readme.txt Driver File Contents (R45935.EXE)

         ----------------------------------------------------
                               WCGDRV
               3Dlabs Wildcat Pro Display Driver for
                    Dell Windows 2000 Workstation
         ----------------------------------------------------


-------------
Legal Notices
-------------
Copyright 2000, 3Dlabs Inc. Ltd.

All rights reserved.

Including software, file formats, and audio-visual displays; may be used 
pursuant to applicable software license agreement; contains confidential and 
proprietary information of 3Dlabs and/or third parties which is protected 
by copyright and trade secret law and may not be provided or otherwise made 
available without proper authorization.

Restricted Rights Legend
Use duplication, or disclosure by the Government is subject to restrictions 
as set forth in subparagraph (c) (1) (ii) of the Rights in Technical Data and 
Computer Software clause at DFARS 252.227-7013 or subparagraphs (c) (1) and 
(2) of Commercial Computer Software -- Restricted Rights at 48 CFR 52.227-19, 
as applicable.

Unpublished -- rights reserved under the copyright laws of the United States. 

Heidi® is a registered trademark of Autodesk, Inc.
3D Studio Max® is a registered trademark of Autodesk/Discreet.
Intel© product names and logos are the property of Intel Corp.
Microsoft© product names and logos are the property of Microsoft Corp.
3Dlabs© product names and logos are the property of 3Dlabs Inc. Ltd.

--------------------
End of Legal Notices
--------------------


-------------------
Version Information
-------------------
Product:     WCGDRV
Number:      SHBY048AC-0500A
Version:     05.05.02.09
Date:        17-JAN-2002


Description:
    The 3Dlabs Wildcat Pro Display Driver provides support for accelerated  
    high resolution, true andhigh color graphics using OpenGL.

This driver supports multi-frequency video monitors, including DDC capable
    Monitors. 

This driver supports the following languages: English, French, German, Japanese,
    Korean, Simplified Chinese, Spanish, and Traditional Chinese. If 
    the currently installed Windows NT language is not one of the above choices,
    the installation will default to English.


    This release of the Wildcat Pro Display Driver will only install and run on 
    systems running Windows 2000.

    Heidi® and 3D Studio Max® driver are included with this release on separate packages.
    For information on installing the Heidi® and 3D Studio Max® drivers, see the readme.txt files
    included on those packages.
--------------------------
End of Version Information
--------------------------


Installation Help
=================

    This driver will not run on any machine that does not have PCI backplane
    hardware.  The Wildcat Pro Display driver will work with both AGP and
    AGP Pro versions of the Wildcat Display adapter.

    See MANIFEST.TXT for a list of delivered files.

    Please refer to the installation documentation provided with the media
    supplied with your system.

    If you are installing an updated driver, please refer to the "Customer
    Support" section below.
    

    WINDOWS 2000 PLUG AND PLAY
    --------------------------

    For driver installation and removal, refer to the Hardware section
    of the Windows 2000 online help. This Help is generally available by 
    clicking on "Start" at the bottom left of the screen, and selecting the
    help entry from the menu. 


    Automated Installation Help
    ===========================

    Extract Video Driver from the Dell ResourceCD
  
      1. Insert the Dell ResourceCD into the CD/DVD-ROM drive. 
      2. If the Dell ResourceCD window does not open automatically, double-click on My Computer 
         on your desktop and then double-click on the CD/DVD-ROM drive containing the Dell ResourceCD. 
      3. Follow the instructions provided by the Dell ResourceCD to locate the video driver 
         package for your card. 
      4. Once you have located the package, select it to unzip the driver on to the hard drive. 
         These files are extracted by default directory to the C:\Dell\Drivers\xxxx (where xxxxx is the name of the driver being unzipped). 
      5. At the WinZip Self-Extractor screen, click OK. 
      6. At the Dell Computer Self-Extracting Driver Installation screen, click Unzip. Once the 
         files have been unzipped, click OK. 
      7. In a moment, your browser opens with further instructions for installing the driver. 

    Install Updated Video Driver in Windows 2000

      NOTE:  The following instructions refer to installation of the driver from your Dell 
             Resource CD. If you downloaded the driver from the Dell Support web site, then in 
             instruction 3 below type the correct path on your hard drive where the new driver 
             has been downloaded. 

      1. This driver must be installed by a user with Windows Administrator privileges. Please 
         consult your system administrator or Microsoft Windows 2000 User's Manual for more information on Administrator privileges. 
      2. Start Microsoft Windows 2000. 
      3. Double click on the Setup.exe file located with the driver package. If you extracted 
         the drivers from the Dell Resource CD using the default directory they will be located 
         in C:\Dell\Drivers\xxxxx (where xxxxx is the name of the driver being unzipped). 
      4. In the Wildcat Driver Installation Message dialog box, click OK to begin the driver 
         install procedure. Click Cancel to dismiss the installation. 
      5. After the driver installs, click Yes to reboot the system. 

      NOTE:  You must reboot the system after driver installation for the changes to take place. 


Uninstall Help
==============
    To uninstall this version of the 3DLabs Wildcat Pro Display Driver,
    use the Add/Remove Programs Properties utility in the Control Panel.

    WINDOWS 2000 UNINSTALL
    ------------------------

    1. From the operating system Start menu, go to Settings/Control Panel
       and double-click Add/Remove Programs.

    2. On the Add/Remove Software Programs Properties dialog, select "Wildcat Display
       Driver" from the list of available programs, and click Add/Remove to
       uninstall the existing driver.

    3. A dialog will appear which describes the function of the 3Dlabs
       Display Driver uninstall program.  You will be prompted to verify
       the removal of the Display Driver. Click Yes to complete the driver
       removal.


