MS Windows 95
INSTALLION
1. Insert the Installation Diskette "WIN95" in the floppy drive A: or B :
2. Boot up Windows 95. In Windows 95 "Booted" Screen, select "Start" item.
3. In "Start" Screen,select "Settings" item, slect "Control Panel" item.
4. In "Control Panel" Screen, Select "Display" icon.
5. In "Display Properites" Screen, Select "Settings" item, Select "Change
Display Type" .
6. In "Change Display Type" Screen , select "Adapter Type => Change" item.
7. In "Select Device" Screen, select "Have Disk..." item.
8. In "Install From Disk" Screen, select your driver source. e.g. A:\
9. In new "Select Device" Screen, "S3.INF" would appear and select "OK".
Then Windiows 95 would perform driver installion
10.After completing installation. Windows 95 would go back to "Change Display
Type" Screen, select"Close" item.
11.Windows 95 would go back to "Display Properties" Screen and you may select
desired resolution by changing "Desktop area" pointer. desired color by
changing "Color Palette" value, and desired font size by changing "Font
size" .
12.After completing selection, chose "Apply" to complete the whole
installation.
13.Then Windows 95 would ask, "Do you want to restat Windows ?". Choose
"Restart" to make your selection active and you may work at your selection
mode.
MS Windows 3.1
INSTALLATION
1. Insert the Installation Diskette "WIN3.1" in the floppy drive A: or B:.
2. The Installation menu will apear under this menu select what driver you
want to installed.
3. Use the up/down key highlight the Windows 3.11 and press enter,windows 3.11
driver will be installed to your system automatically.
4. After installing Windows 3.11 driver. You can install the Galileo Program,
to select any mode of operations / refresh rate and resolution under
windows 3.11.
Galileo Program
INSTALLATION
1. To install the Galileo Program, install the Installation Diskette "Galileo
Utility" in floppy drive A: or B:.
2. Boot up Windows using standard VGA mode.
3. In Windows Program Manager Screen, choose "File" item. In "Run" Screen,
key-in "A:\GAL\setup" .
The Galileo program will be installed to your system automatically. A
Group file call Display Utility will be add the your windows.
Memory Upgrade Procedures
To upgrade your S3 Trio VGA from default 1MB Memory to 2MB Memory, please
complete the following steps :
1. Turn off your system before removing the S3 Trio boar. Place the adapter
on a firm, flat, non-static hard surface.
2. Insert the 256K x 16 DRAMs into the two available 40 pin SOJ sockets,
make sure the notched edge of the chip corresponds to notch at one end
of the sockets.
3. Re-insert the card and power up your system.
TRADEMARK ACKNOWLEDGMENTS
Microsoft is a trademark of Microsoft Corporation. AutoCAD, Autoshade are
trademarks of AutoDesk Inc. Xing and XingMPEG Player are trademarks of
Xing Technology Corporation. S3 and Trio are trademarks of S3 Incorporation.
All brand names and trademarks are the property of their owners.
-- End --
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.