBits OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
" the number of bits to match in the Network IP address. A value
smaller than 32 defines a wildcard. for example: the value 8 means
all routes whose leftmost 8 bits are equal to those of the network IP
address. If this variable has a value other than 32, than
rsIpRipFilterLclNetworkMaskBits must be 0 and is ignored. "
DEFVAL {32}
::= {rsIpRipFilterLclEntry 7}
rsIpRipFilterLclAction OBJECT-TYPE
SYNTAX INTEGER {
deny(1),
permit(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Filter action - permit/deny "
DEFVAL { permit }
::= {rsIpRipFilterLclEntry 8}
rsRipEnable OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enables or disables RIP."
::= { ipSpec 9 }
rsTelnetPassword OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { ipSpec 11 }
rlTranslationNameToIpTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlTranslationNameToIpEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table translates IP interfaces's name to
IP interface's address"
::= { ipSpec 12 }
rlTranslationNameToIpEntry OBJECT-TYPE
SYNTAX RlTranslationNameToIpEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The row definition for this table."
INDEX { IMPLIED rlTranslationNameToIpName }
::= { rlTranslationNameToIpTable 1 }
RlTranslationNameToIpEntry ::= SEQUENCE {
rlTranslationNameToIpName DisplayString,
rlTranslationNameToIpIpAddr IpAddress
}
rlTranslationNameToIpName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..30))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IP Interface name"
::= { rlTranslationNameToIpEntry 1 }
rlTranslationNameToIpIpAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IP Interface address"
::= { rlTranslationNameToIpEntry 2 }
-- Mib for Preferance among routing protocols:
-- Range value 0..255 . O is most preferred, 255 never used for forwarding.
-- only exception is direct which range 0..254 we prevent direct from becoming unreachable
-- (according to RFC1812 section 5.2.4)
rlIpRoutingProtPreference OBJECT IDENTIFIER ::= { ipSpec 13 }
rlIpRoutingProtPreferenceDirect OBJECT-TYPE
SYNTAX INTEGER (0..254)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The Preference given to routes whose origin is Local
IP (i.e. IP interface in IpAddrTable)
It is proposed that the value will be higher than dynamic routing protocols.
The change of its value may lead to unexpected results, such as routing loops"
DEFVAL { 20 }
::= {rlIpRoutingProtPreference 1}
rlIpRoutingProtPreferenceStatic OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The Preference given to routes whose origin is Men configured by
Net managment tools, i.e. Command line or SNMP configured."
DEFVAL { 10 }
::= {rlIpRoutingProtPreference 2}
-- For OSPF:
rlIpRoutingProtPreferenceOspfInter OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The Preference given to routes whose origin is internal
ospf Links.
Relate to routes which are based on
OSPF Link State Advertisements of type 1-4"
DEFVAL { 30 }
::= {rlIpRoutingProtPreference 3}
rlIpRoutingProtPreferenceOspfExt OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The Preference given to routes whose origin is external to OSPF
i.e. routes imported by as OSPF AS Border router.
Relate to routes which are based on
OSPF Link State Advertisements of types 5 and 7"
DEFVAL { 60 }
::= {rlIpRoutingProtPreference 4}
rlIpRoutingProtPreferenceOspfReject OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The Preference given to routes whose origin is OSPF
and Are inserted to cover gaps in net range"
DEFVAL { 254 }
::= {rlIpRoutingProtPreference 5}
--For Rip
rlIpRoutingProtPreferenceRipNormal OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The Preference given to routes whose origin is RIP
routing domain"
DEFVAL { 60 }
::= {rlIpRoutingProtPreference 6}
rlIpRoutingProtPreferenceRipAggregate OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The Preference given to routes whose origin is aggregation
As a method of rip1 to handle the CIDR schema.
The idea is that ripv1 aggregates route which fall into certion
class of IP. This route is a discard route in effect,
and is referenced, at forwarding route look up, if there is no beter
match. (which means the route is not available)"
DEFVAL { 254 }
::= {rlIpRoutingProtPreference 7}
rlIpRoutingProtPreferenceBgp OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The Preference given to routes whose origin is
BGP ROUTERS (EBGP or IBGP)"
DEFVAL { 80 }
::= {rlIpRoutingProtPreference 8}
-- We may use it in the future to control
-- the time scalars new values take effect
-- rlRoutePrefChangeTakeEffectAT OBJECT-TYPE
-- SYNTAX INTEGER {
-- afterReset (1),
-- immediate (2)
-- }
-- ACCESS read-write
-- STATUS mandatory
-- DESCRIPTION
-- "The time the changes to preference of protocols will become in effect.
-- options are:
-- 1. At run time.
-- 2. after rebboting the devise
-- default value 2 to avoid masive routing change at run time
-- "
-- DEFVAL { afterReset }
-- ::= {rlIpRoutingProtPreference 9}
rlOspf OBJECT IDENTIFIER ::= { ipSpec 14 }
rlOspfMibVersion OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"MIB's version, the current version is 1."
::= { rlOspf 1 }
rlOspfAutoInterfaceCreation OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable controls OSPF automatic creation and activation of
interfaces. If value is enable - IP interface creation results in
creation and activation of OSPF Interface. If value is disable
OSPF interface is created but not activated.
The option is a platform parameter."
::= { rlOspf 2 }
--Extention to ospfIfTable
rlOspfIfExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlOspfIfExtEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The OSPF Interface Table describes the
interfaces from the viewpoint of OSPF."
::= { rlOspf 3 }
rlOspfIfExtEntry OBJECT-TYPE
SYNTAX RlOspfIfExtEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The OSPF interface table extension
for md5 authentication"
AUGMENTS { ospfIfEntry }
::= { rlOspfIfExtTable 1 }
RlOspfIfExtEntry ::= SEQUENCE {
rlOspfifKeyChain DisplayString
}
rlOspfifKeyChain OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Name of the key-chain which ospf
interface uses for md5 authentication"
::= { rlOspfIfExtEntry 1 }
-- OSPF Link State Advertisements
-- OSPF Router LSA
rlOspfRtrLnkTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlOspfRtrLnkEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Router Link State Advertisement."
::= { rlOspf 4 }
rlOspfRtrLnkEntry OBJECT-TYPE
SYNTAX RlOspfRtrLnkEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry from Router LSA."
INDEX { rlOspfRtrLnkAreaId, rlOspfRtrLnkLsid,
rlOspfRtrLnkRouterId, rlOspfRtrLnkIdx }
::= { rlOspfRtrLnkTable 1 }
RlOspfRtrLnkEntry ::=
SEQUENCE {
rlOspfRtrLnkAreaId
AreaID,
rlOspfRtrLnkLsid
IpAddress,
rlOspfRtrLnkRouterId
RouterID,
rlOspfRtrLnkIdx
Unsigned-32,
rlOspfRtrLnkSequence
Integer-32,
rlOspfRtrLnkAge
Integer-32,
rlOspfRtrLnkChecksum
Integer-32,
rlOspfRtrLnkLength
Unsigned-32,
rlOspfRtrLnkBitV
INTEGER,
rlOspfRtrLnkBitE
INTEGER,
rlOspfRtrLnkBitB
INTEGER,
rlOspfRtrLnkLinks
Unsigned-32,
rlOspfRtrLnkLinkID
IpAddress,
rlOspfRtrLnkLinkData
IpAddress,
rlOspfRtrLnkType
INTEGER,
rlOspfRtrLnkMetric
Unsigned-32
}
rlOspfRtrLnkAreaId OBJECT-TYPE
SYNTAX AreaID
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The 32 bit identifier of the Area from which
the LSA was received."
REFERENCE
"OSPF Version 2, Appendix C.2 Area parameters"
::= { rlOspfRtrLnkEntry 1 }
rlOspfRtrLnkLsid OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Link State ID is an LS Type Specific field
containing either a Router ID or an IP Address;
it identifies the piece of the routing domain
that is being described by the advertisement."
REFERENCE
"OSPF Version 2, Section 12.1.4 Link State ID"
::= { rlOspfRtrLnkEntry 2 }
rlOspfRtrLnkRouterId OBJECT-TYPE
SYNTAX RouterID
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The 32 bit number that uniquely identifies the
originating router in the Autonomous System."
REFERENCE
"OSPF Version 2, Appendix C.1 Global parameters"
::= { rlOspfRtrLnkEntry 3 }
rlOspfRtrLnkIdx OBJECT-TYPE
SYNTAX Unsigned-32 (1.. 65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index is a unsigned 32-bit integer.
It is used as sequence number of entry
in the LSA and relevant only for Router
or Network LSA which can contain
unlimited number of entries."
::= { rlOspfRtrLnkEntry 4 }
rlOspfRtrLnkSequence OBJECT-TYPE
SYNTAX Integer-32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The sequence number field is a signed 32-bit
integer. It is used to detect old and duplicate
link state advertisements. The space of sequence
numbers is linearly ordered. The larger the
sequence number the more recent the advertisement."
REFERENCE
"OSPF Version 2, Section 12.1.6 LS sequence number"
::= { rlOspfRtrLnkEntry 5 }
rlOspfRtrLnkAge OBJECT-TYPE
SYNTAX Integer-32 -- Should be 0..MaxAge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This field is the age of the link state
advertisement in seconds."
REFERENCE
"OSPF Version 2, Section 12.1.1 LS age"
::= { rlOspfRtrLnkEntry 6 }
rlOspfRtrLnkChecksum OBJECT-TYPE
SYNTAX Integer-32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This field is the checksum of the complete contents
of the advertisement, excepting the age field.
The age field is excepted so that an advertisement's
age can be incremented without updating the checksum.
The checksum used is the same that is used for ISO
connectionless datagrams; it is commonly referred
to as the Fletcher checksum."
REFERENCE
"OSPF Version 2, Section 12.1.7 LS checksum"
::= { rlOspfRtrLnkEntry 7 }
rlOspfRtrLnkLength OBJECT-TYPE
SYNTAX Unsigned-32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The lenth in bytes of the LSA.
This includes the 20 byte LSA header."
::= { rlOspfRtrLnkEntry 8 }
rlOspfRtrLnkBitV OBJECT-TYPE
SYNTAX INTEGER {
off(1),
on(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"When set, the router is an endpoint
of one or more fully adjacent virtual
links having the described area as Transit
area (V is for virtual link endpoint)."
::= { rlOspfRtrLnkEntry 9 }
rlOspfRtrLnkBitE OBJECT-TYPE
SYNTAX INTEGER {
off(1),
on(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"When set, the router is an AS
boundary router (E is for external)."
::= { rlOspfRtrLnkEntry 10 }
rlOspfRtrLnkBitB OBJECT-TYPE
SYNTAX INTEGER {
off(1),
on(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"When set, the router is an area
border router (B is for border)."
::= { rlOspfRtrLnkEntry 11 }
rlOspfRtrLnkLinks OBJECT-TYPE
SYNTAX Unsigned-32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of router links described in this LSA.
This must be the total collection of router links
(i.e., interfaces) to the area."
::= { rlOspfRtrLnkEntry 12 }
rlOspfRtrLnkLinkID OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Identifies the object that this router link
connects to. Value depends on the link's Type."
::= { rlOspfRtrLnkEntry 13 }
rlOspfRtrLnkLinkData OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Value depends on the link's Type field."
::= { rlOspfRtrLnkEntry 14 }
rlOspfRtrLnkType OBJECT-TYPE
SYNTAX INTEGER {
pointToPoint(1),
transitNetwork(2),
stubNetwork(3),
virtualLink(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A quick description of the router link."
::= { rlOspfRtrLnkEntry 15 }
rlOspfRtrLnkMetric OBJECT-TYPE
SYNTAX Unsigned-32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The cost of using this router link."
::= { rlOspfRtrLnkEntry 16 }
-- OSPF Network LSA
rlOspfNetLnkTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlOspfNetLnkEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Network Link State Advertisement."
::= { rlOspf 5 }
rlOspfNetLnkEntry OBJECT-TYPE
SYNTAX RlOspfNetLnkEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry from Network LSA."
INDEX { rlOspfNetLnkAreaId, rlOspfNetLnkLsid,
rlOspfNetLnkRouterId, rlOspfNetLnkIdx }
::= { rlOspfNetLnkTable 1 }
RlOspfNetLnkEntry ::=
SEQUENCE {
rlOspfNetLnkAreaId
AreaID,
rlOspfNetLnkLsid
IpAddress,
rlOspfNetLnkRouterId
RouterID,
rlOspfNetLnkIdx
Unsigned-32,
rlOspfNetLnkSequence
Integer-32,
rlOspfNetLnkAge
Integer-32,
rlOspfNetLnkChecksum
Integer-32,
rlOspfNetLnkLength
Unsigned-32,
rlOspfNetLnkMask
IpAddress,
rlOspfNetLnkAttRouter
IpAddress
}
rlOspfNetLnkAreaId OBJECT-TYPE
SYNTAX AreaID
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The 32 bit identifier of the Area from which
the LSA was received."
REFERENCE
"OSPF Version 2, Appendix C.2 Area parameters"
::= { rlOspfNetLnkEntry 1 }
rlOspfNetLnkLsid OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Link State ID is an LS Type Specific field
containing either a Router ID or an IP Address;
it identifies the piece of the routing domain
that is being described by the advertisement."
REFERENCE
"OSPF Version 2, Section 12.1.4 Link State ID"
::= { rlOspfNetLnkEntry 2 }
rlOspfNetLnkRouterId OBJECT-TYPE
SYNTAX RouterID
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The 32 bit number that uniquely identifies the
originating router in the Autonomous System."
REFERENCE
"OSPF Version 2, Appendix C.1 Global parameters"
::= { rlOspfNetLnkEntry 3 }
rlOspfNetLnkIdx OBJECT-TYPE
SYNTAX Unsigned-32 (1.. 65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index is a unsigned 32-bit integer.
It is used as sequence number of entry
in the LSA and relevant only for Router
or Network LSA which can contain
unlimited number of entries."
::= { rlOspfNetLnkEntry 4 }
rlOspfNetLnkSequence OBJECT-TYPE
SYNTAX Integer-32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The sequence number field is a signed 32-bit
integer. It is used to detect old and duplicate
link state advertisements. The space of sequence
numbers is linearly ordered. The larger the
sequence number the more recent the advertisement."
REFERENCE
"OSPF Version 2, Section 12.1.6 LS sequence number"
::= { rlOspfNetLnkEntry 5 }
rlOspfNetLnkAge OBJECT-TYPE
SYNTAX Integer-32 -- Should be 0..MaxAge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This field is the age of the link state
advertisement in seconds."
REFERENCE
"OSPF Version 2, Section 12.1.1 LS age"
::= { rlOspfNetLnkEntry 6 }
rlOspfNetLnkChecksum OBJECT-TYPE
SYNTAX Integer-32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This field is the checksum of the complete contents
of the advertisement, excepting the age field.
The age field is excepted so that an advertisement's
age can be incremented without updating the checksum.
The checksum used is the same that is used for ISO
connectionless datagrams; it is commonly referred
to as the Fletcher checksum."
REFERENCE
"OSPF Version 2, Section 12.1.7 LS checksum"
::= { rlOspfNetLnkEntry 7 }
rlOspfNetLnkLength OBJECT-TYPE
SYNTAX Unsigned-32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The lenth in bytes of the LSA.
This includes the 20 byte LSA header."
::= { rlOspfNetLnkEntry 8 }
rlOspfNetLnkMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IP address mask for the network."
::= { rlOspfNetLnkEntry 9 }
rlOspfNetLnkAttRouter OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Router IDs of each of the routers
attached to the network."
::= { rlOspfNetLnkEntry 10 }
-- OSPF Summary LSA (Type 3)
rlOspfSumLnkTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlOspfSumLnkEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Summary Link State Advertisement
for network (Type 3)."
::= { rlOspf 6 }
rlOspfSumLnkEntry OBJECT-TYPE
SYNTAX RlOspfSumLnkEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry from Summary LSA."
INDEX { rlOspfSumLnkAreaId, rlOspfSumLnkLsid,
rlOspfSumLnkRouterId}
::= { rlOspfSumLnkTable 1 }
RlOspfSumLnkEntry ::=
SEQUENCE {
rlOspfSumLnkAreaId
AreaID,
rlOspfSumLnkLsid
IpAddress,
rlOspfSumLnkRouterId
RouterID,
rlOspfSumLnkSequence
Integer-32,
rlOspfSumLnkAge
Integer-32,
rlOspfSumLnkChecksum
Integer-32,
rlOspfSumLnkLength
Unsigned-32,
rlOspfSumLnkMask
IpAddress,
rlOspfSumLnkMetric
Unsigned-32
}
rlOspfSumLnkAreaId OBJECT-TYPE
SYNTAX AreaID
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The 32 bit identifier of the Area from which
the LSA was received."
REFERENCE
"OSPF Version 2, Appendix C.2 Area parameters"
::= { rlOspfSumLnkEntry 1 }
rlOspfSumLnkLsid OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Link State ID is an LS Type Specific field
containing either a Router ID or an IP Address;
it identifies the piece of the routing domain
that is being described by the advertisement."
REFERENCE
"OSPF Version 2, Section 12.1.4 Link State ID"
::= { rlOspfSumLnkEntry 2 }
rlOspfSumLnkRouterId OBJECT-TYPE
SYNTAX RouterID
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The 32 bit number that uniquely identifies the
originating router in the Autonomous System."
REFERENCE
"OSPF Version 2, Appendix C.1 Global parameters"
::= { rlOspfSumLnkEntry 3 }
rlOspfSumLnkSequence OBJECT-TYPE
SYNTAX Integer-32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The sequence number field is a signed 32-bit
integer. It is used to detect old and duplicate
link state advertisements. The space of sequence
numbers is linearly ordered. The larger the
sequence number the more recent the advertisement."
REFERENCE
"OSPF Version 2, Section 12.1.6 LS sequence number"
::= { rlOspfSumLnkEntry 4 }
rlOspfSumLnkAge OBJECT-TYPE
SYNTAX Integer-32 -- Should be 0..MaxAge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This field is the age of the link state
advertisement in seconds."
REFERENCE
"OSPF Version 2, Section 12.1.1 LS age"
::= { rlOspfSumLnkEntry 5 }
rlOspfSumLnkChecksum OBJECT-TYPE
SYNTAX Integer-32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This field is the checksum of the complete contents
of the advertisement, excepting the age field.
The age field is excepted so that an advertisement's
age can be incremented without updating the checksum.
The checksum used is the same that is used for ISO
connectionless datagrams; it is commonly referred
to as the Fletcher checksum."
REFERENCE
"OSPF Version 2, Section 12.1.7 LS checksum"
::= { rlOspfSumLnkEntry 6 }
rlOspfSumLnkLength OBJECT-TYPE
SYNTAX Unsigned-32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The lenth in bytes of the LSA.
This includes the 20 byte LSA header."
::= { rlOspfSumLnkEntry 7 }
rlOspfSumLnkMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Value depends on the link's Type field."
::= { rlOspfSumLnkEntry 8 }
rlOspfSumLnkMetric OBJECT-TYPE
SYNTAX Unsigned-32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The cost of using this router link."
::= { rlOspfSumLnkEntry 9 }
-- OSPF Summary LSA (Type 4)
rlOspfAsbLnkTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlOspfAsbLnkEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Summary Link State Advertisement
for ASBR (Type 4)."
::= { rlOspf 7 }
rlOspfAsbLnkEntry OBJECT-TYPE
SYNTAX RlOspfAsbLnkEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry from Summary LSA."
INDEX { rlOspfAsbLnkAreaId, rlOspfAsbLnkLsid,
rlOspfAsbLnkRouterId}
::= { rlOspfAsbLnkTable 1 }
RlOspfAsbLnkEntry ::=
SEQUENCE {
rlOspfAsbLnkAreaId
AreaID,
rlOspfAsbLnkLsid
IpAddress,
rlOspfAsbLnkRouterId
RouterID,
rlOspfAsbLnkSequence
Integer-32,
rlOspfAsbLnkAge
Integer-32,
rlOspfAsbLnkChecksum
Integer-32,
rlOspfAsbLnkLength
Unsigned-32,
rlOspfAsbLnkMetric
Unsigned-32
}
rlOspfAsbLnkAreaId OBJECT-TYPE
SYNTAX AreaID
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The 32 bit identifier of the Area from which
the LSA was received."
REFERENCE
"OSPF Version 2, Appendix C.2 Area parameters"
::= { rlOspfAsbLnkEntry 1 }
rlOspfAsbLnkLsid OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Link State ID is an LS Type Specific field
containing either a Router ID or an IP Address;
it identifies the piece of the routing domain
that is being described by the advertisement."
REFERENCE
"OSPF Version 2, Section 12.1.4 Link State ID"
::= { rlOspfAsbLnkEntry 2 }
rlOspfAsbLnkRouterId OBJECT-TYPE
SYNTAX RouterID
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The 32 bit number that uniquely identifies the
originating router in the Autonomous System."
REFERENCE
"OSPF Version 2, Appendix C.1 Global parameters"
::= { rlOspfAsbLnkEntry 3 }
rlOspfAsbLnkSequence OBJECT-TYPE
SYNTAX Integer-32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The sequence number field is a signed 32-bit
integer. It is used to detect old and duplicate
link state advertisements. The space of sequence
numbers is linearly ordered. The larger the
sequence number the more recent the advertisement."
REFERENCE
"OSPF Version 2, Section 12.1.6 LS sequence number"
::= { rlOspfAsbLnkEntry 4 }
rlOspfAsbLnkAge OBJECT-TYPE
SYNTAX Integer-32 -- Should be 0..MaxAge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This field is the age of the link state
advertisement in seconds."
REFERENCE
"OSPF Version 2, Section 12.1.1 LS age"
::= { rlOspfAsbLnkEntry 5 }
rlOspfAsbLnkChecksum OBJECT-TYPE
SYNTAX Integer-32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This field is the checksum of the complete contents
of the advertisement, excepting the age field.
The age field is excepted so that an advertisement's
age can be incremented without updating the checksum.
The checksum used is the same that is used for ISO
connectionless datagrams; it is commonly referred
to as the Fletcher checksum."
REFERENCE
"OSPF Version 2, Section 12.1.7 LS checksum"
::= { rlOspfAsbLnkEntry 6 }
rlOspfAsbLnkLength OBJECT-TYPE
SYNTAX Unsigned-32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The lenth in bytes of the LSA.
This includes the 20 byte LSA header."
::= { rlOspfAsbLnkEntry 7 }
rlOspfAsbLnkMetric OBJECT-TYPE
SYNTAX Unsigned-32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The cost of using this router link."
::= { rlOspfAsbLnkEntry 8 }
-- OSPF External LSA
rlOspfAseLnkTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlOspfAseLnkEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"External Link State Advertisement."
::= { rlOspf 8 }
rlOspfAseLnkEntry OBJECT-TYPE
SYNTAX RlOspfAseLnkEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry from External LSA."
INDEX { rlOspfAseLnkLsid,
rlOspfAseLnkRouterId}
::= { rlOspfAseLnkTable 1 }
RlOspfAseLnkEntry ::=
SEQUENCE {
rlOspfAseLnkLsid
IpAddress,
rlOspfAseLnkRouterId
RouterID,
rlOspfAseLnkSequence
Integer-32,
rlOspfAseLnkAge
Integer-32,
rlOspfAseLnkChecksum
Integer-32,
rlOspfAseLnkLength
Unsigned-32,
rlOspfAseLnkMask
IpAddress,
rlOspfAseLnkFrwAddress
IpAddress,
rlOspfAseLnkBitE
INTEGER,
rlOspfAseLnkMetric
Unsigned-32,
rlOspfAseLnkTag
Unsigned-32
}
rlOspfAseLnkLsid OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Link State ID is an LS Type Specific field
containing either a Router ID or an IP Address;
it identifies the piece of the routing domain
that is being described by the advertisement."
REFERENCE
"OSPF Version 2, Section 12.1.4 Link State ID"
::= { rlOspfAseLnkEntry 1 }
rlOspfAseLnkRouterId OBJECT-TYPE
SYNTAX RouterID
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The 32 bit number that uniquely identifies the
originating router in the Autonomous System."
REFERENCE
"OSPF Version 2, Appendix C.1 Global parameters"
::= { rlOspfAseLnkEntry 2 }
rlOspfAseLnkSequence OBJECT-TYPE
SYNTAX Integer-32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The sequence number field is a signed 32-bit
integer. It is used to detect old and duplicate
link state advertisements. The space of sequence
numbers is linearly ordered. The larger the
sequence number the more recent the advertisement."
REFERENCE
"OSPF Version 2, Section 12.1.6 LS sequence number"
::= { rlOspfAseLnkEntry 3 }
rlOspfAseLnkAge OBJECT-TYPE
SYNTAX Integer-32 -- Should be 0..MaxAge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This field is the age of the link state
advertisement in seconds."
REFERENCE
"OSPF Version 2, Section 12.1.1 LS age"
::= { rlOspfAseLnkEntry 4 }
rlOspfAseLnkChecksum OBJECT-TYPE
SYNTAX Integer-32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This field is the checksum of the complete contents
of the advertisement, excepting the age field.
The age field is excepted so that an advertisement's
age can be incremented without updating the checksum.
The checksum used is the same that is used for ISO
connectionless datagrams; it is commonly referred
to as the Fletcher checksum."
REFERENCE
"OSPF Version 2, Section 12.1.7 LS checksum"
::= { rlOspfAseLnkEntry 5 }
rlOspfAseLnkLength OBJECT-TYPE
SYNTAX Unsigned-32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The lenth in bytes of the LSA.
This includes the 20 byte LSA header."
::= { rlOspfAseLnkEntry 6 }
rlOspfAseLnkMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Value depends on the link's Type field."
::= { rlOspfAseLnkEntry 7 }
rlOspfAseLnkFrwAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Data traffic for the advertised destination
will be forwarded to this address. If the
Forwarding address is set to 0.0.0.0, data
traffic will be forwarded instead to the LSA's
originator (i.e., the responsible AS boundary router)."
::= { rlOspfAseLnkEntry 8 }
rlOspfAseLnkBitE OBJECT-TYPE
SYNTAX INTEGER {
off(1),
on(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type of external metric. If bit E is set,
the metric specified is a Type 2 external metric."
::= { rlOspfAseLnkEntry 9 }
rlOspfAseLnkMetric OBJECT-TYPE
SYNTAX Unsigned-32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The cost of this route."
::= { rlOspfAseLnkEntry 10 }
rlOspfAseLnkTag OBJECT-TYPE
SYNTAX Unsigned-32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A 32-bit field attached to each external route."
::= { rlOspfAseLnkEntry 11 }
--Extention to ospfVirtIfTable
rlospfVirtIfExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlospfVirtIfExtEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The Virtual Interface Table describes the virtual
links that the OSPF Process is configured to carry on."
::= { rlOspf 9 }
rlospfVirtIfExtEntry OBJECT-TYPE
SYNTAX RlospfVirtIfExtEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The OSPF virtual interface table
extension for md5 authentication"
AUGMENTS { ospfVirtIfEntry }
::= { rlospfVirtIfExtTable 1 }
RlospfVirtIfExtEntry ::= SEQUENCE {
rlospfVirtifKeyChain DisplayString
}
rlospfVirtifKeyChain OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Name of the key-chain which ospf virtual
interface uses for md5 authentication"
::= { rlospfVirtIfExtEntry 1 }
--IP address table mib ver
rlIpAddrTableMibVersion OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IpAddrTable MIB's version."
::= {ipSpec 15 }
rlIpCidrRouteExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlIpCidrRouteExtEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Augmenting ipCidrRouteTable (ip forwarfing information table)
for added info as read only"
::= {ipSpec 16 }
rlIpCidrRouteExtEntry OBJECT-TYPE
SYNTAX RlIpCidrRouteExtEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A row of the table ipCidrRouteTable Extended
by this definition."
AUGMENTS { ipCidrRouteEntry }
::= {rlIpCidrRouteExtTable 1 }
RlIpCidrRouteExtEntry ::= SEQUENCE {
rlIpCidrRouteProto INTEGER
}
rlIpCidrRouteProto OBJECT-TYPE
SYNTAX INTEGER {
local(1), -- local interface
netmgmt(2), -- static route
rip(3), -- Berkeley RIP or RIP-II
ospfInternal(4), -- Open Shortest Path First Internal Route
ospfExternal(5), -- Open Shortest Path First External Route
ospfAggregateNetRange(6), -- Open Shortest Path First
bgp4Internal(7), -- Border Gateway Protocol Internal Route
bgp4External(8), -- Border Gateway Protocol External Route
aggregateRoute(9), --
other(10) -- not specified
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Added infor for ipCidrRouteTable.
extends the info of ipCidrRouteProto to show the route inner protocol.
Allowes the user to see which type of route in the protocol
e.g. ospf internal, ospf external."
::= { rlIpCidrRouteExtEntry 1 }
rlIpStaticRoute OBJECT IDENTIFIER ::= { ipSpec 17 }
rlIpStaticRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlIpStaticRouteEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This entity's static (user configured) IP Routing table.
entries are accessible even if not used for forwarding "
::= { rlIpStaticRoute 1 }
rlIpStaticRouteEntry OBJECT-TYPE
SYNTAX RlIpStaticRouteEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A particular Static(user configured) route to a particular destina-
tion, under a particular policy."
INDEX { rlIpStaticRouteDest,
rlIpStaticRouteMask,
rlIpStaticRouteTos,
rlIpStaticRouteNextHop }
::= { rlIpStaticRouteTable 1 }
RlIpStaticRouteEntry ::= SEQUENCE {
rlIpStaticRouteDest IpAddress,
rlIpStaticRouteMask IpAddress,
rlIpStaticRouteTos INTEGER,
rlIpStaticRouteNextHop IpAddress,
rlIpStaticRouteMetric INTEGER,
rlIpStaticRouteType INTEGER,
rlIpStaticRouteNextHopAS INTEGER,
rlIpStaticRouteForwardingStatus INTEGER,
rlIpStaticRouteRowStatus RowStatus
}
rlIpStaticRouteDest OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The destination IP address of this route.
This object may not take a Multicast (Class D)
address value.
Any assignment (implicit or otherwise) of an
instance of this object to a value x must be
rejected if the bitwise logical-AND of x with
the value of the corresponding instance of the
rlIpStaticRouteMask object is not equal to x."
::= { rlIpStaticRouteEntry 1 }
rlIpStaticRouteMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicate the mask to be logical-ANDed with the
destination address before being compared to
the value in the rlIpStaticRouteDest field. For
those systems that do not support arbitrary
subnet masks, an agent constructs the value of
the rlIpStaticRouteMask by reference to the IP Ad-
dress Class.
Any assignment (implicit or otherwise) of an
instance of this object to a value x must be
rejected if the bitwise logical-AND of x with
the value of the corresponding instance of the
rlIpStaticRouteDest object is not equal to ipCidrRoute-
Dest."
::= { rlIpStaticRouteEntry 2 }
rlIpStaticRouteTos OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"See ipCidrRouteTos definition
For now only value 0 is valid"
::= { rlIpStaticRouteEntry 3 }
rlIpStaticRouteNextHop OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"On remote routes, the address of the next sys-
tem en route; Otherwise, 0.0.0.0."
::= { rlIpStaticRouteEntry 4 }
rlIpStaticRouteMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The routing metric for this route.
The semantics of this metric are determined by the user.
normal semantic will be next hop count or some administarative distance
to create routing policy."
::= { rlIpStaticRouteEntry 5 }
rlIpStaticRouteType OBJECT-TYPE
SYNTAX INTEGER {
reject (1), -- route which discards traffic
local (2), -- local interface
remote (3) -- remote destination
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The type of route. Note that local(3) refers
to a route for which the next hop is the final
destination this is the case when user overides the a local interface
entry to change it parameters;
remote(4) refers to a route for
which the next hop is not the final destina-
tion.
reject (2) refers to a route which, if matched, discards
the message as unreachable. This is may be used as a means of
correctly aggregating routes, When static routes are distributed (leaked)
to other protocols."
::= { rlIpStaticRouteEntry 6 }
rlIpStaticRouteNextHopAS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The Autonomous System Number of the Next Hop.
The semantics of this object are determined by
the routing-protocol specified in the route's
ipCidrRouteProto value. When this object is
unknown or not relevant its value should be set
to zero."
DEFVAL { 0 }
::= { rlIpStaticRouteEntry 7 }
rlIpStaticRouteForwardingStatus OBJECT-TYPE
SYNTAX INTEGER {
active (1),
inactive (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"active - An indication that the route has implication on routing
inactive - the route is a backup route or it is down. It is not used
in forwarding decision.
Down means that the Ip interface on which it is configured is down.
(Note: ip interface down may be for two reason - its admin status or
the L2 interface , on which the ip interface is configured, status"
::= { rlIpStaticRouteEntry 8 }
rlIpStaticRouteRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The row status variable, used according to
row installation and removal conventions."
::= { rlIpStaticRouteEntry 9 }
-- Obsolete
-- virtualLan OBJECT IDENTIFIER ::= { rnd 27 }
-- Obsolete
-- rsConf OBJECT IDENTIFIER ::= { rnd 28 }
rsTunning OBJECT IDENTIFIER ::= { rnd 29 }
rsHighPriority OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable indicates the time interval the forwarding task inside the
RS works in High Priority Mode."
::= { rsTunning 1 }
rsLowPriority OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable indicates the time interval the forwarding task inside the
RS works in Low Priority Mode."
::= { rsTunning 2 }
rsDbgLevel OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable indicates the debug level the Router Server works.
the range of this variable is 1..100 "
::= { rsTunning 3 }
rsDiagnosticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF RsDiagnosticsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The diagnostics table of the agent"
::= { rsTunning 4 }
rsDiagnosticsEntry OBJECT-TYPE
SYNTAX RsDiagnosticsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The row definition for this table."
INDEX { rsDiagnosticsRequestId }
::= { rsDiagnosticsTable 1}
RsDiagnosticsEntry ::= SEQUENCE {
rsDiagnosticsRequestId INTEGER,
rsDiagnosticsCode INTEGER,
rsDiagnosticsLocation INTEGER,
rsDiagnosticsText DisplayString
}
rsDiagnosticsRequestId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The request id of the rejected SNMP request whose diagnostics are
specified by this entry. If request id 0xFFFFFFFF is given,
the diagnostic of the last rejected SNMP
request sent by the querying NMS is returned."
::= {rsDiagnosticsEntry 1}
rsDiagnosticsCode OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The code of the rejected the SNMP request whose diagnostics are
specified by this entry. This code may be used to find out the reason
for rejection if the diagnostic text is unavailable."
::= {rsDiagnosticsEntry 2}
rsDiagnosticsLocation OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The internal location in the SW rejecting the SNMP request whose
diagnostics are specified by this entry. This information is available
for debugging purposes only and will be returned in GET requests only if
rsDbgLevel >= 99. "
::= {rsDiagnosticsEntry 3}
rsDiagnosticsText OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..160))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The diagnostic text of the rejected SNMP request whose diagnostics are
specified by this entry."
::= {rsDiagnosticsEntry 4}
rsConfirmMessagTab OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable enables the operator to confirm all the message in the
event Message Table."
::= { rsTunning 5 }
eventMessageTable OBJECT-TYPE
SYNTAX SEQUENCE OF EventMessageEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The Event Message table of the agent"
::= { rsTunning 6 }
eventMessageEntry OBJECT-TYPE
SYNTAX EventMessageEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The row definition for this table."
INDEX { eventNum }
::= {eventMessageTable 1}
EventMessageEntry ::= SEQUENCE {
eventNum INTEGER,
eventDesc DisplayString
}
eventNum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The event number,the index of this table."
::= {eventMessageEntry 1}
eventDesc OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The event discription, this text will include time and severity."
::= {eventMessageEntry 2}
reaTunning OBJECT IDENTIFIER ::= { rsTunning 7 }
reaIpForwardEnable OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The Platform will perform fast IP forwarding if only if this
variable's value is enable."
::= { reaTunning 4 }
reaIpxForwardEnable OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The Platform will perform fast IPX forwarding if only if this
variable's value is enable."
::= { reaTunning 5 }
rsMaxEntriesTuning OBJECT IDENTIFIER ::= { rsTunning 8 }
rsMaxBridgeForwardingEntriesTuning OBJECT IDENTIFIER ::= { rsMaxEntriesTuning 1}
rsMaxBrgFrwEntries OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Maximal number of entries in bridge forwarding table."
::= { rsMaxBridgeForwardingEntriesTuning 1 }
rsMaxBrgFrwEntriesAfterReset OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Future maximal number of entries in bridge forwarding table."
::= { rsMaxBridgeForwardingEntriesTuning 2 }
rsMaxIpForwardingEntriesTuning OBJECT IDENTIFIER ::= { rsMaxEntriesTuning 2}
rsMaxIpFrwEntries OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Maximal number of entries in Ip forwarding table."
::= { rsMaxIpForwardingEntriesTuning 1 }
rsMaxIpFrwEntriesAfterReset OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Future maximal number of entries in Ip forwarding table."
::= { rsMaxIpForwardingEntriesTuning 2 }
rsMaxArpEntriesTuning OBJECT IDENTIFIER ::= { rsMaxEntriesTuning 3}
rsMaxArpEntries OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Maximal number of entries in Arp forwarding table."
::= { rsMaxArpEntriesTuning 1 }
rsMaxArpEntriesAfterReset OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Future maximal number of entries in Arp forwarding table."
::= { rsMaxArpEntriesTuning 2 }
rsMaxIpxForwardingEntriesTuning OBJECT IDENTIFIER ::= { rsMaxEntriesTuning 4}
rsMaxIpxFrwEntries OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Maximal number of entries in Ipx forwarding table."
::= { rsMaxIpxForwardingEntriesTuning 1 }
rsMaxIpxFrwEntriesAfterReset OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Future maximal number of entries in Ipx forwarding table."
::= { rsMaxIpxForwardingEntriesTuning 2 }
rsMaxIpxSapEntriesTuning OBJECT IDENTIFIER ::= { rsMaxEntriesTuning 5}
rsMaxIpxSapEntries OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Maximal number of entries in IpxSap table."
::= { rsMaxIpxSapEntriesTuning 1 }
rsMaxIpxSapEntriesAfterReset OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Future maximal number of entries in IpxSap table."
::= { rsMaxIpxSapEntriesTuning 2 }
rsMaxDspClntEntriesTuning OBJECT IDENTIFIER ::= { rsMaxEntriesTuning 6}
rsMaxDspClntEntries OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Maximal number of entries in rsSdClientsTable."
::= { rsMaxDspClntEntriesTuning 1 }
rsMaxDspClntEntriesAfterReset OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Future maximal number of entries in rsSdClientsTable."
::= { rsMaxDspClntEntriesTuning 2 }
-- Obsolete
-- rsMaxZeroHopRoutEntriesTuning OBJECT IDENTIFIER ::= { rsMaxEntriesTuning 7}
-- Obsolete
-- rsMaxDspFrmEntriesTuning OBJECT IDENTIFIER ::= { rsMaxEntriesTuning 8}
rsMaxIpFftEntriesTuning OBJECT IDENTIFIER ::= { rsMaxEntriesTuning 9}
rsMaxIpSFftEntries OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current maximal size of one IP SFFT Table."
::= { rsMaxIpFftEntriesTuning 1 }
rsMaxIpSFftEntriesAfterReset OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The future (after reset) maximal size of one IP SFFT Table."
::= { rsMaxIpFftEntriesTuning 2 }
rsMaxIpNFftEntries OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current maximal size of one IP NFFT Table."
::= { rsMaxIpFftEntriesTuning 3 }
rsMaxIpNFftEntriesAfterReset OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The future (after reset) maximal size of one IP NFFT Table."
::= { rsMaxIpFftEntriesTuning 4 }
rsMaxIpSFftSysEntries OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current maximal size of the SYSTEM IP SFFT Table."
::= { rsMaxIpFftEntriesTuning 5 }
rsMaxIpSFftSysEntriesAfterReset OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The future (after reset) maximal size of the SYSTEM IP SFFT Table."
::= { rsMaxIpFftEntriesTuning 6 }
rsMaxIpNFftSysEntries OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current maximal size of the SYSTEM IP NFFT Table."
::= { rsMaxIpFftEntriesTuning 7 }
rsMaxIpNFftSysEntriesAfterReset OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The future (after reset) maximal size of the SYSTEM IP NFFT Table."
::= { rsMaxIpFftEntriesTuning 8 }
rsMaxIpNextHopEntries OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current maximal size of one IP NextHop Table."
