1. LAN.zip Driver
2. DOSODI.TXT File Contents

DOSODI.TXT Driver File Contents (LAN.zip)

            ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
            º                                                  º
            º        Compex RL2000 PCI Ethernet Adapter        º
            º  Copyright (C) 1996 by PDS. All Rights Reserved. º
            º                                                  º
            ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
³ GENERAL INFORMATION ³
ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ
 1) NetWare DOS (ODI) Workstation Driver
    RL2000.COM v2.00
	
    This ODI driver is for DOS workstations when using
    Novell ODI driver stack, mandatory for NetWare Lite,
    and optional for NetWare v3.1x and v4.x.
     
 2) NET.CFG

    This is a sample configuration file for DOS ODI workstation
    driver to be used with RL2000 PCI network adapters.
     
 3) RL2000.INS

    This file contains the information to be used by the
    NetWare v4.0 Client INSTALL utility for installing the DOS
    ODI workstation driver.

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
³ INSTALLATION GUIDE  ³
ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

 1) ODI Workstation in NetWare v3.1x environment
    ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ

     a) