[DESTINATIONS] VolShortName=Master Vol VolLongName=Master Volume RecShortName=Rec RecLongName=Recording Control VoiceShortName=Voice VoiceLongName=Voice Commands [SOURCES] ; Lines are enabled by default. XC1ShortName=Reset XC1LongName=Wavetable Reset CDShortName=CD CDLongName=CD AuxShortName=WTSyn AuxLongName=Wave Table VideoShortName=Vid VideoLongName=Video Input VideoDisable=1 SynthShortName=Int FM SynthLongName=Internal FM MicShortName=Mic MicLongName=Mic LineShortName=LineI LineLongName=Line In M InDisable=1 M OutDisable=1 ModemDisable=1 LOutShortName=LineO LOutLongName=Line Out I2S0ShortName=I2S0 I2S0LongName=I2S0 I2S0Disable=1 I2S1ShortName=I2S1 I2S1LongName=I2S1 I2S1Disable=1 PhatShortName=3D PhatLongName=3D Voice [CONTROLS] XC1ShortName=Reset XC0Disable=1 XC1Disable=0 AGC 20dB Record Source Voice Source Master Volume Master Mute CD VolumeShortName=IntCD Aux VolumeShortName=WTSynth Video Volume Wave Volume Synth Volume Mic Out Volume Line-In Volume MonoIn VolumeDisable=1 M Out VolumeDisable=1 Modem VolumeDisable=1 I2S0 VolumeDisable=1 I2S1 Volume CD Mute Aux Mute Video Mute Voice Mute Synth Mute Mic Mute Line-In Mute MonoIn MuteDisable=1 M Out MuteDisable=1 Modem MuteDisable=1 I2S0 MuteDisable=1 I2S1 Mute [SETTINGS] DACMute=0 ; Wave output MicMute=1 LineInMute=1 CDMute=0 AuxMute=0 VidMute=1 MonoInMute=1 ModemMute=1 I2S0Mute=1 I2S1Mute=1 WaveMicAGC=0 VoiceMicAGC=0 Mic20dB=0 XCTL0=0 XCTL1=1 MonoOutMute=1 FMMute=1 3DOn=1 HwVolume=0 ; Show control on property page = 1, don't show = 0 EnableHwVol=0 ; Default HwVolume enable setting (1=enable, 0 = disable) CalibrateVolume=0 ; Show Calibration buttons = 1 ;These are volume settings. 0 to 65535 decimal WaveInAux1=32767 WaveInAux2=32767 WaveInAux3=32767 WaveInLine=32767 WaveInLOut=32767 WaveInMic=32767 WaveInModem=32767 VoiceInAux1=32767 VoiceInAux2=32767 VoiceInAux3=32767 VoiceInLine=32767 VoiceInLOut=32767 VoiceInMic=32767 VoiceInModem=32767 DACVol=32767 ; Wave output FMSynthVol=32767 LineInVol=32767 MicVol=0 CDVol=10000 AuxVol=10000 VidVol=0 I2S0Vol=0 I2S1Vol=0 MonoInVol=0 ModemVol=0 3DLevel=50000 MonoOutVol=0 MasterVol=50000 I2S0Format=0 ;0=Off, 1=Right justified, 2=I2S justified, 3=Left justified I2S1Format=0 HwVolMin=12 ; Default settings for Hardware volume Min and Max HwVolMax=72 ; ; Set default Capture source ; Line, LOut, CD, Mic, Aux, Video WaveInSource=Aux VoiceInSource=Mic ; New settings for release 4.05.00.0156 and greater VendorStr=Apex Wave Device ShowSingleDMA=1 ; Single Mode DMA ShowDigitalCD=0 ; CheckBox for enableing Digital CD input on I2S0 ShowCNP=1 ; Capture not equal to playback Show3D=1 ; Enable 3D digital ShowI2S0=0 ; I2S format ShowI2S1=0 ShowClkMul=0 ; Clock multiplier ShowTypeF=1 ; Type F DMA usage ; Default settings for property sheet settings. EnableSingleDMA=0 ; driver default is FALSE if not specified here EnableDigitalCD=0 ; driver default is FALSE if not specified here EnableDigital3D=1 ; Apply Phat Stereo to analog and digital signals CNP=1 ; Capture rate not locked to playback rate ClkMult=15 ; Clock multiplierDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.