::= { rsMaxIpFftEntriesTuning 9 }
rsMaxIpNextHopEntriesAfterReset OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The future (after reset) maximal size of one NextHop Table."
::= { rsMaxIpFftEntriesTuning 10 }
rsMaxIpxFftEntriesTuning OBJECT IDENTIFIER ::= { rsMaxEntriesTuning 10}
rsMaxIpxSFftEntries OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current maximal size of one IPX SFFT Table."
::= { rsMaxIpxFftEntriesTuning 1 }
rsMaxIpxSFftEntriesAfterReset OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The future (after reset) maximal size of one IPX SFFT Table."
::= { rsMaxIpxFftEntriesTuning 2 }
rsMaxIpxNFftEntries OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current maximal size of one IPX NFFT Table."
::= { rsMaxIpxFftEntriesTuning 3 }
rsMaxIpxNFftEntriesAfterReset OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The future (after reset) maximal size of one IPX NFFT Table."
::= { rsMaxIpxFftEntriesTuning 4 }
rsMaxIpxSFftSysEntries OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current maximal size of the SYSTEM IPX SFFT Table."
::= { rsMaxIpxFftEntriesTuning 5 }
rsMaxIpxSFftSysEntriesAfterReset OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The future (after reset) maximal size of the SYSTEM IPX SFFT Table."
::= { rsMaxIpxFftEntriesTuning 6 }
rsMaxIpxNFftSysEntries OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current maximal size of the SYSTEM IPX NFFT Table."
::= { rsMaxIpxFftEntriesTuning 7 }
rsMaxIpxNFftSysEntriesAfterReset OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The future (after reset) maximal size of the SYSTEM IPX NFFT Table."
::= { rsMaxIpxFftEntriesTuning 8 }
rsMaxDhcpTuning OBJECT IDENTIFIER ::= { rsMaxEntriesTuning 11}
rsMaxDhcpConns OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current maximal number of DHCP connections."
::= { rsMaxDhcpTuning 1 }
rsMaxDhcpConnsAfterReset OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The future (after reset) maximal number of DHCP connections."
::= { rsMaxDhcpTuning 2 }
-- obsolete
-- rsMaxDhcpClients OBJECT-TYPE
-- ::= { rsMaxDhcpTuning 3 }
rsMaxIpmTuning OBJECT IDENTIFIER ::= { rsMaxEntriesTuning 12}
rsMaxIpmFftEntriesTuning OBJECT IDENTIFIER ::= { rsMaxIpmTuning 1 }
rsMaxIpmFftEntries OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current maximal number of the IPM FFT Tables."
::= { rsMaxIpmFftEntriesTuning 1 }
rsMaxIpmFftEntriesAfterReset OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The future (after reset) maximal number of the IPM FFT Tables."
::= { rsMaxIpmFftEntriesTuning 2 }
rsIpmFftAging OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The aging timeout of the IPM FFT Tables."
::= { rsMaxIpmFftEntriesTuning 3 }
rsMaxIgmpTuning OBJECT IDENTIFIER ::= { rsMaxIpmTuning 2 }
rsMaxIgmpInterfaceEntries OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Maximal number of entries in the IGMP Neighbor Table."
::= { rsMaxIgmpTuning 1 }
rsMaxIgmpInterfaceEntriesAfterReset OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Future maximal number of entries in the IGMP Neighbor Table."
::= { rsMaxIgmpTuning 2 }
rsMaxIgmpCacheEntries OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Maximal number of entries in the IGMP Cache Table."
::= { rsMaxIgmpTuning 3 }
rsMaxIgmpCacheEntriesAfterReset OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Future maximal number of entries in the IGMP Cache Table."
::= { rsMaxIgmpTuning 4 }
rsMaxPimTuning OBJECT IDENTIFIER ::= { rsMaxIpmTuning 3 }
rsMaxPimNeighborEntries OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Maximal number of entries in the PIM Neighbor Table."
::= { rsMaxPimTuning 1 }
rsMaxPimNeighborEntriesAfterReset OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Future maximal number of entries in the PIM Neighbor Table."
::= { rsMaxPimTuning 2 }
rsMaxPimRouteEntries OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Maximal number of entries in the PIM Route Table."
::= { rsMaxPimTuning 3 }
rsMaxPimRouteEntriesAfterReset OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Future maximal number of entries in the PIM Route Table."
::= { rsMaxPimTuning 4 }
rsMaxPimRouteNextHopEntries OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Maximal number of entries in the PIM Route Next Hop Table."
::= { rsMaxPimTuning 5 }
rsMaxPimRouteNextHopEntriesAfterReset OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Future maximal number of entries in the PIM Route Next Hop Table."
::= { rsMaxPimTuning 6 }
rsMaxPimInterfaceEntriesAfterReset OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Future maximal number of interfaces in the PIM Interface Table."
::= { rsMaxPimTuning 7 }
rsMaxPimInterfaceEntries OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Maximal number of interfaces in the PIM Interface Table."
::= { rsMaxPimTuning 8 }
rsMaxDvmrpTuning OBJECT IDENTIFIER ::= { rsMaxIpmTuning 4 }
rsMaxDvmrpNeighborEntries OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Maximal number of entries in the Dvmrp Neighbor Table."
::= { rsMaxDvmrpTuning 1 }
rsMaxDvmrpNeighborEntriesAfterReset OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Future maximal number of entries in the Dvmrp Neighbor Table."
::= { rsMaxDvmrpTuning 2 }
rsMaxDvmrpRouteEntries OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Maximal number of entries in the Dvmrp Route Table."
::= { rsMaxDvmrpTuning 3 }
rsMaxDvmrpRouteEntriesAfterReset OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Future maximal number of entries in the Dvmrp Route Table."
::= { rsMaxDvmrpTuning 4 }
rsMaxDvmrpMRouteEntries OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Maximal number of entries in the Dvmrp Multicast Route Table."
::= { rsMaxDvmrpTuning 5 }
rsMaxDvmrpMRouteEntriesAfterReset OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Future maximal number of entries in the Dvmrp Multicast Route Table."
::= { rsMaxDvmrpTuning 6 }
rsMaxDvmrpInterfaceEntries OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Maximal number of interfaces in the Dvmrp Interface Table."
::= { rsMaxDvmrpTuning 7 }
rsMaxDvmrpInterfaceEntriesAfterReset OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Future maximal number of interfaces in the Dvmrp Interface Table."
::= { rsMaxDvmrpTuning 8 }
rsMaxPigmpTuning OBJECT IDENTIFIER ::= { rsMaxIpmTuning 5 }
rsMaxPigmpRouteEntries OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Maximal number of entries in the IGMP Proxy Routing Table."
::= { rsMaxPigmpTuning 1 }
rsMaxPigmpRouteEntriesAfterReset OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Future maximal number of entries in the IGMP Proxy Routing Table."
::= { rsMaxPigmpTuning 2 }
rsMaxPimSmTuning OBJECT IDENTIFIER::= { rsMaxIpmTuning 6}
rsMaxPimSmNeighborEntries OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Maximal number of entries in the PIM Neighbor Table."
::= { rsMaxPimSmTuning 1 }
rsMaxPimSmNeighborEntriesAfterReset OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Future maximal number of entries in the PIM Neighbor Table."
::= { rsMaxPimSmTuning 2 }
rsMaxPimSmRouteEntries OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Maximal number of entries in the PIM Route Table."
::= { rsMaxPimSmTuning 3 }
rsMaxPimSmRouteEntriesAfterReset OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Future maximal number of entries in the PIM Route Table."
::= { rsMaxPimSmTuning 4 }
rsMaxPimSmInterfaceEntries OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Maximal number of entries in the PIM Interface Table."
::= { rsMaxPimSmTuning 5 }
rsMaxPimSmInterfaceEntriesAfterReset OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Future maximal number of entries in the PIM Interface Table."
::= { rsMaxPimSmTuning 6 }
rsMaxPimSmRPSetEntries OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Maximal number of entries in the RPSet Table."
::= { rsMaxPimSmTuning 7 }
rsMaxPimSmRPSetEntriesAfterReset OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Future maximal number of entries in the RPSet Table."
::= { rsMaxPimSmTuning 8 }
rsMaxPimSmCRPEntries OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Maximal number of entries in the RPSet Table."
::= { rsMaxPimSmTuning 9 }
rsMaxPimSmCRPEntriesAfterReset OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Future maximal number of entries in the RPSet Table."
::= { rsMaxPimSmTuning 10 }
rsMaxRmonTuning OBJECT IDENTIFIER ::= { rsMaxEntriesTuning 13}
rsMaxRmonLogEntries OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Maximal number of entries in RMON Log table."
::= { rsMaxRmonTuning 1 }
rsMaxRmonLogEntriesAfterReset OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Future maximal number of entries in RMON Log table."
::= { rsMaxRmonTuning 2 }
rsMaxRmonEtherHistoryEntries OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Maximal number of entries in RMON EtherHistory table."
::= { rsMaxRmonTuning 3 }
rsMaxRmonEtherHistoryEntriesAfterReset OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Future maximal number of entries in RMON EtherHistory table."
::= { rsMaxRmonTuning 4 }
rsMaxIgmpSnoopTuning OBJECT IDENTIFIER ::= { rsMaxEntriesTuning 14}
rsMaxIgmpSnoopGroupEntries OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum number of entries in the IGMP Snooping group table."
::= { rsMaxIgmpSnoopTuning 1 }
rsMaxIgmpSnoopGroupEntriesAfterReset OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Future maximal number of entries in the IGMP Snooping group table."
::= { rsMaxIgmpSnoopTuning 2 }
rsMaxVlansTuning OBJECT IDENTIFIER ::= { rsMaxEntriesTuning 15}
rsMaxVlansEntries OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum number of entries in the VLANs table."
::= { rsMaxVlansTuning 1 }
rsMaxVlansEntriesAfterReset OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Future maximal number of entries in the VLANs table."
::= { rsMaxVlansTuning 2 }
rsMaxPolicyTuning OBJECT IDENTIFIER ::= { rsMaxEntriesTuning 16 }
rsMaxPolicyMaxRulesEntries OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Maximal number of entries in the Policy Route Table."
::= { rsMaxPolicyTuning 1 }
rsMaxPolicyMaxRulesEntriesAfterReset OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Future maximal number of entries in the Policy Route Table."
::= { rsMaxPolicyTuning 2 }
rsMaxPolicySimpleMibMaxRulesEntries OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Maximal number of entries in the Policy SimpleMib Table."
::= { rsMaxPolicyTuning 3 }
rsMaxPolicySimpleMibMaxRulesEntriesAfterReset OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Future maximal number of entries in the Policy SimpleMib Table."
::= { rsMaxPolicyTuning 4 }
rsMaxPolicySimpleMibMaxProfilesEntries OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Maximal number of entries in the profile Policy SimpleMib Table."
::= { rsMaxPolicyTuning 5 }
rsMaxPolicySimpleMibMaxProfilesEntriesAfterReset OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Future maximal number of entries in the profile Policy SimpleMib Table."
::= { rsMaxPolicyTuning 6 }
rsMaxGvrpVlansTuning OBJECT IDENTIFIER ::= { rsMaxEntriesTuning 17}
rsMaxGvrpVlans OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum number of VLANs that can participant in Gvrp."
::= { rsMaxGvrpVlansTuning 1 }
rsMaxGvrpVlansAfterReset OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Future maximal number of VLANs that can participant in Gvrp."
::= { rsMaxGvrpVlansTuning 2 }
rsMaxTraceRouteTuning OBJECT IDENTIFIER ::= { rsMaxEntriesTuning 18 }
rsMaxTraceRouteControlEntries OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum number of trace route control entries."
::= { rsMaxTraceRouteTuning 1 }
rsMaxTraceRouteControEntriesAfterReset OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Future maximum number of trace route control entries."
::= { rsMaxTraceRouteTuning 2 }
rsMaxTraceRouteProbeHistoryEntries OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum number of trace route probe history entries."
::= { rsMaxTraceRouteTuning 3 }
rsMaxTraceRouteProbeHistoryEntriesAfterReset OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Future maximum number of trace route probe history entries."
::= { rsMaxTraceRouteTuning 4 }
rsMaxSnmpTuning OBJECT IDENTIFIER ::= { rsMaxEntriesTuning 19 }
rsMaxSnmpCommunityEntries OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum number of snmpCommunityTable entries."
::= { rsMaxSnmpTuning 1 }
rsMaxSnmpCommunityEntriesAfterReset OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Future maximum number of snmpCommunityTable entries."
DEFVAL { 16 }
::= { rsMaxSnmpTuning 2 }
rsMaxSocketTuning OBJECT IDENTIFIER ::= { rsMaxEntriesTuning 20 }
rsMaxNumberOfSockets OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Maximal number of sockets."
::= { rsMaxSocketTuning 1}
rsMaxNumberOfSocketsAfterReset OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Future Maximal number of sockets."
::= { rsMaxSocketTuning 2 }
rsMaxSizeOfSocketDataPool OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Maximal size of socket data pool."
::= { rsMaxSocketTuning 3}
rsMaxSizeOfSocketDataPoolAfterReset OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Future Maximal size of socket data pool."
::= { rsMaxSocketTuning 4 }
rsMaxIpRouteTuning OBJECT IDENTIFIER ::= { rsMaxEntriesTuning 21}
rsMaxIpPrefixes OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Maximal number of IP prefixes that router supports."
::= { rsMaxIpRouteTuning 1 }
rsMaxIpPrefixesAfterReset OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"FutureMaximal number of IP prefixes that router supports. "
::= { rsMaxIpRouteTuning 2 }
rsMaxIpNextHopSetTuning OBJECT IDENTIFIER ::= { rsMaxEntriesTuning 22}
rsMaxIpNextHopSetEntries OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Maximal number of NextHops that may be
used for forwarding for a destinaton."
::= { rsMaxIpNextHopSetTuning 1 }
rsMaxIpNextHopSetEntriesAfterReset OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"FutureMaximal number of NextHops that may be
used for forwarding for a destinaton. "
::= { rsMaxIpNextHopSetTuning 2 }
rsMaxIpEcmpTuning OBJECT IDENTIFIER ::= { rsMaxEntriesTuning 23}
rsMaxIpEcmpEntrySize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Maximum number of ECMP Sets for forwarding."
::= { rsMaxIpEcmpTuning 1 }
rsMaxIpEcmpEntrySizeAfterReset OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"FutureMaximum number of ECMP Sets for forwarding. "
::= { rsMaxIpEcmpTuning 2 }
-- Obsolete
-- rsFftAgingTuning OBJECT IDENTIFIER ::= { rsTunning 9 }
-- Obsolete
-- rsFftNetworkTuning OBJECT IDENTIFIER ::= { rsTunning 10 }
rsTcpTuning OBJECT IDENTIFIER ::= { rsTunning 11 }
rsTcpMemoryPoolSizeAfterReset OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The size of the memory pool that the tcp will allocate after reset.
The memory pool is used for sending packets"
::= { rsTcpTuning 1 }
rsTcpMemoryPoolSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The size of the memory pool that the tcp uses currently.
The memory pool is used for sending packets"
::= { rsTcpTuning 2 }
rsRadiusTuning OBJECT IDENTIFIER ::= { rsTunning 12 }
rsRadiusMemoryPoolSizeAfterReset OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The size of the memory pool that radius will allocate after reset.
The memory pool is used for attributes"
::= { rsRadiusTuning 1 }
rsRadiusMemoryPoolSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The size of the memory pool that radius uses currently.
The memory pool is used for attributes"
::= { rsRadiusTuning 2 }
rlSyslogTuning OBJECT IDENTIFIER ::= { rsTunning 13 }
rlSyslogFilePercentToDeleteWhenCompacting OBJECT-TYPE
SYNTAX Unsigned-32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"When the flash file which is used by reports becomes full,
a certain percentage of the old messages on flash are deleted.
This is the current value."
::= { rlSyslogTuning 3}
rlSyslogFilePercentToDeleteWhenCompactingAfterReset OBJECT-TYPE
SYNTAX Unsigned-32
ACCESS read-write
STATUS mandatory
DESCRIPTION
"When the flash file which is used by reports becomes full,
a certain percentage of the old messages on flash are deleted.
This is the value after reset."
::= { rlSyslogTuning 4}
rlSyslogCacheSize OBJECT-TYPE
SYNTAX Unsigned-32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The size of memory cache of last errors reported.
This cache is cyclic. This is the current value."
::= { rlSyslogTuning 5 }
rlSyslogCacheSizeAfterReset OBJECT-TYPE
SYNTAX Unsigned-32
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The size of memory cache of last errors reported.
This cache is cyclic. This is the value after reset."
::= { rlSyslogTuning 6 }
rlMngInfTuning OBJECT IDENTIFIER ::= { rsTunning 14 }
rlMaxNumberOfAccessRules OBJECT-TYPE
SYNTAX INTEGER
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The Maximum number of rules per Access List that can be defined"
::= { rlMngInfTuning 1}
rlMaxNumberOfAccessRulesAfterReset OBJECT-TYPE
SYNTAX INTEGER
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The Maximum number of rules per Access List for after reset tuning"
::= { rlMngInfTuning 2}
rlSshTuning OBJECT IDENTIFIER ::= { rsTunning 15 }
rlSshMaxAuthorizedKeysAfterReset OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The maximum amount of authorized user keys the SSH deamon will store
after reset."
::= { rlSshTuning 1 }
rlSshMaxAuthorizedKeys OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum amount of authorized user keys the SSH deamon stores
currently."
::= { rlSshTuning 2 }
rsDiagnosticTextSource OBJECT-TYPE
SYNTAX INTEGER {fromCLI(1), fromDiagnosticsTable(2)}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The source from which SNMP diagnostics message texts should be
taken."
DEFVAL { fromCLI }
::= { rsTunning 16 }
rsMultiSession OBJECT IDENTIFIER ::= { rsTunning 17 }
rsMultiSessionMaxSessionsAfterReset OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The maximum number of terminal sessions (serial, telnet and ssh)
available after reset."
::= { rsMultiSession 1 }
rsMultiSessionMaxSessions OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum number of terminal sessions (serial, telnet and ssh)
available."
::= { rsMultiSession 2 }
rlDnsClTuning OBJECT IDENTIFIER ::= { rsTunning 18 }
rlMaxDnsClCacheEntries OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current maximal number of DNS client cache entries."
::= { rlDnsClTuning 1 }
rlMaxDnsClCacheEntriesAfterReset OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The future (after reset) maximal number of DNS client cache
entries."
::= { rlDnsClTuning 2 }
-- table to show tuning : limits curent and after reset values
rlTuningParamsTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlTuningParamsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"table to show tuning : limits curent and after reset values."
::= { rsTunning 19 }
rlTuningParamsEntry OBJECT-TYPE
SYNTAX RlTuningParamsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Defines the contents of each line in the rlTuningParamsTable table."
INDEX { IMPLIED rlTuningParamsName }
::= { rlTuningParamsTable 1 }
RlTuningParamsEntry ::= SEQUENCE {
rlTuningParamsName DisplayString,
rlTuningParamsCurrentValue INTEGER,
rlTuningParamsAfterResetValue INTEGER,
rlTuningParamsDefaultValue INTEGER,
rlTuningParamsMinimalValue INTEGER,
rlTuningParamsMaximalValue INTEGER
}
rlTuningParamsName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..80))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Index to the rlTuningParamsTable.
name of current value Mib for this entry. "
::= { rlTuningParamsEntry 1 }
rlTuningParamsCurrentValue OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" This variable current value used in this run by the system."
::= { rlTuningParamsEntry 2 }
rlTuningParamsAfterResetValue OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" This variable value that will be used in next run by the system.
i.e. the value will be effective after next reboot"
::= { rlTuningParamsEntry 3 }
rlTuningParamsDefaultValue OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" This variable value that is used by the system as default."
::= { rlTuningParamsEntry 4 }
rlTuningParamsMinimalValue OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable value indicate minimum value.
this is the lower limit for editing the value after reset."
::= { rlTuningParamsEntry 5 }
rlTuningParamsMaximalValue OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable value indicate maximum value.
This is the upper limit for editing the value after reset."
::= { rlTuningParamsEntry 6 }
rlHostParamTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlHostParamEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"table to show tuning : limits curent and after reset values."
::= { rsTunning 20}
rlHostParamEntry OBJECT-TYPE
SYNTAX RlHostParamEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Defines the contents of each line in the rlHostParamTable table."
INDEX { IMPLIED rlHostParamName }
::= { rlHostParamTable 1 }
RlHostParamEntry ::= SEQUENCE {
rlHostParamName DisplayString,
rlHostParamValue INTEGER
}
rlHostParamName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..80))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Index to the rlHostParamTable.
name of current value Mib for this entry. "
::= { rlHostParamEntry 1 }
rlHostParamValue OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" This variable current value used in this run by the system."
::= { rlHostParamEntry 2 }
-- OSPF Tuning
rlOspfTuning OBJECT IDENTIFIER ::= { rsTunning 21 }
rlMaxOspfInterfaces OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current maximum number of ospf interfaces."
::= { rlOspfTuning 1 }
rlMaxOspfInterfacesAfterReset OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The future (after reset) maximum number of ospf interfaces."
::= { rlOspfTuning 2 }
rlMaxOspfAreas OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current maximum number of ospf areas."
::= { rlOspfTuning 3 }
rlMaxOspfAreasAfterReset OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The future (after reset) maximum number of ospf areas."
::= { rlOspfTuning 4 }
rlMaxOspfNeighbors OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current maximum number of ospf neighbors."
::= { rlOspfTuning 5 }
rlMaxOspfNeighborsAfterReset OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The future (after reset) maximum number of ospf neighbors."
::= { rlOspfTuning 6 }
rlMaxOspfAbrPerArea OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current maximum number of ABR in ospf area."
::= { rlOspfTuning 7 }
rlMaxOspfAbrPerAreaAfterReset OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The future (after reset) maximum number of ABR in ospf area."
::= { rlOspfTuning 8 }
rlMaxOspfNetsInAs OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current maximum number of networks in AS."
::= { rlOspfTuning 9 }
rlMaxOspfNetsInAsAfterReset OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The future (after reset) maximum number of networks in AS."
::= { rlOspfTuning 10 }
-- Obsolete
-- rndISDN OBJECT IDENTIFIER ::= { rnd 30}
-- Obsolete
-- rndPPP OBJECT IDENTIFIER ::= { rnd 31 }
-- Obsolete
-- frameRelay OBJECT IDENTIFIER ::= { rnd 34 }
rndApplications OBJECT IDENTIFIER ::= { rnd 35 }
-- Obsolete
-- rsServerDispatcher OBJECT IDENTIFIER ::= { rndApplications 1}
-- rndMidLevelManagement group contains variables which direct the mid-level
-- management stations how to monitor and manage their domains.
rndMidLevelManagement OBJECT IDENTIFIER ::= { rndApplications 2} -- NEW Group
rndAlarmOptions OBJECT IDENTIFIER ::= { rndMidLevelManagement 2}
rndAlarmEnabling OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates whether alarms should be issued to the high-level
NMS "
::= { rndAlarmOptions 1 }
rndAlarmInterval OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates the minimal period of time which must pass after issuing
an alarm before issuing the same alarm again."
::= { rndAlarmOptions 2 }
rndMonitoredElementsTable OBJECT-TYPE
SYNTAX SEQUENCE OF RndMonitoredElementEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The table of monitored elements of the network"
::= {rndMidLevelManagement 3}
rndMonitoredElementEntry OBJECT-TYPE
SYNTAX RndMonitoredElementEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" The row definition for this table."
INDEX { rndMonitoredElementAddress }
::= {rndMonitoredElementsTable 1}
RndMonitoredElementEntry ::= SEQUENCE {
rndMonitoredElementAddress IpAddress,
rndMonitoredElementCommunity DisplayString(SIZE(1..20)),
rndMonitoredElementLabel DisplayString(SIZE(1..20)),
rndDefaultPollingInterval INTEGER,
rndDefaultLogFile DisplayString,
rndMonitoredElementStatus RowStatus
}
rndMonitoredElementAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IP address of the monitored element"
::= {rndMonitoredElementEntry 1 }
rndMonitoredElementCommunity OBJECT-TYPE
SYNTAX DisplayString(SIZE(1..20))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The community of the monitored element"
::= {rndMonitoredElementEntry 2 }
rndMonitoredElementLabel OBJECT-TYPE
SYNTAX DisplayString(SIZE(1..20))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The label assigned by the network manager to the monitored element"
::= {rndMonitoredElementEntry 3}
rndDefaultPollingInterval OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The default period of time between two consecutive pollings of the
monitored element for the value of an object instance. If no other polling
interval is specifically assigned to the monitored object instance, this
one will be used"
::= {rndMonitoredElementEntry 4}
rndDefaultLogFile OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The default file path of the log-file which will contain the polling
results for the monitored element. If no other file path is specifically
assigned to the monitored object instance, this log-file will be used."
::= {rndMonitoredElementEntry 5}
rndMonitoredElementStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"It is used to manage the monitored elements table and indicates
the current monitoring status of an element."
::= {rndMonitoredElementEntry 6}
rndMonitoringTable OBJECT-TYPE
SYNTAX SEQUENCE OF RndMonitoringEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The table of monitored object instances. Each monitored object instance
belongs to a monitored element previously entered in the
rndMonitoredElementsTable. "
::= {rndMidLevelManagement 4}
rndMonitoringEntry OBJECT-TYPE
SYNTAX RndMonitoringEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" The row definition for this table."
INDEX { rndMonitoredElement, IMPLIED rndMonitoredObjectInstanceLabel }
::= {rndMonitoringTable 1}
RndMonitoringEntry ::= SEQUENCE {
rndMonitoredElement DisplayString(SIZE(1..20)),
rndMonitoredObjectInstanceLabel DisplayString,
rndMonitoredObjectName DisplayString,
rndMonitoredObjectIdentifier OBJECT IDENTIFIER,
rndMonitoredObjectInstance OBJECT IDENTIFIER,
rndMonitoredObjectSyntax INTEGER,
rndMonitoringInterval INTEGER,
rndAlarmMaxTreshold INTEGER,
rndAlarmMinTreshold INTEGER,
rndMonitoringLogfile DisplayString,
rndMonitoringEntryStatus RowStatus,
rndMonitoredIntegerInstance INTEGER
}
rndMonitoredElement OBJECT-TYPE
SYNTAX DisplayString(SIZE(1..20))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A label assigned by the network manager to a monitored element to
which this monitored object instance belongs. This label must have
been previously entered in an instance of rndMonitoredElementLabel"
::= {rndMonitoringEntry 1}
rndMonitoredObjectInstanceLabel OBJECT-TYPE
SYNTAX DisplayString(SIZE(1..20))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The label assigned by the network manager to the monitored object instance"
::= {rndMonitoringEntry 2}
rndMonitoredObjectName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..20))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The symbolic object type name of the object to which the monitored object
instance belongs (as it appears the MIB module definition). In case of
ambiguity the <MIB module name> : <object type name> format should be used.
An instance of rndMonitoredObjectName need not be assigned any value, if
the corresponding instance of rndMonitoredObjectIdentifier is assigned a
value, since any one of these, together with the object instance
identifier, suffices to unambigously identify the monitored object
instance."
::= {rndMonitoringEntry 3}
rndMonitoredObjectIdentifier OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The object identifier of the object to which the monitored object
instance belongs.
An instance of rndMonitoredObjectIdentifier need not be assigned any value, if
the corresponding instance of rndMonitoredObjectName is assigned a value,
since any one of these, together with the object instance identifier,
suffices to unambigously identify the monitored object instance."
::= {rndMonitoringEntry 4}
rndMonitoredObjectInstance OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The instance identifier (key) of the monitored object instance."
::= {rndMonitoringEntry 5}
rndMonitoredObjectSyntax OBJECT-TYPE
SYNTAX INTEGER {
integer(1),
octet-string(2),
ip-address(3),
object-identifier(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The syntax of the monitored object instance (i.e., the syntax of the object
type of the object to which the monitored instance belongs).
Need not be assigned any value if the corresponding instance of
rndMonitoredObjectName has been assigned a value"
::= {rndMonitoringEntry 6}
rndMonitoringInterval OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The period of time between two consecutive retrievals of the monitored
object instance's value."
::= {rndMonitoringEntry 7}
rndAlarmMaxTreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The value of the monitored object instance, the exceeding of which
will cause the generation of an alarm to the high-level management
station."
::= {rndMonitoringEntry 8}
rndAlarmMinTreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"If the value of the monitored object instance falls below the value
assigned to rndAlarmMinTreshold, an alarm to the high-level management
station will be issued."
::= {rndMonitoringEntry 9}
rndMonitoringLogfile OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The entire path of the file in which the results of the monitoring
of this object instance should be recorded."
::= {rndMonitoringEntry 10}
rndMonitoringEntryStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"It is used to manage the monitored object instances table and
indicates the current monitoring status of an object instance."
::= {rndMonitoringEntry 11}
rndMonitoredIntegerInstance OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= {rndMonitoringEntry 12}
rndMibFilesTable OBJECT-TYPE
SYNTAX SEQUENCE OF RndMibFileEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The table of monitored object instances. Each monitored object instance
belongs to a monitored element previously entered in the
rndMonitoredElementsTable. "
::= {rndMidLevelManagement 5}
rndMibFileEntry OBJECT-TYPE
SYNTAX RndMibFileEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" The row definition for this table."
INDEX { rndMibFileIndex }
::= {rndMibFilesTable 1}
RndMibFileEntry ::= SEQUENCE {
rndMibFileIndex INTEGER,
rndMibFilePath DisplayString,
rndMibFileRefresh INTEGER,
rndMibFileEntryStatus RowStatus
}
rndMibFileIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of the MIB file in the list MIB files supported by the
Mid-Level management station. The order of the MIB files in this
list must reflect the the IMPORT relation between the MIBS contained
in the MIB files, i.e., if MIB A IMPORTS FROM MIB B, the file containing
MIB A must have a lesser index in this table than the file containing
MIB B."
::= {rndMibFileEntry 1}
rndMibFilePath OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The path of the MIB file in the MIB file server."
::= {rndMibFileEntry 2}
rndMibFileRefresh OBJECT-TYPE
SYNTAX INTEGER {
no(1),
yes(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates if the file should be fetched after setting this entry from the
MIB file server."
::= {rndMibFileEntry 3}
rndMibFileEntryStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"It is used to manage the MIB files table."
::= {rndMibFileEntry 4}
rndHardwareConfiguration OBJECT-TYPE
SYNTAX TruthValue
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates whether the current SET SNMP PDU contains hardware
configuration (i.e., normally read-only variables). SET of such
variables in the Mid-level management station will be allowed only
if this variable is included in the SNMP PDU and its value is true.
Its value as returned in a GET SNMP PDU will always be false."
::= {rndMidLevelManagement 6}
rndEraseSimulatedConfiguration OBJECT-TYPE
SYNTAX INTEGER {
eraseSimulatedConfiguration(1),
simulatedConfigurationPresent(2),
simulatedConfigurationErased(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"eraseSimulatedConfiguration instructs the MLNMS to erase all the
simulated configuration from its configuration data-base (CDB). This
the only accepted value for SNMP SET statements and will never be
returned in SNMP GET statements.
simulatedConfigurationPresent indicates that the MLNMS currently has
a simulated configuration.
simulatedConfigurationErased indicates that the MLNMS currently has
no simulated configuration."
::= {rndMidLevelManagement 7}
rndDeleteValuesTable OBJECT-TYPE
SYNTAX SEQUENCE OF RndDeleteValuesEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table indicates which MIB variables are row status fields which
control the status of the entry to which they belong. This table also
indicates which (integer!) value of these MIB variables will cause, if
present in a SNMP SET PDU, the deletion of the conceptual row instance
to which the SET MIB variable instance belongs."
::= {rndMidLevelManagement 8}
rndDeleteValuesEntry OBJECT-TYPE
SYNTAX RndDeleteValuesEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" The row definition for the rndDeleteValuesTable table."
INDEX { IMPLIED rndRowStatusVariableName }
::= {rndDeleteValuesTable 1}
RndDeleteValuesEntry ::= SEQUENCE {
rndRowStatusVariableName DisplayString,
rndRowStatusObjectId OBJECT IDENTIFIER,
rndRowDeleteValue INTEGER,
rndDeleteValueEntryStatus RowStatus
}
rndRowStatusVariableName OBJECT-TYPE
SYNTAX DisplayString(SIZE(1..80))
-- ACCESS read-only
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The name of the row status field. This name may not necessarily be any
name which is present in the MIBs loaded into the MLNMS station."
::= {rndDeleteValuesEntry 1}
rndRowStatusObjectId OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The object id of the row status field. If the rndRowStatusVariableName is
a name present in the MIBs loaded into the MLNMS, this MIB
variable is not required, but if given, it must match the object id known
to the MLNMS.
The variable identified by rndRowStatusVariableName and/or rndRowStatusObjectId
must be a read-write MIB variable of type INTEGER which belongs to an
entry (i.e, is a child of a MIB variable of type SEQUENCE)."
::= {rndDeleteValuesEntry 2}
rndRowDeleteValue OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The value of the variable identified by rndRowStatusVariableName and/or
rndRowStatusObjectId, which, if present in a SNMP SET PDU, will cause
the deletion of the conceptual row instance which the SET MIB variable
instance belongs."
::= {rndDeleteValuesEntry 3}
rndDeleteValueEntryStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"It is used to delete an entry from this table."
::= {rndDeleteValuesEntry 4}
snmpTesting OBJECT IDENTIFIER ::= { rndMidLevelManagement 9}
rndSimulatedVariablesTable OBJECT-TYPE
SYNTAX SEQUENCE OF RndSimulatedVariablesEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table indicates which MIB variables are simulated."
::= {snmpTesting 1}
rndSimulatedVariablesEntry OBJECT-TYPE
SYNTAX RndSimulatedVariablesEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" The row definition for the rndSimulatedVariablesTable table."
INDEX { rndSimulatedVariableEntryIndex }
::= {rndSimulatedVariablesTable 1}
RndSimulatedVariablesEntry ::= SEQUENCE {
rndSimulatedVariableEntryIndex INTEGER,
rndSimulatedVariableObjectId OBJECT IDENTIFIER,
rndNotSupportedField INTEGER,
rndSimulatedVariableEntryStatus RowStatus
}
rndSimulatedVariableEntryIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index entry."
::= {rndSimulatedVariablesEntry 1}
rndSimulatedVariableObjectId OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The object id of the simulated variable. If the simulated variable belongs
to a table entry, the entire entry is henceforth supported."
::= {rndSimulatedVariablesEntry 2}
rndNotSupportedField OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Variable for not supported simulation."
::= {rndSimulatedVariablesEntry 3}
rndSimulatedVariableEntryStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"It is used to delete an entry from this table."
::= {rndSimulatedVariablesEntry 4}
rndSnmpTestPassword OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable enables the user supplying the correct code to use the
SNMP test feature."
::= {snmpTesting 2}
rndSnmpTests OBJECT-TYPE
SYNTAX INTEGER {
noSimulation(1),
simulateSetFailure(2),
simulateAppGet(3),
simulateAppGetNext(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable enables the authorized user to test various SNMP features."
::= {snmpTesting 3}
rndSimulateUndo OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable enables the authorized user to test the SNMP UNDO feature."
::= {snmpTesting 4}
rlSnmpServTestRequest OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable enables the authorized user to test the SNMP SERV package."
::= {snmpTesting 5}
rlSnmpServTestResponse OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable enables the authorized user to retrieve the results of
a the SNMP SERV package test."
::= {snmpTesting 6}
rlSnmpServCreateTestPool OBJECT-TYPE
SYNTAX INTEGER { create(1), no-create(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable enables the authorized user to indicate that after its reset
the device should create a buffer pool for SNMPServ process PDU
testing."
::= {snmpTesting 7}
rlSnmpServITCbindClients OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable enables the authorized user to to indicate that after
its reset the device should create ITC clients for SnmpServ data
requests clients.
The semantics of this variable is as follows:
subidentifier 2*n indicates whether the client n is synchronous(1) or
asynchronous(2)
subidentifier 2*n+1 indicates the number of simulatneous requests
expected by client n."
::= {snmpTesting 8}
rlSnmpTestSimulatedVariables OBJECT IDENTIFIER ::= {snmpTesting 9}
rsIpZeroHopRouting OBJECT IDENTIFIER ::= { rndApplications 3} -- NEW Group
-- ROS: this group isn't supported
rsIpZhrGeneralStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This parameter enables or disables the IP Zero Hop Routing feature
for all IP interfaces. The IP Zero Hop Routing feature can also be
enabled or disabled on each IP interface through the
rsIpZhrStatusTable."
DEFVAL {2}
::= { rsIpZeroHopRouting 1 }
rsIpZhrAgingTimeout OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This parameter controls the aging time-out in seconds of direct
connections which were allocated. The virtual IP address of a direct
connection whose time-out has expired is eligible for allocation to a
different connection."
DEFVAL {600}
::= { rsIpZeroHopRouting 2 }
rsIpZhrStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF RsIpZhrStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The administrative status of the ZHR feature per ip interface."
::= { rsIpZeroHopRouting 3 }
rsIpZhrStatusEntry OBJECT-TYPE
SYNTAX RsIpZhrStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" An entry in the ZHR status table. "
INDEX { rsIpZhrStatusIpIntf}
::= { rsIpZhrStatusTable 1 }
RsIpZhrStatusEntry ::= SEQUENCE {
rsIpZhrStatusIpIntf IpAddress,
rsIpZhrAdminStatus INTEGER
}
rsIpZhrStatusIpIntf OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The Ip interface whose ZHR feature status is accessed. "
::= {rsIpZhrStatusEntry 1}
rsIpZhrAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"It is used to control whether ZHR will operate on the interface. "
DEFVAL {1}
::= {rsIpZhrStatusEntry 2}
rsIpZhrVirtAddressTable OBJECT-TYPE
SYNTAX SEQUENCE OF RsIpZhrVirtAddressEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The table of free virtual IP addresses which may be allocated
to establish direct connections - Per IP Interface."
::= { rsIpZeroHopRouting 4 }
rsIpZhrVirtAddressEntry OBJECT-TYPE
SYNTAX RsIpZhrVirtAddressEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" An entry in the ZHR virtual IP addresses table "
INDEX { rsIpZhrVirtAddressIpIntf,
rsIpZhrVirtAddressTo }
::= { rsIpZhrVirtAddressTable 1 }
RsIpZhrVirtAddressEntry ::= SEQUENCE {
rsIpZhrVirtAddressIpIntf IpAddress,
rsIpZhrVirtAddressTo IpAddress,
rsIpZhrVirtAddressFrom IpAddress,
rsIpZhrVirtAddressStatus RowStatus
}
rsIpZhrVirtAddressIpIntf OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The Ip Interface to which the IP addresses in this entry are allocated."
::= {rsIpZhrVirtAddressEntry 1}
rsIpZhrVirtAddressTo OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The last free IP address in the block. "
::= {rsIpZhrVirtAddressEntry 2}
rsIpZhrVirtAddressFrom OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The first free IP address in the block. "
::= {rsIpZhrVirtAddressEntry 3}
rsIpZhrVirtAddressStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"It is used to manage the virtual address table.
The supported actions will be active, createAndGo and destroy. "
::= {rsIpZhrVirtAddressEntry 4}
rsIpZhrConnectionsTable OBJECT-TYPE
SYNTAX SEQUENCE OF RsIpZhrConnectionEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of the currently active direct connections."
::= { rsIpZeroHopRouting 5}
rsIpZhrConnectionEntry OBJECT-TYPE
SYNTAX RsIpZhrConnectionEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" An entry in the ZHR Connection table"
INDEX {rsIpZhrConnectionIpIntf,
rsIpZhrConnectionSrcIp,
rsIpZhrConnectionDestIp}
::= { rsIpZhrConnectionsTable 1 }
RsIpZhrConnectionEntry ::= SEQUENCE {
rsIpZhrConnectionIpIntf IpAddress,
rsIpZhrConnectionSrcIp IpAddress,
rsIpZhrConnectionDestIp IpAddress,
rsIpZhrConnectionVirtualIp IpAddress,
rsIpZhrConnectionType INTEGER,
rsIpZhrConnectionAge INTEGER,
rsIpZhrConnectionStatus RowStatus
}
rsIpZhrConnectionIpIntf OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The IP Interface for which this direct connection was established. "
::= {rsIpZhrConnectionEntry 1}
rsIpZhrConnectionSrcIp OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The source IP Address of this direct connection. "
::= {rsIpZhrConnectionEntry 2}
rsIpZhrConnectionDestIp OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The destination IP Address of this direct connection. "
::= {rsIpZhrConnectionEntry 3}
rsIpZhrConnectionVirtualIp OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The virtual IP address allocated for this direct connection. "
::= {rsIpZhrConnectionEntry 4}
rsIpZhrConnectionType OBJECT-TYPE
SYNTAX INTEGER {
static(1),
dynamic(2),
disabled(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The type of this direct connection.
dynamic - established by the RS.
disabled - established by the RS.
