1. LAN.zip Driver
2. PKT.TXT File Contents

PKT.TXT Driver File Contents (LAN.zip)

            ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
            º                                                  º
            º        Compex RL2000 PCI Ethernet Adapter        º
            º  Copyright (C) 1996 by PDS. All Rights Reserved. º
            º                                                  º
            ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
³ INSTALLATION GUIDE  ³
ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ
 FTP PC/TCP Network Software For DOS
 ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ
     a) Install PC/TCP onto your system according the
        PC/TCP installation guide.

     b) Configure both Interface Software Driver and
        Protocol Driver.
     
        Use IPCONFIG.EXE to configure the Internet Protocol device
        driver, IPCUST.SYS. Similarly, use IFCONFIG.EXE to
        configure the Interface device driver,IFCUST.SYS. Please
        refer to the PC/TCP manual for further information.

     c) (This step is not required for PC/TCP version 2.10 and later.)
        After the file, CONFIG.SYS, which resides in the
        root directory of your startup disk, to install two
        device drivers, IPCUST.SYS and IFCUST.SYS. Insert the
        following two lines.

        DEVICE=[<DRIVE>]\[<PATH>]\IPCUST.SYS
        DEVICE=[<DRIVE>]\[<PATH>]\IFCUST.SYS

        NOTE: [<DRIVE>]\[<PATH>] refers to the full pathname
              of the directory containing the two device drivers.

     d) Reboot your system to load these configuration files.

     e) Load the hardware-dependant device driver included
        in the driver diskette for the network adapter.
          e.g.
                A:\PKT\RL2000PD   <ÄÄÙ Enter

     i) Before running PC/TCP applications, please load the
        Generic Kernel (ETHDRV.EXE), which will exchange
        information with the network adapter device driver.

     j) Now, you can start any PC/TCP applications.


Hint:-
       Type RL2000PD /? for help

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

• Expand the archive file (if the download file is in zip or rar format).

• If the expanded file has an .exe extension, double click it and follow the installation instructions.

• Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

• Find the device and model you want to update in the device list.

• Double-click on it to open the Properties dialog box.

• From the Properties dialog box, select the Driver tab.

• Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.