*****************************************************************************
* *
* PCI 10/100 Fast Ethernet Adapter *
* *
* NDIS/5 Driver for Windows 98 *
* *
*****************************************************************************
The driver (FastNIC.SYS) conforms to the Network Driver Interface
Specification (NDIS) 5.0, and used with Microsoft Windows 98.
Contents:
---------
A) Installing NDIS5 Miniport driver on Microsoft Windows 98
B) Configuring NDIS5 Miniport driver on Microsoft Windows 98
A) Installing NDIS5 Miniport driver on Microsoft Windows 98
========================================================
1. Plug PCI 10/100 Fast Ethernet Adapter into one of the Master
PCI slots of your PCI platform.
2. Turn power ON then boot from Windows 98.
3. Windows 98 will prompt "PCI Ethernet Controller" in "New Hardware
Found" dialog box and "Add New Hardware Wizard" dialog box.
4. Click "Next >" button when "Search for the best for your device.
[Recommended]" is on.
5. Insert the PCI 10/100 Fast Ethernet Adapter Driver Diskette
in your floppy drive.
6. Disable the "Floppy disk drives" check box. Click "Specify a location"
, type "A:\WIN98" and then click "Next >" button.
7. Windows 98 will prompt "PCI 10/100 Fast Ethernet Adapter"
in "Add New Hardware Wizard" dialog box.
8. Click "Next >" button and Windows starts to copy files from Windows
98 CD-ROM to your hard disk.
9. Click "Finish" button from "Add New Hardware Wizard" dialog box.
10. Remove the Adapter Driver Diskette from your floppy drive.
11. Restart your computer to take effect the network function.
B) Configuring NDIS5 Miniport driver on Microsoft Windows 98
==========================================================
1. Click the "My Computer" icon in the Main Program Group.
2. Click the "Control Panel" icon from My Computer window.
3. Click the "Network" icon from the Control Panel window.
4. Select "PCI 10/100 Fast Ethernet Adapter" item from
"Network" dialog box, then click "Properties" button.
5. Click "Advanced" button from "PCI 10/100 Fast Ethernet Adapter
Properties" dialog box.
6. Select the Media Type value (AutoSense, 10BaseT, 10BaseT Full_Duplex,
100BaseTX, 100BaseTX Full_Duplex) from "Value" item, then click OK
button from "PCI 10/100 Fast Ethernet Adapter Properties"
dialog box.
7. Click OK button from "Network" dialog box.
8. Restart your computer to take effect the new configuration.
Trademarks:
Microsoft Windows 98 is a trademark of Microsoft Corporation.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.