The RS detected that the virtual address is already used as
destination by the source BEFORE its allocation, and therefore
marked this connection as 'disabled' to prevent a future
allocation of this virtual address to this source.
static - established by user."
::= {rsIpZhrConnectionEntry 5}
rsIpZhrConnectionAge OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The age of the connection in seconds."
::= {rsIpZhrConnectionEntry 6}
rsIpZhrConnectionStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"It is used to manage the connections table.
The supported actions will be active, createAndGo and destroy. "
::= {rsIpZhrConnectionEntry 7}
rsIpZhrConnectionAging OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Aging of a PowerIp connection in seconds. Default is 1hr ."
::= { rsIpZeroHopRouting 6}
rsIpZhrIcmpRdrNum OBJECT-TYPE
SYNTAX INTEGER (1..50)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Number of Icmp redirects sent by the PowerIp to a station requesting a
connection. Default is 3"
::= { rsIpZeroHopRouting 7}
rsIpZhrIcmpRdrIntvl OBJECT-TYPE
SYNTAX INTEGER (1..60)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Time interval in seconds between retransmition of Icmp redirects sent
by the PowerIp to a station requesting a connection. Default is 30."
::= { rsIpZeroHopRouting 8}
rsIpZhrRedirectTimeout OBJECT-TYPE
SYNTAX INTEGER (100..5000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Timeout in msec between redirects for deletion of a connection.
Default is 1000 msec."
::= { rsIpZeroHopRouting 9}
rsIpZhrRedirectNum OBJECT-TYPE
SYNTAX INTEGER (1..10)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Number of redirects sent to delete a connection.
Default is 5."
::= { rsIpZeroHopRouting 10}
rsIpZhrRedirectQueueSize OBJECT-TYPE
SYNTAX INTEGER (1..1000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Max num of redirects that can be sent at once.
Default is 10."
::= { rsIpZeroHopRouting 11}
rsPingMIB OBJECT IDENTIFIER ::= { rndApplications 4} -- NEW Group
rsPingTable OBJECT-TYPE
SYNTAX SEQUENCE OF RsPingEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of ping request entries."
::= { rsPingMIB 1 }
rsPingEntry OBJECT-TYPE
SYNTAX RsPingEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A ping request entry.
A management station wishing to create an entry should
first generate a pseudo-random serial number to be used
as the index to this sparse table. It must also create in the same
PDU the associated instance of the address object. It should also
modify in the same PDU the default values for the other configuration
objects if the defaults are not appropriate.
Once the sequence completes, the management station should
retrieve the values of the status objects of interest, and
should then delete the entry. In order to prevent old
entries from clogging the table, entries will be aged out,
but an entry will never be deleted within 5 minutes of
completing."
INDEX { rsPingAddress }
::= { rsPingTable 1 }
RsPingEntry ::= SEQUENCE {
rsPingAddress IpAddress,
rsPingPacketCount INTEGER,
rsPingPacketSize INTEGER,
rsPingPacketTimeout INTEGER,
rsPingDelay INTEGER,
rsPingTrapOnCompletion TruthValue,
rsPingSentPackets Counter,
rsPingReceivedPackets Counter,
rsPingMinReturnTime INTEGER,
rsPingAvgReturnTime INTEGER,
rsPingMaxReturnTime INTEGER,
rsPingCompletionStatus INTEGER,
rsPingTimeStamp DisplayString,
rsPingEntryStatus RowStatus
}
rsPingAddress OBJECT-TYPE
SYNTAX IpAddress
-- Rsyntax OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The address of the device to be pinged.
Once an instance of this object is created, its
value can not be changed."
::= { rsPingEntry 1 }
rsPingPacketCount OBJECT-TYPE
SYNTAX INTEGER(1..2147483647)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the number of ping packets to send to the target
in this sequence."
-- DEFVAL { 5 }
::= { rsPingEntry 2 }
rsPingPacketSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the size of ping packets to send to the target
in this sequence. The lower and upper boundaries of this
object are implementation dependent."
-- DEFVAL { 100 }
::= { rsPingEntry 3 }
rsPingPacketTimeout OBJECT-TYPE
SYNTAX INTEGER(0..3600000)
-- Units
-- milliseconds
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the amount of time to wait for a response to a
transmitted packet before declaring the packet 'dropped.'"
-- DEFVAL { 2000 }
::= { rsPingEntry 4 }
rsPingDelay OBJECT-TYPE
SYNTAX INTEGER(0..3600000)
-- Units
-- milliseconds
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the minimum amount of time to wait before sending
the next packet in a sequence after receiving a response.
The actual delay may be greater due to internal task scheduling."
-- DEFVAL { 0 }
::= { rsPingEntry 5 }
rsPingTrapOnCompletion OBJECT-TYPE
SYNTAX TruthValue
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies whether or not a rsPingCompletion trap should
be issued on completion of the sequence of pings. If such a
trap is desired, the NMS should ensure that the community table
contains an instance specified by the NMSs IP address with
rndCommunityTrapsEnable = trapsEnable."
-- DEFVAL { false }
::= { rsPingEntry 6 }
rsPingSentPackets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of ping packets that have been sent to the target
in this sequence."
::= { rsPingEntry 7 }
rsPingReceivedPackets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of ping packets that have been received from the
target in this sequence."
::= { rsPingEntry 8 }
rsPingMinReturnTime OBJECT-TYPE
SYNTAX INTEGER
-- Units
-- milliseconds
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The minimum round trip time of all the packets that have
been sent in this sequence. The value returned to a GET request
is meaningless if no ping response in a sequence has been received
yet."
::= { rsPingEntry 9 }
rsPingAvgReturnTime OBJECT-TYPE
SYNTAX INTEGER
-- Units
-- milliseconds
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The average round trip time of all the packets that have
been sent in this sequence.The value returned to a GET request
is meaningless if no ping response in a sequence has been received
yet."
::= { rsPingEntry 10 }
rsPingMaxReturnTime OBJECT-TYPE
SYNTAX INTEGER
-- Units
-- milliseconds
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum round trip time of all the packets that have
been sent in this sequence.The value returned to a GET request
is meaningless if no ping response in a sequence has been received
yet."
::= { rsPingEntry 11 }
rsPingCompletionStatus OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
timeout(2),
net-unreachable(3),
host-unreachable(4),
protocol-unreachable(5),
time-to-live-exceeded(6),
reassembly-time-exceeded(7),
unable-to-send(8),
bad-reply-data(9),
incomplete(10)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"If all the echo request packets in this sequence have been
responded by valid echo responses, this object is set to ok.
Otherwise this status indicates the problem. bad-reply-data indicates
that the reply data is not equal to the response data."
::= { rsPingEntry 12 }
rsPingTimeStamp OBJECT-TYPE
SYNTAX DisplayString(SIZE(19))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The time-stamp indicating the time and date of creation or last
update of this request. The format of the time-stamp is
dd/mm/yyyy hh:mm:ss"
::= { rsPingEntry 13 }
rsPingEntryStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The status of this table entry."
::= { rsPingEntry 14 }
rsPowerSupplyRedundacy OBJECT IDENTIFIER ::= { rndApplications 5} -- NEW Group
rsPowerSupplyRedundacyTable OBJECT-TYPE
SYNTAX SEQUENCE OF RsPowerSupplyRedundacyEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The power supply redundancy table."
::= { rsPowerSupplyRedundacy 1 }
rsPowerSupplyRedundacyEntry OBJECT-TYPE
SYNTAX RsPowerSupplyRedundacyEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The status of power supply redundancy for this table."
INDEX { rsPowerSupplyRedundacyReNumber}
::= { rsPowerSupplyRedundacyTable 1}
RsPowerSupplyRedundacyEntry ::= SEQUENCE {
rsPowerSupplyRedundacyReNumber INTEGER,
rsPowerSupplyRedundacyStatus INTEGER
}
rsPowerSupplyRedundacyReNumber OBJECT-TYPE
SYNTAX INTEGER (1..31)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This number identifies the module backed up
by power supply redundancy in the stack."
::= { rsPowerSupplyRedundacyEntry 1}
rsPowerSupplyRedundacyStatus OBJECT-TYPE
SYNTAX INTEGER{
notExist(1),
existButNotWorking(2),
bothWorking(3),
internalOnlyWorking(4),
externalOnlyWorking(5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of a power supply redundancy of the entry."
::= { rsPowerSupplyRedundacyEntry 2}
rsNvram OBJECT IDENTIFIER ::= { rndApplications 6 }
rsEraseNvramAfterReset OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..20))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The name of NVRAM application that will be erased
after reset or ALL if all NVRAM should be erased."
::= { rsNvram 1 }
rsNvramApplTable OBJECT-TYPE
SYNTAX SEQUENCE OF RsNvramApplEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The NVRAM application table."
::= { rsNvram 2 }
rsNvramApplEntry OBJECT-TYPE
SYNTAX RsNvramApplEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The status of NVRAM application table."
INDEX { rsNvramApplIndex}
::= { rsNvramApplTable 1}
RsNvramApplEntry ::= SEQUENCE {
rsNvramApplIndex INTEGER,
rsNvramApplName DisplayString
}
rsNvramApplIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index of NVRAM application table."
::= { rsNvramApplEntry 1}
rsNvramApplName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..20))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of application used NVRAM."
::= { rsNvramApplEntry 2}
rndOGCompression OBJECT IDENTIFIER ::= { rnd 36 }
rndCompressionTable OBJECT-TYPE
SYNTAX SEQUENCE OF RndCompressionEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table defines the compression parameter of an interface."
::= { rndOGCompression 2 }
rndCompressionEntry OBJECT-TYPE
SYNTAX RndCompressionEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The row definition for this table."
INDEX { rndCmprssIfIndex}
::= { rndCompressionTable 1 }
RndCompressionEntry ::= SEQUENCE {
rndCmprssIfIndex INTEGER,
rndCmprssAdminStatus INTEGER,
rndCmprssMode INTEGER,
rndCmprssRate INTEGER
}
rndCmprssIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The interface addressed by this entry."
::= {rndCompressionEntry 1}
rndCmprssAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates whether compression should be performed/negotiated on this
interface or not."
::= {rndCompressionEntry 2}
rndCmprssMode OBJECT-TYPE
SYNTAX INTEGER {
single(1),
normal(2),
fast(3),
auto(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"In mode single the local node will clear its history before every
compress operation.
This is preferable when the link has a high error rate.
In mode normal the local node will adjust itself to the peer
request concerning history maintenance.
To achieve a better compression ratio the local node will perform
slow down the compression.
In mode fast the local node will adjust itself to the
peer request concerning history maintenance.
To achieve faster compression, the local node will lower the
compression ratio.
In mode auto, the local node will operate like in type fast and
will additionally keep track of the link error rate and
automatically change the history maintenance policy
(keep or clear), accordingly.
Changing this object may have effect only when the link is next
restarted."
::= {rndCompressionEntry 3}
rndCmprssRate OBJECT-TYPE
SYNTAX INTEGER (1..3000)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Percentage of compression. Higher values indicate better performance."
::= {rndCompressionEntry 4}
rndEthernet OBJECT IDENTIFIER ::= { rnd 37 }
-- ROS: this group isn't supported
-- see "swInterfaces OBJECT IDENTIFIER ::= { rnd 43 }"
rndEthIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF RndEthIfEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Ethernet media specific information and configuration of the device
interfaces."
::= { rndEthernet 1 }
rndEthIfEntry OBJECT-TYPE
SYNTAX RndEthIfEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Defines the contents of each line in the rndEthIfTable table."
INDEX { rndEthIfIndex }
::= { rndEthIfTable 1 }
RndEthIfEntry ::= SEQUENCE {
rndEthIfIndex INTEGER,
rndEthDuplexMode INTEGER,
rndEthIfSpeed INTEGER,
rndEthTransceiverType INTEGER,
rndEthFramesTooShort Counter,
rndEthFrames64Bytes Counter,
rndEthFrames65To127Bytes Counter,
rndEthFrames128To255Bytes Counter,
rndEthFrames256To511Bytes Counter,
rndEthFrames512To1023Bytes Counter,
rndEthFrames1024To1518Bytes Counter,
rndEthAutonegotiationMode INTEGER
}
rndEthIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Index to the rndEthIfTable. The interface defined by a
particular value of this index is the same interface as
identified by the same value of ifIndex (MIBII)."
::= { rndEthIfEntry 1 }
rndEthDuplexMode OBJECT-TYPE
SYNTAX INTEGER {
half(1),
full(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" This variable indicates whether this interface operates in half
duplex or full duplex mode."
::= { rndEthIfEntry 2 }
rndEthIfSpeed OBJECT-TYPE
SYNTAX INTEGER {
speed10BT(1),
speed100BT(2),
speed1000BT(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" This variable indicates whether this interface operates at 10BT,
100BT or 1000BT speed."
::= { rndEthIfEntry 3 }
rndEthTransceiverType OBJECT-TYPE
SYNTAX INTEGER {
regular(1),
fiberOptics(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" This variable indicates the transceiver type of this interface."
::= { rndEthIfEntry 4 }
rndEthFramesTooShort OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" This variable counts the number of frames less than 64 bytes long
which are correct."
::= { rndEthIfEntry 5 }
rndEthFrames64Bytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" This variable counts the number of frames which are 64 bytes long."
::= { rndEthIfEntry 6 }
rndEthFrames65To127Bytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" This variable counts the number of frames of size from 65 to 127."
::= { rndEthIfEntry 7 }
rndEthFrames128To255Bytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" This variable counts the number of frames of size from 128 to 255."
::= { rndEthIfEntry 8 }
rndEthFrames256To511Bytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" This variable counts the number of frames of size from 256 to 511."
::= { rndEthIfEntry 9 }
rndEthFrames512To1023Bytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" This variable counts the number of frames of size from 512 to 1023."
::= { rndEthIfEntry 10 }
rndEthFrames1024To1518Bytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" This variable counts the number of frames of size from 1023 to 1518."
::= { rndEthIfEntry 11 }
rndEthAutonegotiationMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" This variable indicates whether this interface has autonegotiation enabled."
::= { rndEthIfEntry 12 }
rsDHCP OBJECT IDENTIFIER ::= { rnd 38 }
-- obsolete
-- rsDNSIPAddr OBJECT-TYPE
-- ::= { rsDHCP 1 }
-- obsolete
-- rsDhcpProbeEnable OBJECT-TYPE
-- ::= { rsDHCP 2 }
-- obsolete
-- rsDhcpProbeTimeout OBJECT-TYPE
-- ::= { rsDHCP 3 }
-- obsolete
-- rsDhcpProbeRetries OBJECT-TYPE
-- ::= { rsDHCP 4 }
-- obsolete
-- rsDhcpServerEnable OBJECT-TYPE
-- ::= { rsDHCP 5 }
-- obsolete
-- rsDhcpRelaySecThreshold OBJECT-TYPE
-- ::= { rsDHCP 6 }
-- obsolete
-- rsDhcpNextServerAddress OBJECT-TYPE
-- ::= { rsDHCP 7 }
-- obsolete
-- rsDhcpDefaultLeaseTime OBJECT-TYPE
-- ::= { rsDHCP 8 }
-- obsolete
-- rsDhcpIPAddressAllocTable OBJECT-TYPE
-- ::= { rsDHCP 9 }
-- obsolete
-- rsDhcpDynamicTable OBJECT-TYPE
--::= { rsDHCP 10 }
-- obsolete
-- rsDhcpWinsPrime OBJECT-TYPE
-- ::= { rsDHCP 11 }
-- obsolete
-- rsDhcpWinsSecondary OBJECT-TYPE
-- ::= { rsDHCP 12 }
-- obsolete
-- rsDhcpWinsNodeType OBJECT-TYPE
-- ::= { rsDHCP 13 }
rsDhcpMibVersion OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"DHCP MIB's version, the current version is 4."
::= { rsDHCP 14 }
-- obsolete
-- rsDhcpMultipleRelaysTable OBJECT-TYPE
-- ::= { rsDHCP 15 }
-- obsolete
-- rsDhcpRelayEnable OBJECT-TYPE
-- ::= { rsDHCP 16 }
-- obsolete
-- rsDhcpEraseFlashDB OBJECT-TYPE
-- ::= { rsDHCP 17 }
-- obsolete
-- rsDhcpDBLocation OBJECT-TYPE
-- ::= { rsDHCP 18 }
-- obsolete
-- rsDhcpOptionsTable OBJECT-TYPE
-- ::= { rsDHCP 19 }
-- obsolete
-- rsDhcpServerExists OBJECT-TYPE
-- ::= { rsDHCP 20 }
-- obsolete
-- rsDhcpActualNumberOfEntries OBJECT-TYPE
-- ::= { rsDHCP 21 }
-- Obsolete
-- radWiz OBJECT IDENTIFIER ::= { rnd 39 }
-- Obsolete
-- rsCfgUpgrade OBJECT IDENTIFIER ::= { rnd 40 }
rsRMON OBJECT IDENTIFIER ::= { rnd 41 }
-- rsCopyPort was deleted
-- { rsRMON 1 } reserved
-- rsMonitPort was deleted
-- { rsRMON 2 } reserved
rsUDP OBJECT IDENTIFIER ::= { rnd 42}
rsUdpRelayTable OBJECT-TYPE
SYNTAX SEQUENCE OF RsUdpRelayEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains the udp relay configuration per port."
::= {rsUDP 1}
rsUdpRelayEntry OBJECT-TYPE
SYNTAX RsUdpRelayEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" The row definition for this table."
INDEX {rsUdpRelayDstPort,
rsUdpRelaySrcIpInf,
rsUdpRelayDstIpAddr }
::= {rsUdpRelayTable 1}
RsUdpRelayEntry ::= SEQUENCE {
rsUdpRelayDstPort INTEGER,
rsUdpRelaySrcIpInf IpAddress,
rsUdpRelayDstIpAddr IpAddress,
rsUdpRelayStatus RowStatus,
rsUdpRelayUserInfo INTEGER
}
rsUdpRelayDstPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The UDP port number in the UDP message header."
::= {rsUdpRelayEntry 1}
rsUdpRelaySrcIpInf OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The source interface IP that receives UDP message.
255.255.255.255 from all IP interface.
0.0.0.0 - 0.255.255.255 and 127.0.0.0 - 127.255.255.255
not relevant addresses."
-- DEFVAL { 255.255.255.255 }
::= {rsUdpRelayEntry 2}
rsUdpRelayDstIpAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The destination IP address the UDP message will be forward.
0.0.0.0 does not forward, 255.255.255.255 broadcasts to all
addresses."
-- DEFVAL { 255.255.255.255 }
::= {rsUdpRelayEntry 3}
rsUdpRelayStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The status of a table entry.
It is used to delete an entry from this table."
::= { rsUdpRelayEntry 4 }
rsUdpRelayUserInfo OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The information used for implementation purposes"
DEFVAL { 0 }
::= { rsUdpRelayEntry 5 }
rsUdpRelayMibVersion OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Mib version. The current version is 1."
::= {rsUDP 2}
swInterfaces OBJECT IDENTIFIER ::= { rnd 43 }
swIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwIfEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Switch media specific information and configuration of the device
interfaces."
::= { swInterfaces 1 }
swIfEntry OBJECT-TYPE
SYNTAX SwIfEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Defines the contents of each line in the swIfTable table."
INDEX { swIfIndex }
::= { swIfTable 1 }
SwIfEntry ::= SEQUENCE {
swIfIndex INTEGER,
swIfPhysAddressType INTEGER,
swIfDuplexAdminMode INTEGER,
swIfDuplexOperMode INTEGER,
swIfBackPressureMode INTEGER,
swIfTaggedMode INTEGER,
swIfTransceiverType INTEGER,
swIfLockAdminStatus INTEGER,
swIfLockOperStatus INTEGER,
swIfType INTEGER,
swIfDefaultTag INTEGER,
swIfDefaultPriority INTEGER,
swIfStatus RowStatus,
swIfFlowControlMode INTEGER,
swIfSpeedAdminMode INTEGER,
swIfSpeedDuplexAutoNegotiation INTEGER,
swIfOperFlowControlMode INTEGER,
swIfOperSpeedDuplexAutoNegotiation INTEGER,
swIfOperBackPressureMode INTEGER,
swIfAdminLockAction INTEGER,
swIfOperLockAction INTEGER,
swIfAdminLockTrapEnable TruthValue,
swIfOperLockTrapEnable TruthValue,
swIfOperSuspendedStatus TruthValue,
swIfLockOperTrapCount INTEGER,
swIfLockAdminTrapFrequency INTEGER,
swIfReActivate TruthValue,
swIfAdminMdix INTEGER,
swIfOperMdix INTEGER
}
swIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Index to the swIfTable. The interface defined by a
particular value of this index is the same interface as
identified by the same value of ifIndex (MIB II)."
::= { swIfEntry 1 }
swIfPhysAddressType OBJECT-TYPE
SYNTAX INTEGER {
default(1),
reserve(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" This variable indicates whether the physical address assigned to this
interface should be the default one or be chosen from the set of
reserved physical addresses of the device."
DEFVAL { default }
::= { swIfEntry 2 }
swIfDuplexAdminMode OBJECT-TYPE
SYNTAX INTEGER {
none(1),
half(2),
full(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable specifies whether this interface should operate in
half duplex or full duplex mode. This specification will take effect
only if swIfSpeedDuplexAutoNegotiation is disabled.
A value of 'none' is returned if a value of the variable
hasn't been set."
DEFVAL { none }
::= { swIfEntry 3 }
swIfDuplexOperMode OBJECT-TYPE
SYNTAX INTEGER {
half(1),
full(2),
hybrid(3),
unknown(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" This variable indicates whether this interface operates in half
duplex or full duplex mode.
This variable can have the values hybrid or unknown
only for a trunk.
unknown - only if trunk operative status is not present."
::= { swIfEntry 4 }
swIfBackPressureMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable indicates whether this interface activates back pressure
when congested."
DEFVAL { disable }
::= { swIfEntry 5 }
swIfTaggedMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"If enable, this interface operates in tagged mode, i.e all frames sent
out through this interface will have the 802.1Q header.
If disabled the frames will not be tagged."
DEFVAL { disable }
::= { swIfEntry 6 }
swIfTransceiverType OBJECT-TYPE
SYNTAX INTEGER {
regular(1),
fiberOptics(2),
comboRegular(3),
comboFiberOptics(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" This variable indicates the transceiver type of this interface."
::= { swIfEntry 7 }
swIfLockAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
locked(1),
unlocked(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable indicates whether this interface should operate in locked
or unlocked mode.
In unlocked mode the device learns all MAC addresses from this port and
forwards all frames arrived at this port. In locked mode no new MAC
addresses are learned and only frames with known source MAC
addresses are forwarded."
DEFVAL { unlocked }
::= { swIfEntry 8 }
swIfLockOperStatus OBJECT-TYPE
SYNTAX INTEGER {
locked(1),
unlocked(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable defines whether this interface operates in locked
or unlocked mode. It is locked in each of the following two cases:
1) if swLockAdminStatus is set to locked
2) no IP/IPX interface is defined over this interface and no
VLAN contains this interface.
In unlocked mode the device learns all MAC addresses from this port and
forwards all frames arrived at this port. In locked mode no new MAC
addresses are learned and only frames with known source MAC
addresses are forwarded."
::= { swIfEntry 9 }
swIfType OBJECT-TYPE
SYNTAX INTEGER {
eth10M(1),
eth100M(2),
eth1000M(3),
eth10G(4),
unknown(5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" This variable specifies the type of interface."
::= { swIfEntry 10 }
swIfDefaultTag OBJECT-TYPE
SYNTAX INTEGER (0..4095)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable specifies the default VLAN tag which will be attached
to outgoing frames if swIfTaggedMode for this interface is enabled."
DEFVAL { 0 }
::= { swIfEntry 11 }
swIfDefaultPriority OBJECT-TYPE
SYNTAX INTEGER (0..7)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" This variable specifies the default port priority."
DEFVAL { 0 }
::= { swIfEntry 12 }
swIfStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The status of a table entry.
It is used to delete an entry from this table."
::= { swIfEntry 13 }
swIfFlowControlMode OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2),
autoNegotiation(3),
enabledRx(4),
enabledTx(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"on - Flow control will be enabled on this interface according to the
IEEE 802.3x standard.
off - Flow control is disabled.
autoNegotiation - Flow control will be enabled or disabled on this
interface. If enabled, it will operate as specified
by the IEEE 802.3x standard.
enabledRx - Flow control will be enabled on this interface for
recieved frames.
enabledTx - Flow control will be enabled on this interface for
transmitted frames.
An attempt to set this object to 'enabledRx(4)' or 'enabledTx(5)'
will fail on interfaces that do not support operation
at greater than 100 Mb/s.
In any case, flow control can work only if swIfDuplexOperMode is
full."
DEFVAL { off }
::= { swIfEntry 14}
swIfSpeedAdminMode OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable specifies the required speed of this interface in bits
per second. This specification will take effect only if
swIfSpeedDuplexAutoNegotiation is disabled.
A value of 10 is returned for 10G.
A value of 0 is returned if the value of the variable
hasn't been set."
DEFVAL { 0 }
::= { swIfEntry 15 }
swIfSpeedDuplexAutoNegotiation OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"If enabled the speed and duplex mode will be set by the device through
the autonegotiation process. Otherwise these characteristics will be
set according to the values of swIfSpeedAdminMode and
swIfSpeedDuplexAutoNegotiation."
DEFVAL { enabled }
::= { swIfEntry 16 }
swIfOperFlowControlMode OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2),
enabledRx(3),
enabledTx(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"on - Flow control is enabled on this interface according to the
IEEE 802.3x standard.
off - Flow control is disabled.
enabledRx - Flow control is enabled on this interface for
recieved frames.
enabledTx - Flow control is enabled on this interface for
transmitted frames."
::= { swIfEntry 17}
swIfOperSpeedDuplexAutoNegotiation OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2),
hybrid(3),
unknown(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"If enabled the speed and duplex are determined by the device through
the autonegotiation process.
If disabled these characteristics are determined according to the values
of swIfSpeedAdminMode and swIfDuplexAdminMode.
hybrid - only for a trunk.
unknown - only for ports that there operative status is not present."
::= { swIfEntry 18 }
swIfOperBackPressureMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2),
hybrid(3),
unknown(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable indicates the operative back pressure mode of
this interface."
::= { swIfEntry 19 }
swIfAdminLockAction OBJECT-TYPE
SYNTAX INTEGER {
discard(1),
forwardNormal(2),
discardDisable(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable indicates which action this interface should be taken
in locked mode and therefore relevant only in locked mode.
Possible actions:
discard(1) - every packet is dropped.
forwardNormal(2) - every packet is forwarded according to the DST address.
discardDisable(3) - drops the first packet and suspends the port."
DEFVAL { discard }
::= { swIfEntry 20 }
swIfOperLockAction OBJECT-TYPE
SYNTAX INTEGER {
discard(1),
forwardNormal (2),
discardDisable(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable indicates which action this interface actually takes in
locked mode and therefore relevant only in locked mode.
Possible actions:
discard(1) - every packet is dropped.
forwardNormal(2) - every packet is forwarded according to the DST address.
discardDisable(3) - drops the first packet and suspends the port."
::= { swIfEntry 21 }
swIfAdminLockTrapEnable OBJECT-TYPE
SYNTAX TruthValue
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable indicates whether to create a SNMP trap in the locked mode."
DEFVAL { false }
::= { swIfEntry 22 }
swIfOperLockTrapEnable OBJECT-TYPE
SYNTAX TruthValue
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable indicates whether a SNMP trap can be created in the
locked mode."
::= { swIfEntry 23 }
swIfOperSuspendedStatus OBJECT-TYPE
SYNTAX TruthValue
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable indicates whether the port is suspended or not due to some
feature. After reboot this value is false"
::= { swIfEntry 24 }
swIfLockOperTrapCount OBJECT-TYPE
SYNTAX INTEGER (0 .. 2147483647 )
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable indicates the trap counter status per ifIndex
(i.e. number of received packets since the last trap sent due to a
packet which was received on this ifIndex). It's relevant only in locked
mode while trap is enabled."
::= { swIfEntry 25 }
swIfLockAdminTrapFrequency OBJECT-TYPE
SYNTAX INTEGER (1 .. 1000000)
-- UNITS "seconds"
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable indicates the minimal frequency (in seconds) of sending
a trap per ifIndex. It's relevant only in locked mode and in trap
enabled."
DEFVAL { 10 }
::= { swIfEntry 26 }
swIfReActivate OBJECT-TYPE
SYNTAX TruthValue
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable reactivates (enables) an ifIndex (which was suspended)"
DEFVAL { false }
::= { swIfEntry 27 }
swIfAdminMdix OBJECT-TYPE
SYNTAX INTEGER {
cross(1),
normal(2),
auto(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The configuration is on a physical port, not include trunks.
cross - The interface should force crossover.
normal - The interface should not force crossover.
auto - Auto mdix is enabled on the interface."
::= { swIfEntry 28 }
swIfOperMdix OBJECT-TYPE
SYNTAX INTEGER {
cross(1),
normal(2),
unknown(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"cross - The interface is in crossover mode.
normal - The interface is not in crossover mode.
unknown - Only for port that its operative status is not present
or down."
::= { swIfEntry 29 }
swIfMibVersion OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The swIfTable Mib's version , the current version is 1."
::= { swInterfaces 2 }
swIfPortLockSupport OBJECT-TYPE
SYNTAX INTEGER {
supported (1),
notSupported (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"indicates if the locked port package is supported."
::= { swInterfaces 3 }
swIfPortLockActionSupport OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"indicates which port lock actions are supported:
(bit 0 is the most significant bit)
bit 0 - discard
bit 1 - forwardNormal
bit 2 - discardDisable"
::= { swInterfaces 4 }
swIfPortLockTrapSupport OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"indicates with which port lock actions the trap option is supported
(e.g. discard indicates that trap is supported only when the portlock
action is discard):
(bit 0 is the most significant bit)
bit 0 - discard
bit 1 - forwardNormal
bit 2 - discardDisable"
::= { swInterfaces 5 }
-- Obsolete
-- securityZone OBJECT IDENTIFIER ::= { rnd 44 }
-- Obsolete
-- rll3SwtchETMdl OBJECT IDENTIFIER ::= { rnd 45 }
rlIPmulticast OBJECT IDENTIFIER ::= { rnd 46 }
rlIpmRouterEnable OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The enabled status of IP Multicast routing on this router."
::= { rlIPmulticast 1 }
rlIgmp OBJECT IDENTIFIER ::= { rlIPmulticast 2 }
rlIgmpMibVersion OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"MIB's version, the current version is 1."
::= { rlIgmp 1 }
rlPim OBJECT IDENTIFIER ::= { rlIPmulticast 3 }
rlPimMibVersion OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"MIB's version, the current version is 1."
::= { rlPim 2 }
--
-- pim enable disable
--
rlPimEnable OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The enabled status of PIM protocol on this router."
::= { rlPim 7 }
--
-- rlDvmrp
--
rlDvmrp OBJECT IDENTIFIER ::= { rlIPmulticast 4 }
-- { rlDvmrp 1 } Temporary reserved for dvmrpStdMIB
rlDvmrpMibVersion OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"MIB's version, the current version is 1."
::= { rlDvmrp 2 }
rlDvmrpEnable OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The enabled status of Dvmrp on this router."
::= { rlDvmrp 3 }
rlDvmrpProbeInterval OBJECT-TYPE
SYNTAX INTEGER
-- UNITS "seconds"
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The default interval at which periodic DVMRP Probe
messages are to be sent."
DEFVAL { 10 }
::= { rlDvmrp 4 }
rlDvmrpNeighborTimeOutInterval OBJECT-TYPE
SYNTAX INTEGER (25..400)
-- UNITS "seconds"
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The default interval, if expired the Neighbor need to be
deleted from Interface."
DEFVAL { 35 }
::= { rlDvmrp 5 }
rlDvmrpMinFlashUpdateInterval OBJECT-TYPE
SYNTAX INTEGER
-- UNITS "seconds"
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The min interval at which the DVMRP Fash (Report msg)
messages are to be sent."
DEFVAL { 5 }
::= { rlDvmrp 6 }
rlDvmrpRouteReportInterval OBJECT-TYPE
SYNTAX INTEGER
-- UNITS "seconds"
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The default interval at which periodic DVMRP Report messages are to be sent."
DEFVAL { 60 }
::= { rlDvmrp 7 }
rlDvmrpRouteExpirationTime OBJECT-TYPE
SYNTAX INTEGER
-- UNITS "seconds"
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The default interval at which route expired."
DEFVAL { 140 }
::= { rlDvmrp 8 }
rlDvmrpPruneLifetime OBJECT-TYPE
SYNTAX INTEGER (200..7200)
-- UNITS "seconds"
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The default value of prune interval to be send upstream."
DEFVAL { 200 }
::= { rlDvmrp 9 }
rlDvmrpRouteDesignatedForwarderExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlDvmrpRouteDesignatedForwarderExtEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The (conceptual) table listing the designated forwarder
for each source mask and interface."
::= { rlDvmrp 10}
rlDvmrpRouteDesignatedForwarderExtEntry OBJECT-TYPE
SYNTAX RlDvmrpRouteDesignatedForwarderExtEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry (conceptual row) in the rlDvmrpRouteDesignatedForwarderExtTable.
Specifies the designated forwarder for this source mask and interface."
AUGMENTS { dvmrpRouteNextHopEntry }
::= { rlDvmrpRouteDesignatedForwarderExtTable 1 }
RlDvmrpRouteDesignatedForwarderExtEntry ::= SEQUENCE {
rlDvmrpRouteDesignatedForwarder IpAddress
}
rlDvmrpRouteDesignatedForwarder OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The address of the designated forwarder
for the specific Source Mask and Interface."
::= { rlDvmrpRouteDesignatedForwarderExtEntry 1 }
--
-- rl IGMP PROXY
--
rlIgmpProxy OBJECT IDENTIFIER ::= { rlIPmulticast 5 }
rlIgmpProxyEnable OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The enabled status of IGMP Proxy on this router."
::= { rlIgmpProxy 1 }
--
-- The IGMP Filter
--
rlIgmpFilter OBJECT IDENTIFIER ::= { rlIPmulticast 6 }
rlIgmpFilterEnable OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The enabled status of Igmp filter on this router."
::= { rlIgmpFilter 1 }
rlIgmpFilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlIgmpFilterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The (conceptual) table listing the IP multicast groups which
are permited or denied from the particular interface."
::= { rlIgmpFilter 2 }
rlIgmpFilterEntry OBJECT-TYPE
SYNTAX RlIgmpFilterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry (conceptual row) in the igmpFilterTable."
INDEX { rlIgmpFilterIfIndex, rlIgmpFilterAddressFrom, rlIgmpFilterAddressTo }
::= { rlIgmpFilterTable 1 }
RlIgmpFilterEntry ::= SEQUENCE {
rlIgmpFilterIfIndex InterfaceIndex,
rlIgmpFilterAddressFrom IpAddress,
rlIgmpFilterAddressTo IpAddress,
rlIgmpFilterUpTime TimeTicks,
rlIgmpFilterStatus RowStatus,
rlIgmpFilterAction INTEGER
}
rlIgmpFilterIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The interface for which this entry contains information for
an IP multicast group address."
::= { rlIgmpFilterEntry 1 }
rlIgmpFilterAddressFrom OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The first IP multicast group address for which this entry
contains information."
::= { rlIgmpFilterEntry 2 }
rlIgmpFilterAddressTo OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The last IP multicast group address for which this entry
contains information."
::= { rlIgmpFilterEntry 3 }
rlIgmpFilterUpTime OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The time elapsed since this entry was created."
::= { rlIgmpFilterEntry 4 }
rlIgmpFilterStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The status of this entry."
::= { rlIgmpFilterEntry 5 }
rlIgmpFilterAction OBJECT-TYPE
SYNTAX INTEGER {
deny(1),
permit(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Filter action - permit/deny for the group received
from the interface."
::= { rlIgmpFilterEntry 6 }
--
-- The PIM SM
--
rlPimSM OBJECT IDENTIFIER ::= { rlIPmulticast 7 }
rlPimSMEnable OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The enabled status of PIM SM on this router."
::= { rlPimSM 1 }
rlPimSMMibVersion OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Mib version , current version 2."
::= { rlPimSM 2 }
rlPimSMBootStrapInfoEnable OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The enabled status of PIM SM Boot Strap Info on this router.the router can be configured dynamicly"
::= { rlPimSM 3 }
rlPimSMDREnable OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The enabled status of PIM SM Designated Router on this router."
::= { rlPimSM 4}
rlPimSMDirectedConnectedSourceEnable OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The enabled status of Directed Connected Source on this router.
If disable, the router not work with direct connected sources."
::= { rlPimSM 5}
rlPimSMRPEnable OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The enabled status of PIM SM Randevouz Point on this router."
::= { rlPimSM 6}
rlPimSMSPTSwitchEnable OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The enabled status of PIM SM SPT Switch on this router.
If disable ,the router will work only through the RPT"
::= { rlPimSM 7}
---
--- rlFFT
---
rlFFT OBJECT IDENTIFIER ::= { rnd 47 }
---
--- rlIpFFT
---
rlIpFFT OBJECT IDENTIFIER ::= { rlFFT 1 }
rlIpFftMibVersion OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"MIB's version, the current version is 1."
::= { rlIpFFT 1 }
rlIpMaxFftNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum number of IP FFTs."
::= { rlIpFFT 2 }
rlIpFftDynamicSupported OBJECT-TYPE
SYNTAX INTEGER {
supported (1),
unsupported (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Specifies whether dynamic IP FFTs are supported."
::= { rlIpFFT 3 }
rlIpFftSubnetSupported OBJECT-TYPE
SYNTAX INTEGER {
supported (1),
unsupported (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Specifies whether subtable per IP subnet is supported."
::= { rlIpFFT 4 }
rlIpFftUnknownAddrMsgUsed OBJECT-TYPE
SYNTAX INTEGER {
used (1),
unused (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Specifies whether the 3SW uses the unknown address message."
::= { rlIpFFT 5 }
rlIpFftAgingTimeSupported OBJECT-TYPE
SYNTAX INTEGER {
supported (1),
unsupported (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Specifies whether aging time is supported."
::= { rlIpFFT 6 }
rlIpFftSrcAddrSupported OBJECT-TYPE
SYNTAX INTEGER {
supported (1),
unsupported (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Specifies whether an IP subtable per station contains source IP address."
::= { rlIpFFT 7 }
rlIpFftAgingTimeout OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The aging timeout in seconds."
::= { rlIpFFT 8 }
rlIpFftRedBoundary OBJECT-TYPE
SYNTAX Percents
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The red boundary in percents."
::= { rlIpFFT 9 }
rlIpFftYellowBoundary OBJECT-TYPE
SYNTAX Percents
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The yellow boundary in percents."
::= { rlIpFFT 10 }
--rlIpFftPollingInterval OBJECT-TYPE
-- SYNTAX INTEGER
-- ACCESS read-write
-- STATUS mandatory
-- DESCRIPTION
-- "The polling interval for dynamic IP FFTs support in seconds."
-- ::= { rlIpFFT 11 }
--
-- The IP FFT Number Routers Table
--
rlIpFftNumTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlIpFftNumEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The (conceptual) table containing routes' numbers of
the IP SFFTs and IP NFFTs. "
::= { rlIpFFT 12 }
rlIpFftNumEntry OBJECT-TYPE
SYNTAX RlIpFftNumEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry (conceptual row) containing the containing routes' numbers
of IP SFFT and IP NFFT "
INDEX { rlIpFftNumIndex }
::= { rlIpFftNumTable 1 }
RlIpFftNumEntry ::= SEQUENCE {
rlIpFftNumIndex INTEGER,
rlIpFftNumStnRoutesNumber INTEGER,
rlIpFftNumSubRoutesNumber INTEGER
}
rlIpFftNumIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of the index of the IP FFT. "
::= { rlIpFftNumEntry 1 }
rlIpFftNumStnRoutesNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of routes that are contained in the IP SFFT. "
::= { rlIpFftNumEntry 2 }
rlIpFftNumSubRoutesNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of routes that are contained in the IP NFFT. "
::= { rlIpFftNumEntry 3 }
--
-- The IP Fast Forwarding Table per station
--
rlIpFftStnTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlIpFftStnEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The (conceptual) table contains IP Fast Forwarding information
per station for IP datagrams. "
::= { rlIpFFT 13 }
rlIpFftStnEntry OBJECT-TYPE
SYNTAX RlIpFftStnEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry (conceptual row) contains the IP fast forwarding
information for IP datagrams from a particular source and
destination addresses."
