1. FT_NWB10.exe Driver
2. NW_312.txt File Contents

NW_312.txt Driver File Contents (FT_NWB10.exe)

Netware 3.12

NWPA Update Package Installation Instructions 
for NetWare 3.12

Before installing the FastTrak100 NetWare driver, 
make sure that you have installed the latest update 
for the NetWare 3 operating system.

1.	From the website at 
	http://developer.novell.com/devres/sas/certinfo.htm 
	download NWPA_UP.EXE from the "Download the Update 
	Package" link.
2.	Install DOS and the CD-ROM driver on the target 
	server machine.
3.	Create the directory C:\SERVER.312, then change to 
	that directory.
4.	Copy NWPA_UP.EXE to C:\SERVER.312.
5.	Execute NWPA_UP.EXE in the C:\SERVER.312 directory.
6.	Delete NBI.NLM and NWTAPE.CDM.
7.	Execute 312PTD.EXE in the same directory.


For New Netware 3.12 Servers:

Note: 	If your server already has NetWare 3.12 installed, 
	jump to step 8 of the next section "For Existing 
	NetWare 3.12 Servers."

1.	Change directory to the D:\NETWARE.312\ENGLISH directory 
	on the CD-ROM drive, if it is drive letter is D:
2.	Enter install at the DOS command line. Proceed through 
	the installation of NetWare 3.12 as usual, until the 
	installation program ends with the cursor at the server 
	console command line.
3.	At the server console enter the following commands:
	
	load C:\SERVER.312\312ptd\native\start\npapatch
	load C:\SERVER.312\mmattrfx
	load C:\SERVER.312\nbi31x

4.	Load the "FASTTRAK.HAM" driver.	
5.	Continue installation by loading INSTALL.NLM.
6.	Create AUTOEXEC.NCF, as Install prompts you.
7.	Create STARTUP.NCF, add the following lines before the line
	"load FASTTRAK":
        
	load c:\SERVER.312\312ptd\native\start\npapatch
	load c:\SERVER.312\mmattrfx
	load c:\SERVER.312\nbi31x

8.	Save the file.
9.	DOWN and EXIT the server.
10.	Remove the NetWare CD-ROM.
11.	Reboot the server.


For Existing Netware 3.12 Servers:

8.	Copy Fasttrak driver FASTTRAK.HAM & FASTTRAK.DDI into the 
	Netware 3.12 boot directory. Ex. C:\SERVER.312\
9.	Edit STARTUP.NCF and add the following lines after any set 
	parameters but before any file loading:

	load c:\SERVER.312\312ptd\native\start\npapatch
	load c:\SERVER.312\mmattrfx
	load c:\SERVER.312\nbi31x

   	Also add a subsequent line to "load FASTTRAK" to load the 
   	FASTTRAK.HAM driver.
10.	Boot the server