BANYAN.TXT Driver File Contents (lm336.exe)

PCMCIA Ethernet/Fax/Modem                                          May 1996

			  Banyan Vines Installation

  Contents
  ÄÄÄÄÄÄÄÄ
       Introduction
       Getting Started
       Support Options        
       Copyrights, Trademarks, and Disclaimers
  
  Introduction
  ÄÄÄÄÄÄÄÄÄÄÄÄ
       This installation assumes that the PCMCIA drivers are working 
       properly. Getting Started will describe the installation for Banyan.
  
  Getting Started
  ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
       There are two methods of copying files from the Banyan VINES
       workstation to the bootable diskette or subdirectory on the hard
       disk.
       
       Method 1:
	  Execute the 'INSTALL' command included in the diskette labeled
	   "VINES MASTER DISK".
	  Follow the given instructions for copying files.
       
       Method 2:
	  Execute the 'BAN' command.
	  Login to VINES system.
	  Execute the 'PCCOPY' command.
	  Select the 'NDIS Ethernet' option and follow the instructions
	   for copying files.
	  Insert the driver program diskette in Drive A and the prepared
	   bootable diskette in Drive B. Then, copy the appropriate NDIS
           driver file LMNDIS.DOS from Drive A to Drive B or to the
	   subdirectory of the hard disk.
	  Create a CONFIG.SYS file with the following statements:
       
       DEVICE=PROTMAN.DOS /I:A:\
       DEVICE=LMNDIS.DOS
       
       NOTE:  A:\ is the path where Banyan VINES workstation files
	      reside.
       
          Create a LMNDIS.NIF file containing the following statements:
       
       Model           = Intelligent Ethernet Fax/Modem Card
       Path            = ETHERNET\LM28
       DeviceDriver    = LMNDIS.DOS
       DeviceName      = LMNDIS$
       Type            = NDIS
       XPorts          = NETBEUI
       
       NOTE:  A:\ is the path where Banyan VINES workstation files
	      reside.
       
	Create a PROTOCOL.INI file with the following lines:
       
	     [PROTOCOL MANAGER]
	     drivername = PROTMAN$
       
	     [VINES_XIF]
	     drivername = NDISBAN$
             bindings = LM28_NIF
       
             [LM28_NIF]
             drivername = LMNDIS$
       
       Execute the 'PCCONFIG' command.
       
	     A "CONFIGURING A PC FOR THE NETWORK" message appears on the
	     screen. The program then provides some options you can select.
       
       Select "1 - Network Card Settings".
       
	     Another screen appears for selecting some options.
       
       Select "NDIS Ethernet".
       
       Select the appropriate configuration of the adapter.
       
       After configuring the adapter, you return to the main screen.
       
	     Select "2 - Login Environment Settings".
       
       From the next screen, select "NDIS Ethernet".
       
	     The 'PCCONFIG.DB' file will then be created.
       
       Reboot your computer.
       
       Login to VINES by executing the 'BAN' command.
       
  Support Options
  ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
	We are consistently improving and upgrading our drivers. you are
	welcomed at any time to browse through our BBS, and download any
	drivers, utilities and help files.

        If you still cannot get the LanModem working properly, our
	technical experts are always ready to help.  Please be at your
        computer, have your LanModem, Drivers Disk, and the following
	information available:

	* Version number of CARDEN.EXE or any drivers you are
	  running
	* The extact text of any error message displayed on your screen
	* The type of computer
	* The type of network

  Copyrights, Trademarks, and Disclaimers
  ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
  All references to MS, Windows, Win95, Windows 95, Windows NT, WinNT are
  rights reserved by Microsoft Corporation
 
  All references to Nvl., ODI, Netware, NW, IPX, IPXODI, and LSL are rights
  reserved by Novell Corporation

  Further rights reserved to their respective corporations

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web4, load: 1.05