ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
º º
º Compex RL2000 PCI Ethernet Adapter º
º Copyright (C) 1996 by PDS. All Rights Reserved. º
º º
ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
³ GENERAL INFORMATION ³
ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ
1) DOS NDIS 2.01 driver
RL2000.DOS v1.10
This NDIS driver for Windows For Workgroups 3,1
was written to and tested with the Network Driver Interface
Specification (NDIS) Version 2.0.1.
2) OEMSETUP.INF
It is the driver information setup file for Windows For
Workgroup 3.1.
ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
³ INSTALLATION GUIDE ³
ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ
Windows for Workgroups 3.1
ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ
a) Start Windows for Workgroups 3.1.
b) Choose the Control Panel icon in Main group window.
c) Select the Network icon and a Network Settings box
appears.
d) Under the Options option, choose the ADAPTERS button.
e) A box of all network adapters in use are listed.
Select the ADD button to add other adapters.
f) A list of available adapters is shown. If you can not
choose the adapter you want, select the Unlisted or Updated
Network Adapter option to add a new adapter.
g) Insert the driver diskette and enter the full
pathname of the directory where both OEMSETUP.INF
and RL2000.DOS can be found. Choose OK button if ready.
eg. A:\WFW31
h) The Unlisted or Updated Network Adapter box appears. Inside
this box, 'Compex RL2000 PCI Ethernet Adapter' appears
highlighted. Choose the OK button.
Note: In the case of multiple adapters, you MUST choose the SETUP
button and then select the ADVANCED button to specify the
Selected ID.
Please refer to 'DRIVER CONFIGURATION PARAMETER' section.
i) A new adapter is added to the list of available network
adapters.
j) In the Network Adapters list box, choose the Close button.
k) Choose the OK button in the Network Settings dialog box.
ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
³ DRIVER CONFIGURATION PARAMETER ³
ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ
In Compex RL2000 PCI Ethernet Adapter Setup, users are required to
select correct configuration parameter for their multiple network adapters
installed in the system.
Selected ID - It specifies which adapter the driver is going to control.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.