1. i82430.exe Driver
2. SETUP.INF File Contents

SETUP.INF Driver File Contents (i82430.exe)

;
; SETUP Information
;

[wellcome]
vender="Bus Master IDE"
name=""
logo=0
color=2
wintitle="82430FX/HX Bus Master IDE Setup"
group="Bus Master"


[dir]
default=C:\BMIDE


[disk]
;
; For configuration of disk driver and fast disk
;
driver=TRIDMA.SYS
SetupFastDisk=1
CheckCdrom=0
fastdisk=TRICTR.386
transint13=TRIINT13.386


[cdrom]
;
; For configuration of CD-ROM driver
;
; driver=drivername[ parameters]
;
driver=TRICD.SYS /D:MSCD000
mscdex=MSCDEX /D:MSCD000
SetupCDROM=1


[diskfiles]
;
; Disk driver
;
TRIDMA.SYS=
TRICTR.386=
TRIINT13.386=


[cdromfiles]
;
; CD-ROM driver
;
TRICD.SYS=


[commonfiles]
;
; Read me
;
;README.TXT=


[creategroup]
number of utilities=0


[Help]
##Windows 95
1)  Close any running applications.
2)  Remove references to installed real-mode IDE device drivers
    in the AUTOEXEC.BAT and CONFIG.SYS files, especially any
    drivers that control ATAPI CD-ROM and special IDE features.
3)  Remove references to the default IDE device drivers:
    A)  Open the Control Panel folder and invoke the System
        applet.
    B)  Click on the Device Manager option.
    C)  Click on the View Devices by Type button. A list of the
        system devices connected to the system will be displayed.
    D)  Click on the Hard disk controllers record and remove all
        the instances under this record.
    E)  Select Yes when prompted to re-start Windows 95.
    F)  Windows 95 will re-start.
4)  Install the Bus Master EIDE/ATAPI driver:
    After you remove references to the default installed IDE
    device drivers and re-start the system. Windows 95 will
    report that a Standard Dual PCI IDE Controller or Standard
    ESDI/IDE Controller has been detected in the system.
    A)  Select Driver from Manufacturer's Disk.
    B)  Insert the floppy disk containing the driver file
        (IDEATAPI.MPD) and installation file (IDEATAPI.INF)
        into the system.
    C)  Choose OK to load the driver from the A:\ drive.
    D)  Windows 95 will display a Select Device window. Choose
        OK.
        When Windows 95 reports that a Standard Dual PCI IDE
        Controller has been detected, the selected device type
        should be the Intel 82430FX/HX Bus Master IDE Controllers.
        When Windows 95 reports that a Standard ESDI/IDE
        Controller has been detected, the selected device type
        should be the Intel 82430FX/HX Bus Master IDE Controller.
    E)  When prompted to re-insert the floppy containing the
        IDEATAPI.MPD file, choose OK again. Windows 95 may not
        be able to process the .INF file and .MPD file the first
        time, choose OK again if this happens.
    F)  Select Yes when prompted to re-start Windows 95.
$$

##Windows NT
1)  From the Program Manager, double click on "Windows NT Setup"
    in the Main group.
2)  Select "Options/Add/Remove SCSI Adapters..."
3)  Click on Add.
4)  The "Select SCSI Adapter Option" dialog will appear;
    select "Other (Requires a disk from a hardware manufacturer)"
    from the "Adapter:" list box.
5)  Next, the "Insert Diskette" dialog box will appear; insert
    the Triones 82430FX/HX Bus Master EIDE/ATAPI Driver disk into
    Drive A: and type in "a:\winnt35" and <Return>.
6)  Next, the "Select OEM Option" dialog box will appear; select
    "82430FX/HX Bus Master EIDE/ATAPI" and click "OK."
7)  Next, the "Select SCSI Adapter Option" dialogbox will appear;
    click on the "Install" button in the dialog box. If
    installation is successful, the "SCSI Adapter Setup" dialog
    box will reappear, and "82430FX/HX Bus Master EIDE/ATAPI" will
    be listed. That means the driver is installed.
8)  Reboot your system to load the driver.
$$

##OS/2
1)  Copy TRIOS2.ADD from the floppy diskette to your hard disk
    under the OS2 directory (i.e., C:\OS2).
2)  Edit C:\CONFIG.SYS  to  replace
        BASEDEV=IBM1S506.ADD
        with
        BASEDEV=TRIOS2.ADD
3)  Reboot the system.
$$

##SCO Unix
1)  Install SCO UNIX 3.2.x or SCO Open Desktop 3.x using the
    default SCO IDE driver.
2)  Reboot your SCO UNIX system.
3)  Insert Triones supplied diskette into the 3.5inch floppy
    drive of your system. Use doscp  command to copy the file
    TRISCO.TAR to your /tmp directory. For example, if you are
    using floppy drive A, type:
        doscp  a:/scounix/trisco.tar /tmp/trisco.tar
4)  From root directory, type the following commands:
        mkdir  /inst
        cd  /inst
        tar  xvf  /tmp/trisco.tar  .
    (NOTE: there is a period at the end of the last command.)
5)  Now, insert a blank diskette into the floppy drive A and
    type:
        tar  cvf  /dev/<your floppy drive A device name>  .
    (NOTE: there is a period at the end of the last command.)
    Your floppy drive A device name could be:
        rfd096ds15      5.25    DSHD
        rfd0135ds18     3.5     DSHD
        rfd048ds9       5.25    DSDD
        rfd0135ds9      3.5     DSDD
    Now you have already made an installation diskette for the
    device driver. Start the installation by typing:
        custom
6)  Select the "Install" operation and then follow the guided
    steps. When prompted "Do you want to set the device
    configuration (y/n)", answer "n".
7)  Reboot your SCO UNIX system.
$$

##NOVELL312
1)  Copy the driver TRIN312.DSK to the subdirectory which holds
    the file SERVER.EXE.
2)  Boot up the file server.
3)  On the system console and on the command prompt state,
    type in:
    load TRIN312.DSK <Enter>

You can also include the above command line into the start up
file STARTUP.NCF to load the driver automatically.
$$

##NOVELL4x
1)  Copy the driver TRIN4X.DSK to the subdirectory which holds
    the file SERVER.EXE.
2)  Boot up the file server.
3)  On the system console and on the command prompt state,
    type in:
    load TRIN4X.DSK  <Enter>

You can also include the above command line into the start up
file STARTUP.NCF to load the driver automatically.
$$