Screen Resolution and Refresh Rate Table
========================================
    To access the list of available screen resolutions and refresh rates,
    select the "List All Modes..." button on the Adapter page of the Advanced Display Properties dialog.

    1. From the operating system Start menu, go to Settings/Control Panel
       and double-click Display.

    2. From the Display Properties dialog, click the Settings tab.

    3. Click the Advanced button.

    4. Click the Adapter tab.

    5. Click "List All Modes..." to access the table of
       supported screen resolutions and refresh rates.


Monitor Selection
=================
    The "Wildcat Monitor" page in Display Properties must be used to
    change the monitor type.

    1. From the operating system Start menu, go to Settings/Control Panel and
       double-click Display.

    2. On the Display Properties dialog, click the Settings tab.

    3. Click the Advanced button.

    4. Click the Wildcat Monitor tab.

    5. Click the "Configure Monitor" button.
       The "Configure Monitor" dialog will be displayed.

    6. Select one of the three monitor types: Generic, Plug-and-Play, or Vendor.
       Selection of one of these three monitor types will potentially alter the
       list of resolutions reported in the "Available Resolutions" field.

       - The Generic monitor type will provide a list of generic resolutions.
       - The Plug-and-Play monitor type will provide a list of the resolutions
         supported by the monitor plugged into the system if the monitor is
         Plug-and-Play capable.
       - The Dell monitor selection allows you to choose a specific monitor
         from the provided list of monitors.

       Once you have chosen a monitor, the resolution and refresh rate nearest
       to the current settings will be highlighted.

    7. Click OK to accept the new monitor, resolution, and refresh settings.
       A dialog box will display inquiring whether you wish to keep the new
       settings.  If you select Yes, the settings will be changed and the
       Configure Monitor dialog will be dismissed.  If you select No, the
       settings will revert to previous settings. 

    8. Click OK to dismiss the Advanced dialog.

    9. Click CANCEL to dismiss the Display Properties dialog.  (NOTE: If you click OK, the monitor settings will revert to the previous settings.)

Display Modes
=============

    1. Choose the Display icon in the Control Panel.

    2. On the Display Properties dialog, click the Settings tab.

    3. Select a resolution from the Available Resolutions list.

    4. Click OK to accept the new display mode.

    5. Click OK to dismiss the Advanced dialog.

    6. Click CANCEL to dismiss the Display Properties dialog.  (NOTE: If you click OK, the monitor settings will revert to the previous settings.)


Configuration
=============
The "Wildcat Configuration" page in Advanced Display Properties must be used to
    change the driver configuration.

The Synchronize Buffer Swap to Vertical Sync check box on the Wildcat 
Configuration tab is checked by default. This provides the highest visual 
quality. To obtain higher frame rate performance for benchmarking purposes, 
clear this check box so that the display is not synchronized to vertical sync. When 
this option is not checked, you may experience certain screen artifacts such 
as tearing; however, this box should generally be unchecked for performance 
benchmarking.

Click Config Wizard on the Wildcat Configuration tab to activate a 
step-by-step interface that will allow you to modify your current display 
configuration or create a new one. In the Wildcat Configuration Wizard, click 
Next and follow the prompts to create a new configuration, or modify or delete 
an existing one.

The default bitplane mode is 96; some resolutions are available only in 96 bitplane mode. 


Context-Sensitive Help
======================

Context-sensitive help is provided for 3Dlabs Wildcat dialogs in the Display
properties applet.  The only exception to this is the Configuration Wizard,
which provides detailed instructions for each step.  Context-sensitive help
for a particular control is accessible using three different methods.

    - Click the question mark located on the title bar of the active dialog.
      The cursor will change to the help select cursor.  Next, click
      on the control for which you wish to receive help.
    - Right-click the control for which you wish to receive help.
    - Set the focus on the control for which you wish to receive help and press F1.

Any of these methods will display a small box filled with text that provides
information on the control you have chosen.


New Features
============




Fixes
=====

05.05.02.09
    - Fixed a hang when running glperf and viewperf together.
    - Fixed inconsitencies and the display properties page.
    - Fixed a hang when running XP screen saver (flying obj).

05.05.02.08
    - Additional fix for various fog types.

05.05.02.07
    - Made changes to support offscreen memory management when D3D not
      supported.

05.05.02.06
    - Color3/4i Vertex234i immidiate mode fix.
    - Fixed a hang when running 3dstress.bat which was introduced in the
      previous release.

05.05.02.05
    - Fixed hang for 3DMark 2000 demo mode on test after Stone Henge.
    - Removed DX support when multi-display configuration is being used.
    - Fixed a multi-threading related hang.  Threadwin + another OpenGL
      application.

05.05.02.04
    - Fixed multitexture problems when running Quake III Team Arena (TR 1767).
    - Fixed BIOS version string displayed in the applet.

05.05.02.03
    - Fixed a multitexturing problem.

05.05.02.02
    - Fixed a problem where the user could not change the display configuration
      after adjusting the monitor color calibration.

05.05.02.01
    - Added more error checking for invalid surface handles.
    - Fixed a hang when running 3DMark2000 bump map test.
    - Fixed a global texture corruption with 5110 when running 3dExcercizer.exe.
    - Fixed a hang that can occur when exiting globe.exe.
    - Fixed a problem where the system can boot into VGA mode.



Troubleshooting
================

    Refer to the Hardware section of the Windows 2000 online help for  
    troubleshooting. Or, see the Customer Support information listed below.

Customer Support
================
    Support is available on our web site at http://www.3dlabs.com. Just click on
    the support link.  You may also email us at support@3dlabs.com.
    the support link.  You may also email us at support@3dlabs.com.
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web2, load: 1.68