********************************************************************** ** ** ** Title: DM9102a WinCE.net 4.0 for X86 Driver ** ** ** ** Version: V 3.01 -- 2003.04.24 ** ** ** ** File: Readme.txt - This file guiding setup step ** ** Debug folder - To build debug mode ** ** Release folder - To build release mode ** ** ** ** Notes: The Davicom DM9102a NDIS CE miniport device driver ** ** is used to be the network component of the Microsoft ** ** WinCE.net enables hardware containing Davicom's fast ** ** ethernet controller 'DM9102a'. ** ** This file describes the procedures of the driver ** ** installation. ** ** ** ********************************************************************** Setting up a dm9102a device on X86 wince platform : 1. Installation 1.1 Install the WinCE .NET 4.0 Platform builder. (Notice: install only x86 microprocessor, or you will waste your HD space.) 1.2 Create a new platform.(example for dm9102a) 1.2.1 Copy the file of folder in debug or release to specify place. The folder of debug or release contains the following files. dm9102a.dll dm9102a.map dm9102a.pdb dm9102a.rel 1.3 Add to platform for dm9102a of Catalog 1.4 Add 'dm9102a' target to the root makefile. Open the file $(_winceroot)\public\common\cesysgen\makefile Append 'dm9102a' to all 'dc21x4' rules or dependencies. (should have four places to append) 1.5 Buid selected Features. 2. Platform Configuration 2.1.1 Edit your cesysgen.bat, add 'dm9102a' after 'dc21x4'. 2.1.2 To add 'dm9102a' to CE_MODULES <e.g.> $(_winceroot)\public\<your project>\wince410\cepc\oak\misc\cesysgen.bat set CE_MODULES=dm9102a %CE_MODULES% 2.2 Modify your project.bib for module definition <e.g.> MODULES dm9102a.dll $(_FLATRELEASEDIR)\dm9102a.dll NK SH 3. Driver Configuration 3.1 In the file project.reg, add the following registry values. <e.g.> [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\PCI\Template\DM9PCI] "Class"=dword:02 "SubClass"=dword:00 "ProgIF"=dword:0 "VendorID"=multi_sz:"1282" "DeviceID"=multi_sz:"9102" "Dll"="NDIS.dll" "Entry"="NdisPCIBusDeviceInit" "IsrDll"="giisr.dll" "IsrHandler"="ISRHandler" "PortIsIO"=dword:1 "PortOffset"=dword:38 "PortSize"=dword:4 "PortMask"=dword:00010000 [HKEY_LOCAL_MACHINE\Comm\DM9PCI] "DisplayName"="DM9102 Fast Ethernet Adapter" "Group"="NDIS" "ImagePath"="dm9102a.dll" [HKEY_LOCAL_MACHINE\Comm\DM9PCI\Linkage] "Route"=multi_sz:"DM9PCI1" [HKEY_LOCAL_MACHINE\Comm\PCI\DM9PCI1] "DisplayName"="DM9102 Fast Ethernet Adapter" "Group"="NDIS" "ImagePath"="dm9102a.dll" [HKEY_LOCAL_MACHINE\Comm\Tcpip\Linkage] "Bind"="dm9pci1" [HKEY_LOCAL_MACHINE\Comm\PCI\DM9PCI1\Parms] "BusType"=dword:5 "BusNumber"=dword:0 "SysIntr"=dword:15 "ConnectionType"=dword:0 "BufferPhysicalAddress"=dword:801a0000 "XmitBuffer"=dword:A "RecvBuffer"=dword:20 [HKEY_LOCAL_MACHINE\Comm\PCI\DM9PCI1\Parms\TcpIp] "EnableDHCP"=dword:0 "UseZeroBroadcast"=dword:0 "DefaultGateway"="x.x.x.x" "IpAddress"="x.x.x.x" "Subnetmask"="x.x.x.x" "DNS"="x.x.x.x" "WINS"="x.x.x.x" 3.2 TCP/IP configurations 3.2.1 EnableDHCP Set 1 for DHCP enable, 0 for disable. 3.2.2 UseZeroBroadcast Set 1 for use zero broadcast, 0 for not. 3.2.3 DefaultGateway Specify your gateway address in x.x.x.x format. 3.2.4 IpAddress Specify your IP address in x.x.x.x format. 3.2.5 Subnetmask Specify your subnet mask in x.x.x.x format. 3.2.6 DNS Specify your domain name server's address in x.x.x.x format. 3.2.7 WINS Specify your WINS server's address in x.x.x.x format. ------------------------------------------------------------------------------ All trademarks or brand names mentioned are trademarks and registered trademarks of their respective companies.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.