INDEX { rlIpFftStnIndex, rlIpFftStnMrid, rlIpFftStnDstIpAddress }
::= { rlIpFftStnTable 1 }
RlIpFftStnEntry ::= SEQUENCE {
rlIpFftStnIndex INTEGER,
rlIpFftStnMrid INTEGER,
rlIpFftStnDstIpAddress IpAddress,
rlIpFftStnDstRouteIpMask IpAddress,
rlIpFftStnDstIpAddrType INTEGER,
rlIpFftStnDstMacAddress PhysAddress,
rlIpFftStnSrcMacAddress PhysAddress,
rlIpFftStnOutIfIndex INTEGER,
rlIpFftStnVid INTEGER,
rlIpFftStnTaggedMode INTEGER,
rlIpFftStnAge INTEGER
}
rlIpFftStnIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of the index of the IP FFT. "
::= { rlIpFftStnEntry 1 }
rlIpFftStnMrid OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The router's Instance Identifier in the SFFT. "
::= { rlIpFftStnEntry 2 }
rlIpFftStnDstIpAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IP destination address for which this entry
contains IP forwarding information."
::= { rlIpFftStnEntry 3 }
rlIpFftStnDstRouteIpMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IP destination mask for which this entry
contains IP forwarding information."
::= { rlIpFftStnEntry 4 }
rlIpFftStnDstIpAddrType OBJECT-TYPE
SYNTAX INTEGER {
local (1),
remote (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IP destination address type. "
::= { rlIpFftStnEntry 5 }
rlIpFftStnDstMacAddress OBJECT-TYPE
SYNTAX PhysAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The MAC destination address."
::= { rlIpFftStnEntry 6}
rlIpFftStnSrcMacAddress OBJECT-TYPE
SYNTAX PhysAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The MAC source address."
::= { rlIpFftStnEntry 7 }
rlIpFftStnOutIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of ifIndex of output physical port."
::= { rlIpFftStnEntry 8 }
rlIpFftStnVid OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The vid of the output port."
::= { rlIpFftStnEntry 9 }
rlIpFftStnTaggedMode OBJECT-TYPE
SYNTAX INTEGER {
untagged (1),
tagged (2),
basedPortConfig (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The tagged value of the port. When the Tagged field is not
a part of the FFT table in the ASIC,
the Tagged field gets the BasedPortConfig value "
::= { rlIpFftStnEntry 10 }
rlIpFftStnAge OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The age of the entry in seconds from the inserting."
::= { rlIpFftStnEntry 11 }
--
-- The IP Fast Forwarding Table per subnet
--
rlIpFftSubTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlIpFftSubEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The (conceptual) table containing IP Fast Forwarding information
per subnet for IP datagrams. "
::= { rlIpFFT 14 }
rlIpFftSubEntry OBJECT-TYPE
SYNTAX RlIpFftSubEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry (conceptual row) containing the IP fast forwarding
information for IP datagrams from a particular source and
destination addresses."
INDEX { rlIpFftSubMrid , rlIpFftSubDstIpSubnet, rlIpFftSubDstIpMask }
::= { rlIpFftSubTable 1 }
RlIpFftSubEntry ::= SEQUENCE {
rlIpFftSubMrid INTEGER,
rlIpFftSubDstIpSubnet IpAddress,
rlIpFftSubDstIpMask IpAddress,
rlIpFftSubNextHopSetRefCount INTEGER,
rlIpFftSubNextHopCount INTEGER,
rlIpFftSubNextHopIfindex1 INTEGER,
rlIpFftSubNextHopIpAddr1 IpAddress,
rlIpFftSubNextHopIfindex2 INTEGER,
rlIpFftSubNextHopIpAddr2 IpAddress,
rlIpFftSubNextHopIfindex3 INTEGER,
rlIpFftSubNextHopIpAddr3 IpAddress,
rlIpFftSubNextHopIfindex4 INTEGER,
rlIpFftSubNextHopIpAddr4 IpAddress,
rlIpFftSubNextHopIfindex5 INTEGER,
rlIpFftSubNextHopIpAddr5 IpAddress,
rlIpFftSubNextHopIfindex6 INTEGER,
rlIpFftSubNextHopIpAddr6 IpAddress,
rlIpFftSubNextHopIfindex7 INTEGER,
rlIpFftSubNextHopIpAddr7 IpAddress,
rlIpFftSubNextHopIfindex8 INTEGER,
rlIpFftSubNextHopIpAddr8 IpAddress,
rlIpFftSubAge INTEGER
}
rlIpFftSubMrid OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The router's Instance Identifier in the NFFT. "
::= { rlIpFftSubEntry 1 }
rlIpFftSubDstIpSubnet OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IP destination subnet for which this entry
contains IP forwarding information."
::= { rlIpFftSubEntry 2 }
rlIpFftSubDstIpMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IP destination mask for which this entry
contains IP forwarding information."
::= { rlIpFftSubEntry 3 }
rlIpFftSubAge OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The age of the entry in seconds from the inserting."
::= { rlIpFftSubEntry 4 }
rlIpFftSubNextHopSetRefCount OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of NFFT entries that used the given NextHop set (ECMP path). "
::= { rlIpFftSubEntry 5 }
rlIpFftSubNextHopCount OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of used NextHops in the given NextHop set (ECMP path) for the NFFT entry. "
::= { rlIpFftSubEntry 6 }
rlIpFftSubNextHopIfindex1 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The first NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry. "
::= { rlIpFftSubEntry 7 }
rlIpFftSubNextHopIpAddr1 OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The first NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry. "
::= { rlIpFftSubEntry 8 }
rlIpFftSubNextHopIfindex2 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The second NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry. "
::= { rlIpFftSubEntry 9 }
rlIpFftSubNextHopIpAddr2 OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The second NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry. "
::= { rlIpFftSubEntry 10 }
rlIpFftSubNextHopIfindex3 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The third NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry. "
::= { rlIpFftSubEntry 11 }
rlIpFftSubNextHopIpAddr3 OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The third NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry. "
::= { rlIpFftSubEntry 12 }
rlIpFftSubNextHopIfindex4 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The fourth NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry. "
::= { rlIpFftSubEntry 13 }
rlIpFftSubNextHopIpAddr4 OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The fourth NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry. "
::= { rlIpFftSubEntry 14 }
rlIpFftSubNextHopIfindex5 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The fifth NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry. "
::= { rlIpFftSubEntry 15 }
rlIpFftSubNextHopIpAddr5 OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The fifth NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry. "
::= { rlIpFftSubEntry 16 }
rlIpFftSubNextHopIfindex6 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The six NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry. "
::= { rlIpFftSubEntry 17 }
rlIpFftSubNextHopIpAddr6 OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The six NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry. "
::= { rlIpFftSubEntry 18 }
rlIpFftSubNextHopIfindex7 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The seven NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry. "
::= { rlIpFftSubEntry 19 }
rlIpFftSubNextHopIpAddr7 OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The seven NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry. "
::= { rlIpFftSubEntry 20 }
rlIpFftSubNextHopIfindex8 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The eight NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry. "
::= { rlIpFftSubEntry 21 }
rlIpFftSubNextHopIpAddr8 OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The eight NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry. "
::= { rlIpFftSubEntry 22 }
--
-- The IP FFT Counters Table
--
rlIpFftCountersTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlIpFftCountersEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The (conceptual) table containing IP Counters information
per one IP FFT."
::= { rlIpFFT 15 }
rlIpFftCountersEntry OBJECT-TYPE
SYNTAX RlIpFftCountersEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry (conceptual row) containing the IP Counters
information containing amount of IP datagrams passed
by certain IP FFT."
INDEX { rlIpFftCountersIndex }
::= { rlIpFftCountersTable 1 }
RlIpFftCountersEntry ::= SEQUENCE {
rlIpFftCountersIndex INTEGER,
rlIpFftInReceives INTEGER,
rlIpFftForwDatagrams INTEGER,
rlIpFftInDiscards INTEGER
}
rlIpFftCountersIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of the index of the IP FFT."
::= { rlIpFftCountersEntry 1 }
rlIpFftInReceives OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The amount of received IP datagrams "
::= { rlIpFftCountersEntry 2 }
rlIpFftForwDatagrams OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The amount of forwarded IP datagrams "
::= { rlIpFftCountersEntry 3 }
rlIpFftInDiscards OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The amount of discarded IP datagrams "
::= { rlIpFftCountersEntry 4 }
--
-- The IP NextHop Table (used by NFFT and Remote SFFT)
--
rlIpFftNextHopTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlIpFftNextHopEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The (conceptual) table contains NextHop information
used for routing IP datagrams. "
::= { rlIpFFT 16 }
rlIpFftNextHopEntry OBJECT-TYPE
SYNTAX RlIpFftNextHopEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry (conceptual row) contains the NextHop info
information for routing IP datagrams."
INDEX { rlIpFftNextHopifindex, rlIpFftNextHopIpAddress }
::= { rlIpFftNextHopTable 1 }
RlIpFftNextHopEntry ::= SEQUENCE {
rlIpFftNextHopifindex INTEGER,
rlIpFftNextHopIpAddress IpAddress,
rlIpFftNextHopValid INTEGER,
rlIpFftNextHopType INTEGER,
rlIpFftNextHopReferenceCount INTEGER,
rlIpFftNextHopNetAddress PhysAddress,
rlIpFftNextHopVid INTEGER,
rlIpFftNextHopMacAddress PhysAddress,
rlIpFftNextHopOutIfIndex INTEGER
}
rlIpFftNextHopifindex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of the IP Interface index of the NextHop. "
::= { rlIpFftNextHopEntry 1 }
rlIpFftNextHopIpAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IP address of a NextHop for which an entry contains
IP forwarding information. "
::= { rlIpFftNextHopEntry 2 }
rlIpFftNextHopValid OBJECT-TYPE
SYNTAX INTEGER {
valid (1),
invalid (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The NextHop Valid bit. When L2 info is missing,
a NextHop has Invalid value. "
::= { rlIpFftNextHopEntry 3 }
rlIpFftNextHopType OBJECT-TYPE
SYNTAX INTEGER {
local (1),
remote (2),
reject (3),
drop (4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The NextHop type. "
::= { rlIpFftNextHopEntry 4 }
rlIpFftNextHopReferenceCount OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"IF LPM is supported:
If ecmp supported:
the field NextHop_ref_count used to save number
of NextHop SETs that use the NextHop.
Otherwise, NextHop_ref_count used to save number of
NFFT entries that use the NextHop.
IF LPM is NOT supported:
NextHop_ref_count used to save number of
Remote SFFT entries that use the NextHop. "
::= { rlIpFftNextHopEntry 5 }
rlIpFftNextHopNetAddress OBJECT-TYPE
SYNTAX PhysAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The NextHop Physical Address."
::= { rlIpFftNextHopEntry 6 }
rlIpFftNextHopVid OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The vid of the output port."
::= { rlIpFftNextHopEntry 7 }
rlIpFftNextHopMacAddress OBJECT-TYPE
SYNTAX PhysAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The MAC destination address."
::= { rlIpFftNextHopEntry 8}
rlIpFftNextHopOutIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of ifIndex of output physical port."
::= { rlIpFftNextHopEntry 9 }
--
-- The L2 info Table (used by NextHop and Direct SFFT)
--
rlIpFftL2InfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlIpFftL2InfoEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The (conceptual) table contains L2 information
used for routing IP datagrams. "
::= { rlIpFFT 17 }
rlIpFftL2InfoEntry OBJECT-TYPE
SYNTAX RlIpFftL2InfoEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry (conceptual row) contains the L2 info
information for routing IP datagrams."
INDEX { rlIpFftL2InfoIfindex, rlIpFftL2InfoDstMacAddress }
::= { rlIpFftL2InfoTable 1 }
RlIpFftL2InfoEntry ::= SEQUENCE {
rlIpFftL2InfoIfindex INTEGER,
rlIpFftL2InfoDstMacAddress PhysAddress,
rlIpFftL2InfoValid INTEGER,
rlIpFftL2InfoType INTEGER,
rlIpFftL2InfoReferenceCount INTEGER,
rlIpFftL2InfoVid INTEGER,
rlIpFftL2InfoSrcMacAddress PhysAddress,
rlIpFftL2InfoOutIfIndex INTEGER,
rlIpFftL2InfoTaggedMode INTEGER
}
rlIpFftL2InfoIfindex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The VLAN Ifindex of the destination port. "
::= { rlIpFftL2InfoEntry 1 }
rlIpFftL2InfoDstMacAddress OBJECT-TYPE
SYNTAX PhysAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The MAC destination address."
::= { rlIpFftL2InfoEntry 2}
rlIpFftL2InfoValid OBJECT-TYPE
SYNTAX INTEGER {
valid (1),
invalid (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The L2 info entry valid bit. When L2 info is missing some information,
an L2 info has Invalid value. "
::= { rlIpFftL2InfoEntry 3 }
rlIpFftL2InfoType OBJECT-TYPE
SYNTAX INTEGER {
other (1),
vlan (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The L2 info type. With Enthernet media l2 info type is vlan.
WIth Tunneling feature, l2 info type will be expanded. "
::= { rlIpFftL2InfoEntry 4 }
rlIpFftL2InfoReferenceCount OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The reference count contains a number of
NextHop entries that use this L2 info."
::= { rlIpFftL2InfoEntry 5 }
rlIpFftL2InfoVid OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The vid of the destination port. "
::= { rlIpFftL2InfoEntry 6 }
rlIpFftL2InfoSrcMacAddress OBJECT-TYPE
SYNTAX PhysAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The MAC source address placed to Ehernet Header of IP forwarded packet."
::= { rlIpFftL2InfoEntry 7}
rlIpFftL2InfoOutIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of ifIndex of output physical port the packet is forwarded through."
::= { rlIpFftL2InfoEntry 8 }
rlIpFftL2InfoTaggedMode OBJECT-TYPE
SYNTAX INTEGER {
untagged (1),
tagged (2),
basedPortConfig (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The tagged value of the port. When the Tagged field is not
a part of the FFT table in the ASIC,
the Tagged field get the BasedPortConfig value."
::= { rlIpFftL2InfoEntry 9 }
---
--- rlIpxFFT
---
rlIpxFFT OBJECT IDENTIFIER ::= { rlFFT 2 }
rlIpxFftMibVersion OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"MIB's version, the current version is 1."
::= { rlIpxFFT 1 }
rlIpxMaxFftNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximun number of IPX FFTs. An IPX FFT gets a number
from 1 until rlIpxMaxFftSetNumber."
::= { rlIpxFFT 2 }
rlIpxFftDynamicSupported OBJECT-TYPE
SYNTAX INTEGER {
supported (1),
unsupported (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Specifies whether dynamic IPX FFTs are supported."
::= { rlIpxFFT 3 }
rlIpxFftNetworkSupported OBJECT-TYPE
SYNTAX INTEGER {
supported (1),
unsupported (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Specifies whether subtable per IPX network is supported."
::= { rlIpxFFT 4 }
rlIpxFftUnknownAddrMsgUsed OBJECT-TYPE
SYNTAX INTEGER {
used (1),
unused (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Specifies whether the 3SW uses the unknown address message."
::= { rlIpxFFT 5 }
rlIpxFftAgingTimeSupported OBJECT-TYPE
SYNTAX INTEGER {
supported (1),
unsupported (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Specifies whether aging time is supported for subtable per station."
::= { rlIpxFFT 6 }
rlIpxFftSrcAddrSupported OBJECT-TYPE
SYNTAX INTEGER {
supported (1),
unsupported (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Specifies whether an IPX subtable per station contains source
IPX address."
::= { rlIpxFFT 7 }
rlIpxFftAgingTimeout OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The aging timeout in seconds."
::= { rlIpxFFT 8 }
rlIpxFftRedBoundary OBJECT-TYPE
SYNTAX INTEGER (1..100)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The red boundary in percents."
::= { rlIpxFFT 9 }
rlIpxFftYellowBoundary OBJECT-TYPE
SYNTAX Percents
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The yellow boundary in percents."
::= { rlIpxFFT 10 }
--rlIpxFftPollingInterval OBJECT-TYPE
-- SYNTAX INTEGER
-- ACCESS read-write
-- STATUS mandatory
-- DESCRIPTION
-- "The polling interval for dynamic IPX FFTs support in seconds."
-- ::= { rlIpxFFT 11 }
--
-- The IPX FFT Number Routers Table
--
rlIpxFftNumTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlIpxFftNumEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The (conceptual) table containing number routes of
the IPX Fast Forwarding Table. "
::= { rlIpxFFT 12 }
rlIpxFftNumEntry OBJECT-TYPE
SYNTAX RlIpxFftNumEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry (conceptual row) containing the containing number routes of
of IPX SFFT and IPX NFFT "
INDEX { rlIpxFftNumIndex }
::= { rlIpxFftNumTable 1 }
RlIpxFftNumEntry ::= SEQUENCE {
rlIpxFftNumIndex INTEGER,
rlIpxFftNumStnRoutesNumber INTEGER,
rlIpxFftNumSubRoutesNumber INTEGER
}
rlIpxFftNumIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of the index of the IPX FFT. "
::= { rlIpxFftNumEntry 1 }
rlIpxFftNumStnRoutesNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of routes containing in the IPX SFFT. "
::= { rlIpxFftNumEntry 2 }
rlIpxFftNumSubRoutesNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of routes containing in the IPX NFFT. "
::= { rlIpxFftNumEntry 3 }
--
-- The IPX Fast Forwarding Table per station
--
rlIpxFftStnTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlIpxFftStnEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The (conceptual) table containing IPX Fast Forwarding information
per station for IPX. "
::= { rlIpxFFT 13 }
rlIpxFftStnEntry OBJECT-TYPE
SYNTAX RlIpxFftStnEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry (conceptual row) containing the IP fast forwarding
information for IP datagrams from a particular source and
destination addresses."
INDEX { rlIpxFftStnIndex, rlIpxFftStnDstNetid, rlIpxFftStnDstNode,
rlIpxFftStnSrcNetid, rlIpxFftStnSrcNode }
::= { rlIpxFftStnTable 1 }
RlIpxFftStnEntry ::= SEQUENCE {
rlIpxFftStnIndex INTEGER,
rlIpxFftStnDstNetid NetNumber,
rlIpxFftStnDstNode PhysAddress,
rlIpxFftStnSrcNetid NetNumber,
rlIpxFftStnSrcNode PhysAddress,
rlIpxFftStnDstIpxAddrType INTEGER,
rlIpxFftStnEncapsulation INTEGER,
rlIpxFftStnDstMacAddress PhysAddress,
rlIpxFftStnSrcMacAddress PhysAddress,
rlIpxFftStnOutIfIndex INTEGER,
rlIpxFftStnTci INTEGER,
rlIpxFftStnFacsIndex INTEGER,
rlIpxFftStnAge INTEGER
}
rlIpxFftStnIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of the index of the IPX FFT. "
::= { rlIpxFftStnEntry 1 }
rlIpxFftStnDstNetid OBJECT-TYPE
SYNTAX NetNumber
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The destination network for which this entry
contains IPX forwarding information."
::= { rlIpxFftStnEntry 2 }
rlIpxFftStnDstNode OBJECT-TYPE
SYNTAX PhysAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The destination node for which this entry
contains IPX forwarding information."
::= { rlIpxFftStnEntry 3 }
rlIpxFftStnSrcNetid OBJECT-TYPE
SYNTAX NetNumber
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The source network for which this entry
contains IPX forwarding information."
::= { rlIpxFftStnEntry 4 }
rlIpxFftStnSrcNode OBJECT-TYPE
SYNTAX PhysAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The destination node for which this entry
contains IPX forwarding information."
::= { rlIpxFftStnEntry 5 }
rlIpxFftStnDstIpxAddrType OBJECT-TYPE
SYNTAX INTEGER {
local (1),
remote (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The destination address type. "
::= { rlIpxFftStnEntry 6 }
rlIpxFftStnEncapsulation OBJECT-TYPE
SYNTAX INTEGER {
novell(1),
ethernet(2),
llc(3),
snap(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The encapsulation method associated with this route."
::= { rlIpxFftStnEntry 7 }
rlIpxFftStnDstMacAddress OBJECT-TYPE
SYNTAX PhysAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The MAC destination address."
::= { rlIpxFftStnEntry 8 }
rlIpxFftStnSrcMacAddress OBJECT-TYPE
SYNTAX PhysAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The MAC source address."
::= { rlIpxFftStnEntry 9 }
rlIpxFftStnOutIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of ifIndex of output physical port."
::= { rlIpxFftStnEntry 10 }
rlIpxFftStnTci OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of TCI or 0."
::= { rlIpxFftStnEntry 11 }
rlIpxFftStnFacsIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of index of the FACS Table."
::= { rlIpxFftStnEntry 12 }
rlIpxFftStnAge OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The age of the entry in seconds."
::= { rlIpxFftStnEntry 13 }
--
-- The IPX Fast Forwarding Table per network
--
rlIpxFftSubTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlIpxFftSubEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The (conceptual) table containing IPX Fast Forwarding information
per network for IPX . "
::= { rlIpxFFT 14 }
rlIpxFftSubEntry OBJECT-TYPE
SYNTAX RlIpxFftSubEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry (conceptual row) containing the IP fast forwarding
information for IP datagrams from a particular source and
destination addresses."
INDEX { rlIpxFftSubIndex, rlIpxFftSubDstNetid }
::= { rlIpxFftSubTable 1 }
RlIpxFftSubEntry ::= SEQUENCE {
rlIpxFftSubIndex INTEGER,
rlIpxFftSubDstNetid NetNumber,
rlIpxFftSubEncapsulation INTEGER,
rlIpxFftSubDstMacAddress PhysAddress,
rlIpxFftSubSrcMacAddress PhysAddress,
rlIpxFftSubOutIfIndex INTEGER,
rlIpxFftSubTci INTEGER,
rlIpxFftSubFacsIndex INTEGER,
rlIpxFftSubAge INTEGER
}
rlIpxFftSubIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of the index of the IPX FFT. "
::= { rlIpxFftSubEntry 1 }
rlIpxFftSubDstNetid OBJECT-TYPE
SYNTAX NetNumber
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The destination network for which this entry
contains IPX forwarding information."
::= { rlIpxFftSubEntry 2 }
rlIpxFftSubEncapsulation OBJECT-TYPE
SYNTAX INTEGER {
novell(1),
ethernet(2),
llc(3),
snap(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The encapsulation method associated with this route."
::= { rlIpxFftSubEntry 3 }
rlIpxFftSubDstMacAddress OBJECT-TYPE
SYNTAX PhysAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The MAC destination address."
::= { rlIpxFftSubEntry 4 }
rlIpxFftSubSrcMacAddress OBJECT-TYPE
SYNTAX PhysAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The MAC source address."
::= { rlIpxFftSubEntry 5 }
rlIpxFftSubOutIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of ifIndex of output physical port."
::= { rlIpxFftSubEntry 6 }
rlIpxFftSubTci OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of TCI or 0."
::= { rlIpxFftSubEntry 7 }
rlIpxFftSubFacsIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of index of the FACS Table."
::= { rlIpxFftSubEntry 8 }
rlIpxFftSubAge OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The age of the entry in seconds."
::= { rlIpxFftSubEntry 9 }
--
-- The IPX FFT Counters Table
--
rlIpxFftCountersTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlIpxFftCountersEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The (conceptual) table containing IPX Counters information
per one IPX FFT."
::= { rlIpxFFT 15 }
rlIpxFftCountersEntry OBJECT-TYPE
SYNTAX RlIpxFftCountersEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry (conceptual row) containing the IP Counters
information containing amount of IPX datagrams passed
by certain IPX FFT."
INDEX { rlIpxFftCountersIndex }
::= { rlIpxFftCountersTable 1 }
RlIpxFftCountersEntry ::= SEQUENCE {
rlIpxFftCountersIndex INTEGER,
rlIpxFftInReceives INTEGER,
rlIpxFftForwDatagrams INTEGER,
rlIpxFftInDiscards INTEGER
}
rlIpxFftCountersIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of the index of the IPX FFT."
::= { rlIpxFftCountersEntry 1 }
rlIpxFftInReceives OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The amount of received IPX datagrams "
::= { rlIpxFftCountersEntry 2 }
rlIpxFftForwDatagrams OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The amount of forwarded IPX datagrams "
::= { rlIpxFftCountersEntry 3 }
rlIpxFftInDiscards OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The amount of discarded IPX datagrams "
::= { rlIpxFftCountersEntry 4 }
---
--- rlIpmFFT
---
rlIpmFFT OBJECT IDENTIFIER ::= { rlFFT 3 }
rlIpmFftMibVersion OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"MIB's version, the current version is 1."
::= { rlIpmFFT 1 }
rlIpmMaxFftNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximun number of IPM FFTs. NT_IPM gets a number
from Host Parameters"
::= { rlIpmFFT 2 }
rlIpmFftDynamicSupported OBJECT-TYPE
SYNTAX INTEGER {
supported (1),
unsupported (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Specifies whether dynamic IPM FFTs are supported.
An NT_IPM gets a number from Host Parameters"
::= { rlIpmFFT 3 }
rlIpmFftUnknownAddrMsgUsed OBJECT-TYPE
SYNTAX INTEGER {
used (1),
unused (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Specifies whether the 3SW uses the unknown address message.
An NT_IPM gets a number from Host Parameters"
::= { rlIpmFFT 4 }
rlIpmFftUserAgingTimeout OBJECT-TYPE
SYNTAX Unsigned-32
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The aging timeout in seconds. SNMP user writes.
There is a default value of aging timeout."
::= { rlIpmFFT 5 }
rlIpmFftRouterAgingTimeout OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The aging timeout in seconds. NT_IPM keeps value that
Router level gave. This is high priority value for aging timeout."
::= { rlIpmFFT 6 }
--rlIpmFftPollingInterval OBJECT-TYPE
-- SYNTAX INTEGER
-- ACCESS read-only
-- STATUS mandatory
-- DESCRIPTION
-- "The polling interval for dynamic IPM FFT's support in seconds."
-- ::= { rlIpmFFT 7 }
--
-- The IPM FFT Number Routers Table
--
rlIpmFftNumTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlIpmFftNumEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The (conceptual) table containing number routes of
the IPM Fast Forwarding Table. "
::= { rlIpmFFT 8 }
rlIpmFftNumEntry OBJECT-TYPE
SYNTAX RlIpmFftNumEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry (conceptual row) containing the containing number routes of
an IPM FFT."
INDEX { rlIpmFftNumIndex }
::= { rlIpmFftNumTable 1 }
RlIpmFftNumEntry ::= SEQUENCE {
rlIpmFftNumIndex INTEGER,
rlIpmFftNumRoutesNumber INTEGER
}
rlIpmFftNumIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of the index of the IPM FFT."
::= { rlIpmFftNumEntry 1 }
rlIpmFftNumRoutesNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of routes containing in the IPM FFT."
::= { rlIpmFftNumEntry 2 }
--
-- The IPM Fast Forwarding Table
--
rlIpmFftTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlIpmFftEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The (conceptual) table containing IPM Fast Forwarding information
for IPM datagrams."
::= { rlIpmFFT 9 }
rlIpmFftEntry OBJECT-TYPE
SYNTAX RlIpmFftEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry (conceptual row) containing the IPM fast forwarding
information for IP datagrams from a particular source and
destination addresses."
INDEX { rlIpmFftIndex, rlIpmFftSrcIpAddress, rlIpmFftDstIpAddress }
::= { rlIpmFftTable 1 }
RlIpmFftEntry ::= SEQUENCE {
rlIpmFftIndex INTEGER,
rlIpmFftSrcIpAddress IpAddress,
rlIpmFftDstIpAddress IpAddress,
rlIpmFftSrcIpMask IpAddress,
rlIpmFftInputIfIndex INTEGER,
rlIpmFftInputVlanTag INTEGER,
rlIpmFftForwardAction INTEGER,
rlIpmFftInportAction INTEGER,
rlIpmFftAge INTEGER
}
rlIpmFftIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of the index of the IPM FFT. "
::= { rlIpmFftEntry 1 }
rlIpmFftSrcIpAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IP source address for which this entry
contains IPM forwarding information."
::= { rlIpmFftEntry 2 }
rlIpmFftDstIpAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IPM destination address for which this entry
contains IPM forwarding information."
::= { rlIpmFftEntry 3 }
rlIpmFftSrcIpMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IP source mask for which this entry
contains IP forwarding information."
::= { rlIpmFftEntry 4 }
rlIpmFftInputIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The input ifIndex for which this entry
contains IPM forwarding information."
::= { rlIpmFftEntry 5 }
rlIpmFftInputVlanTag OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The input Vlan tag together with input ifIndex defines
pair (ifIndex, tag)"
::= { rlIpmFftEntry 6 }
rlIpmFftForwardAction OBJECT-TYPE
SYNTAX INTEGER {
forward(1),
discard (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IPM forward action."
::= { rlIpmFftEntry 7 }
rlIpmFftInportAction OBJECT-TYPE
SYNTAX INTEGER {
sentToCPU(1),
discard (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IPM illegal input port action."
::= { rlIpmFftEntry 8 }
rlIpmFftAge OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The age of the entry in seconds from the moment of inserting. "
::= { rlIpmFftEntry 9 }
--
-- The IPM FFT Output Port and Tag Table
--
rlIpmFftPortTagTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlIpmFftPortTagEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The (conceptual) table containing IPM FFT output port tag information
for IPM datagrams."
::= { rlIpmFFT 10 }
rlIpmFftPortTagEntry OBJECT-TYPE
SYNTAX RlIpmFftPortTagEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry (conceptual row) containing the IPM FFT output port tag
information for IP datagrams from a particular source and
destination addresses."
INDEX { rlIpmFftPortIndex, rlIpmFftPortSrcIpAddress,
rlIpmFftPortDstIpAddress, rlIpmFftPortOutputifIndex,
rlIpmFftPortOutputTag }
::= { rlIpmFftPortTagTable 1 }
RlIpmFftPortTagEntry ::= SEQUENCE {
rlIpmFftPortIndex INTEGER,
rlIpmFftPortSrcIpAddress IpAddress,
rlIpmFftPortDstIpAddress IpAddress,
rlIpmFftPortOutputifIndex INTEGER,
rlIpmFftPortOutputTag INTEGER
}
rlIpmFftPortIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of the index of the IPM FFT. "
::= { rlIpmFftPortTagEntry 1 }
rlIpmFftPortSrcIpAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IP source address for which this entry
contains IPM output port tag information."
::= { rlIpmFftPortTagEntry 2 }
rlIpmFftPortDstIpAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IPM destination address for which this entry
contains IPM port tag information."
::= { rlIpmFftPortTagEntry 3 }
rlIpmFftPortOutputifIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The output ifIndex "
::= { rlIpmFftPortTagEntry 4 }
rlIpmFftPortOutputTag OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The output Vlan tag together with output ifIndex defines
pair (ifIndex, tag)"
::= { rlIpmFftPortTagEntry 5 }
--
-- The IPM FFT Counters Table
--
rlIpmFftCountersTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlIpmFftCountersEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The (conceptual) table containing IPM Counters information
per FFT number. "
::= { rlIpmFFT 11 }
rlIpmFftCountersEntry OBJECT-TYPE
SYNTAX RlIpmFftCountersEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry (conceptual row) containing the IPM Counters
information containing amount of IPM datagrams passed by certain FFT."
INDEX { rlIpmFftCountersIndex }
::= { rlIpmFftCountersTable 1 }
RlIpmFftCountersEntry ::= SEQUENCE {
rlIpmFftCountersIndex INTEGER,
rlIpmFftInReceives INTEGER,
rlIpmFftForwDatagrams INTEGER,
rlIpmFftInDiscards INTEGER
}
rlIpmFftCountersIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of the index of the IPM FFT. "
::= { rlIpmFftCountersEntry 1 }
rlIpmFftInReceives OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The amount of received IPM datagrams "
::= { rlIpmFftCountersEntry 2 }
rlIpmFftForwDatagrams OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The amount of forwarded IPM datagrams "
::= { rlIpmFftCountersEntry 3 }
rlIpmFftInDiscards OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The amount of discarded IPM datagrams "
::= { rlIpmFftCountersEntry 4 }
vlan OBJECT IDENTIFIER ::= { rnd 48 }
vlanMibVersion OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"MIB's version, the current version is 4:
Version 2: the current VLAN MIB replaced the previous one;
Version 3: field vlanPortForbiddenEgressPort was added.
Version 4: dot1q and dot1v supported"
::= { vlan 1 }
vlanMaxTableNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Maximum number of VLAN Tables supported by the device."
::= { vlan 2 }
vlanNameTable OBJECT-TYPE
SYNTAX SEQUENCE OF VlanNameEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table translates Vlan name to Vlan's tag and ifindex"
::= { vlan 21 }
vlanNameEntry OBJECT-TYPE
SYNTAX VlanNameEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The row definition for this table."
INDEX { vlanNameName }
::= { vlanNameTable 1 }
VlanNameEntry ::= SEQUENCE {
vlanNameName DisplayString,
vlanNameTag INTEGER,
vlanNameIfIndex INTEGER
}
vlanNameName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Vlan's name"
::= { vlanNameEntry 1 }
vlanNameTag OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Vlan's tag"
::= { vlanNameEntry 2 }
vlanNameIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Vlan's ifindex"
::= { vlanNameEntry 3 }
vlanPortModeTable OBJECT-TYPE
SYNTAX SEQUENCE OF VlanPortModeEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table hold information on port status trunk or access"
::= { vlan 22 }
vlanPortModeEntry OBJECT-TYPE
SYNTAX VlanPortModeEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The row definition for this table."
INDEX { ifIndex }
::= { vlanPortModeTable 1 }
VlanPortModeEntry ::= SEQUENCE {
vlanPortModeState INTEGER
}
vlanPortModeState OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The port state, 1 is generic cli"
::= { vlanPortModeEntry 1 }
vlanSendUnknownToAllPorts OBJECT-TYPE
SYNTAX TruthValue
ACCESS read-write
STATUS mandatory
DESCRIPTION
"If a value of the parameter is true a frame with unknown
destination MAC address sent by the Layer 3 to a VLAN will be
sent to all ports of the VLAN.
If a value of the parameter is false a frame with unknown
destination MAC address sent by the Layer 3 to a VLAN will be
discarded."
DEFVAL { true }
::= { vlan 27 }
vlanDefaultSupported OBJECT-TYPE
SYNTAX TruthValue
ACCESS read-only
STATUS mandatory
DESCRIPTION
"supported or not default vlan."
::= { vlan 29 }
vlanDot1vSupported OBJECT-TYPE
SYNTAX TruthValue
ACCESS read-only
STATUS mandatory
DESCRIPTION
"802.1v standard for vlan per port and protocol."
::= { vlan 31 }
vlanDefaultEnabled OBJECT-TYPE
SYNTAX TruthValue
ACCESS read-write
STATUS mandatory
DESCRIPTION
"if supported default vlan , indicate enabled or disabled"
::= { vlan 32 }
rlRmonControl OBJECT IDENTIFIER ::= { rnd 49}
rlRmonControlMibVersion OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The MIB's version. The current version is 1"
::= {rlRmonControl 1}
rlRmonControlHistoryControlQuotaBucket OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Maximum number of buckets to be used by each
History Control group entry.
changed to read only, value is derived from
rsMaxRmonEtherHistoryEntrie"
DEFVAL { 8 }
::= {rlRmonControl 2}
rlRmonControlHistoryControlMaxGlobalBuckets OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Maximum number of buckets to be used by all
History Control group entries together."
DEFVAL { 300 }
::= {rlRmonControl 3}
rlHistoryControlTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlHistoryControlEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of rlHistory control entries. This table is exactly like the
corresponding RMON I History control group table, but is used to sample
statistics of counters not specified by the RMON I statistics group."
::= {rlRmonControl 4}
rlHistoryControlEntry OBJECT-TYPE
SYNTAX RlHistoryControlEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of parameters that set up a periodic sampling
of statistics. As an example, an instance of the
rlHistoryControlInterval object might be named
rlHistoryControlInterval.2"
INDEX { rlHistoryControlIndex }
::= { rlHistoryControlTable 1 }
RlHistoryControlEntry ::= SEQUENCE {
rlHistoryControlIndex INTEGER (1..65535),
rlHistoryControlDataSource OBJECT IDENTIFIER,
rlHistoryControlBucketsRequested INTEGER (1..65535),
rlHistoryControlBucketsGranted INTEGER (1..65535),
rlHistoryControlInterval INTEGER (1..3600),
rlHistoryControlOwner OwnerString,
rlHistoryControlStatus EntryStatus
}
rlHistoryControlIndex OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An index that uniquely identifies an entry in the
rlHistoryControl table. Each such entry defines a
set of samples at a particular interval for a sampled counter."
::= { rlHistoryControlEntry 1 }
rlHistoryControlDataSource OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object identifies the source of the data for
which historical data was collected and
placed in the rlHistory table.
This object may not be modified if the associated
rlHistoryControlStatus object is equal to valid(1)."
::= { rlHistoryControlEntry 2 }
rlHistoryControlBucketsRequested OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The requested number of discrete time intervals
over which data is to be saved in the part of the
rlHistory table associated with this rlHistoryControlEntry.
When this object is created or modified, the probe
should set rlHistoryControlBucketsGranted as closely to
this object as is possible for the particular probe
implementation and available resources."
DEFVAL { 50 }
::= { rlHistoryControlEntry 3 }
rlHistoryControlBucketsGranted OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of discrete sampling intervals
over which data shall be saved in the part of
the rlHistory table associated with this
rlHistoryControlEntry.
When the associated rlHistoryControlBucketsRequested
object is created or modified, the probe
should set this object as closely to the requested
value as is possible for the particular
probe implementation and available resources. The
probe must not lower this value except as a result
of a modification to the associated
rlHistoryControlBucketsRequested object.
There will be times when the actual number of
buckets associated with this entry is less than
the value of this object. In this case, at the
end of each sampling interval, a new bucket will
be added to the rlHistory table.
When the number of buckets reaches the value of
this object and a new bucket is to be added to the
media-specific table, the oldest bucket associated
with this rlHistoryControlEntry shall be deleted by
the agent so that the new bucket can be added.
When the value of this object changes to a value less
than the current value, entries are deleted
from the rlHistory table. Enough of the oldest of these
entries shall be deleted by the agent so that their
number remains less than or equal to the new value of
this object.
When the value of this object changes to a value
greater than the current value, the number of
associated rlHistory table entries may be allowed to
grow."
::= { rlHistoryControlEntry 4 }
rlHistoryControlInterval OBJECT-TYPE
SYNTAX INTEGER (1..3600)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The interval in seconds over which the data is
sampled for each bucket in the part of the
rlHistory table associated with this
rlHistoryControlEntry. This interval can
be set to any number of seconds between 1 and
3600 (1 hour).
Because the counters in a bucket may overflow at their
maximum value with no indication, a prudent manager
will take into account the possibility of overflow
in any of the associated counters. It is important
to consider the minimum time in which any counter
could overflow and set the rlHistoryControlInterval object to a value
This object may not be modified if the associated
rlHistoryControlStatus object is equal to valid(1)."
DEFVAL { 1800 }
::= { rlHistoryControlEntry 5 }
rlHistoryControlOwner OBJECT-TYPE
SYNTAX OwnerString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The entity that configured this entry and is
therefore using the resources assigned to it."
::= { rlHistoryControlEntry 6 }
rlHistoryControlStatus OBJECT-TYPE
SYNTAX EntryStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The status of this rlHistoryControl entry.
Each instance of the rlHistory table associated
with this rlHistoryControlEntry will be deleted by the
agent if this rlHistoryControlEntry is not equal to
valid(1)."
::= { rlHistoryControlEntry 7 }
rlHistoryTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlHistoryEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of history entries."
::= { rlRmonControl 5 }
rlHistoryEntry OBJECT-TYPE
SYNTAX RlHistoryEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An historical statistics sample of a counter specified
by the corresponding history control entry.
