ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
º º
º Compex RL2000 PCI Ethernet Adapter º
º Copyright (C) 1996 by PDS. All Rights Reserved. º
º º
ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
³ GENERAL INFORMATION ³
ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ
1) RL2000.SYS v1.00
The NDIS3 driver v1.00 for Windows NT Workstation 3.5x, v4.0 and
Windows NT Server 3.5x, v4.0 was written to and tested with
the Network Driver Interface Specification (NDIS) Version 3.0.
2) OEMSETUP.INF
This configuration file supports both Windows NT 3.5x and
Windows NT v4.0
ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
³ INSTALLATION GUIDE ³
ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ
Windows NT4.0 Iinstallation Procedure
ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ
1. Click start in NT4.0
2. Select control panel from setting and double click network.
3. Click Adapters in Network window; click Add from Adapters menu;
click "Have Disk" in Select Network Adapter window.
4. Insert the Compex RL2000 PCI driver disk and enter the path A:\WINNT
then click OK.
5. The Select OEM Option will show as:
Choose a software supported by this hardware manufacture's disk
Compex RL2000 PCI Ethernet Adapter
Click OK.
6. Click Close of Network window.
7. Do You want to restart your computer now? Click yes.
8. After restart your computer, the RL2000 PCI LAN adapter will be opeartional.
9. Remember to create proper workgroup and share directories.
Windows NT Workstation v3.5x or Windows NT Server v3.5x
ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ
a) From Control Panel, select the Network icon and a Network Settings
dialog box appears.
b) Click the ADD ADAPTER button and a Add Network Adapter dialog
box appears.
c) Select the option, <Other> Requires Disk From Manufacturer, in
the Network Adapter Card box and a Insert Diskette dialog
box appears.
d) Insert Compex RL2000 PCI Ethernet Adapter Driver Disk into
the drive (eg. A:) and enter the full pathname of the setup file.
eg. A:\WINNT
e) A Select OEM Option box lists the adapter setup files.
Select the correct adapter and click the OK button to
proceed the installation.
f) Windows NT will copy the necessary files and start the
Compex RL2000 PCI Ethernet Adapter Setup.
g) Choose correct hardware configuration parameters and then
click OK button
ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
³ DRIVER CONFIGURATION PARAMETERS ³
ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ
In Compex RL2000 PCI Ethernet Adapter Setup box, users are required
to select correct configuration parameters for the network adapters.
Adapter Number - It specifies which adapter in the workstation
the driver takes control. The value ranges from 1 to 4.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.