ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
º º
º Compex RL100ATX 10/100Base-TX PCI Fast Ethernet Adapter º
º (C) Copyright PDS, 1998. All Rights Reserved. º
º º
ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
³ INSTALLATION GUIDE ³
ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ
To install the OS/2 ODI driver, the NetWare OS/2 Requester files
should have been already installed. Please refer to the NetWare
Requester for OS/2 installation documentation for more detailed
information.
Below is the procedures to properly install OS/2 ODI driver:
1. In the Novell folder, choose the Install icon.
2. The NetWare Workstation for OS/2 Installation Utility dialog box
appears. From the Installation pull-down menu, choose "Requester on
workstation" option.
3. The Set Target Directory box appears. Click the OK button to continue.
4. From the Requester Installation dialog box, choose "Edit CONFIG.SYS and
Copy All Files..." option and click the OK button.
5. Follow Novell Installation's instrustions to complete the installation.
Driver Options
==============
1. If there is more than one RL100ATX card in your system, you must add the
following statements to the NET.CFG file:
Link Driver R100AOS2
port d000 -> selected RL100ATX card
2. If you want to create or modify the NET.CFG file, you can choose 'This
Workstation' from the 'Configuration' menu, you can use NET.CFG to set
'Full Duplex Function' and 'Line Speed'.
for example:
Link Driver R100AOS2
# The parameter 'linespeed' is used to set the line speed.
# The default value of line speed is AutoDetect.
# This adapter can be operationed in 10M or 100M Mbps. The reasonable
# values are AutoDetect(auto detect line speed by the driver), 10M or
# 100M
linespeed 10m
# The parameter 'fullduplex' is used to set the full duplex function.
# The default value of full duplex function is AutoDetect.
# This adapter can be in half or full duplex mode. In half duplex mode,
# the RL100ATX can only either transmit or receive. In full duplex mode,
# the RL100ATX can transmit and receive at the same time. The
# reasonable values are AutoDetect(auto detect full duplex function
# by the driver), Diable(disable full duplex function) and
# Enable(enable full duplex function).
fullduplex autodetect
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.