This sample is associated with the rlHistoryControlEntry which set up
the parameters for a regular collection of these
samples. As an example, an instance of the
rlHistoryPkts object might be named
rlHistoryPkts.2.89"
INDEX { rlHistoryIndex , rlHistorySampleIndex }
::= { rlHistoryTable 1 }
RlHistoryEntry ::= SEQUENCE {
rlHistoryIndex INTEGER (1..65535),
rlHistorySampleIndex INTEGER (1..2147483647),
rlHistoryIntervalStart TimeTicks,
rlHistoryValue Counter
}
rlHistoryIndex OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The history of which this entry is a part. The
history identified by a particular value of this
index is the same history as identified
by the same value of rlHistoryControlIndex."
::= { rlHistoryEntry 1 }
rlHistorySampleIndex OBJECT-TYPE
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An index that uniquely identifies the particular
sample this entry represents among all samples
associated with the same rlHistoryControlEntry.
This index starts at 1 and increases by one
as each new sample is taken."
::= { rlHistoryEntry 2 }
rlHistoryIntervalStart OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of sysUpTime at the start of the interval
over which this sample was measured. If the probe
keeps track of the time of day, it should start
the first sample of the history at a time such that
when the next hour of the day begins, a sample is
started at that instant. Note that following this
rule may require the probe to delay collecting the
first sample of the history, as each sample must be
of the same interval. Also note that the sample which
is currently being collected is not accessible in this
table until the end of its interval."
::= { rlHistoryEntry 3 }
rlHistoryValue OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of the sampled counter at the time of this sampling."
::= { rlHistoryEntry 4 }
rlControlHistoryControlQuotaBucket OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Maximum number of buckets to be used by each rlHistoryControlTable
entry."
DEFVAL { 8 }
::= {rlRmonControl 6}
rlControlHistoryControlMaxGlobalBuckets OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Maximum number of buckets to be used by all
rlHistoryControlTable entries together."
DEFVAL { 300 }
::= {rlRmonControl 7}
rlControlHistoryMaxEntries OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Maximum number of rlHistoryTable entries."
DEFVAL { 300 }
::= {rlRmonControl 8}
rlBrgMacSwitch OBJECT IDENTIFIER ::= { rnd 50 }
rlBrgMacSwVersion OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"MIB's version, the current version is 2."
::= { rlBrgMacSwitch 1 }
rlBrgMacSwMaxTableNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Maximum number of MAC Tables supported by the device."
::= { rlBrgMacSwitch 2 }
rlBrgMacSwDynamicTables OBJECT-TYPE
SYNTAX INTEGER {
supported (1),
unsupported (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Specifies whether the device supports port dynamic MAC tables."
::= { rlBrgMacSwitch 3 }
--rlBrgMacSwTblPollingTimeout OBJECT-TYPE
-- SYNTAX INTEGER
-- ACCESS read-write
-- STATUS mandatory
-- DESCRIPTION
-- "The units of this MIB object is seconds."
-- ::= { rlBrgMacSwitch 4 }
rlBrgMacSwOldEntryDeleteMode OBJECT-TYPE
SYNTAX INTEGER {
refreshFlag (1),
agingFlag(2),
agingTime(3),
boundaries(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The method used to delete old unused entries
refresh_flag:
The high level sets a flag when it adds or updates an entry,
the Switch clears the flag each time, when it learns the
station once more.
aging_flag:
The high level clears a flag when it adds or updates an entry,
the Switch sets the flag each time, when it learns the station
once more.
aging_time:
The high level defines a timeout, the Switch sends a message
to the high level each time when the station doesn't send
messages during interval between timeout and 2*timeout.
Boundaries:
The Switch doesn't support any mechanism, and the high level
uses two boundaries: red and yellow. When the number of entries
exceeds the red boundary, the high level deletes the oldest entries."
::= { rlBrgMacSwitch 5 }
rlBrgMacSwSpanningTree OBJECT-TYPE
SYNTAX INTEGER {
supported (1),
unsupported (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Specifies whether the device supports port the Spanning Tree Protocol."
::= { rlBrgMacSwitch 6 }
rlBrgMacSwKeyType OBJECT-TYPE
SYNTAX INTEGER {
macOnly (1),
tagAndMac(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Specified the used MAC Address Table kye format:
macOnly:
One global MAC Address Table per device (leaky VLANs).
tagAndMac:
MAC Address Table per each VLAN (strick VLANs)."
::= { rlBrgMacSwitch 7 }
rlBrgMacSwYellowBoundary OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The yellow boundary."
::= { rlBrgMacSwitch 8 }
rlBrgMacSwRedBoundary OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The yellow boundary."
::= { rlBrgMacSwitch 9 }
rlBrgMacSwTrapEnable OBJECT-TYPE
SYNTAX TruthValue
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable indicates whether to create a SNMP trap
if adding dynamic mac failed due to full hash chain."
DEFVAL { false }
::= { rlBrgMacSwitch 10 }
rlBrgMacSwOperTrapCount OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable indicates the trap counter status
(i.e. number of received MAC addresses since the last trap
sent that haven't been inserted into the hash).
It is relevant only when trap is enabled."
::= { rlBrgMacSwitch 11 }
rlBrgMacSwAdminTrapFrequency OBJECT-TYPE
SYNTAX INTEGER (1 .. 86400)
-- UNITS "seconds"
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable indicates the minimal frequency (in seconds)
of sending a trap.
It is relevant only when trap is enabled."
DEFVAL { 60 }
::= { rlBrgMacSwitch 12 }
rlExperience OBJECT IDENTIFIER ::= { rnd 51 }
-- Used for Drafts not received yet OBJECT IDENTIFIER
rlCli OBJECT IDENTIFIER ::= { rnd 52 }
rlCliMibVersion OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"MIB's version, the current version is 1."
::= { rlCli 1 }
rlCliPassword OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..20))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"CLI Password"
::= { rlCli 2 }
rlCliTimer OBJECT-TYPE
SYNTAX INTEGER (5..3600)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"CLI Timer"
::= { rlCli 3 }
rlCliFileEnable OBJECT-TYPE
SYNTAX TruthValue
ACCESS read-only
STATUS mandatory
DESCRIPTION
"CLI File Enable/Disable"
::= { rlCli 4 }
rlCliFileEnableAfterReset OBJECT-TYPE
SYNTAX TruthValue
ACCESS read-write
STATUS mandatory
DESCRIPTION
"CLI File Enable/Disable After Reset"
::= { rlCli 5 }
rlPhysicalDescription OBJECT IDENTIFIER ::= { rnd 53 }
rlPhDMibVersion OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"MIB's version, the current version is 2."
::= { rlPhysicalDescription 1 }
rlPhDModuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlPhDModuleEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"For each module (board) there is an entry describing it in this
module"
::= { rlPhysicalDescription 2 }
rlPhDModuleEntry OBJECT-TYPE
SYNTAX RlPhDModuleEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A entry of this table specifies a module (board)"
INDEX { rlPhDModuleStackUnit, rlPhDModuleIndex}
::= { rlPhDModuleTable 1 }
RlPhDModuleEntry ::= SEQUENCE {
rlPhDModuleStackUnit INTEGER,
rlPhDModuleIndex INTEGER,
rlPhDModuleType INTEGER,
rlPhDModuleStartingPort INTEGER,
rlPhDModuleNumberOfPorts INTEGER,
rlPhDModuleRow INTEGER,
rlPhDModuleColumn INTEGER
}
rlPhDModuleStackUnit OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The stack unit to which this module belongs."
::= { rlPhDModuleEntry 1 }
rlPhDModuleIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of the module in its stack unit"
::= { rlPhDModuleEntry 2 }
rlPhDModuleType OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The module type:
1 - unknown
2 - extension
3 - acceleratorOpal
4 - acceleratorHertz3
5 - acceleratorUhual3
6 - hertz2
7 - uhual2
8 - hertz3
9 - uhual3ge
10 - uhual3sonet
11 - uhual3atm
12 - bcm2402
13 - lg8-0
14 - lg16-0
15 - lg8-1
16 - hertz2plus
17 - uhual2plus
18 - 2 98MX620
19 - 2 98EX120
20 - 1 98EX110
21 - two herz3 copper
22 - two uhaul3 fiber SX
23 - two uhaul3 copper
24 - hertz3 fiber
25 - two uhaul3 gibic
26 - two herz3 fiber
27 - two uhaul3 fiber LX
28 - bcm5615 stackable 24
29 - bcm5625x2 stackable 48
30 - EX125D-24 Giga ports
31 - EX115D-48 Fast 4 Giga
32 - SICC 4 copper ports
33 - SICC 4 fiber ports
34 - SICC gbic ports
35 - VesuvioT
35 - VesuvioF"
::= { rlPhDModuleEntry 3 }
rlPhDModuleStartingPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The minimal number of the port residing on this module."
::= { rlPhDModuleEntry 4 }
rlPhDModuleNumberOfPorts OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of ports residing on this module."
::= { rlPhDModuleEntry 5}
rlPhDModuleRow OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"On which row (the uppermost being numbered 1 and the highest row
number asigned to the lowest row) this module resides within the
chassis of its stack unit."
::= { rlPhDModuleEntry 6 }
rlPhDModuleColumn OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"On which column (the leftmost being numbered 1 and the highest column
number asigned to the rightmost column) this module resides within the
chassis of its stack unit."
::= { rlPhDModuleEntry 7 }
rlPhDPortsTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlPhDPortsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Lists the physical or physical-related attributes of ports"
::= { rlPhysicalDescription 3 }
rlPhDPortsEntry OBJECT-TYPE
SYNTAX RlPhDPortsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"For each port, a entry describing attributes which are either
physical or are derived from the features of the device hardware"
INDEX { rlPhDPortsIfIndex }
::= { rlPhDPortsTable 1 }
RlPhDPortsEntry ::= SEQUENCE {
rlPhDPortsIfIndex INTEGER,
rlPhDPortsIfIndexName DisplayString(SIZE(1..20)),
rlPhDPortsMediaType INTEGER,
rlPhDPortsStackUnit INTEGER,
rlPhDPortsModuleNumber INTEGER,
rlPhDPortsRow INTEGER,
rlPhDPortsColumn INTEGER,
rlPhDConnectorType JackType,
rlPhDPortHaul INTEGER
}
rlPhDPortsIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The L2 interface number associated with this port."
::= { rlPhDPortsEntry 1 }
rlPhDPortsIfIndexName OBJECT-TYPE
SYNTAX DisplayString(SIZE(1..20))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The L2 interface number associated with this port, in string format
based on the overall hardware architecture of the device (i.e., for
monolithic devices just numbers, devices composed of modules (boards,
cards) or stackable devices composed of monolithic units in form
<module /stack unit number> - <port number on current module /stack
unit number>, stackable devices in which each unit is composed of
modules
<stack unit number> - <module number> - <port number>"
::= { rlPhDPortsEntry 2 }
rlPhDPortsMediaType OBJECT-TYPE
SYNTAX INTEGER {copper(1), optic-fiber(2), combo(3)}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The media type of this port."
::= { rlPhDPortsEntry 3 }
rlPhDPortsStackUnit OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of the stack unit to which this port belongs."
::= { rlPhDPortsEntry 4 }
rlPhDPortsModuleNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of the module to which this port belongs."
::= { rlPhDPortsEntry 5 }
rlPhDPortsRow OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"On which row (the uppermost being numbered 1 and the highest row
number asigned to the lowest row) this port resides within its
module."
::= { rlPhDPortsEntry 6 }
rlPhDPortsColumn OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"On which column (the leftmost being numbered 1 and the highest column
number asigned to the rightmost column) this this port resides within its
module."
::= { rlPhDPortsEntry 7 }
rlPhDConnectorType OBJECT-TYPE
SYNTAX JackType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Type of connector."
::= { rlPhDPortsEntry 8 }
rlPhDPortHaul OBJECT-TYPE
SYNTAX INTEGER {
not-relevant(1),
short(2),
long(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Distance supported by this port."
::= { rlPhDPortsEntry 9 }
rlPhDStackTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlPhDStackEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"For each stack unit there is an entry describing it in this table"
::= { rlPhysicalDescription 4 }
rlPhDStackEntry OBJECT-TYPE
SYNTAX RlPhDStackEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A entry of this table specifies a stack unit"
INDEX { rlPhdStackUnit }
::= { rlPhDStackTable 1 }
RlPhDStackEntry ::= SEQUENCE {
rlPhdStackUnit INTEGER,
rlPhdStackType INTEGER
}
rlPhdStackUnit OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The stack unit described by this entry."
::= { rlPhDStackEntry 1 }
rlPhdStackType OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type of the stack unit described by this entry:
1 - box 3202
2 - box LG
3 - bcm
4 - prestera"
::= { rlPhDStackEntry 2 }
rlPhDModuleHotSwapTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlPhDModuleHotSwapEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"For each module (board) there is an entry describing its Hot Swap
status"
::= { rlPhysicalDescription 5 }
rlPhDModuleHotSwapEntry OBJECT-TYPE
SYNTAX RlPhDModuleHotSwapEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A entry of this table specifies a module (board) Hot Swap
status"
INDEX { rlPhDModuleStackUnit, rlPhDModuleIndex}
::= { rlPhDModuleHotSwapTable 1 }
RlPhDModuleHotSwapEntry ::= SEQUENCE {
rlPhDModuleHotSwapAdminStatus INTEGER,
rlPhDModuleHotSwapOperStatus INTEGER
}
rlPhDModuleHotSwapAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The desired state of the module. The off(1) state indicates
that the module is not used and its rlPhDModuleHotSwapOperStatus
is always off(2).
The on{1) state indicates that the module may be used and its
rlPhDModuleHotSwapOperStatus will be on(1) if it presents and
off(2) if it does not present."
DEFVAL { on }
::= { rlPhDModuleHotSwapEntry 1 }
rlPhDModuleHotSwapOperStatus OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current Hot Swap state of the module.
If rlPhDModuleHotSwapAdminStatus is down(2) then
rlPhDModuleHotSwapOperStatus should be down(2). If
rlPhDModuleHotSwapAdminStatus is changed to up(1) then
rlPhDModuleHotSwapOperStatus should change to
up(1) if the module presents; it should remain in the down(2) state if
and only if the module does not present."
::= { rlPhDModuleHotSwapEntry 2 }
rlPhDStackOrderTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlPhDStackOrderEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table enables the user to configure the order
of the stack units as displayed on his GUI.
The order of the entries in this table corresponds
to the last configured order. If the stack units order was
never configured, the order will be the same as in the rlPhDStackTable."
::= { rlPhysicalDescription 6 }
rlPhDStackOrderEntry OBJECT-TYPE
SYNTAX RlPhDStackOrderEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A entry of this table specifies a stack unit in the position desired by the user"
INDEX { rlPhdStackOrderCurrentUnitPosition }
::= { rlPhDStackOrderTable 1 }
RlPhDStackOrderEntry ::= SEQUENCE {
rlPhdStackOrderCurrentUnitPosition INTEGER,
rlPhdStackOrderDesiredUnitPosition INTEGER,
rlPhdStackOrderUnitIndex INTEGER,
rlPhdStackOrderUnitType INTEGER
}
rlPhdStackOrderCurrentUnitPosition OBJECT-TYPE
SYNTAX INTEGER
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The current stack unit position."
::= { rlPhDStackOrderEntry 1 }
rlPhdStackOrderDesiredUnitPosition OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The desired stack unit position. Note that setting this MIB
object will take effect only after setting the rlPhdStackReorder MIB
object below. After setting this MIB object and until a further change
of at least one instance of the rlPhdStackOrderDesiredUnitPosition object,
the values of the rlPhdStackOrderCurrentUnitPosition objectinstance and
the corresponding rlPhdStackOrderDesiredUnitPosition object instance
will be the same."
::= { rlPhDStackOrderEntry 2 }
rlPhdStackOrderUnitIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is the original unit index, i.e. has the same value as rlPhdStackUnit
above."
::= { rlPhDStackOrderEntry 3 }
rlPhdStackOrderUnitType OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type of the stack unit described by this entry. It has the same value
as rlPhdStackType above. This information is duplicated here only for easier
retrieval by the device manager."
::= { rlPhDStackOrderEntry 4 }
rlPhdStackReorder OBJECT-TYPE
SYNTAX INTEGER {reorder(1)}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting this MIB object will cause the settings of the
rlPhdStackOrderDesiredUnitPosition MIB object instances to take effect.
After setting this MIB object and until a further change
of at least one instance of the rlPhdStackOrderDesiredUnitPosition object,
the values of the rlPhdStackOrderCurrentUnitPosition objectinstance and
the corresponding rlPhdStackOrderDesiredUnitPosition object instance
will be the same."
::= { rlPhysicalDescription 7 }
rlPhdNumberOfUnits OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Shows the current number of units in the stack."
::= { rlPhysicalDescription 8 }
rlPhdMaxNumberOfUnits OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Shows the maximum number of units in the stack."
::= { rlPhysicalDescription 9 }
rlIfInterfaces OBJECT IDENTIFIER ::= { rnd 54 }
rlIfMibVersion OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"MIB's version, the current version is 1."
::= { rlIfInterfaces 1 }
rlIfNumOfPhPorts OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Total number of physical ports on this device
(including all stack units)"
::= { rlIfInterfaces 2 }
rlIfMapOfOnPhPorts OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Each bit in this octet string indicates that the correspondig port's
ifOperStatus is ON if set.
The mapping of port number to bits in this octet string is as follows:
The port with the L2 interface number 1 is mapped to the least
significant bit of the 1st octet, the port with L2 ifNumber 2 to the
next significant bit in the 1st octet, port 8 to the most-significant
bit of the in the 1st octet, port 9 to the least
significant bit of the 2nd octet, etc. and in general,
port n to bit corresponding to 2**((n mod 8) -1) in byte n/8 + 1"
::= { rlIfInterfaces 3 }
rlIfClearPortMibCounters OBJECT-TYPE
SYNTAX PortList
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Each bit that is set in this portList represent a port that
its mib counters should be reset."
::= { rlIfInterfaces 4 }
rlIfNumOfUserDefinedPorts OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of user defined ports on this device."
::= { rlIfInterfaces 5 }
rlIfFirstOutOfBandIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"First ifIndex of out-of-band port.
This scalar will exists only if rlIfNumOfUserDefinedPorts
is different from 0."
::= { rlIfInterfaces 6 }
rlIfNumOfLoopbackPorts OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of loopback ports on this device."
::= { rlIfInterfaces 7 }
rlIfFirstLoopbackIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"First ifIndex of loopback port.
This scalar will exists only if rlIfNumOfLoopbackPorts
is different from 0."
::= { rlIfInterfaces 8 }
rlMacMulticast OBJECT IDENTIFIER ::= { rnd 55 }
rlMacMulticastEnable OBJECT-TYPE
SYNTAX TruthValue
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/Disable MAC Multicast bridging in the device."
::= { rlMacMulticast 1 }
rlIgmpSnoop OBJECT IDENTIFIER ::= { rlMacMulticast 2 }
rlIgmpSnoopMibVersion OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"MIB's version, the current version is 2.
The addition is that IGMP Snooping is per vlan instead of per device.
There are additional timers to the protocol: leave time-out and query time-out. "
::= { rlIgmpSnoop 1 }
rlIgmpSnoopEnable OBJECT-TYPE
SYNTAX TruthValue
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/Disable IGMP Snooping in the switch."
::= { rlIgmpSnoop 2 }
rlIgmpSnoopHostAgingTime OBJECT-TYPE
SYNTAX INTEGER (1 .. 2147483647 )
-- UNITS "seconds"
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The amount of time that should pass before aging out
an entry in the rlIgmpSnoopGroupTable will be aged out."
DEFVAL {360}
::= { rlIgmpSnoop 3 }
rlIgmpSnoopRouterAgingTime OBJECT-TYPE
SYNTAX INTEGER (1 .. 2147483647 )
-- UNITS "seconds"
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The amount of time that should pass before aging out
an entry in the rlIgmpSnoopInterfaceTable will be aged out."
DEFVAL {900}
::= { rlIgmpSnoop 4 }
rlIgmpSnoopGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlIgmpSnoopGroupEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The (conceptual) table listing the IP multicast groups
for which there are members on a particular interface."
::= { rlIgmpSnoop 5 }
rlIgmpSnoopGroupEntry OBJECT-TYPE
SYNTAX RlIgmpSnoopGroupEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry (conceptual row) in the rlIgmpSnoopGroupTable."
INDEX { rlIgmpSnoopGroupTag, rlIgmpSnoopGroupAddress,
rlIgmpSnoopGroupPort}
::= { rlIgmpSnoopGroupTable 1 }
RlIgmpSnoopGroupEntry ::= SEQUENCE {
rlIgmpSnoopGroupTag INTEGER,
rlIgmpSnoopGroupAddress MacAddress,
rlIgmpSnoopGroupPort INTEGER,
rlIgmpSnoopGroupExpiryTime INTEGER
}
rlIgmpSnoopGroupTag OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The VLAN tag for which this entry contains
information for an IP multicast group address."
::= { rlIgmpSnoopGroupEntry 1 }
rlIgmpSnoopGroupAddress OBJECT-TYPE
SYNTAX MacAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The MAC multicast group address for which this entry
contains information."
::= { rlIgmpSnoopGroupEntry 2 }
rlIgmpSnoopGroupPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The ifIndex value of the port for which this entry contains
information for an IP multicast group address."
::= { rlIgmpSnoopGroupEntry 3 }
rlIgmpSnoopGroupExpiryTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The minimum amount of time remaining before this entry will aged out."
::= { rlIgmpSnoopGroupEntry 4 }
rlIgmpSnoopRouterTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlIgmpSnoopRouterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The (conceptual) table listing the ports for which there are
IP Multicast Routers."
::= { rlIgmpSnoop 6 }
rlIgmpSnoopRouterEntry OBJECT-TYPE
SYNTAX RlIgmpSnoopRouterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry (conceptual row) in the rlIgmpSnoopRouterTable."
INDEX { rlIgmpSnoopRouterTag, rlIgmpSnoopRouterPort }
::= { rlIgmpSnoopRouterTable 1 }
RlIgmpSnoopRouterEntry ::= SEQUENCE {
rlIgmpSnoopRouterTag INTEGER,
rlIgmpSnoopRouterPort INTEGER,
rlIgmpSnoopRouterExpiryTime INTEGER
}
rlIgmpSnoopRouterTag OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The tag of the VLAN for which this entry contains
information for an IP Multicast Router."
::= { rlIgmpSnoopRouterEntry 1 }
rlIgmpSnoopRouterPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The interface for which this entry contains information for
an IP multicast Router."
::= { rlIgmpSnoopRouterEntry 2 }
rlIgmpSnoopRouterExpiryTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The minimum amount of time remaining before this entry will aged out."
::= { rlIgmpSnoopRouterEntry 3 }
rlIgmpSnoopVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlIgmpSnoopVlanEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The table listing the per vlan parameters : enable/disable ,
aging-out timers , filter ports and permanent ports."
::= { rlIgmpSnoop 7 }
rlIgmpSnoopVlanEntry OBJECT-TYPE
SYNTAX RlIgmpSnoopVlanEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry (conceptual row) in the rlIgmpSnoopVlanTable."
INDEX { rlIgmpSnoopVlanTag }
::= { rlIgmpSnoopVlanTable 1 }
RlIgmpSnoopVlanEntry ::= SEQUENCE {
rlIgmpSnoopVlanTag INTEGER,
rlIgmpSnoopVlanEnable TruthValue,
rlIgmpSnoopVlanRouterLearn TruthValue,
rlIgmpSnoopVlanHostTimeOut INTEGER,
rlIgmpSnoopVlanQuerierTimeOut INTEGER,
rlIgmpSnoopVlanRouterTimeOut INTEGER,
rlIgmpSnoopVlanLeaveTimeOut INTEGER
}
rlIgmpSnoopVlanTag OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The tag of the VLAN for which this entry contains
information for an IP Multicast Router."
::= { rlIgmpSnoopVlanEntry 1 }
rlIgmpSnoopVlanEnable OBJECT-TYPE
SYNTAX TruthValue
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/Disable IGMP Snooping in the vlan."
::= { rlIgmpSnoopVlanEntry 2 }
rlIgmpSnoopVlanRouterLearn OBJECT-TYPE
SYNTAX TruthValue
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/Disable of Learning of routers in the vlan."
::= { rlIgmpSnoopVlanEntry 3 }
rlIgmpSnoopVlanHostTimeOut OBJECT-TYPE
SYNTAX INTEGER (1 .. 2147483647 )
-- UNITS "seconds"
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The amount of time that should pass before aging out
an entry in the rlIgmpSnoopGroupTable for this vlan."
DEFVAL {250}
::= { rlIgmpSnoopVlanEntry 4 }
rlIgmpSnoopVlanQuerierTimeOut OBJECT-TYPE
SYNTAX INTEGER (1 .. 2147483647 )
-- UNITS "seconds"
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The amount of time that should pass before aging out
an entry in the rlIgmpSnoopRouterTable for this vlan."
DEFVAL {260}
::= { rlIgmpSnoopVlanEntry 5 }
rlIgmpSnoopVlanRouterTimeOut OBJECT-TYPE
SYNTAX INTEGER (1 .. 2147483647 )
-- UNITS "seconds"
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The amount of time that should pass before aging out
an entry in the rlIgmpSnoopRouterTable for this vlan."
DEFVAL {140}
::= { rlIgmpSnoopVlanEntry 6 }
rlIgmpSnoopVlanLeaveTimeOut OBJECT-TYPE
SYNTAX INTEGER (0 .. 2147483647 )
-- UNITS "seconds"
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The amount of time that should pass before aging out
an entry in the rlIgmpSnoopGroupTable for this vlan, after recieving a leave
message from the port of the entry."
DEFVAL {10}
::= { rlIgmpSnoopVlanEntry 7 }
rlIgmpSnoopIGMP224ReportsHandle OBJECT-TYPE
SYNTAX INTEGER {
allow(1),
ignore (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This varaiable indicates whether to allow IGMP reports for groups in the
224.0.0.X range when the group address is already manually configured or to ignore."
::= { rlIgmpSnoop 8 }
rlIgmpSnoopMrouterEnabled OBJECT-TYPE
SYNTAX TruthValue
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether the device functions as a multicast router."
::= { rlIgmpSnoop 9 }
rlMacMulticastMaxEntriesNum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum number of Mac Multicast entries the device supports."
::= { rlMacMulticast 3 }
rlGalileo OBJECT IDENTIFIER ::= { rnd 56 }
rlpBridgeMIBObjects OBJECT IDENTIFIER ::= { rnd 57 }
rldot1dPriority OBJECT IDENTIFIER ::= { rlpBridgeMIBObjects 1 }
rldot1dPriorityMibVersion OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"MIB's version, the current version is 1."
::= { rldot1dPriority 1 }
--
-- rldot1dPriorityPortGroupTable
--
rldot1dPriorityPortGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF Rldot1dPriorityPortGroupEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of PortGroupNumber for each port."
::= { rldot1dPriority 2 }
rldot1dPriorityPortGroupEntry OBJECT-TYPE
SYNTAX Rldot1dPriorityPortGroupEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"All ports belonging to a same group have
the same User Priority to Traffic Class mapping."
INDEX { dot1dBasePort }
::= { rldot1dPriorityPortGroupTable 1 }
Rldot1dPriorityPortGroupEntry ::= SEQUENCE {
rldot1dPriorityPortGroupNumber INTEGER
}
rldot1dPriorityPortGroupNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A group, that port belongs to. All ports belonging
to a same group have the same User Priority to
Traffic Class mapping."
::= { rldot1dPriorityPortGroupEntry 1 }
rldot1dStp OBJECT IDENTIFIER ::= { rlpBridgeMIBObjects 2 }
--
-- Scalars
--
rldot1dStpMibVersion OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"MIB's version, the current version is 2."
::= { rldot1dStp 1 }
rldot1dStpType OBJECT-TYPE
SYNTAX INTEGER {
perDevice (1),
mstp (4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Specifies whether the device supports Spanning Tree per device,
or per group."
::= { rldot1dStp 2 }
rldot1dStpEnable OBJECT-TYPE
SYNTAX TruthValue
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable / Disable spanning tree. When working in per vlan mode
enable / disable STP per all vlans."
DEFVAL { true }
::= { rldot1dStp 3 }
rldot1dStpPortMustBelongToVlan OBJECT-TYPE
SYNTAX TruthValue
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies whether a port must belong to a VLAN in order
to participate in the STP."
DEFVAL { true }
::= { rldot1dStp 4 }
rldot1dStpExtendedPortNumberFormat OBJECT-TYPE
SYNTAX TruthValue
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies whether the STP uses the extended port fnumber format."
DEFVAL { false }
::= { rldot1dStp 5 }
--
-- The Spanning Tree Vlan Table
--
rldot1dStpVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF Rldot1dStpVlanEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table that contains vlan-specific information
for the Spanning Tree Protocol."
::= { rldot1dStp 6 }
rldot1dStpVlanEntry OBJECT-TYPE
SYNTAX Rldot1dStpVlanEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of information maintained by every Vlan
about the Spanning Tree Protocol state for that
Vlan."
INDEX { rldot1dStpVlan }
::= { rldot1dStpVlanTable 1 }
Rldot1dStpVlanEntry ::= SEQUENCE {
rldot1dStpVlan INTEGER,
rldot1dStpVlanEnable TruthValue,
rldot1dStpTimeSinceTopologyChange TimeTicks,
rldot1dStpTopChanges Counter,
rldot1dStpDesignatedRoot BridgeId,
rldot1dStpRootCost INTEGER,
rldot1dStpRootPort INTEGER,
rldot1dStpMaxAge Timeout,
rldot1dStpHelloTime Timeout,
rldot1dStpHoldTime INTEGER,
rldot1dStpForwardDelay Timeout
}
rldot1dStpVlan OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Vlan index."
::= { rldot1dStpVlanEntry 1 }
rldot1dStpVlanEnable OBJECT-TYPE
SYNTAX TruthValue
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies whether this vlan is STP enable or disable"
REFERENCE
" ?? "
DEFVAL { true }
::= { rldot1dStpVlanEntry 2 }
rldot1dStpTimeSinceTopologyChange OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The time (in hundredths of a second) since the
last time a topology change was detected by the
bridge entity."
REFERENCE
"IEEE 802.1D-1990: Section 6.8.1.1.3"
::= { rldot1dStpVlanEntry 3 }
rldot1dStpTopChanges OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of topology changes detected by
this bridge since the management entity was last
reset or initialized."
REFERENCE
"IEEE 802.1D-1990: Section 6.8.1.1.3"
::= { rldot1dStpVlanEntry 4 }
rldot1dStpDesignatedRoot OBJECT-TYPE
SYNTAX BridgeId
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The bridge identifier of the root of the spanning
tree as determined by the Spanning Tree Protocol
as executed by this node. This value is used as
the Root Identifier parameter in all Configuration
Bridge PDUs originated by this node."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.3.1"
::= { rldot1dStpVlanEntry 5 }
rldot1dStpRootCost OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The cost of the path to the root as seen from
this bridge."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.3.2"
::= { rldot1dStpVlanEntry 6 }
rldot1dStpRootPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The port number of the port which offers the
lowest cost path from this bridge to the root
bridge."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.3.3"
::= { rldot1dStpVlanEntry 7 }
rldot1dStpMaxAge OBJECT-TYPE
SYNTAX Timeout
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum age of Spanning Tree Protocol
information learned from the network on any port
before it is discarded, in units of hundredths of
a second. This is the actual value that this
bridge is currently using."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.3.4"
::= { rldot1dStpVlanEntry 8 }
rldot1dStpHelloTime OBJECT-TYPE
SYNTAX Timeout
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The amount of time between the transmission of
Configuration bridge PDUs by this node on any port
when it is the root of the spanning tree or trying
to become so, in units of hundredths of a second.
This is the actual value that this bridge is
currently using."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.3.5"
::= { rldot1dStpVlanEntry 9 }
rldot1dStpHoldTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This time value determines the interval length
during which no more than two Configuration bridge
PDUs shall be transmitted by this node, in units
of hundredths of a second."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.3.14"
::= { rldot1dStpVlanEntry 10 }
rldot1dStpForwardDelay OBJECT-TYPE
SYNTAX Timeout
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This time value, measured in units of hundredths
of a second, controls how fast a port changes its
spanning state when moving towards the Forwarding
state. The value determines how long the port
stays in each of the Listening and Learning
states, which precede the Forwarding state. This
value is also used, when a topology change has
been detected and is underway, to age all dynamic
entries in the Forwarding Database. [Note that
this value is the one that this bridge is
currently using, in contrast to
dot1dStpBridgeForwardDelay which is the value that
this bridge and all others would start using
if/when this bridge were to become the root.]"
REFERENCE
"IEEE 802.1D-1990: Section 4.5.3.6"
::= { rldot1dStpVlanEntry 11 }
--
-- rldot1dStpVlanPortTable
--
rldot1dStpVlanPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF Rldot1dStpVlanPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table that contains pair <vlan, port> specific information
for the Spanning Tree Protocol."
::= { rldot1dStp 7 }
rldot1dStpVlanPortEntry OBJECT-TYPE
SYNTAX Rldot1dStpVlanPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of information maintained by every pair <vlan, port>
about the Spanning Tree Protocol state for that pair."
INDEX { rldot1dStpVlanPortVlan, rldot1dStpVlanPortPort }
::= { rldot1dStpVlanPortTable 1 }
Rldot1dStpVlanPortEntry ::= SEQUENCE {
rldot1dStpVlanPortVlan INTEGER,
rldot1dStpVlanPortPort INTEGER,
rldot1dStpVlanPortPriority INTEGER,
rldot1dStpVlanPortState INTEGER,
rldot1dStpVlanPortEnable INTEGER,
rldot1dStpVlanPortPathCost INTEGER,
rldot1dStpVlanPortDesignatedRoot BridgeId,
rldot1dStpVlanPortDesignatedCost INTEGER,
rldot1dStpVlanPortDesignatedBridge BridgeId,
rldot1dStpVlanPortDesignatedPort OCTET STRING,
rldot1dStpVlanPortForwardTransitions Counter
}
rldot1dStpVlanPortVlan OBJECT-TYPE
SYNTAX INTEGER (1..4095)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The Vlan number that the port belongs to, and for which this entry
contains Spanning Tree Protocol management
information."
REFERENCE
"IEEE 802.1s/D2-1999 "
::= { rldot1dStpVlanPortEntry 1 }
rldot1dStpVlanPortPort OBJECT-TYPE
SYNTAX INTEGER (1..4096)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The port number of the port for which this entry
contains Spanning Tree Protocol management
information."
REFERENCE
"IEEE 802.1t/D2-1999: Section 9.2.6"
::= { rldot1dStpVlanPortEntry 2 }
rldot1dStpVlanPortPriority OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The value of the priority field which is
contained in the more significant 4 bits of the most
significant octet of the (2 octet long) Port ID.
The other octet of the Port ID is given by the value
of rldot1dStpVlanPort."
REFERENCE
"IEEE 802.1t/D2-1999: Section 9.2.6"
::= { rldot1dStpVlanPortEntry 3 }
rldot1dStpVlanPortState OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
blocking(2),
listening(3),
learning(4),
forwarding(5),
broken(6)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The port's current state as defined by application of
the Spanning Tree Protocol. This state controls what
action a port takes on reception of a frame.
If the bridge has detected a port that is malfunctioning
it will place that port into the broken(6) state. For ports
which are disabled (see dot1dStpVlanPortEnable), this object
will have a value of disabled(1)."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.5.2"
::= { rldot1dStpVlanPortEntry 4 }
rldot1dStpVlanPortEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The enabled/disabled status of the port."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.5.2"
::= { rldot1dStpVlanPortEntry 5 }
rldot1dStpVlanPortPathCost OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The contribution of this port to the path cost of
paths towards the spanning tree root which include
this port. 802.1D-1990 recommends that the
default value of this parameter be in inverse
proportion to the speed of the attached LAN."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.5.3"
::= { rldot1dStpVlanPortEntry 6 }
rldot1dStpVlanPortDesignatedRoot OBJECT-TYPE
SYNTAX BridgeId
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unique Bridge Identifier of the Bridge
recorded as the Root in the Configuration BPDUs
transmitted by the Designated Bridge for the
segment to which the port is attached."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.5.4"
::= { rldot1dStpVlanPortEntry 7 }
rldot1dStpVlanPortDesignatedCost OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The path cost of the Designated Port of the
segment connected to this port. This value is
compared to the Root Path Cost field in received
bridge PDUs."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.5.5"
::= { rldot1dStpVlanPortEntry 8 }
rldot1dStpVlanPortDesignatedBridge OBJECT-TYPE
SYNTAX BridgeId
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Bridge Identifier of the bridge which this
port considers to be the Designated Bridge for
this port's segment."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.5.6"
::= { rldot1dStpVlanPortEntry 9 }
rldot1dStpVlanPortDesignatedPort OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (2))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Port Identifier of the port on the Designated
Bridge for this port's segment."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.5.7"
::= { rldot1dStpVlanPortEntry 10 }
rldot1dStpVlanPortForwardTransitions OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of times this port has transitioned
from the Learning state to the Forwarding state."
::= { rldot1dStpVlanPortEntry 11 }
--
-- STP Private TRAP variables
--
rldot1dStpTrapVariable OBJECT IDENTIFIER ::= { rldot1dStp 8 }
rldot1dStpTrapVrblifIndex OBJECT-TYPE
SYNTAX InterfaceIndex
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The ifIndex of port which STP status was changed"
::= { rldot1dStpTrapVariable 1 }
rldot1dStpTrapVrblVID OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The VID of VLAN to which the port belongs which STP status was changed"
::= { rldot1dStpTrapVariable 2 }
rldot1dStpTypeAfterReset OBJECT-TYPE
SYNTAX INTEGER {
perDevice(1),
mstp(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"New mode of spaning tree supported by the device after the next reset."
DEFVAL { perDevice }
::= { rldot1dStp 9 }
rldot1dStpMonitorTime OBJECT-TYPE
SYNTAX INTEGER (1..20)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Factor of hello-time during which a port is monotored to determine if it is stable."
DEFVAL { 10 }
::= { rldot1dStp 10 }
rldot1dStpBpduCount OBJECT-TYPE
SYNTAX INTEGER (1..60)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The number of bpdu that need to received for the link to be considered stable."
DEFVAL { 10 }
::= { rldot1dStp 11 }
rldot1dStpLastChanged OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The last time any object in this table was changed
by SNMP or other local management means."
REFERENCE
""
::= { rldot1dStp 12 }
--
-- rldot1dStpPortTable
--
rldot1dStpPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF Rldot1dStpPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table that contains extended pair port specific information."
::= { rldot1dStp 13 }
rldot1dStpPortEntry OBJECT-TYPE
SYNTAX Rldot1dStpPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of information maintained by every port
about the Spanning Tree Protocol state for that port."
INDEX { rldot1dStpPortPort }
::= { rldot1dStpPortTable 1 }
Rldot1dStpPortEntry ::= SEQUENCE {
rldot1dStpPortPort INTEGER,
rldot1dStpPortDampEnable TruthValue,
rldot1dStpPortDampStable TruthValue,
rldot1dStpPortFilterBpdu TruthValue,
rldot1dStpPortBpduSent Counter-32,
rldot1dStpPortBpduReceived Counter-32
}
rldot1dStpPortPort OBJECT-TYPE
SYNTAX INTEGER (1..4096)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The port number of the port for which this entry
contains Spanning Tree Protocol management
information."
REFERENCE
"IEEE 802.1t/D2-1999: Section 9.2.6"
::= { rldot1dStpPortEntry 1 }
rldot1dStpPortDampEnable OBJECT-TYPE
SYNTAX TruthValue
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifid if dampening is enabled on this port."
REFERENCE
""
DEFVAL { false }
::= { rldot1dStpPortEntry 2 }
rldot1dStpPortDampStable OBJECT-TYPE
SYNTAX TruthValue
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Specifid if the port is stable."
REFERENCE
""
DEFVAL { true }
::= { rldot1dStpPortEntry 3 }
rldot1dStpPortFilterBpdu OBJECT-TYPE
SYNTAX TruthValue
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifid if this port should filter bpdus."
REFERENCE
""
DEFVAL { false }
::= { rldot1dStpPortEntry 4 }
rldot1dStpPortBpduSent OBJECT-TYPE
SYNTAX Counter-32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Specifid the number of bpdu sent from this port."
REFERENCE
""
::= { rldot1dStpPortEntry 5 }
rldot1dStpPortBpduReceived OBJECT-TYPE
SYNTAX Counter-32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Specifid the number of bpdu received in this port."
