Accton Technology Corporation Netware Client32 Driver Installation Overview ============================================= Contents: A. File Description B. Driver Installation for DOS32 C. Driver Installation for Microsoft Windows 3.x D. Driver Installation for Microsoft Windows 95 A. File Description -------------------- ------------------------------------------------------------------------------- Filename Description ------------------------------------------------------------------------------- README.TXT This file. Presents a summary of the contents for Netware Client32 driver installation. 1208ODI.LAN Client32 ODI driver for Accton 10Mbps PCI Bus Ethernet Adapter. This driver complies with Netware ODI Server driver SPEC 3.3. 1208ODI.LDI Driver (1208ODI.LAN) installation information file for Netware Server 4.11, DOS32, Microsoft Windows 3.x. 1208ODI.INF Driver (1208ODI.LAN) installation information file for Microsoft Windows 95. ------------------------------------------------------------------------------- B. Driver Installation for DOS32 1. If you have finished installing the Netware Client 32 for DOS, all you have to do is modify STARTNET.BAT. Please see the sample STARTNET.BAT below. If not, please follow step 2 - step 7 shown below. Sample STARTNET.BAT is as follow: SET NWLANGUAGE=English C:\NOVELL\CLIENT32\NIOS.EXE LOAD C:\NOVELL\CLIENT32\LSLC32.NLM LOAD C:\NOVELL\CLIENT32\CMSM.NLM LOAD C:\NOVELL\CLIENT32\ETHERTSM.NLM LOAD C:\NOVELL\CLIENT32\1208ODI.LAN FRAME=ETHERNET_802.2 LOAD C:\NOVELL\CLIENT32\1208ODI.LAN FRAME=Ethernet_802.3 LOAD C:\NOVELL\CLIENT32\1208ODI.LAN FRAME=Ethernet_II LOAD C:\NOVELL\CLIENT32\1208ODI.LAN FRAME=Ethernet_SNAP LOAD C:\NOVELL\CLIENT32\IPX.NLM LOAD C:\NOVELL\CLIENT32\CLIENT32.NLM C: 2. Run INSTALL.EXE from Netware DOS 32 diskette 1 (or from Netware 4.11 CD). When the product menu appears, mark the "Netware Client 32 for DOS" item, then press <Enter>. 3. Select "OTHER DRIVERS" item from the "32-bit Network Board Drivers" menu, then press <Enter>. 4. Select "USER SPECIFIED 32 BIT DRIVER." Press <Enter>. 5. Insert Accton's 10Mbps PCI Bus Ethernet Adapter Driver Diskette into your floppy diskette drive, then specify the driver path like A: or B:. 6. Follow instructions to complete the Client32 for DOS software installation. 7. Reboot your machine. C. Driver Installation for Microsoft Windows 3.x Please refer to Content B., in step 2, mark "Netware Client 32 for DOS" and "Client 32 for Windows"; in step 5, specify the driver path like A:\LANDRV32 or B:\LANDRV32. then follow steps 3..7 to complete installation. D. Driver Installation for Microsoft Windows 95 If you have installed the Microsoft Client in your Windows 95 system, you should remove the adapter object and NDIS 2/3 driver of the adapter from the Windows 95 system. If you have installed a previous Accton 10Mbps PCI Bus Ethernet Adapter NDIS 2/3 driver, you should take the following steps before installing the Accton's 10Mbps PCI Bus Ethernet Adapter Client32 driver. D.1 Remove the previously installed adapter object & driver for Accton's 10Mbps PCI Bus Ethernet Adapter, if any. ============================================================== 1. Click the "My Computer" icon in the Main Program Group. 2. Click the "Control Panel" icon in the My Computer window. 3. Click the "System" icon in the Control Panel window. 4. Click the "Network adapter" icon in the System window. 5. Click the "Accton 10Mbps PCI Bus Ethernet Adapter" icon in the System window. 6. Click the <Remove> button, then click the <OK> button. 7. Close the opened windows. D.2 Client 32 Driver Installation on Windows 95 =============================================== 8. Plug Accton's 10Mbps PCI Bus Ethernet adapter into one of the PCI slots of your PC machine. 9. Turn the power on to bootup Windows 95. 10. Windows 95 will then prompt with "Accton 10Mbps PCI Bus Ethernet Adapter" in the New Hardware Found dialog box. 11. Follow the instructions to complete installation. Note: Windows 95 will ask you to key in the proper path of the following diskette: a. Netware Client 32 for Windows 95 Disk, b. PCI-Bus Ethernet Adapter Driver Diskette --> Insert Driver Diskette, then, assign the path to A:\LANDRV32 or B:\LANDRV32 c. Windows 95 CD-ROM -- End of File --Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.