REFERENCE
""
::= { rldot1dStpPortEntry 6 }
rldot1dStpPortsEnable OBJECT-TYPE
SYNTAX TruthValue
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Enable / Disable spanning tree on ports by default ."
DEFVAL { true }
::= { rldot1dStp 14 }
rldot1dStpTaggedFlooding OBJECT-TYPE
SYNTAX TruthValue
ACCESS read-only
STATUS mandatory
DESCRIPTION
"flooding can be done in tagged bpdu ."
::= { rldot1dStp 15 }
rldot1dStpPortBelongToVlanDefault OBJECT-TYPE
SYNTAX TruthValue
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The default value of rldot1dStpPortMustBelongToVlan ."
::= { rldot1dStp 16 }
rldot1dStpEnableByDefault OBJECT-TYPE
SYNTAX TruthValue
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The default value of rldot1dStpEnable ."
::= { rldot1dStp 17 }
rldot1dStpPortToDefault OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To order port/s to revert to default setings ."
::= { rldot1dStp 18 }
rldot1dStpSupportedType OBJECT-TYPE
SYNTAX INTEGER {
perDevice(1),
perVlan(2),
mstp(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type of stp supported by the device."
::= { rldot1dStp 19 }
rldot1dStpEdgeportSupportInStp OBJECT-TYPE
SYNTAX TruthValue
ACCESS read-only
STATUS mandatory
DESCRIPTION
"If EdgePort is supported in stpCompatible mode ."
::= { rldot1dStp 20 }
rldot1dExtBase OBJECT IDENTIFIER ::= { rlpBridgeMIBObjects 3 }
rldot1dExtBaseMibVersion OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"MIB's version, the current version is 1."
::= { rldot1dExtBase 1 }
rldot1dDeviceCapabilities OBJECT-TYPE
-- SYNTAX BITS {
-- rldot1dIGMPSnoopingFilteringServices(0)
-- ## can perform filtering of
-- ## individual multicast addresses
-- ## controlled by IGMP snooping.
-- rldot1dDefaultFilteringAllServices(1)
-- ## can perform default filtering
-- ## behavior for All multicast addresses.
-- ## controlled by Multicast DB.
-- rldot1dDefaultFilteringUnregServices(2)
-- ## can perform default filtering
-- ## behavior for Unregistered
-- ## multicast addresses.
-- ## controlled by Multicast DB.
-- }
SYNTAX OCTET STRING (SIZE(1))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the optional parts of private extension of
IEEE 802.1D and 802.1Q that are implemented by this
device and are manageable through this MIB.
Capabilities that are allowed on a per-port basis are
indicated in dot1dPortCapabilities."
::= { rldot1dExtBase 2 }
rldot1wRStp OBJECT IDENTIFIER ::= { rlpBridgeMIBObjects 4 }
--
-- rldot1wStpVlanEdgePortTable
--
rldot1wRStpVlanEdgePortTable OBJECT-TYPE
SYNTAX SEQUENCE OF Rldot1wRStpVlanEdgePortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table that contains pair <vlan, port> specific information
for the Rapid Spanning Tree Protocol."
::= { rldot1wRStp 1 }
rldot1wRStpVlanEdgePortEntry OBJECT-TYPE
SYNTAX Rldot1wRStpVlanEdgePortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of information maintained by every pair <vlan, port>
about the RAPID Spanning Tree Protocol state for that pair."
INDEX { rldot1wRStpVlanEdgePortVlan, rldot1wRStpVlanEdgePortPort }
::= { rldot1wRStpVlanEdgePortTable 1 }
Rldot1wRStpVlanEdgePortEntry ::= SEQUENCE {
rldot1wRStpVlanEdgePortVlan INTEGER,
rldot1wRStpVlanEdgePortPort INTEGER,
rldot1wRStpEdgePortStatus TruthValue
}
rldot1wRStpVlanEdgePortVlan OBJECT-TYPE
SYNTAX INTEGER (1..4095)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Vlan number that the port belongs to, and for which this entry
contains Spanning Tree Protocol management information,
If STP per device then only one value of 1 is allowed.
If STP per a VLAN then all value of 1..4095 are allowed."
::= { rldot1wRStpVlanEdgePortEntry 1 }
rldot1wRStpVlanEdgePortPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The port number of the port for which this entry
contains Spanning Tree Protocol management information."
::= { rldot1wRStpVlanEdgePortEntry 2 }
rldot1wRStpEdgePortStatus OBJECT-TYPE
SYNTAX TruthValue
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies whether this port is an Edge Port or not"
REFERENCE
"IEEE 802.1wd6-2000: Section 17.13.3.1 "
DEFVAL { false }
::= { rldot1wRStpVlanEdgePortEntry 3 }
--
-- rldot1wStpForceVersionTable
--
rldot1wRStpForceVersionTable OBJECT-TYPE
SYNTAX SEQUENCE OF Rldot1wRStpForceVersionEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table that contains <vlan> specific information
for the Rapid Spanning Tree Protocol."
::= { rldot1wRStp 2 }
rldot1wRStpForceVersionEntry OBJECT-TYPE
SYNTAX Rldot1wRStpForceVersionEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of information maintained by every <vlan>
about the RAPID Spanning Tree Protocol state for that pair."
INDEX { rldot1wRStpForceVersionVlan }
::= { rldot1wRStpForceVersionTable 1 }
Rldot1wRStpForceVersionEntry ::= SEQUENCE {
rldot1wRStpForceVersionVlan INTEGER,
rldot1wRStpForceVersionState INTEGER
}
rldot1wRStpForceVersionVlan OBJECT-TYPE
SYNTAX INTEGER (1..4095)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Vlan number that the port belongs to, and for which this entry
contains Spanning Tree Protocol management information,
If STP per device then only one value of 1 is allowed.
If STP per a VLAN then all value of 1..4095 are allowed."
::= { rldot1wRStpForceVersionEntry 1 }
rldot1wRStpForceVersionState OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies whether this Bridge uses the normal RSTP algorithm,
or STP Compatibility algorythm:
0 - STP Compatibility
2 - Normal RSTP"
REFERENCE
"IEEE 802.1wd9-2000: Section 17.16.1 "
DEFVAL { 2 }
::= { rldot1wRStpForceVersionEntry 2 }
rldot1pPriorityMap OBJECT IDENTIFIER ::= { rlpBridgeMIBObjects 5 }
rldot1pPriorityMapState OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"enable / disable"
::= { rldot1pPriorityMap 1 }
rldot1pPriorityMapTable OBJECT-TYPE
SYNTAX SEQUENCE OF Rldot1pPriorityMapEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table hold information the priority maps"
::= { rldot1pPriorityMap 2 }
rldot1pPriorityMapEntry OBJECT-TYPE
SYNTAX Rldot1pPriorityMapEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The row definition for this table."
INDEX { rldot1pPriorityMapName }
::= { rldot1pPriorityMapTable 1 }
Rldot1pPriorityMapEntry ::= SEQUENCE {
rldot1pPriorityMapName DisplayString,
rldot1pPriorityMapPriority OCTET STRING,
rldot1pPriorityMapPort PortList,
rldot1pPriorityMapPortList PortList,
rldot1pPriorityMapStatus RowStatus
}
rldot1pPriorityMapName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..25))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The map name"
::= { rldot1pPriorityMapEntry 1 }
rldot1pPriorityMapPriority OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (8))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The map holding the queue"
::= { rldot1pPriorityMapEntry 2 }
rldot1pPriorityMapPort OBJECT-TYPE
SYNTAX PortList
ACCESS read-write
STATUS mandatory
DESCRIPTION
"the port that the map, is applied on in config"
::= { rldot1pPriorityMapEntry 3 }
rldot1pPriorityMapPortList OBJECT-TYPE
SYNTAX PortList
ACCESS read-only
STATUS mandatory
DESCRIPTION
"the ports that the map, is applied on in actual"
::= { rldot1pPriorityMapEntry 4 }
rldot1pPriorityMapStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The status of the table entry. It's used to delete an entry"
::= { rldot1pPriorityMapEntry 5 }
rldot1sMstp OBJECT IDENTIFIER ::= { rlpBridgeMIBObjects 6 }
--
-- The Multiple Spanning Tree Instance Table
--
rldot1sMstpInstanceTable OBJECT-TYPE
SYNTAX SEQUENCE OF Rldot1sMstpInstanceEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table that contains Mstp instance specific information
for the Multiple Spanning Tree Protocol."
::= { rldot1sMstp 1 }
rldot1sMstpInstanceEntry OBJECT-TYPE
SYNTAX Rldot1sMstpInstanceEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of information maintained by every instance
about the multiple Spanning Tree Protocol state for
that instance."
INDEX { rldot1sMstpInstanceId }
::= { rldot1sMstpInstanceTable 1 }
Rldot1sMstpInstanceEntry ::= SEQUENCE {
rldot1sMstpInstanceId INTEGER,
rldot1sMstpInstanceEnable TruthValue,
rldot1sMstpInstanceTimeSinceTopologyChange TimeTicks,
rldot1sMstpInstanceTopChanges Counter,
rldot1sMstpInstanceDesignatedRoot BridgeId,
rldot1sMstpInstanceRootCost INTEGER,
rldot1sMstpInstanceRootPort INTEGER,
rldot1sMstpInstanceMaxAge Timeout,
rldot1sMstpInstanceHelloTime Timeout,
rldot1sMstpInstanceHoldTime INTEGER,
rldot1sMstpInstanceForwardDelay Timeout,
rldot1sMstpInstancePriority INTEGER
}
rldot1sMstpInstanceId OBJECT-TYPE
SYNTAX INTEGER (1..64)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Instance index."
::= { rldot1sMstpInstanceEntry 1 }
rldot1sMstpInstanceEnable OBJECT-TYPE
SYNTAX TruthValue
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies whether this Instance is STP enable or disable"
REFERENCE
" ?? "
DEFVAL { false }
::= { rldot1sMstpInstanceEntry 2 }
rldot1sMstpInstanceTimeSinceTopologyChange OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The time (in hundredths of a second) since the
last time a topology change was detected by the
Mstp Instance ."
REFERENCE
"IEEE 802.1D-1990: Section 6.8.1.1.3"
::= { rldot1sMstpInstanceEntry 3 }
rldot1sMstpInstanceTopChanges OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of topology changes detected by
this Instance since the management entity was last
reset or initialized."
REFERENCE
"IEEE 802.1D-1990: Section 6.8.1.1.3"
::= { rldot1sMstpInstanceEntry 4 }
rldot1sMstpInstanceDesignatedRoot OBJECT-TYPE
SYNTAX BridgeId
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The bridge identifier of the root of the spanning
tree as determined by the Muliple Spanning Tree Protocol
as executed by this node. This value is used as
the Root Identifier parameter in all Configuration
Bridge PDUs originated by this node."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.3.1"
::= { rldot1sMstpInstanceEntry 5 }
rldot1sMstpInstanceRootCost OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The cost of the path to the root as seen from
this bridge."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.3.2"
::= { rldot1sMstpInstanceEntry 6 }
rldot1sMstpInstanceRootPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The port number of the port which offers the
lowest cost path from this bridge to the root
bridge."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.3.3"
::= { rldot1sMstpInstanceEntry 7 }
rldot1sMstpInstanceMaxAge OBJECT-TYPE
SYNTAX Timeout
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum age of Spanning Tree Protocol
information learned from the network on any port
before it is discarded, in units of hundredths of
a second. This is the actual value that this
bridge is currently using."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.3.4"
::= { rldot1sMstpInstanceEntry 8 }
rldot1sMstpInstanceHelloTime OBJECT-TYPE
SYNTAX Timeout
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The amount of time between the transmission of
Configuration bridge PDUs by this node on any port
when it is the root of the spanning tree or trying
to become so, in units of hundredths of a second.
This is the actual value that this bridge is
currently using."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.3.5"
::= { rldot1sMstpInstanceEntry 9 }
rldot1sMstpInstanceHoldTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This time value determines the interval length
during which no more than two Configuration bridge
PDUs shall be transmitted by this node, in units
of hundredths of a second."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.3.14"
::= { rldot1sMstpInstanceEntry 10 }
rldot1sMstpInstanceForwardDelay OBJECT-TYPE
SYNTAX Timeout
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This time value, measured in units of hundredths
of a second, controls how fast a port changes its
spanning state when moving towards the Forwarding
state. The value determines how long the port
stays in each of the Listening and Learning
states, which precede the Forwarding state. This
value is also used, when a topology change has
been detected and is underway, to age all dynamic
entries in the Forwarding Database. [Note that
this value is the one that this bridge is
currently using, in contrast to
dot1dStpBridgeForwardDelay which is the value that
this bridge and all others would start using
if/when this bridge were to become the root.]"
REFERENCE
"IEEE 802.1D-1990: Section 4.5.3.6"
::= { rldot1sMstpInstanceEntry 11 }
rldot1sMstpInstancePriority OBJECT-TYPE
SYNTAX INTEGER (0..61440)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The value of the write-able portion of the Bridge
ID, i.e., the first four bits of the first octet
of the (8 octet long) Bridge ID.The value is a product
of 4096. The next 12 bit are the msti id .
The other (last) 6 octets of the Bridge ID are given
by the value of dot1dBaseBridgeAddress."
REFERENCE
"IEEE 802.1S-2001: Section 13.24.2"
::= {rldot1sMstpInstanceEntry 12 }
--
-- rldot1sMstpInstancePortTable
--
rldot1sMstpInstancePortTable OBJECT-TYPE
SYNTAX SEQUENCE OF Rldot1sMstpInstancePortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table that contains pair <msti, port> specific information
for the Spanning Tree Protocol."
::= { rldot1sMstp 2 }
rldot1sMstpInstancePortEntry OBJECT-TYPE
SYNTAX Rldot1sMstpInstancePortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of information maintained by every pair <msti, port>
about the Spanning Tree Protocol state for that pair."
INDEX { rldot1sMstpInstancePortMstiId, rldot1sMstpInstancePortPort }
::= { rldot1sMstpInstancePortTable 1 }
Rldot1sMstpInstancePortEntry ::= SEQUENCE {
rldot1sMstpInstancePortMstiId INTEGER,
rldot1sMstpInstancePortPort INTEGER,
rldot1sMstpInstancePortPriority INTEGER,
rldot1sMstpInstancePortState INTEGER,
rldot1sMstpInstancePortEnable INTEGER,
rldot1sMstpInstancePortPathCost INTEGER,
rldot1sMstpInstancePortDesignatedRoot BridgeId,
rldot1sMstpInstancePortDesignatedCost INTEGER,
rldot1sMstpInstancePortDesignatedBridge BridgeId,
rldot1sMstpInstancePortDesignatedPort OCTET STRING,
rldot1sMstpInstancePortForwardTransitions Counter,
rldot1sMStpInstancePortAdminPathCost INTEGER
}
rldot1sMstpInstancePortMstiId OBJECT-TYPE
SYNTAX INTEGER (1..64)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The Vlan group number that the port belongs to, and for which this entry
contains Spanning Tree Protocol management
information."
REFERENCE
"IEEE 802.1s/D11-2001 "
::= { rldot1sMstpInstancePortEntry 1 }
rldot1sMstpInstancePortPort OBJECT-TYPE
SYNTAX INTEGER (1..4096)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The port number of the port for which this entry
contains Spanning Tree Protocol management
information."
REFERENCE
"IEEE 802.1t/D2-1999: Section 9.2.6"
::= { rldot1sMstpInstancePortEntry 2 }
rldot1sMstpInstancePortPriority OBJECT-TYPE
SYNTAX INTEGER (0..240)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The value of the priority field which is
contained in the more significant 4 bits of the most
significant octet of the (2 octet long) Port ID.
The value is a product of 16.
The other octet of the Port ID is given by the value
of rldot1dStpVlanGroupPort."
REFERENCE
"IEEE 802.1t/D2-1999: Section 9.2.6"
::= { rldot1sMstpInstancePortEntry 3 }
rldot1sMstpInstancePortState OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
blocking(2),
listening(3),
learning(4),
forwarding(5),
broken(6)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The port's current state as defined by application of
the Spanning Tree Protocol. This state controls what
action a port takes on reception of a frame.
If the bridge has detected a port that is malfunctioning
it will place that port into the broken(6) state. For ports
which are disabled (see dot1dStpVlanPortEnable), this object
will have a value of disabled(1)."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.5.2"
::= { rldot1sMstpInstancePortEntry 4 }
rldot1sMstpInstancePortEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The enabled/disabled status of the port."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.5.2"
::= { rldot1sMstpInstancePortEntry 5 }
rldot1sMstpInstancePortPathCost OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The contribution of this port to the path cost of
paths towards the spanning tree root which include
this port. 802.1D-1990 recommends that the
default value of this parameter be in inverse
proportion to the speed of the attached LAN."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.5.3"
::= { rldot1sMstpInstancePortEntry 6 }
rldot1sMstpInstancePortDesignatedRoot OBJECT-TYPE
SYNTAX BridgeId
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unique Bridge Identifier of the Bridge
recorded as the Root in the Configuration BPDUs
transmitted by the Designated Bridge for the
segment to which the port is attached."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.5.4"
::= { rldot1sMstpInstancePortEntry 7 }
rldot1sMstpInstancePortDesignatedCost OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The path cost of the Designated Port of the
segment connected to this port. This value is
compared to the Root Path Cost field in received
bridge PDUs."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.5.5"
::= { rldot1sMstpInstancePortEntry 8 }
rldot1sMstpInstancePortDesignatedBridge OBJECT-TYPE
SYNTAX BridgeId
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Bridge Identifier of the bridge which this
port considers to be the Designated Bridge for
this port's segment."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.5.6"
::= { rldot1sMstpInstancePortEntry 9 }
rldot1sMstpInstancePortDesignatedPort OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (2))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Port Identifier of the port on the Designated
Bridge for this port's segment."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.5.7"
::= { rldot1sMstpInstancePortEntry 10 }
rldot1sMstpInstancePortForwardTransitions OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of times this port has transitioned
from the Learning state to the Forwarding state."
::= { rldot1sMstpInstancePortEntry 11 }
rldot1sMStpInstancePortAdminPathCost OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The administratively assigned value for the contribution
of this port to the path cost of paths towards the spanning
tree root.
Writing a value of '0' assigns the automatically calculated
default Path Cost value to the port. If the default Path
Cost is being used, this object returns '0' when read.
This complements the object dot1dStpPortPathCost, which
returns the operational value of the path cost."
REFERENCE
"IEEE 802.1D-1998: Section 8.5.5.3"
::= { rldot1sMstpInstancePortEntry 12 }
rldot1sMstpMaxHopes OBJECT-TYPE
SYNTAX INTEGER (1..20)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Max number of hopes that an MST BPDU will travel inside a region."
DEFVAL { 10 }
::= { rldot1sMstp 3 }
rldot1sMstpConfigurationName OBJECT-TYPE
SYNTAX SnmpAdminString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The active configuration name as will be caried in MST BPDU's."
::= { rldot1sMstp 4 }
rldot1sMstpRevisionLevel OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The active revision level."
DEFVAL { 0 }
::= { rldot1sMstp 5 }
--
-- rldot1sMstpVlanTable
--
rldot1sMstpVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF Rldot1sMstpVlanEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table that contains information about the alocation of vlans to groups."
::= { rldot1sMstp 6 }
rldot1sMstpVlanEntry OBJECT-TYPE
SYNTAX Rldot1sMstpVlanEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of information maintained by every vlan
about the group it belongs to."
INDEX { rldot1sMstpVlan }
::= { rldot1sMstpVlanTable 1 }
Rldot1sMstpVlanEntry ::= SEQUENCE {
rldot1sMstpVlan INTEGER,
rldot1sMstpGroup INTEGER,
rldot1sMstpPendingGroup INTEGER
}
rldot1sMstpVlan OBJECT-TYPE
SYNTAX INTEGER (1..4095)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The vlan number of the vlan for which this entry
contains Spanning Tree Protocol management
information."
REFERENCE
"IEEE 802.1s/D11-2001: Section 13.7"
::= { rldot1sMstpVlanEntry 1 }
rldot1sMstpGroup OBJECT-TYPE
SYNTAX INTEGER (0..64)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Specifid the active group number this vlan belonges to."
REFERENCE
""
DEFVAL { 0 }
::= { rldot1sMstpVlanEntry 2 }
rldot1sMstpPendingGroup OBJECT-TYPE
SYNTAX INTEGER (0..64)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifid the pending group number this vlan belonges to."
REFERENCE
""
DEFVAL { 0 }
::= { rldot1sMstpVlanEntry 3 }
--
-- rldot1sMstpExtPortTable
--
rldot1sMstpExtPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF Rldot1sMstpExtPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table that contains MSTP information about ports of the CIST."
::= { rldot1sMstp 7 }
rldot1sMstpExtPortEntry OBJECT-TYPE
SYNTAX Rldot1sMstpExtPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of information maintained by every port
of the CIST."
INDEX { rldot1sMstpExtPortPort }
::= { rldot1sMstpExtPortTable 1 }
Rldot1sMstpExtPortEntry ::= SEQUENCE {
rldot1sMstpExtPortPort INTEGER,
rldot1sMstpExtPortInternalPathCost INTEGER,
rldot1sMstpExtPortDesignatedRegionalRoot BridgeId,
rldot1sMstpExtPortDesignatedRegionalCost INTEGER
}
rldot1sMstpExtPortPort OBJECT-TYPE
SYNTAX INTEGER (1..4096)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The port number of the port for which this entry
contains Spanning Tree Protocol management
information."
REFERENCE
"IEEE 802.1t/D2-1999: Section 9.2.6"
::= { rldot1sMstpExtPortEntry 1 }
rldot1sMstpExtPortInternalPathCost OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The contribution of this port to the path cost of
paths towards the spanning tree regional root which
include this port. 802.1D-1990 recommends that the
default value of this parameter be in inverse
proportion to the speed of the attached LAN."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.5.3"
::= { rldot1sMstpExtPortEntry 2 }
rldot1sMstpExtPortDesignatedRegionalRoot OBJECT-TYPE
SYNTAX BridgeId
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unique Bridge Identifier of the Bridge
recorded as the Root in the Configuration BPDUs
transmitted by the Designated Bridge for the
segment to which the port is attached."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.5.4"
::= { rldot1sMstpExtPortEntry 3 }
rldot1sMstpExtPortDesignatedRegionalCost OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The regional path cost of the Designated Port of the
segment connected to this port. This value is
compared to the Root Path Cost field in received
bridge PDUs."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.5.5"
::= { rldot1sMstpExtPortEntry 4 }
rldot1sMstpDesignatedMaxHopes OBJECT-TYPE
SYNTAX INTEGER (1..20)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Max number of hopes that an MST BPDU will travel inside a region."
::= { rldot1sMstp 8 }
rldot1sMstpRegionalRoot OBJECT-TYPE
SYNTAX BridgeId
ACCESS read-only
STATUS mandatory
DESCRIPTION
"CIST Regional Root Identifier (13.16.4).
The Bridge Identifier of the current CIST Regional Root."
REFERENCE
"IEEE 802.1S-2002: Section 13.16.4"
::= { rldot1sMstp 9 }
rldot1sMstpRegionalRootCost OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The CIST path cost from the transmitting Bridge to the
CIST Regional Root."
REFERENCE
"IEEE 802.1S-2002: Section 12.8.1.1.3"
::= { rldot1sMstp 10 }
rldot1sMstpPendingConfigurationName OBJECT-TYPE
SYNTAX SnmpAdminString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The pending configuration name."
::= { rldot1sMstp 11 }
rldot1sMstpPendingRevisionLevel OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The pending revision level."
DEFVAL { 0 }
::= { rldot1sMstp 12 }
rldot1sMstpPendingAction OBJECT-TYPE
SYNTAX INTEGER {
copyPendingActive(1),
copyActivePending(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The action to be done with the pending configuration.
copyPendingActive - to copy the pending mst configuration to the active one.
copyActivePending - to copy the active mst configuration to the pending one. "
::= { rldot1sMstp 13 }
rldot1dTpAgingTime OBJECT IDENTIFIER ::= { rlpBridgeMIBObjects 7 }
rldot1dTpAgingTimeMin OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The min timeout period in seconds for aging out
dynamically learned forwarding information."
REFERENCE
"P802.1d/D9, July 14, 1989: Section 6.7.1.1.3"
::= { rldot1dTpAgingTime 1 }
rldot1dTpAgingTimeMax OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The max timeout period in seconds for aging out
dynamically learned forwarding information."
REFERENCE
"P802.1d/D9, July 14, 1989: Section 6.7.1.1.3"
::= { rldot1dTpAgingTime 2 }
rlTelnet OBJECT IDENTIFIER ::= { rnd 58 }
rlTelnetMibVersion OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"MIB's version, the current version is 1."
::= { rlTelnet 1 }
rlTelnetPassword OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..20))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Telnet Password"
::= { rlTelnet 2 }
rlTelnetTimeout OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The number of minutes after which the TCP connection is closed
if no activity is detected from the Client"
DEFVAL {0}
::= { rlTelnet 3 }
rlTelnetUsersTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlTelnetUsersEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table hold information about current telnet sessions"
::= { rlTelnet 4 }
rlTelnetUsersEntry OBJECT-TYPE
SYNTAX RlTelnetUsersEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The row definition for this table."
INDEX { rlTelnetSessionId }
::= { rlTelnetUsersTable 1 }
RlTelnetUsersEntry ::= SEQUENCE {
rlTelnetSessionId INTEGER,
rlTelnetSessionClientAddress IpAddress,
rlTelnetSessionLoginTime DisplayString,
rlTelnetSessionStatus INTEGER
}
rlTelnetSessionId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Telnet Session ID"
::= { rlTelnetUsersEntry 1 }
rlTelnetSessionClientAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Telnet Session Client IP address"
::= { rlTelnetUsersEntry 2 }
rlTelnetSessionLoginTime OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Telnet Session Login Time string"
::= { rlTelnetUsersEntry 3 }
rlTelnetSessionStatus OBJECT-TYPE
SYNTAX INTEGER {
connected(1),
disconnect(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Telnet Session status. After status has been set to diconnect the
sessions is closed and the matching entry is deleted from the table."
::= { rlTelnetUsersEntry 4 }
rlTelnetLoginBanner OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Telnet Login Banner. When telnet connection is established,
the banner is the concatanation of this MIB and rlTelnetSecondLoginBanner."
::= { rlTelnet 5 }
rlTelnetSecondLoginBanner OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Telnet Login Banner Extension. When telnet connection is established,
the banner is the concatanation of rlTelnetLoginBanner and this MIB"
::= { rlTelnet 6 }
rlPolicy OBJECT IDENTIFIER ::= { rnd 59 }
rlArpSpoofing OBJECT IDENTIFIER ::= { rnd 60 }
rlArpSpoofingMibVersion OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"MIB's version, the current version is 1."
::= { rlArpSpoofing 1 }
rlArpSpoofingTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlArpSpoofingEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of the ifIndexes, IP addresses and corresponding MAC addresses."
::= { rlArpSpoofing 2 }
rlArpSpoofingEntry OBJECT-TYPE
SYNTAX RlArpSpoofingEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry of this table specifis ifIndex,IP Address and
MAC address."
INDEX { rlArpSpoofingIfIndex, rlArpSpoofingLocalIpAddr }
::= { rlArpSpoofingTable 1 }
RlArpSpoofingEntry ::= SEQUENCE {
rlArpSpoofingIfIndex InterfaceIndex,
rlArpSpoofingLocalIpAddr IpAddress,
rlArpSpoofingMacAddr PhysAddress,
rlArpSpoofingRemoteIpAddr IpAddress,
rlArpSpoofingOutPhysIfIndex InterfaceIndexOrZero,
rlArpSpoofingStatus RowStatus
}
rlArpSpoofingIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The physical interface for which this entry contains information."
::= { rlArpSpoofingEntry 1 }
rlArpSpoofingLocalIpAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Ip addres for which the device will send ARP reply (ARP spoofing)."
::= { rlArpSpoofingEntry 2 }
rlArpSpoofingMacAddr OBJECT-TYPE
SYNTAX PhysAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"MAC addres with which the device will send ARP reply.
If the field is ommited or its value 0.0.0.0 the device will
send with the interface's MAC address."
::= { rlArpSpoofingEntry 3 }
rlArpSpoofingRemoteIpAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Ip addres for which the device will send periodically ARP requests
if its value differs from 0.0.0.0."
::= { rlArpSpoofingEntry 4 }
rlArpSpoofingOutPhysIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The physical interface to which the device will send periodically
ARP requests if its value differs from 0. If its value is 0 then ARP
requests will send to all the VLAN's ports."
DEFVAL { 0 }
::= { rlArpSpoofingEntry 5 }
rlArpSpoofingStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"It is used to insert, update or delete an entry"
::= { rlArpSpoofingEntry 6 }
rlMir OBJECT IDENTIFIER ::= { rnd 61 }
rlMirMibVersion OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"MIB's version, the current version is 1."
::= { rlMir 1 }
rlMirMaxNumOfMRIsAfterReset OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The maximun instanses of IP Multi Instance Routers after the
following reset."
DEFVAL { 1 }
::= { rlMir 2 }
rlMirMaxNumOfMRIs OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximun instanses of IP Multi Instance Routers."
::= { rlMir 3 }
rlMirCurMriNum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The number of the MRI of which MIB variables are treated at
the same time by the SNMP agent."
::= { rlMir 4 }
rlMirInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlMirInterfaceEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of the assignment ifinterfaces to IP Router instances."
::= { rlMir 5 }
rlMirInterfaceEntry OBJECT-TYPE
SYNTAX RlMirInterfaceEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry of this table specifies the MRID assignement to a L2
interfrace."
INDEX { rlMirInterfaceIfIndex }
::= { rlMirInterfaceTable 1 }
RlMirInterfaceEntry ::= SEQUENCE {
rlMirInterfaceIfIndex InterfaceIndex,
rlMirInterfaceMrid INTEGER
}
rlMirInterfaceIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The L2 interface for which this entry contains information."
::= { rlMirInterfaceEntry 1 }
rlMirInterfaceMrid OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Multi IP Router Instance Identifier to which the
interface is assgned."
DEFVAL { 0 }
::= { rlMirInterfaceEntry 2 }
rlMirVlanBaseReservedPortsTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlMirVlanBaseReservedPortsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list VLAN based reserved physical ports."
::= { rlMir 6 }
rlMirVlanBaseReservedPortsEntry OBJECT-TYPE
SYNTAX RlMirVlanBaseReservedPortsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A VLAN based reserved physical port."
INDEX { rlMirVlanBaseReservedPortsIfIndex }
::= { rlMirVlanBaseReservedPortsTable 1 }
RlMirVlanBaseReservedPortsEntry ::= SEQUENCE {
rlMirVlanBaseReservedPortsIfIndex InterfaceIndex,
rlMirVlanBaseReservedPortsStatus RowStatus
}
rlMirVlanBaseReservedPortsIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
ACCESS read-write
STATUS mandatory
DESCRIPTION
"IfIndex of VLAN based reserved physical port."
::= { rlMirVlanBaseReservedPortsEntry 1 }
rlMirVlanBaseReservedPortsStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"It is used to delete an entry"
::= { rlMirVlanBaseReservedPortsEntry 2 }
rlMirVlanBaseLogicalPortsTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlMirVlanBaseLogicalPortsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list VLAN based logical ports."
::= { rlMir 7 }
rlMirVlanBaseLogicalPortsEntry OBJECT-TYPE
SYNTAX RlMirVlanBaseLogicalPortsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A VLAN based logical point-to-point port."
INDEX { rlMirVlanBaseLogicalPortsIfIndex }
::= { rlMirVlanBaseLogicalPortsTable 1 }
RlMirVlanBaseLogicalPortsEntry ::= SEQUENCE {
rlMirVlanBaseLogicalPortsIfIndex InterfaceIndex,
rlMirVlanBaseLogicalPortsReservedIfIndex InterfaceIndex,
rlMirVlanBaseLogicalPortsVlanTag INTEGER,
rlMirVlanBaseLogicalPortsStatus RowStatus
}
rlMirVlanBaseLogicalPortsIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
ACCESS read-write
STATUS mandatory
DESCRIPTION
"IfIndex of VLAN based Logical point-to-point port."
::= { rlMirVlanBaseLogicalPortsEntry 1 }
rlMirVlanBaseLogicalPortsReservedIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
ACCESS read-write
STATUS mandatory
DESCRIPTION
"IfIndex of VLAN based reserved physical port on which the logical
port is defined."
::= { rlMirVlanBaseLogicalPortsEntry 2 }
rlMirVlanBaseLogicalPortsVlanTag OBJECT-TYPE
SYNTAX INTEGER (1..4095)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"VLAN tag."
::= { rlMirVlanBaseLogicalPortsEntry 3 }
rlMirVlanBaseLogicalPortsStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"It is used to add, update and delete an entry"
::= { rlMirVlanBaseLogicalPortsEntry 4 }
rlMirModel OBJECT-TYPE
SYNTAX INTEGER {none(0),
vbm(1),
gm(2),
oob(3)}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the multi-instance model of the device"
::= { rlMir 8 }
ipMRouteStdMIB OBJECT IDENTIFIER ::= { rnd 62 }
rl3sw2swTables OBJECT IDENTIFIER ::= { rnd 63 }
rl3sw2swTablesPollingInterval OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The polling interval for dynamic 3SW/2SW tables in seconds."
DEFVAL { 3 }
::= { rl3sw2swTables 1 }
rlGvrp OBJECT IDENTIFIER ::= { rnd 64 }
rlPortGvrpTimersTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlPortGvrpTimersEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of GVRP timer values for every bridge
port. This is indexed by dot1dBasePort."
::= { rlGvrp 1 }
rlPortGvrpTimersEntry OBJECT-TYPE
SYNTAX RlPortGvrpTimersEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"GVRP timer values for a bridge port."
INDEX { dot1dBasePort }
::= { rlPortGvrpTimersTable 1 }
RlPortGvrpTimersEntry ::=
SEQUENCE {
rlPortGvrpJoinTime TimeInterval,
rlPortGvrpLeaveTime TimeInterval,
rlPortGvrpLeaveAllTime TimeInterval,
rlPortGvrpOverrideGarp EnabledStatus
}
rlPortGvrpJoinTime OBJECT-TYPE
SYNTAX TimeInterval
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The GVRP Join time, in centiseconds."
DEFVAL { 20 }
::= { rlPortGvrpTimersEntry 1 }
rlPortGvrpLeaveTime OBJECT-TYPE
SYNTAX TimeInterval
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The GVRP Leave time, in centiseconds."
DEFVAL { 60 }
::= { rlPortGvrpTimersEntry 2 }
rlPortGvrpLeaveAllTime OBJECT-TYPE
SYNTAX TimeInterval
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The GVRP LeaveAll time, in centiseconds."
DEFVAL { 1000 }
::= { rlPortGvrpTimersEntry 3 }
rlPortGvrpOverrideGarp OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"If enabled{1}, GVRP timer values for this port are
determined by the values in this entry. Otherwise, they
are determined by the values in dot1dPortGarpTable."
DEFVAL { disabled }
::= { rlPortGvrpTimersEntry 4 }
rlGvrpSupported OBJECT-TYPE
SYNTAX TruthValue
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Is GVRP supported in this device or not"
::= { rlGvrp 2 }
rlGvrpMibVersion OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"MIB's version, the current version is 3."
::= { rlGvrp 3 }
-- rlPortGvrpStatisticsTable
rlPortGvrpStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlPortGvrpStatisticsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of GVRP statistics values for every bridge
port. This is indexed by dot1dBasePort."
::= { rlGvrp 4 }
rlPortGvrpStatisticsEntry OBJECT-TYPE
SYNTAX RlPortGvrpStatisticsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"GVRP statistics values for a bridge port."
INDEX { dot1dBasePort }
::= { rlPortGvrpStatisticsTable 1 }
RlPortGvrpStatisticsEntry ::=
SEQUENCE {
rlPortGvrpStatisticsRJE Counter,
rlPortGvrpStatisticsRJIn Counter,
rlPortGvrpStatisticsREmp Counter,
rlPortGvrpStatisticsRLIn Counter,
rlPortGvrpStatisticsRLE Counter,
rlPortGvrpStatisticsRLA Counter,
rlPortGvrpStatisticsSJE Counter,
rlPortGvrpStatisticsSJIn Counter,
rlPortGvrpStatisticsSEmp Counter,
rlPortGvrpStatisticsSLIn Counter,
rlPortGvrpStatisticsSLE Counter,
rlPortGvrpStatisticsSLA Counter,
rlPortGvrpStatisticsClear INTEGER
}
rlPortGvrpStatisticsRJE OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of Join Empty Received on the port,
since the last clearance."
::= { rlPortGvrpStatisticsEntry 1 }
rlPortGvrpStatisticsRJIn OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of Join In Received on the port,
since the last clearance."
::= { rlPortGvrpStatisticsEntry 2 }
rlPortGvrpStatisticsREmp OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of Empty Received on the port,
since the last clearance."
::= { rlPortGvrpStatisticsEntry 3 }
rlPortGvrpStatisticsRLIn OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of Leave In Received on the port,
since the last clearance."
::= { rlPortGvrpStatisticsEntry 4 }
rlPortGvrpStatisticsRLE OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of Leave Empty Received on the port,
since the last clearance."
::= { rlPortGvrpStatisticsEntry 5 }
rlPortGvrpStatisticsRLA OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of Leave All Received on the port,
since the last clearance."
::= { rlPortGvrpStatisticsEntry 6 }
rlPortGvrpStatisticsSJE OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of Join Empty Sent on the port,
since the last clearance."
::= { rlPortGvrpStatisticsEntry 7 }
rlPortGvrpStatisticsSJIn OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of Join In Sent on the port,
since the last clearance."
::= { rlPortGvrpStatisticsEntry 8 }
rlPortGvrpStatisticsSEmp OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of Empty Sent on the port,
since the last clearance."
::= { rlPortGvrpStatisticsEntry 9 }
rlPortGvrpStatisticsSLIn OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of Leave In Sent on the port,
since the last clearance."
::= { rlPortGvrpStatisticsEntry 10 }
rlPortGvrpStatisticsSLE OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of Leave Empty Sent on the port,
since the last clearance."
::= { rlPortGvrpStatisticsEntry 11 }
rlPortGvrpStatisticsSLA OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of Leave All Sent on the port,
since the last clearance."
::= { rlPortGvrpStatisticsEntry 12 }
rlPortGvrpStatisticsClear OBJECT-TYPE
SYNTAX INTEGER {
activate(1),
passive(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"activate - the signal/trigger to clear ALL
the rlPortGvrpStatisticsEntry's fields.
passive - specify that the rlPortGvrpStatisticsClear field is not
activate, or finshed the clearnce process.
the rlPortGvrpStatisticsClear return automatically to
passive after it was activate."
DEFVAL { passive }
::= { rlPortGvrpStatisticsEntry 13 }
-- rlPortGvrpErrorStatisticsTable
rlPortGvrpErrorStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlPortGvrpErrorStatisticsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of GVRP ErrorStatistics values for every bridge
port. This is indexed by dot1dBasePort."
::= { rlGvrp 5 }
rlPortGvrpErrorStatisticsEntry OBJECT-TYPE
SYNTAX RlPortGvrpErrorStatisticsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"GVRP ErrorStatistics values for a bridge port."
INDEX { dot1dBasePort }
::= { rlPortGvrpErrorStatisticsTable 1 }
RlPortGvrpErrorStatisticsEntry ::=
SEQUENCE {
rlPortGvrpErrorStatisticsInvProt Counter,
rlPortGvrpErrorStatisticsInvAtyp Counter,
rlPortGvrpErrorStatisticsInvAval Counter,
rlPortGvrpErrorStatisticsInvPlen Counter,
rlPortGvrpErrorStatisticsInvAlen Counter,
rlPortGvrpErrorStatisticsInvEvent Counter,
rlPortGvrpErrorStatisticsClear INTEGER
}
rlPortGvrpErrorStatisticsInvProt OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of Invalid Protocol Id encountered by
the GVRP port. (since the last clearance)"
::= { rlPortGvrpErrorStatisticsEntry 1 }
rlPortGvrpErrorStatisticsInvAtyp OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of Invalid Attribute Type encountered by
the GVRP port. (since the last clearance)"
::= { rlPortGvrpErrorStatisticsEntry 2 }
rlPortGvrpErrorStatisticsInvAval OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of Invalid Attribute Value encountered by
the GVRP port. (since the last clearance)"
::= { rlPortGvrpErrorStatisticsEntry 3 }
rlPortGvrpErrorStatisticsInvPlen OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of Invalid PDU Length encountered by
the GVRP port. (since the last clearance)"
::= { rlPortGvrpErrorStatisticsEntry 4 }
rlPortGvrpErrorStatisticsInvAlen OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of Invalid Attribute Length encountered by
the GVRP port. (since the last clearance)"
::= { rlPortGvrpErrorStatisticsEntry 5 }
rlPortGvrpErrorStatisticsInvEvent OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of Invalid Event encountered by
the GVRP port. (since the last clearance)"
::= { rlPortGvrpErrorStatisticsEntry 6 }
rlPortGvrpErrorStatisticsClear OBJECT-TYPE
SYNTAX INTEGER {
activate(1),
passive(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"activate - the signal/trigger to clear ALL
the rlPortGvrpErrorStatisticsEntry's fields.
passive - specify that the rlPortGvrpErrorStatisticsClear field is not
activate, or finshed the clearnce process.
the rlPortGvrpErrorStatisticsClear return automatically to
passive after it was activate."
DEFVAL { passive }
::= { rlPortGvrpErrorStatisticsEntry 7 }
-- rlPortGvrpApplicantStatusTable
rlPortGvrpApplicantStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlPortGvrpApplicantStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of GVRP Applicant Status values for every bridge
port. This is indexed by dot1dBasePort."
::= { rlGvrp 6 }
rlPortGvrpApplicantStatusEntry OBJECT-TYPE
SYNTAX RlPortGvrpApplicantStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"GVRP Applicant Status value for a bridge port."
INDEX { dot1dBasePort }
::= { rlPortGvrpApplicantStatusTable 1 }
RlPortGvrpApplicantStatusEntry ::=
SEQUENCE {
rlPortGvrpApplicantStatusValue INTEGER
}
rlPortGvrpApplicantStatusValue OBJECT-TYPE
SYNTAX INTEGER {
participant(1),
nonParticipant(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"participant - the Gvrp enabled port sending GARP PDUs.
nonParticipant - preventing the Gvrp enabled port from sending GARP PDUs."
DEFVAL { participant }
::= { rlPortGvrpApplicantStatusEntry 1 }
-- rlGvrpDynamicVlanCreation was deleted
-- { rlGvrp 7 } reserved
-- rlPortGvrpRegistrationModeTable
rlPortGvrpRegistrationModeTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlPortGvrpRegistrationModeEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of GVRP Registration Mode values for every bridge
port. This is indexed by dot1dBasePort."
::= { rlGvrp 8 }
rlPortGvrpRegistrationModeEntry OBJECT-TYPE
SYNTAX RlPortGvrpRegistrationModeEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"GVRP Registration Mode value for a bridge port."
INDEX { dot1dBasePort }
::= { rlPortGvrpRegistrationModeTable 1 }
RlPortGvrpRegistrationModeEntry ::=
SEQUENCE {
rlPortGvrpRegistrationModeForbidden TruthValue
}
rlPortGvrpRegistrationModeForbidden OBJECT-TYPE
SYNTAX TruthValue
ACCESS read-write
STATUS mandatory
DESCRIPTION
"true - deregisters all VLANS on the specified port and prevents any
VLAN creation or registration on that port.
false - the registration operation on this port behaves normally."
DEFVAL { false }
::= { rlPortGvrpRegistrationModeEntry 1 }
rlDot3adAgg OBJECT IDENTIFIER ::= { rnd 65 }
rlDot3adAggMibVersion OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"MIB's version, the current version is 1."
::= { rlDot3adAgg 1 }
--
-- rlDot3adAggBalanceTable
--
rlDot3adAggBalanceTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlDot3adAggBalanceEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry of this table specifies a balancing criterion used
for the corresponding dot3adAggIndex."
::= { rlDot3adAgg 2 }
rlDot3adAggBalanceEntry OBJECT-TYPE
SYNTAX RlDot3adAggBalanceEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of information for each dot3adAggIndex."
INDEX { dot3adAggIndex, rlDot3adAggBalanceForwardType }
::= { rlDot3adAggBalanceTable 1 }
RlDot3adAggBalanceEntry ::= SEQUENCE {
rlDot3adAggBalanceForwardType INTEGER,
rlDot3adAggBalanceLayer INTEGER,
rlDot3adAggBalanceUsedAddresses INTEGER,
rlDot3adAggBalanceBroadcastType INTEGER
}
rlDot3adAggBalanceForwardType OBJECT-TYPE
SYNTAX INTEGER {
bridging(1),
routing(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A Forwarding type: Bridging or Routing."
::= { rlDot3adAggBalanceEntry 1 }
rlDot3adAggBalanceLayer OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A Network Layer Number, may have the following values: 2, 3 or 4.
The default value is:
Bridging: 2
Routing: 3."
::= { rlDot3adAggBalanceEntry 2 }
rlDot3adAggBalanceUsedAddresses OBJECT-TYPE
SYNTAX INTEGER {
notApplied(0),
dstAddr(1),
srcAddr(2),
dstAndSrcAddr(3),
vlanId(4),
ethType(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the Network Layer addresses used for Balancing of
unicast frames.
The function sets the criterion (by layer and used address in it)."
DEFVAL { dstAddr }
::= { rlDot3adAggBalanceEntry 3 }
rlDot3adAggBalanceBroadcastType OBJECT-TYPE
SYNTAX INTEGER {
common(0),
dedicated(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies a balancing criterion used for L2 broadcast and unknown
frames:
common:
a link allocated for broadcast and unknown frames is used
for unicast frames too
dedicated:
a link allocated for broadcast and unknown frames is not used
for unicast frames"
DEFVAL { common }
::= { rlDot3adAggBalanceEntry 4 }
rlDot3adAggNumOfTrunks OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of trunks supported by the device."
::= { rlDot3adAgg 3 }
rlDot3adAggMaxPortsInTrunks OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximun number of ports in a trunk."
::= { rlDot3adAgg 4 }
rlDot3adAggTrunkCreationSupport OBJECT-TYPE
SYNTAX INTEGER {
notSupported(0),
supportsTrunkOrLacp(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies if there is support to rldot3adAggCreationTable,
and the type of the support:
supportedTrunkOrLacp - ports that are members in some trunk
are belongs to it by manual configuration or by lacp,
but not togther.
notSupported - there is not support to rldot3adAggCreationTable."
::= { rlDot3adAgg 5 }
--
-- rlDot3adAggCreationTable
--
rlDot3adAggCreationTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlDot3adAggCreationEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry of this table is for creation of an aggregator
for the corresponding dot3adAggIndex, when the value of the
rlDot3adAggCreationSupport is diffrent from notSupported."
::= { rlDot3adAgg 6 }
rlDot3adAggCreationEntry OBJECT-TYPE
SYNTAX RlDot3adAggCreationEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An information for each dot3adAggIndex."
INDEX { dot3adAggIndex }
::= { rlDot3adAggCreationTable 1 }
RlDot3adAggCreationEntry ::= SEQUENCE {
rlDot3adAggCreationTrunk TruthValue,
rlDot3adAggCreationLacp TruthValue
}
rlDot3adAggCreationTrunk OBJECT-TYPE
SYNTAX TruthValue
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The aggregator can aggregate ports in manual configuration."
::= { rlDot3adAggCreationEntry 1 }
rlDot3adAggCreationLacp OBJECT-TYPE
SYNTAX TruthValue
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The aggregator can aggregate ports by lacp."
::= { rlDot3adAggCreationEntry 2 }
rlDot3adAggLoadBalancingPerTrunk OBJECT-TYPE
SYNTAX TruthValue
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Specifies if load balancing is defined per trunk
or per device."
::= { rlDot3adAgg 7 }
--
-- rlDot3adAggPortLacpTable
--
rlDot3adAggPortLacpTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlDot3adAggPortLacpEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry of this table specifies lacp protocol state and
statistics for the corresponding dot3adAggPortIndex."
::= { rlDot3adAgg 8 }
rlDot3adAggPortLacpEntry OBJECT-TYPE
SYNTAX RlDot3adAggPortLacpEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of information for each dot3adAggPortIndex."
INDEX { dot3adAggPortIndex }
::= { rlDot3adAggPortLacpTable 1 }
RlDot3adAggPortLacpEntry ::= SEQUENCE {
rlDot3adAggPortLacpPdusRx Counter-32,
rlDot3adAggPortLacpPDUsTx Counter-32,
rlDot3adAggPortLacpRxState INTEGER,
rlDot3adAggPortLacpMuxState INTEGER,
rlDot3adAggPortLacpPeriodicState INTEGER,
rlDot3adAggPortLacpSelected INTEGER,
rlDot3adAggPortLacpReady TruthValue,
rlDot3adAggPortLacpPortMoved TruthValue,
rlDot3adAggPortLacpNNT TruthValue,
rlDot3adAggPortLacpPeriodicTxTimer INTEGER,
rlDot3adAggPortLacpCurrentWhileTimer INTEGER,
rlDot3adAggPortLacpWaitWhileTimer INTEGER
}
rlDot3adAggPortLacpPdusRx OBJECT-TYPE
SYNTAX Counter-32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of valid LACPDUs received on this
Aggregation Port. This value is read-only."
::= { rlDot3adAggPortLacpEntry 1 }
rlDot3adAggPortLacpPDUsTx OBJECT-TYPE
SYNTAX Counter-32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of LACPDUs transmitted on this
Aggregation Port. This value is read-only."
::= { rlDot3adAggPortLacpEntry 2 }
rlDot3adAggPortLacpRxState OBJECT-TYPE
SYNTAX INTEGER {
current(1),
expired(2),
defaulted(3),
initialize(4),
portDisabled(5),
lacpDisabled(6)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute holds the value 'current' if the Receive
state machine for the Aggregation Port is in the
CURRENT state, 'expired' if the Receive state machine
is in the EXPIRED state, 'defaulted' if the Receive state
machine is in the DEFAULTED state, 'initialize' if the
Receive state machine is in the INITIALIZE state,
'portDisabled' if the Receive state machine is in the
PORT_DISABLED state, or 'lacpDisabled' if the Receive state
machine is in the LACP_DISABLED state.
This value is read-only."
::= { rlDot3adAggPortLacpEntry 3 }
rlDot3adAggPortLacpMuxState OBJECT-TYPE
SYNTAX INTEGER {
detached(1),
waiting(2),
attached(3),
collecting(4),
distributing(5),
collectingDistributing(6)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute holds the value 'detached' if the Mux
state machine for the Aggregation Port is
in the DETACHED state, 'waiting' if the Mux state machine
is in the WAITING state, 'attached' if the Mux state
machine for the Aggregation Port is in the ATTACHED
state, 'collecting' if the Mux state machine for the
Aggregation Port is in the COLLECTING state, 'distributing'
if the Mux state machine for the Aggregation Port is
in the DISTRIBUTING state, and 'collecting_ distributing'
if the Mux state machine for the Aggregation Port is in
the COLLECTING_DISTRIBUTING state.
This value is read-only."
::= { rlDot3adAggPortLacpEntry 4 }
rlDot3adAggPortLacpPeriodicState OBJECT-TYPE
SYNTAX INTEGER {
noPeriodic(1),
fastPeriodic(2),
slowPeriodic(3),
periodicTx(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute holds the value 'noPeriodic' if the Periodic
state machine for the Aggregation Port is
in the NO_PERIODIC state, 'fastPeriodic' if the Mux state machine
is in the FAST_PERIODIC state, 'slowPeriodic' if the Mux state
machine for the Aggregation Port is in the SLOW_PERIODIC
state, or 'periodicTx' if the Periodic state machine
for the Aggregation Port is in the PERIODIC_TX state.
This value is read-only."
::= { rlDot3adAggPortLacpEntry 5 }
rlDot3adAggPortLacpSelected OBJECT-TYPE
SYNTAX INTEGER {
unselected(1),
selected(2),
waiting(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute holds the value 'unselected' if the Selected variable
for the Aggregation Port is set to UNSELECTED, 'selected' if the
Selected variable for the Aggregation Port is set to SELECTED,
or 'waiting' if the Selected variable for the Aggregation Port
is set to WAITING.
This value is read-only."
::= { rlDot3adAggPortLacpEntry 6 }
rlDot3adAggPortLacpReady OBJECT-TYPE
SYNTAX TruthValue
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A read-only Boolean value indicating whether the
Aggregation Port is in the WAITING state in the Mux state machine
and its wait_while_timer has expired ('TRUE').
otherwise, its valus is 'FALSE'."
::= { rlDot3adAggPortLacpEntry 7 }
rlDot3adAggPortLacpPortMoved OBJECT-TYPE
SYNTAX TruthValue
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A read-only Boolean value indicating whether the
Partner_Oper_System or Partner_Oper_Port_Number in use by the
Aggregation Port has been changed in an incoming LACPDU ('TRUE').
otherwise, its valus is 'FALSE'."
::= { rlDot3adAggPortLacpEntry 8 }
rlDot3adAggPortLacpNNT OBJECT-TYPE
SYNTAX TruthValue
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A read-only Boolean value indicating whether there is a new protocol
information that should be transmitted on the link, or that the Partner
needs to be reminded of the old information.
otherwise, its valus is 'FALSE'."
::= { rlDot3adAggPortLacpEntry 9 }
rlDot3adAggPortLacpPeriodicTxTimer OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The amount of time in seconds remaining before the Periodeic Tx timer
will expire.
This value is read-only."
::= { rlDot3adAggPortLacpEntry 10 }
rlDot3adAggPortLacpCurrentWhileTimer OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The amount of time in seconds remaining before the Current While timer
will expire.
This value is read-only."
::= { rlDot3adAggPortLacpEntry 11 }
rlDot3adAggPortLacpWaitWhileTimer OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The amount of time in seconds remaining before the Wait While timer
will expire.
This value is read-only."
::= { rlDot3adAggPortLacpEntry 12 }
rlDot3adAggLacpMembershipRestrictionsSupport OBJECT-TYPE
SYNTAX TruthValue
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies if there is support to
rlDot3adAggLacpMembershipRestrictionsTable."
::= { rlDot3adAgg 9 }
--
-- rlDot3adAggLacpMembershipRestrictionsTable
--
rlDot3adAggLacpMembershipRestrictionsTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlDot3adAggLacpMembershipRestrictionsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry of this table specifies membership restrictions
for ports that lacp is enbaled on them, and try to attach to
the corresponding dot3adAggIndex."
::= { rlDot3adAgg 10 }
rlDot3adAggLacpMembershipRestrictionsEntry OBJECT-TYPE
SYNTAX RlDot3adAggLacpMembershipRestrictionsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of information for each dot3adAggIndex."
INDEX { dot3adAggIndex }
::= { rlDot3adAggLacpMembershipRestrictionsTable 1 }
RlDot3adAggLacpMembershipRestrictionsEntry ::= SEQUENCE {
rlDot3adAggLacpMembershipRestrictionsPartnerAdminKey Unsigned-32,
rlDot3adAggLacpMembershipRestrictionsSpeedAdminMode Unsigned-32,
rlDot3adAggLacpMembershipRestrictionsPartnerAdminSystemId PhysAddress,
rlDot3adAggLacpMembershipRestrictionsPartnerAdminSystemPriority Unsigned-32,
rlDot3adAggLacpMembershipRestrictionsIndividualAggregator TruthValue
}
rlDot3adAggLacpMembershipRestrictionsPartnerAdminKey OBJECT-TYPE
SYNTAX Unsigned-32 (0.. 65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable specifies the administrative key
of the remote LACP aggregator.
A value of 0 is returned if the value of the variable
hasn't been set."
DEFVAL { 0 }
::= { rlDot3adAggLacpMembershipRestrictionsEntry 1 }
rlDot3adAggLacpMembershipRestrictionsSpeedAdminMode OBJECT-TYPE
SYNTAX Unsigned-32
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable specifies the required speed of the LACP aggregator
in bits per second.
A value of 10 is returned for 10G.
A value of 0 is returned if the value of the variable
hasn't been set."
DEFVAL { 0 }
::= { rlDot3adAggLacpMembershipRestrictionsEntry 2 }
rlDot3adAggLacpMembershipRestrictionsPartnerAdminSystemId OBJECT-TYPE
SYNTAX PhysAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable specifies the administrative MAC Address
of the remote LACP aggregator.
A null mac address is returned if the value of the variable
hasn't been set."
::= { rlDot3adAggLacpMembershipRestrictionsEntry 3 }
rlDot3adAggLacpMembershipRestrictionsPartnerAdminSystemPriority OBJECT-TYPE
SYNTAX Unsigned-32 (0.. 65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable specifies the administrative System Priority
of the remote LACP aggregator.
A value of 0 is returned if the value of the variable
hasn't been set."
DEFVAL { 0 }
::= { rlDot3adAggLacpMembershipRestrictionsEntry 4 }
rlDot3adAggLacpMembershipRestrictionsIndividualAggregator OBJECT-TYPE
SYNTAX TruthValue
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable specifies if the lacp aggregator represents an
Aggregate ('FALSE') or an Individual link ('TRUE')."
DEFVAL { false }
::= { rlDot3adAggLacpMembershipRestrictionsEntry 5 }
rlEmbWeb OBJECT IDENTIFIER ::= { rnd 66 }
rlEmWebMibVersion OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Embedded web version, the current version is 1."
::= { rlEmbWeb 1 }
rlEmWebWebSite OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Link for the vendor web site used to retrive information."
::= { rlEmbWeb 2 }
rlEmWebSecurityTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlEmWebSecurityEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Security Table whose entry is composed of username and
Password, group and access privileges for each user.
The access privileges can be one or more of none, read-files,
read-write, and super."
::= { rlEmbWeb 3 }
rlEmWebSecurityEntry OBJECT-TYPE
SYNTAX RlEmWebSecurityEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The row definition for this table."
INDEX { rlEmWebSecurityUserName }
::= { rlEmWebSecurityTable 1 }
RlEmWebSecurityEntry ::= SEQUENCE {
rlEmWebSecurityUserName DisplayString,
rlEmWebSecurityPassword DisplayString,
rlEmWebSecurityAccess INTEGER,
rlEmWebSecurityIpAddr IpAddress,
rlEmWebSecurityPort INTEGER,
rlEmWebSecuritySnmpVersion INTEGER,
rlEmWebSecurityStatus RowStatus
}
rlEmWebSecurityUserName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..16))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The User name."
::= { rlEmWebSecurityEntry 1 }
rlEmWebSecurityPassword OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..16))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The User password."
::= { rlEmWebSecurityEntry 2 }
rlEmWebSecurityAccess OBJECT-TYPE
SYNTAX INTEGER {
none(1),
readOnly(2),
readWrite(3),
super(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Access rights for this user ."
::= { rlEmWebSecurityEntry 3 }
rlEmWebSecurityIpAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"IP Address to send the traps to.0 means doesn't want
to receive traps."
::= { rlEmWebSecurityEntry 4 }
rlEmWebSecurityPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Port to send the traps to."
::= { rlEmWebSecurityEntry 5 }
rlEmWebSecuritySnmpVersion OBJECT-TYPE
SYNTAX INTEGER {
ver1(1),
ver2(2),
ver3(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"SNMP version supported by this user. For the agent use."
::= { rlEmWebSecurityEntry 6 }
rlEmWebSecurityStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The status of the security table entry. It's used to delete an entry"
::= { rlEmWebSecurityEntry 7 }
rlEmWebCloseTimeout OBJECT-TYPE
SYNTAX INTEGER (1..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable defines the maximum time period
in seconds that a TCP connection can stay open
without depending on the TCP timeout mechanism"
DEFVAL { 30 }
::= { rlEmbWeb 5 }
rlEmWebReceiveTimeout OBJECT-TYPE
SYNTAX INTEGER (1..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable defines the maximum time period
in seconds that a TCP connection can wait for
data which hasn't arrived "
DEFVAL { 30 }
::= { rlEmbWeb 6 }
rlEmWebMaxIdleTimeout OBJECT-TYPE
SYNTAX INTEGER (1..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable defines the maximum Idle time
period in seconds for a TCP connection.If another request
isn't made at this period, the connection is closed "
DEFVAL { 30 }
::= { rlEmbWeb 7 }
rlEmWebSetEWSfilesStatus OBJECT-TYPE
SYNTAX INTEGER {
opened (1),
closed (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable sets the status of the embedded Web Server
files to either closed or opened."
DEFVAL { opened }
::= { rlEmbWeb 8 }
rlEmbeddedWebApplied OBJECT-TYPE
SYNTAX TruthValue
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Specifies if the device supports Embedded WEB:
true - suppotrs
false - does not support"
::= { rlEmbWeb 9 }
rlEmWebHttpPort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the TCP port the embedded web uses for HTTP sessions."
::= { rlEmbWeb 10 }
rlEmWebHttpEnable OBJECT-TYPE
SYNTAX TruthValue
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/Disable HTTP sessions"
::= { rlEmbWeb 11 }
rlEmWebHttpsPort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the TCP port the embedded web uses for HTTPS sessions."
::= { rlEmbWeb 12 }
rlEmWebHttpsEnable OBJECT-TYPE
SYNTAX TruthValue
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/Disable HTTPS sessions"
::= { rlEmbWeb 13 }
rlEmWebCertificateCountryName OBJECT-TYPE
SYNTAX DisplayString (SIZE(2))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Value of country name field that will appear when a new certificate is generated."
::= { rlEmbWeb 14 }
rlEmWebCertificateStateOrProvinceName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..128))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Value of state or province name field that will appear when a new certificate is generated."
::= { rlEmbWeb 15 }
rlEmWebCertificateLocalityName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..64))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Value of locality field that will appear when a new certificate is generated."
::= { rlEmbWeb 16 }
rlEmWebCertificateOrganizationName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..64))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Value of organization field that will appear when a new certificate is generated."
::= { rlEmbWeb 17 }
rlEmWebCertificateCommonName OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Value of common name field that will appear when a new certificate is generated."
::= { rlEmbWeb 19 }
rlEmWebCertificateRegenerate OBJECT-TYPE
SYNTAX INTEGER {
noAction(0),
regenerateCertificate(1),
regenerateRsaKeyAndCertificate(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting to a regenerateCertificate causes a new certifiacte to be generated and to be used for all new sessions."
::= { rlEmbWeb 20 }
rlEmWebRsaKeyLength OBJECT-TYPE
SYNTAX INTEGER (512..2048)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting the RSA key size that will be created when rlEmWebRegenerateCertificateAndKey will be
set to regenerateCertificateAndKey."
::= { rlEmbWeb 21 }
rlEmWebDebug OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"MIB variable for setting debug information."
::= { rlEmbWeb 22 }
rlEmWebURL OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The URL through which the EWS of this device can be accessed."
::= { rlEmbWeb 23 }
rlEmWebDisplayNonPresentEntities OBJECT-TYPE
SYNTAX TruthValue
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object indicates whether the EWS is required to display non-present entities
(like non-present ports, IP addresses on non-present ports etc.) on it's screens."
::= { rlEmbWeb 24 }
rlEmWebCertificateExists OBJECT-TYPE
SYNTAX TruthValue
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object indicates whether a certificate has been generated."
::= { rlEmbWeb 25 }
rlSwPackageVersion OBJECT IDENTIFIER ::= { rnd 67 }
rlSwPackageVersionTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlSwPackageVersionEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The table listing the current versions of packages
that are included in the running software."
::= { rlSwPackageVersion 1 }
rlSwPackageVersionEntry OBJECT-TYPE
SYNTAX RlSwPackageVersionEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The row definition for this table."
INDEX {IMPLIED rlSwPackageVersionName }
::= { rlSwPackageVersionTable 1 }
RlSwPackageVersionEntry ::= SEQUENCE {
rlSwPackageVersionName DisplayString,
rlSwPackageVersionVesrion DisplayString
}
rlSwPackageVersionName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..20))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Package name."
::= { rlSwPackageVersionEntry 1 }
rlSwPackageVersionVesrion OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..20))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Package version."
::= { rlSwPackageVersionEntry 2 }
rlBroadcom OBJECT IDENTIFIER ::= { rnd 68 }
rlMultiSessionTerminal OBJECT IDENTIFIER ::= { rnd 69 }
rlTerminalDebugModePassword OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..20))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"When a user wants to change the terminal mode
from debug mode to ASCII he must enter this password first"
::= { rlMultiSessionTerminal 1 }
rlRCli OBJECT IDENTIFIER ::= { rnd 70 }
rlRCliMibVersion OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"MIB's version, the current version is 1."
::= { rlRCli 1 }
rlRCliUserPassword OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"RCLI User mode Password"
::= { rlRCli 2 }
rlRCliEnablePassword OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"RCLI Enable mode Password"
::= { rlRCli 3 }
rlRCliConfigPassword OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"RCLI Config mode Password"
::= { rlRCli 4 }
rlRCliTimer OBJECT-TYPE
SYNTAX INTEGER (5..3600)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"RCLI Timeout"
::= { rlRCli 5 }
rlRcliFileAction OBJECT-TYPE
SYNTAX INTEGER {
notUsedAfterReset(1),
usedAfterReset (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"RCLI Configuration File action determines whether
The device configuration after reset will be set by
the configuration file content or not."
::= { rlRCli 6 }
rlBgp OBJECT IDENTIFIER ::= { rnd 71 }
rlBgpMibVersion OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"BGP4 Mib version, the current version is 1."
::= { rlBgp 1 }
rlBgpPeersExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlBgpPeersExtEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"BGP peer table. Contains one entry per BGP peer,
information about the connections with BGP peers."
::= { rlBgp 2 }
rlBgpPeersExtEntry OBJECT-TYPE
SYNTAX RlBgpPeersExtEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Entry containing information about the connection with
a BGP peer. "
AUGMENTS { bgpPeerEntry }
::= { rlBgpPeersExtTable 1 }
RlBgpPeersExtEntry ::= SEQUENCE {
rlBgpPeersExtRowStatus RowStatus,
rlBgpPeersExtIsReflectorClient INTEGER,
rlBgpPeersExtInConfederation TruthValue,
rlBgpPeersExtRemAS INTEGER
}
rlBgpPeersExtRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The row status variable, used according to installation
and removal conventions for conceptual rows. Setting this
object to active(1) or createAndGo(4) results in the
addition of the remote address of the peer.
Destroying the entry or setting it to notInService(2)
removes the remote address associated with the peer.
The use of other values is implementation-dependent."
DEFVAL { active }
::= { rlBgpPeersExtEntry 1 }
rlBgpPeersExtIsReflectorClient OBJECT-TYPE
SYNTAX INTEGER {
nonClient(0),
client(1),
meshedClient(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value indicates whether the given peer is a
reflector client of this router, or not.
A value of client indicates that this peer is a
reflector client that is not fully meshed with
other reflector clients. A value of meshedClient
indicates that the peer is a reflector client and
is fully meshed with all other clients because
there is no route reflection. The default value
is meshedClient."
DEFVAL { meshedClient }
::= { rlBgpPeersExtEntry 2 }
rlBgpPeersExtInConfederation OBJECT-TYPE
SYNTAX TruthValue
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value indicates whether the given peer is in
our confederation or not."
DEFVAL { false }
::= { rlBgpPeersExtEntry 3 }
rlBgpPeersExtRemAS OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The remote autonomous system number which is configurable."
DEFVAL { 0 }
::= { rlBgpPeersExtEntry 4 }
rlBgpClusterId OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The configured Cluster-ID of the local router. A
value of 0.0.0.0 indicates the absence of this
value."
::= { rlBgp 3 }
rlBgpConfederationId OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The local Confederation Identification
Number. A value of zero (0) indicates the
absence of this value."
::= { rlBgp 4 }
rlBgpEnable OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value indicates whether BGP is enable on
this router or not."
::={ rlBgp 5 }
rlBgpRouteReflectionEnable OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value indicates whether route reflection extension is enable on
this router or not."
::={ rlBgp 6 }
rlBgpASConfederationEnable OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value indicates whether AS confederation extension is enable on
this router or not."
::={ rlBgp 7 }
rlBgpRouteFlapDampeningEnable OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value indicates whether route flap dampening extension is enable
on this router or not."
::={ rlBgp 8 }
rlBgpCommunitiesEnable OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value indicates whether BGP communities extension is enable on
this router or not."
::={ rlBgp 9 }
rlBgpCapabilNegotEnable OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value indicates whether BGP capabilities negotiation extension
is enable on this router or not."
::={ rlBgp 10 }
rlBgpMedConf OBJECT-TYPE
SYNTAX INTEGER (-1..2147483647)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The configured Multi-Exit Descriminator of the local router.
A value of -1 indicates the absence of this attribute."
::= { rlBgp 11 }
rlBgpLocalPrefConf OBJECT-TYPE
SYNTAX INTEGER (-1..2147483647)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The configured Local Preference of the local router.
A value of -1 indicates the absence of this attribute."
::= { rlBgp 12 }
rlBgpLocalAsConf OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The local autonomous system number, which is
configurable."
::= { rlBgp 13 }
rlBgp4PathAttrExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlBgp4PathAttrExtEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The BGP-4 Received Path Attribute Table contains
information about paths to destination networks
received from all BGP4 peers."
::= { rlBgp 14 }
rlBgp4PathAttrExtEntry OBJECT-TYPE
SYNTAX RlBgp4PathAttrExtEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Information about a path to a network."
AUGMENTS { bgp4PathAttrEntry }
::= { rlBgp4PathAttrExtTable 1 }
RlBgp4PathAttrExtEntry ::= SEQUENCE {
rlBgp4PathAttrOriginatorId IpAddress,
rlBgp4PathAttrClusterList OCTET STRING,
rlBgp4PathAttrCommunities OCTET STRING
}
rlBgp4PathAttrOriginatorId OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Originator-ID identifying the router that initially
advertised this destination to a Route Reflector. A
value of 0.0.0.0 indicates the absence of this attribute.
This attribute is defined in [RFC2796]."
::= { rlBgp4PathAttrExtEntry 1 }
rlBgp4PathAttrClusterList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..4096))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A sequence of four octet long values representing the
reflection path that the route has passed. Each four
octet long value represents the ID of a cluster that
the route has traversed. A length of zero (0) indicates
the absence of this attribute. This attribute is defined
in [RFC2796]."
::= { rlBgp4PathAttrExtEntry 2 }
rlBgp4PathAttrCommunities OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..4096))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A sequence of four octet long values representing the
community that was received with the route. The values
of each of the individual octets may have semantic meaning.
A length of zero (0) indicates the absence of this attribute.
This attribute is defined in [RFC1997]."
::= { rlBgp4PathAttrExtEntry 3 }
rlBgpSuppressLimit OBJECT-TYPE
SYNTAX INTEGER (1..20000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A numeric value that is compared with the penalty. If the penalty
is greater than the suppress limit, the route is suppressed.
Default value is 2000."
::= { rlBgp 15 }
rlBgpReuseLimit OBJECT-TYPE
SYNTAX INTEGER (1..20000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A configurable numeric value that is compared with the penalty.
If the penalty is less than the reuse limit, a suppressed route
that is up will no longer be suppressed. Default value is 750."
::= { rlBgp 16 }
rlBgpHalfLifeTime OBJECT-TYPE
SYNTAX INTEGER (1..45)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A configurable numeric value that describes the time required to
reduce the penalty by one half. Default value is 15."
::= { rlBgp 17 }
rlBgpMaxSuppressTime OBJECT-TYPE
SYNTAX INTEGER (1..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A configurable numeric value that describes the maximum time a
route can be suppressed no matter how unstable it has been prior
to this period ofstability. Default value is 4*rlBgpHalfLifeTime."
::= { rlBgp 18 }
rlAgentsCapabilitiesGroups OBJECT IDENTIFIER ::= { rnd 72 }
rlAggregateVlan OBJECT IDENTIFIER ::= {rnd 73}
rlAggregateVlanMibVersion OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"MIB's version, the current version is 1."
::= { rlAggregateVlan 1 }
rlAggregateVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlAggregateVlanEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The table creates an aggregateVlans, the IfIndex is from 10000"
::= { rlAggregateVlan 2 }
rlAggregateVlanEntry OBJECT-TYPE
SYNTAX RlAggregateVlanEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The row definition for this table."
INDEX { rlAggregateVlanIndex }
::= { rlAggregateVlanTable 1 }
RlAggregateVlanEntry ::= SEQUENCE {
rlAggregateVlanIndex InterfaceIndex,
rlAggregateVlanName DisplayString,
rlAggregateVlanPhysAddressType INTEGER,
rlAggregateVlanStatus RowStatus
}
rlAggregateVlanIndex OBJECT-TYPE
SYNTAX InterfaceIndex
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This index indicate the aggrigateVlan id, the aggregate
vlan index is starting from 10000 "
::= { rlAggregateVlanEntry 1 }
rlAggregateVlanName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The name of the aggregateVlan "
DEFVAL {""}
::= { rlAggregateVlanEntry 2 }
rlAggregateVlanPhysAddressType OBJECT-TYPE
SYNTAX INTEGER {
default(1),
reserve(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" This variable indicates whether the physical address assigned to this
VLAN should be the default one or be chosen from the set of
reserved physical addresses of the device."
DEFVAL{default}
::= { rlAggregateVlanEntry 3}
rlAggregateVlanStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The status of the aggregateVlan table entry. It's used to delete an entry"
::= { rlAggregateVlanEntry 4}
rlAggregateSubVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlAggregateSubVlanEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The table indicates all the allocated sub-vlans to the
aggregateVlans, an entry in the rlAggregateVlanTable must
be exist before allocating the subVlans"
::= { rlAggregateVlan 3 }
rlAggregateSubVlanEntry OBJECT-TYPE
SYNTAX RlAggregateSubVlanEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The row definition for this table."
INDEX { rlAggregateVlanIndex, rlAggregateSubVlanIfIndex }
::= { rlAggregateSubVlanTable 1 }
RlAggregateSubVlanEntry ::= SEQUENCE {
rlAggregateSubVlanIfIndex InterfaceIndex,
rlAggregateSubVlanStatus RowStatus
}
rlAggregateSubVlanIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicate the subVlan that allocated to the aggregate vlan"
::= { rlAggregateSubVlanEntry 1}
rlAggregateSubVlanStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The status of the aggregateSubVlan table entry.
It's used to delete an entry"
::= { rlAggregateSubVlanEntry 2}
rlAggregateVlanArpProxy OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"When ARP Proxy is enabled, the router can respond to
ARP requests for nodes located on different sub-vlans,
which belong to the same Super VLAN.The router responds
with its own MAC address.
When ARP Proxy is disabled, the router responds only
to ARP requests for its own IP addresses."
DEFVAL { disable }
::= { rlAggregateVlan 4 }
rlLCli OBJECT IDENTIFIER ::= { rnd 74 }
rlLCliMibVersion OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"MIB's version, the current version is 2."
::= { rlLCli 1 }
rlLCliTimeout OBJECT-TYPE
SYNTAX Unsigned-32
ACCESS read-write
STATUS mandatory
DESCRIPTION
"LCLI Timeout indicates the interval in seconds, that
the system waits until user input is detected."
DEFVAL {600}
::= { rlLCli 2 }
rlLCliHistoryEnable OBJECT-TYPE
SYNTAX TruthValue
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates if command history function is supported."
DEFVAL {true}
::= { rlLCli 3 }
rlLCliHistorySize OBJECT-TYPE
SYNTAX Unsigned-32 (0..256)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates number of commands that the system will record
in its history buffer."
DEFVAL {10}
::= { rlLCli 4 }
rlLcliCommandLevelTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlLcliCommandLevelEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This Table maps a CLI command to its level. "
::= { rlLCli 5 }
rlLcliCommandLevelEntry OBJECT-TYPE
SYNTAX RlLcliCommandLevelEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The row definition for this table."
INDEX {rlLcliCommandLevelCommandName,
rlLcliCommandLevelContextName }
::= { rlLcliCommandLevelTable 1 }
RlLcliCommandLevelEntry ::= SEQUENCE {
rlLcliCommandLevelCommandName DisplayString,
rlLcliCommandLevelContextName DisplayString,
rlLcliCommandLevelInsertTime TimeTicks,
rlLcliCommandLevelCommandLevel INTEGER,
rlLcliCommandLevelActionMode INTEGER,
rlLcliCommandLevelStatus RowStatus
}
rlLcliCommandLevelCommandName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The CLI command name "
::= { rlLcliCommandLevelEntry 1 }
rlLcliCommandLevelContextName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The CLI context ID which the command name is associated with "
::= { rlLcliCommandLevelEntry 2 }
rlLcliCommandLevelInsertTime OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The time elapsed until this entry was created."
::= { rlLcliCommandLevelEntry 3 }
rlLcliCommandLevelCommandLevel OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The level which is associated with the command name "
::= { rlLcliCommandLevelEntry 4 }
rlLcliCommandLevelActionMode OBJECT-TYPE
SYNTAX INTEGER {
set (1),
reset (2),
setAll (3),
resetAll (4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The level action which is associated with the command name "
DEFVAL { set }
::= { rlLcliCommandLevelEntry 5 }
rlLcliCommandLevelStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The status of the commandLevel table entry. "
::= { rlLcliCommandLevelEntry 6 }
rlLCliSshTimeout OBJECT-TYPE
SYNTAX Unsigned-32
ACCESS read-write
STATUS mandatory
DESCRIPTION
"LCLI Timeout indicates the interval in seconds, that
the system waits until user input is detected on SSH LCLI."
DEFVAL {600}
::= { rlLCli 6 }
rlLCliTelnetTimeout OBJECT-TYPE
SYNTAX Unsigned-32
ACCESS read-write
STATUS mandatory
DESCRIPTION
"LCLI Timeout indicates the interval in seconds, that
the system waits until user input is detected on telnet LCLI."
DEFVAL {600}
::= { rlLCli 7 }
rlGmrp OBJECT IDENTIFIER ::= { rnd 75 }
rlGmrpSupported OBJECT-TYPE
SYNTAX TruthValue
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Is Gmrp supported in the device or not."
::= { rlGmrp 1 }
rlGmrpMibVersion OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"MIB's version, the current version is 1."
::= { rlGmrp 2 }
rlPortGmrpTimersTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlPortGmrpTimersEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of Gmrp timer values for every bridge
port. This is indexed by dot1dBasePort."
::= { rlGmrp 3 }
rlPortGmrpTimersEntry OBJECT-TYPE
SYNTAX RlPortGmrpTimersEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Gmrp timer values for a bridge port."
INDEX { dot1dBasePort }
::= { rlPortGmrpTimersTable 1 }
RlPortGmrpTimersEntry ::=
SEQUENCE {
rlPortGmrpJoinTime TimeInterval,
rlPortGmrpLeaveTime TimeInterval,
rlPortGmrpLeaveAllTime TimeInterval,
rlPortGmrpOverrideGarp EnabledStatus
}
rlPortGmrpJoinTime OBJECT-TYPE
SYNTAX TimeInterval
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The Gmrp Join time, in centiseconds."
DEFVAL { 20 }
::= { rlPortGmrpTimersEntry 1 }
rlPortGmrpLeaveTime OBJECT-TYPE
SYNTAX TimeInterval
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The Gmrp Leave time, in centiseconds."
DEFVAL { 60 }
::= { rlPortGmrpTimersEntry 2 }
rlPortGmrpLeaveAllTime OBJECT-TYPE
SYNTAX TimeInterval
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The Gmrp LeaveAll time, in centiseconds."
DEFVAL { 1000 }
::= { rlPortGmrpTimersEntry 3 }
rlPortGmrpOverrideGarp OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"If enabled{1}, Gmrp timer values for this port are
determined by the values in this entry. Otherwise, they
are determined by the values in dot1dPortGarpTable."
DEFVAL { disabled }
::= { rlPortGmrpTimersEntry 4 }
rlGmrpVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlGmrpVlanEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table is to Enable/Disable Gmrp in the vlan."
::= { rlGmrp 4 }
rlGmrpVlanEntry OBJECT-TYPE
SYNTAX RlGmrpVlanEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the rlGmrpVlanTable."
INDEX { rlGmrpVlanTag }
::= { rlGmrpVlanTable 1 }
RlGmrpVlanEntry ::= SEQUENCE {
rlGmrpVlanTag INTEGER,
rlGmrpVlanEnable TruthValue
}
rlGmrpVlanTag OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The tag of the VLAN for which this entry contains information."
::= { rlGmrpVlanEntry 1 }
rlGmrpVlanEnable OBJECT-TYPE
SYNTAX TruthValue
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/Disable Gmrp in the vlan."
DEFVAL { false }
::= { rlGmrpVlanEntry 2 }
rlDhcpCl OBJECT IDENTIFIER ::= { rnd 76 }
-- rlDhcpCl 1,2 saved for future use
rlDhcpClActionTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlDhcpClActionEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" The (conceptual) table mentione IP address which must be
released/renewed on the interface."
::= { rlDhcpCl 3 }
rlDhcpClActionEntry OBJECT-TYPE
SYNTAX RlDhcpClActionEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry (conceptual row) in dhcpClActionTable."
INDEX { rlDhcpClActionIfIndex }
::= { rlDhcpClActionTable 1 }
RlDhcpClActionEntry ::= SEQUENCE {
rlDhcpClActionIfIndex InterfaceIndex,
rlDhcpClActionStatus RowStatus,
rlDhcpClActionHostName SnmpAdminString
}
rlDhcpClActionIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The interface which the action is implemented for
or NULL if it implemented for all device. "
::= { rlDhcpClActionEntry 1 }
rlDhcpClActionStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The status of this entry. Creating the entry renewing Dhcp
address on the interface; destroying the entry release Dhcp
address on the interface."
::= { rlDhcpClActionEntry 2}
rlDhcpClActionHostName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..20))
ACCESS read-write
STATUS mandatory
DESCRIPTION
" This option specifies the name of the client."
::= { rlDhcpClActionEntry 3 }
rlStormCtrl OBJECT IDENTIFIER ::= { rnd 77 }
rlStormCtrlSupport OBJECT-TYPE
SYNTAX TruthValue
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Identify if the strom control protection is supported"
::= { rlStormCtrl 1 }
rlStormCtrlMibVersion OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"MIB's version, the current version is 2."
::= { rlStormCtrl 2 }
rlStormCtrlRateUnitTypeSupport OBJECT-TYPE
-- SYNTAX BITS {
-- packetsPerSecond(0),
-- bytesPerSecond(1),
-- framesPerBuffer(2),
-- percentages(3),
-- kiloBytesPerSecond(4)
-- }
SYNTAX OCTET STRING (SIZE(1))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"the supported rate unit type for the storm rate control"
::= { rlStormCtrl 3 }
rlStormCtrlTypeSupport OBJECT-TYPE
-- SYNTAX BITS {
-- unknownUnicast(0),
-- unknownMulticast(1),
-- broadcast(2),
-- multicast(3),
-- }
SYNTAX OCTET STRING (SIZE(1))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"the supported frame type for the storm control protection"
::= { rlStormCtrl 4 }
rlStormCtrlRateSupportPerType OBJECT-TYPE
-- SYNTAX BITS {
-- unknownUnicast(0),
-- unknownMulticast(1),
-- broadcast(2),
-- multicast(3),
-- }
SYNTAX OCTET STRING (SIZE(1))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"identify if rate control is supported for each frame type"
::= { rlStormCtrl 5 }
rlStormCtrlEnbaleDependencyBetweenTypes OBJECT-TYPE
-- SYNTAX BITS {
-- unknownUnicast(0),
-- unknownMulticast(1),
-- broadcast(2),
-- multicast(3),
-- }
SYNTAX OCTET STRING (SIZE(1))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"indicate enable limitation of dependency between frame types,
such as enabling of multicast should be with the enabling of
broadcast type (bcm 5632)"
::= { rlStormCtrl 6 }
rlStormCtrlRateDependencyBetweenTypes OBJECT-TYPE
-- SYNTAX BITS {
-- unknownUnicast(0),
-- unknownMulticast(1),
-- broadcast(2),
-- multicast(3),
-- }
SYNTAX OCTET STRING (SIZE(1))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"indicate limitation of dependency between frame types for
rate assignment, for example: assigning of rate limit for unicast
frame must assigning the same rate for multicast and bradcast
frame (bcm 5615), in case the device support enbale per each frame
type but with the same rate limitation."
::= { rlStormCtrl 7 }
--
-- rlStormCtrlTable
--
rlStormCtrlTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlStormCtrlEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The table contains the storm control protection per port"
::= { rlStormCtrl 8 }
rlStormCtrlEntry OBJECT-TYPE
SYNTAX RlStormCtrlEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"storm control protection, defined per port,frame type and rate"
INDEX { dot1dBasePort }
::= { rlStormCtrlTable 1 }
RlStormCtrlEntry ::= SEQUENCE {
rlStormCtrlRateType RlStormCtrlRateUnit,
rlStormCtrlUnknownUnicastEnable TruthValue,
rlStormCtrlUnknownUnicastRate Unsigned-32,
rlStormCtrlUnknownMulticastEnable TruthValue,
rlStormCtrlUnknownMulticastRate Unsigned-32,
rlStormCtrlBroadcastEnable TruthValue,
rlStormCtrlBroadcastRate Unsigned-32,
rlStormCtrlMulticastEnable TruthValue,
rlStormCtrlMulticastRate Unsigned-32,
rlStormCtrlSetDefaultRateType TruthValue,
rlStormCtrlSetDefaultUnknownUnicastEnable TruthValue,
rlStormCtrlSetDefaultUnknownUnicastRate TruthValue,
rlStormCtrlSetDefaultUnknownMulticastEnable TruthValue,
rlStormCtrlSetDefaultUnknownMulticastRate TruthValue,
rlStormCtrlSetDefaultBroadcastEnable TruthValue,
rlStormCtrlSetDefaultBroadcastRate TruthValue,
rlStormCtrlSetDefaultMulticastEnable TruthValue,
rlStormCtrlSetDefaultMulticastRate TruthValue
}
rlStormCtrlRateType OBJECT-TYPE
SYNTAX RlStormCtrlRateUnit
ACCESS read-write
STATUS mandatory
DESCRIPTION
"indicate the rate unit type"
::= { rlStormCtrlEntry 1 }
rlStormCtrlUnknownUnicastEnable OBJECT-TYPE
SYNTAX TruthValue
ACCESS read-write
STATUS mandatory
DESCRIPTION
"enable or disable the storm control for unknown unicast frames"
DEFVAL { false }
::= { rlStormCtrlEntry 2 }
rlStormCtrlUnknownUnicastRate OBJECT-TYPE
SYNTAX Unsigned-32
ACCESS read-write
STATUS mandatory
DESCRIPTION
"set the storm control rate limit for the unknown unicast frames,
0 indicate blocking of frames from this type."
DEFVAL { 0 }
::= { rlStormCtrlEntry 3 }
rlStormCtrlUnknownMulticastEnable OBJECT-TYPE
SYNTAX TruthValue
ACCESS read-write
STATUS mandatory
DESCRIPTION
"enable or disable the storm control for unknown multicast frames"
DEFVAL { false }
::= { rlStormCtrlEntry 4 }
rlStormCtrlUnknownMulticastRate OBJECT-TYPE
SYNTAX Unsigned-32
ACCESS read-write
STATUS mandatory
DESCRIPTION
"set the storm control rate limit for the unknown multicast frames,
0 indicate blocking of frames from this type."
DEFVAL { 0 }
::= { rlStormCtrlEntry 5 }
rlStormCtrlBroadcastEnable OBJECT-TYPE
SYNTAX TruthValue
ACCESS read-write
STATUS mandatory
DESCRIPTION
"enable or disable the storm control for Broadcast frames"
DEFVAL { false }
::= { rlStormCtrlEntry 6 }
rlStormCtrlBroadcastRate OBJECT-TYPE
SYNTAX Unsigned-32
ACCESS read-write
STATUS mandatory
DESCRIPTION
"set the storm control rate limit for the Broadcast frames,
0 indicate blocking of frames from this type."
DEFVAL { 0 }
::= { rlStormCtrlEntry 7 }
rlStormCtrlMulticastEnable OBJECT-TYPE
SYNTAX TruthValue
ACCESS read-write
STATUS mandatory
DESCRIPTION
"enable or disable the storm control for multicast frames"
DEFVAL { false }
::= { rlStormCtrlEntry 8 }
rlStormCtrlMulticastRate OBJECT-TYPE
SYNTAX Unsigned-32
ACCESS read-write
STATUS mandatory
DESCRIPTION
"set the storm control rate limit for the multicast frames,
0 indicate blocking of frames from this type."
DEFVAL { 0 }
::= { rlStormCtrlEntry 9 }
rlStormCtrlSetDefaultRateType OBJECT-TYPE
SYNTAX TruthValue
ACCESS read-write
STATUS mandatory
DESCRIPTION
"indicate if return the rate unit type to its default."
DEFVAL { false }
::= { rlStormCtrlEntry 10 }
rlStormCtrlSetDefaultUnknownUnicastEnable OBJECT-TYPE
SYNTAX TruthValue
ACCESS read-write
STATUS mandatory
DESCRIPTION
"indicate if return the storm control enable for unknown unicast frames
to its default."
DEFVAL { false }
::= { rlStormCtrlEntry 11 }
rlStormCtrlSetDefaultUnknownUnicastRate OBJECT-TYPE
SYNTAX TruthValue
ACCESS read-write
STATUS mandatory
DESCRIPTION
"indicate if return the storm control rate limit for the unknown unicast frames
to its default."
DEFVAL { false }
::= { rlStormCtrlEntry 12 }
rlStormCtrlSetDefaultUnknownMulticastEnable OBJECT-TYPE
SYNTAX TruthValue
ACCESS read-write
STATUS mandatory
DESCRIPTION
"indicate if return the storm control enable for unknown multicast frames
to its default."
DEFVAL { false }
::= { rlStormCtrlEntry 13 }
rlStormCtrlSetDefaultUnknownMulticastRate OBJECT-TYPE
SYNTAX TruthValue
ACCESS read-write
STATUS mandatory
DESCRIPTION
"indicate if return the storm control rate limit for the unknown multicast frames
to its default."
DEFVAL { false }
::= { rlStormCtrlEntry 14 }
rlStormCtrlSetDefaultBroadcastEnable OBJECT-TYPE
SYNTAX TruthValue
ACCESS read-write
STATUS mandatory
DESCRIPTION
"indicate if return the storm control enable for Broadcast frames
to its default."
DEFVAL { false }
::= { rlStormCtrlEntry 15 }
rlStormCtrlSetDefaultBroadcastRate OBJECT-TYPE
SYNTAX TruthValue
ACCESS read-write
STATUS mandatory
DESCRIPTION
"indicate if return the storm control rate limit for the Broadcast frames
to its default."
DEFVAL { false }
::= { rlStormCtrlEntry 16 }
rlStormCtrlSetDefaultMulticastEnable OBJECT-TYPE
SYNTAX TruthValue
ACCESS read-write
STATUS mandatory
DESCRIPTION
"indicate if return the storm control for multicast frames
to its default."
DEFVAL { false }
::= { rlStormCtrlEntry 17 }
rlStormCtrlSetDefaultMulticastRate OBJECT-TYPE
SYNTAX TruthValue
ACCESS read-write
STATUS mandatory
DESCRIPTION
"indicate if return the storm control rate limit for the multicast frames
to its default."
DEFVAL { false }
::= { rlStormCtrlEntry 18 }
--
-- rlStormCtrlGroupTable
--
rlStormCtrlGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlStormCtrlGroupEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The table contains per port for each supported frame type
to which group it belongs."
::= { rlStormCtrl 9 }
rlStormCtrlGroupEntry OBJECT-TYPE
SYNTAX RlStormCtrlGroupEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"group id for each supported frame type defined per port."
INDEX { dot1dBasePort }
::= { rlStormCtrlGroupTable 1 }
RlStormCtrlGroupEntry ::= SEQUENCE {
rlStormCtrlGroupUnknownUnicastId INTEGER,
rlStormCtrlGroupUnknownMulticastId INTEGER,
rlStormCtrlGroupBroadcastId INTEGER,
rlStormCtrlGroupMulticastId INTEGER
}
rlStormCtrlGroupUnknownUnicastId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the id of the group for unknown unicast frame type that
the port belongs to,
0 indicates that unknown unicast frame type is not supported."
::= { rlStormCtrlGroupEntry 1 }
rlStormCtrlGroupUnknownMulticastId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the id of the group for unknown multicast frame type that
the port belongs to,
0 indicates that unknown multicast frame type is not supported."
::= { rlStormCtrlGroupEntry 2 }
rlStormCtrlGroupBroadcastId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the id of the group for broadcast frame type that
the port belongs to,
0 indicates that broadcast frame type is not supported."
::= { rlStormCtrlGroupEntry 3 }
rlStormCtrlGroupMulticastId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the id of the group for multicast frame type that
the port belongs to,
0 indicates that multicast frame type is not supported."
::= { rlStormCtrlGroupEntry 4 }
rlSsh OBJECT IDENTIFIER ::= { rnd 78 }
rlAAA OBJECT IDENTIFIER ::= { rnd 79 }
rlRadius OBJECT IDENTIFIER ::= { rnd 80 }
-- see rlAAA.mib
rlTraceRoute OBJECT IDENTIFIER ::= { rnd 81 }
rlTraceRouteMibVersion OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"MIB's version, the current version is 1."
::= { rlTraceRoute 1 }
rlSyslog OBJECT IDENTIFIER ::= { rnd 82 }
rlEnv OBJECT IDENTIFIER ::= { rnd 83 }
-- rlPhysicalDescription OBJECT IDENTIFIER ::= { rlEnv 1 }
-- entitySensorMIB OBJECT IDENTIFIER ::= { rlEnv 2 }
rlSmon OBJECT IDENTIFIER ::= { rnd 84 }
rlPortCopyMibVersion OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"MIB's version, the current version is 1."
::= { rlSmon 1 }
rlPortCopySupport OBJECT-TYPE
SYNTAX INTEGER {
supported(1),
notSupported(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"supported - The standard portCopy is supported.
notSupported - the standard portCopy is not supported.
only basic portCopy operation is supported. "
::= { rlSmon 2 }
rlSocket OBJECT IDENTIFIER ::= { rnd 85 }
rlSocketMibVersion OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"MIB's version, the current version is 1."
::= { rlSocket 1 }
rlSocketTable OBJECT-TYPE
SYNTAX
SEQUENCE OF RlSocketEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The (conceptual) table listing the sockets which are currently
open in the system."
::= { rlSocket 2 }
rlSocketEntry OBJECT-TYPE
SYNTAX RlSocketEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry (conceptual row) in the SocketTable."
INDEX { rlSocketId }
::= { rlSocketTable 1 }
RlSocketEntry ::= SEQUENCE {
rlSocketId INTEGER,
rlSocketType INTEGER,
rlSocketState INTEGER,
rlSocketBlockMode INTEGER,
rlSocketUpTime TimeTicks
}
rlSocketId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of the id of the socket. "
::= { rlSocketEntry 1 }
rlSocketType OBJECT-TYPE
SYNTAX INTEGER {
stream(1),
dgram(2),
raw(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Specifies the type of the socket. "
::= { rlSocketEntry 2 }
rlSocketState OBJECT-TYPE
SYNTAX INTEGER {
connected(1),
notConnected(2),
recvClosed(3),
sendClosed(4),
closed(5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Specifies the state in which the socket is in. "
::= { rlSocketEntry 3 }
rlSocketBlockMode OBJECT-TYPE
SYNTAX INTEGER {
blocking(1),
nonBlocking(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Specifies the blocking mode of the socket. "
::= { rlSocketEntry 4 }
rlSocketUpTime OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The time elapsed since this socket was created."
::= { rlSocketEntry 5 }
rlDigitalKeyManage OBJECT IDENTIFIER ::= { rnd 86 }
rlMD5KeyChainTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlMD5KeyChainEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Key-chains and key ID's"
::= { rlDigitalKeyManage 1 }
rlMD5KeyChainEntry OBJECT-TYPE
SYNTAX RlMD5KeyChainEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Key-chain with key ID that belongs to this chain"
INDEX {rlMD5KeyChainName, rlMD5KeyChainKeyId}
::= { rlMD5KeyChainTable 1 }
RlMD5KeyChainEntry ::= SEQUENCE {
rlMD5KeyChainName DisplayString,
rlMD5KeyChainKeyId INTEGER,
rlMD5KeyChainKeyRowStatus RowStatus
}
rlMD5KeyChainName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Name of the key-chain to which belongs
the secret authentication key"
::= { rlMD5KeyChainEntry 1 }
rlMD5KeyChainKeyId OBJECT-TYPE
SYNTAX INTEGER (1..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A 8-bit identifier for the secret authentication key.
This identifier is the same as key ID used in rlMD5KeyTable."
::= { rlMD5KeyChainEntry 2 }
rlMD5KeyChainKeyRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"It is used to insert, update or delete an entry"
::= { rlMD5KeyChainEntry 3 }
rlMD5KeyTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlMD5KeyEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Secret authentication keys
used by MD5 Authentication Algorithm"
::= { rlDigitalKeyManage 2 }
rlMD5KeyEntry OBJECT-TYPE
SYNTAX RlMD5KeyEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Secret authentication key with all related parameters"
INDEX {rlMD5KeyId}
::= { rlMD5KeyTable 1 }
RlMD5KeyEntry ::= SEQUENCE {
rlMD5KeyId INTEGER,
rlMD5Key DisplayString,
rlMD5KeyStartAccept DateAndTime,
rlMD5KeyStartGenerate DateAndTime,
rlMD5KeyStopGenerate DateAndTime,
rlMD5KeyStopAccept DateAndTime,
rlMD5KeyRowStatus RowStatus
}
rlMD5KeyId OBJECT-TYPE
SYNTAX INTEGER (1..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A 8-bit identifier for the secret authentication key"
::= { rlMD5KeyEntry 1 }
rlMD5Key OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..16))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The 128-bit secret authentication key.
The key can get value only once and cannot be modified.
When read, rlMD5KeyChainKey always returns an
Octet String of length zero."
::= { rlMD5KeyEntry 2 }
rlMD5KeyStartAccept OBJECT-TYPE
SYNTAX DateAndTime
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The time that the router will start accepting packets
that have been created with the given key"
DEFVAL { '00000000'H }
::= { rlMD5KeyEntry 3 }
rlMD5KeyStartGenerate OBJECT-TYPE
SYNTAX DateAndTime
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The time that the router will start using the key
for packet generation"
DEFVAL { '00000000'H }
::= { rlMD5KeyEntry 4 }
rlMD5KeyStopGenerate OBJECT-TYPE
SYNTAX DateAndTime
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The time that the router will stop using the key
for packet generation"
DEFVAL { 'FFFFFFFF'H }
::= { rlMD5KeyEntry 5 }
rlMD5KeyStopAccept OBJECT-TYPE
SYNTAX DateAndTime
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The time that the router will stop accepting packets
that have been created with the given key"
DEFVAL { 'FFFFFFFF'H }
::= { rlMD5KeyEntry 6 }
rlMD5KeyRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"It is used to insert, update or delete an entry"
::= { rlMD5KeyEntry 7 }
rlCopy OBJECT IDENTIFIER ::= { rnd 87 }
rlQosCliMib OBJECT IDENTIFIER ::= { rnd 88 }
rlMngInf OBJECT IDENTIFIER ::= { rnd 89 }
rlPhy OBJECT IDENTIFIER ::= { rnd 90 }
rlJumboFrames OBJECT IDENTIFIER ::= { rnd 91 }
rlJumboFramesCurrentStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Show the current Jumbo Frames status"
::= { rlJumboFrames 1 }
rlJumboFramesStatusAfterReset OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Set the Jumbo Frames status after reset"
::= { rlJumboFrames 2 }
rlTimeSynchronization OBJECT IDENTIFIER ::= { rnd 92 }
rlDnsCl OBJECT IDENTIFIER ::= { rnd 93 }
rlCDB OBJECT IDENTIFIER ::= { rnd 94 }
rlStartupCDBChanged OBJECT-TYPE
SYNTAX TruthValue
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether the startup CDB has changed between the router's
last two reboots"
::= {rlCDB 1 }
rlManualReboot OBJECT-TYPE
SYNTAX TruthValue
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether the device was shutdown orderly before reboot or
not (i.e. power failure)"
::= {rlCDB 2 }
--xxxx OBJECT IDENTIFIER ::= { rnd 95 }
rndEndOfMibGroup OBJECT IDENTIFIER ::= { rnd 1000 }
rndEndOfMib OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" This variable indicates this is the end of RND MIB."
::= { rndEndOfMibGroup 1 }
-- Enterprise-specific traps for RND
-- Each enterprise-specific trap has two bound variables describing the exact nature of
-- the trap. rndErrorDesc provides a detailed description of the problem, including the
-- related interface number, board number or any other applicable variable.
-- rndErrorSeverity describes the severity of this problem.
-- Trap template
-- -------------
-- TRAP-TYPE
-- ENTERPRISE rnd
-- VARIABLES { rndErrorDesc, rndErrorSeverity }
-- DESCRIPTION
-- ""
-- ::=
-- -------------
rxOverflowHWFault TRAP-TYPE
ENTERPRISE rnd
VARIABLES { rndErrorDesc, rndErrorSeverity }
DESCRIPTION
"An RX buffer overflow has occurred in one of the LAN or link
interfaces. The bound variable rndErrorDesc provides the
interface number."
::= 3
txOverflowHWFault TRAP-TYPE
ENTERPRISE rnd
VARIABLES { rndErrorDesc, rndErrorSeverity }
DESCRIPTION
"Interport queue overflow has occurred in one of the LAN or link interfaces.
The bound variable rndErrorDesc provides the interface number."
::= 4
routeTableOverflow TRAP-TYPE
ENTERPRISE rnd
VARIABLES { rndErrorDesc, rndErrorSeverity }
DESCRIPTION
"An overflow condition has occurred in the Routing Table. The Routing
Table is used for IP routing algorithm (RIP)."
::= 5
resetRequired TRAP-TYPE
ENTERPRISE rnd
VARIABLES { rndErrorDesc, rndErrorSeverity }
DESCRIPTION
"This trap indicates that in order to perform the last SET request, a reset operation
of the router/bridge is required. This occurs when the layer 2 routing algorithm is
changed between SPF and Spanning Tree. The reset can be performed manually or
using the variable rndAction."
::= 10
endTftp TRAP-TYPE
ENTERPRISE rnd
VARIABLES { rndErrorDesc, rndErrorSeverity }
DESCRIPTION
"This trap indicates that in the device finished a TFTP
transaction with the management station.
variable rndErrorDesc and rndErrorSeverity provides the actual message
text and severity respectively."
::= 12
abortTftp TRAP-TYPE
ENTERPRISE rnd
VARIABLES { rndErrorDesc, rndErrorSeverity }
DESCRIPTION
"This trap indicates that in the device aborted a TFTP session with
the management station. Variable rndErrorDesc and rndErrorSeverity
provides the actual message text and severity respectively."
::= 13
startTftp TRAP-TYPE
ENTERPRISE rnd
VARIABLES { rndErrorDesc, rndErrorSeverity }
DESCRIPTION
"Informational trap indicating that the device has intiated a
TFTP session. rndErrorDesc will contain the file type in
question"
::= 14
faultBackUp TRAP-TYPE
ENTERPRISE rnd
VARIABLES { rndErrorDesc, rndErrorSeverity }
DESCRIPTION
"Automantic switchover to backup link because of main link fault."
::= 23
mainLinkUp TRAP-TYPE
ENTERPRISE rnd
VARIABLES { rndErrorDesc, rndErrorSeverity }
DESCRIPTION
"Communication returened to main link."
::= 24
ipxRipTblOverflow TRAP-TYPE
ENTERPRISE rnd
VARIABLES { rndErrorDesc, rndErrorSeverity }
DESCRIPTION
"This trap indicates that in an OpenGate IPX RIP table overflow.
The bound variable rndErrorDesc, rndErrorSeverity
provides the actual message text and severity respectively."
::= 36
ipxSapTblOverflow TRAP-TYPE
ENTERPRISE rnd
VARIABLES { rndErrorDesc, rndErrorSeverity }
DESCRIPTION
"This trap indicates that in an OpenGate IPX SAP table overflow.
The bound variable rndErrorDesc, rndErrorSeverity
provides the actual message text and severity respectively."
::= 37
facsAccessVoilation TRAP-TYPE
ENTERPRISE rnd
VARIABLES { rndErrorDesc, rndErrorSeverity }
DESCRIPTION
"This trap indicates that message that fits FACS statenebt with
operation blockAndReport was forward to the interface. The bound
variable rndErrorDesc, rndErrorSeverity(== info ) and
interface Number."
::= 49
autoConfigurationCompleted TRAP-TYPE
ENTERPRISE rnd
VARIABLES { rndErrorDesc, rndErrorSeverity }
DESCRIPTION
"This trap indicates that auto comfiguration completetd succssefully.
The bound variable rndErrorDesc, rndErrorSeverity(== info )"
::= 50
forwardingTabOverflow TRAP-TYPE
ENTERPRISE rnd
VARIABLES { rndErrorDesc, rndErrorSeverity }
DESCRIPTION
"This trap indicates that an overflow condition has occurred in the
layer II Forward Table.
The bound variable rndErrorDesc, rndErrorSeverity(== warning )"
::= 51
framRelaySwitchConnectionUp TRAP-TYPE
ENTERPRISE rnd
VARIABLES { rndErrorDesc, rndErrorSeverity }
DESCRIPTION
"This trap indicates that a connection establish between the Frame
relay Switch and the WanGate.
The bound variable rndErrorDesc, rndErrorSeverity(== warning )"
::= 53
framRelaySwitchConnectionDown TRAP-TYPE
ENTERPRISE rnd
VARIABLES { rndErrorDesc, rndErrorSeverity }
DESCRIPTION
"This trap indicates that a connection between the Frame Relay Switch
and the WanGate failed.
The bound variable rndErrorDesc, rndErrorSeverity(== warning )"
::= 54
errorsDuringInit TRAP-TYPE
ENTERPRISE rnd
VARIABLES { rndErrorDesc, rndErrorSeverity }
DESCRIPTION
"This trap indicates that the an error occured during initialization
The bound variable rndErrorDesc, rndErrorSeverity(== error )"
::= 61
vlanDynPortAdded TRAP-TYPE
ENTERPRISE rnd
VARIABLES { rndErrorDesc, rndErrorSeverity }
DESCRIPTION
""
::= 66
vlanDynPortRemoved TRAP-TYPE
ENTERPRISE rnd
VARIABLES { rndErrorDesc, rndErrorSeverity }
DESCRIPTION
""
::= 67
rsSDclientsTableOverflow TRAP-TYPE
ENTERPRISE rnd
VARIABLES { rndErrorDesc, rndErrorSeverity }
DESCRIPTION
"This warning is generated when an overflow occurs in the clients table."
::= 68
rsSDinactiveServer TRAP-TYPE
ENTERPRISE rnd
VARIABLES { rndErrorDesc, rndErrorSeverity }
DESCRIPTION
"This warning is generated when a server does not respond to the dispatchers polling
and is thought to be inactive."
::= 69
rsIpZhrConnectionsTableOverflow TRAP-TYPE
ENTERPRISE rnd
VARIABLES { rndErrorDesc, rndErrorSeverity }
DESCRIPTION
"The Zero Hop Routing connections Table has been overflown."
::= 70
rsIpZhrReqStaticConnNotAccepted TRAP-TYPE
ENTERPRISE rnd
VARIABLES { rndErrorDesc, rndErrorSeverity }
DESCRIPTION
"The requested static connection was not accepted because there is
no available IP virtual address to allocate to it."
::= 71
rsIpZhrVirtualIpAsSource TRAP-TYPE
ENTERPRISE rnd
VARIABLES { rndErrorDesc, rndErrorSeverity }
DESCRIPTION
"The virtual IP address appeared as a source IP.
All the connections using it will be deleted and
it will not be further allocated to new connections."
::= 72
rsIpZhrNotAllocVirtualIp TRAP-TYPE
ENTERPRISE rnd
VARIABLES { rndErrorDesc, rndErrorSeverity }
DESCRIPTION
"The source IP address sent an ARP specifying a virtual IP
which was not allocated for this source.
This virtual IP will not be allocated to connections of this
specific source IP."
::= 73
rsSnmpSetRequestInSpecialCfgState TRAP-TYPE
ENTERPRISE rnd
VARIABLES { rndErrorDesc, rndErrorSeverity }
DESCRIPTION
"An incoming SNMP SET request was rejected because no such
requests (except action requests) are accepted after start of
new configuration reception or during sending the current
configuration to an NMS."
::= 74
rsPingCompletion TRAP-TYPE
ENTERPRISE rnd
VARIABLES { rndErrorDesc, rndErrorSeverity }
DESCRIPTION
"A rsPingCompleted trap is sent at the completion
of a sequence of pings if such a trap was requested
when the sequence was initiated. The trap severity is info.
The trap text will specify the following information:
rsPingCompletionStatus, rsPingSentPackets, rsPingReceivedPackets
In addition to the above listed objects (which are always present),
the message will also specify the following quantities:
if any responses were received:
rsPingMinReturnTime
rsPingAvgReturnTime
rsPingMaxReturnTime"
::= 136
pppSecurityViolation TRAP-TYPE
ENTERPRISE rnd
VARIABLES { rndErrorDesc, rndErrorSeverity }
DESCRIPTION
"This trap indicates that a PPP link got an unrecognized secret.
The bound variables rndErrorDesc,
rndErrorSeverity(== warning ), interface Number. and pppSecurityIdentity"
::= 137
frDLCIStatudChange TRAP-TYPE
ENTERPRISE rnd
VARIABLES { rndErrorDesc, rndErrorSeverity }
DESCRIPTION
""
::= 138
papFailedCommunication TRAP-TYPE
ENTERPRISE rnd
VARIABLES { rndErrorDesc, rndErrorSeverity }
DESCRIPTION
""
::= 139
chapFailedCommunication TRAP-TYPE
ENTERPRISE rnd
VARIABLES { rndErrorDesc, rndErrorSeverity }
DESCRIPTION
""
::= 140
rsWSDRedundancySwitch TRAP-TYPE
ENTERPRISE rnd
VARIABLES { rndErrorDesc, rndErrorSeverity }
DESCRIPTION
"Whenever main server fails and backup takes over or server comes
up after failure a trap of this type is issued."
::= 141
rsDhcpAllocationFailure TRAP-TYPE
ENTERPRISE rnd
VARIABLES { rndErrorDesc, rndErrorSeverity }
DESCRIPTION
"DHCP failed to allocate an IP address to a requesting host
because of memory shortage or inadequate configuration of
available IP addresses."
::= 142
rlIgmpTableOverflow TRAP-TYPE
ENTERPRISE rnd
VARIABLES { rndErrorDesc, rndErrorSeverity }
DESCRIPTION
"An IGMP Table overflow."
::= 143
rlPimTableOverflow TRAP-TYPE
ENTERPRISE rnd
VARIABLES { rndErrorDesc, rndErrorSeverity }
DESCRIPTION
"An IGMP Table overflow."
::= 144
rlIpFftStnOverflow TRAP-TYPE
ENTERPRISE rnd
VARIABLES { rndErrorDesc, rndErrorSeverity }
DESCRIPTION
"The IP SFFT overflow."
::= 145
rlIpFftSubOverflow TRAP-TYPE
ENTERPRISE rnd
VARIABLES { rndErrorDesc, rndErrorSeverity }
DESCRIPTION
"The IP NFFT overflow."
::= 146
rlIpxFftStnOverflow TRAP-TYPE
ENTERPRISE rnd
VARIABLES { rndErrorDesc, rndErrorSeverity }
DESCRIPTION
"The IPX SFFT overflow."
::= 147
rlIpxFftSubOverflow TRAP-TYPE
ENTERPRISE rnd
VARIABLES { rndErrorDesc, rndErrorSeverity }
DESCRIPTION
"The IPX NFFT overflow."
::= 148
rlIpmFftOverflow TRAP-TYPE
ENTERPRISE rnd
VARIABLES { rndErrorDesc, rndErrorSeverity }
DESCRIPTION
"The IPM FFT overflow."
::= 149
rlPhysicalDescriptionChanged TRAP-TYPE
ENTERPRISE rnd
VARIABLES { rndErrorDesc, rndErrorSeverity }
DESCRIPTION
"Indicates that the physical decription of the device has
changed"
::= 150
rldot1dStpPortStateForwarding TRAP-TYPE
ENTERPRISE rnd
VARIABLES { rndErrorDesc, rndErrorSeverity,
rldot1dStpTrapVrblifIndex, rldot1dStpTrapVrblVID }
DESCRIPTION
"The trap is sent by a bridge when any of its configured ports
transitions from the Learning state to the Forwarding state."
::= 151
rldot1dStpPortStateNotForwarding TRAP-TYPE
ENTERPRISE rnd
VARIABLES { rndErrorDesc, rndErrorSeverity,
rldot1dStpTrapVrblifIndex, rldot1dStpTrapVrblVID }
DESCRIPTION
"The trap is sent by a bridge when any of its configured ports
transitions from the Forwarding state to the Blocking state."
::= 152
rlPolicyDropPacketTrap TRAP-TYPE
ENTERPRISE rnd
VARIABLES { rndErrorDesc, rndErrorSeverity }
DESCRIPTION
"Indicates that the packet drop due to the policy "
::= 153
rlPolicyForwardPacketTrap TRAP-TYPE
ENTERPRISE rnd
VARIABLES { rndErrorDesc, rndErrorSeverity }
DESCRIPTION
"Indicates that the packet has forward based on policy"
::= 154
rlDvmrpTableOverflow TRAP-TYPE
ENTERPRISE rnd
VARIABLES {rndErrorDesc, rndErrorSeverity}
DESCRIPTION
"An Dvmrp Table overflows."
::= 155
rlIgmpProxyTableOverflow TRAP-TYPE
ENTERPRISE rnd
VARIABLES { rndErrorDesc, rndErrorSeverity }
DESCRIPTION
"An IGMP PROXY Table overflow."
::= 156
rlIgmpV1MsgReceived TRAP-TYPE
ENTERPRISE rnd
VARIABLES { rndErrorDesc, rndErrorSeverity }
DESCRIPTION
"An IGMP Message of v1 received on ifIndex. "
::= 157
rlVrrpEntriesDeleted TRAP-TYPE
ENTERPRISE rnd
VARIABLES { rndErrorDesc, rndErrorSeverity}
DESCRIPTION
"One or more VRRP entries deleted due to IP interface deletion or transition. "
::= 158
rlHotSwapTrap TRAP-TYPE
ENTERPRISE rnd
VARIABLES {rndErrorDesc, rndErrorSeverity}
DESCRIPTION
"Hot swap trap."
::= 159
rlTrunkPortAddedTrap TRAP-TYPE
ENTERPRISE rnd
VARIABLES { rndErrorDesc, rndErrorSeverity }
DESCRIPTION
"Informational trap indicating that a port is added to a trunk"
::= 160
rlTrunkPortRemovedTrap TRAP-TYPE
ENTERPRISE rnd
VARIABLES { rndErrorDesc, rndErrorSeverity }
DESCRIPTION
"This warning is generated when a port removed from a trunk."
::= 161
rlTrunkPortNotCapableTrap TRAP-TYPE
ENTERPRISE rnd
VARIABLES { rndErrorDesc, rndErrorSeverity }
DESCRIPTION
"Informational trap indicating that a port can not be added to
a trunk because of device limitations or diffrent swIfType."
::= 162
rlPimSmInterfaceTableOverflow TRAP-TYPE
ENTERPRISE rnd
VARIABLES {rndErrorDesc, rndErrorSeverity}
DESCRIPTION
"The PIM interface table Table overflows."
::= 163
rlPimSmNextHopTableOverflow TRAP-TYPE
ENTERPRISE rnd
VARIABLES {rndErrorDesc, rndErrorSeverity}
DESCRIPTION
"The PIM SM Next Hop Table overflows."
::= 164
rlPimSmMulticastRouteTableOverflow TRAP-TYPE
ENTERPRISE rnd
VARIABLES {rndErrorDesc, rndErrorSeverity}
DESCRIPTION
"The PIM SM Multicast Route Table overflows."
::= 165
rlPimSmTableOverflow TRAP-TYPE
ENTERPRISE rnd
VARIABLES {rndErrorDesc, rndErrorSeverity}
DESCRIPTION
"The PIM SM Table(Not include the Interface, Next Hop,
Multicast Route Tables) overflows."
::= 166
rlPimSmSrcUnreacable TRAP-TYPE
ENTERPRISE rnd
VARIABLES {rndErrorDesc, rndErrorSeverity}
DESCRIPTION
"An RPF source unreacable."
::= 167
rlPimSmParallelPathToLAN TRAP-TYPE
ENTERPRISE rnd
VARIABLES {rndErrorDesc, rndErrorSeverity}
DESCRIPTION
"Two Pim ifIndexes connect to the same LAN"
::= 168
rlPimSmNotSMUpstreamNeighbor TRAP-TYPE
ENTERPRISE rnd
VARIABLES {rndErrorDesc, rndErrorSeverity}
DESCRIPTION
"An RPF Upstream Neighbor is not support the PIM SM."
::= 169
rlLockPortTrap TRAP-TYPE
ENTERPRISE rnd
VARIABLES { rndErrorDesc, rndErrorSeverity }
DESCRIPTION
"Informational trap indicating that a locked port receive
a frame with new source Mac Address."
::= 170
vlanDynVlanAdded TRAP-TYPE
ENTERPRISE rnd
VARIABLES { rndErrorDesc, rndErrorSeverity }
DESCRIPTION
"add gvrp dynamic vlan"
::= 171
vlanDynVlanRemoved TRAP-TYPE
ENTERPRISE rnd
VARIABLES { rndErrorDesc, rndErrorSeverity }
DESCRIPTION
"remove gvrp dynamic vlan"
::= 172
vlanDynamicToStatic TRAP-TYPE
ENTERPRISE rnd
VARIABLES { rndErrorDesc, rndErrorSeverity }
DESCRIPTION
"vlan status was changed from dynamic to static"
::= 173
vlanStaticToDynamic TRAP-TYPE
ENTERPRISE rnd
VARIABLES { rndErrorDesc, rndErrorSeverity }
DESCRIPTION
"vlan status was changed from static to dynamic"
::= 174
dstrSysLog TRAP-TYPE
ENTERPRISE rnd
VARIABLES { rndErrorDesc, rndErrorSeverity }
DESCRIPTION
"Master receive trap from slave , and forward it as trap"
::= 175
rlEnvMonFanStateChange TRAP-TYPE
ENTERPRISE rnd
VARIABLES { rndErrorDesc, rndErrorSeverity }
DESCRIPTION
"Trap indicating the fan state.
rndErrorSeverity will be:
0 for fan state nomal, notPresent
1 for fan state warning, notFunctioning
2 for fan state critical
3 for fan state fatal
The error text will specify the fan index, fan description and the exact fan state"
::= 176
rlEnvMonPowerSupplyStateChange TRAP-TYPE
ENTERPRISE rnd
VARIABLES { rndErrorDesc, rndErrorSeverity }
DESCRIPTION
"Trap indicating the power supply state.
rndErrorSeverity will be:
0 for power supply state nomal, notPresent
1 for power supply state warning, notFunctioning
2 for power supply state critical
3 for power supply state fatal
The error text will specify the power supply index, power supply description and the exact power supply state"
::= 177
rlStackStateChange TRAP-TYPE
ENTERPRISE rnd
VARIABLES { rndErrorDesc, rndErrorSeverity }
DESCRIPTION
"Trap indicating the stack connection state
0 for stack state connected,
1 for stack state disconnected "
::= 178
rlEnvMonTemperatureRisingAlarm TRAP-TYPE
ENTERPRISE rnd
VARIABLES { rndErrorDesc, rndErrorSeverity }
DESCRIPTION
"Trap indicating that the temperature in the device has exceeded the
device specific safe temperature threshold."
::= 179
rlCopyFinished TRAP-TYPE
ENTERPRISE rnd
VARIABLES { rndErrorDesc, rndErrorSeverity }
DESCRIPTION
"Informational trap indicating that the device has finished
a copy operation successfully."
::= 180
rlCopyFailed TRAP-TYPE
ENTERPRISE rnd
VARIABLES { rndErrorDesc, rndErrorSeverity }
DESCRIPTION
"Informational trap indicating that the copy operation has failed."
::= 181
rlIpmAddOutgoingInterfaceFailed TRAP-TYPE
ENTERPRISE rnd
VARIABLES { rndErrorDesc, rndErrorSeverity }
DESCRIPTION
"Adding an Ipm outgoing interface has failed."
::= 182
rlBrgMacAddFailedTrap TRAP-TYPE
ENTERPRISE rnd
VARIABLES { rndErrorDesc, rndErrorSeverity }
DESCRIPTION
"Informational trap indicating that adding dynamic mac/s
failed due to full hash chain."
::= 183
END
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.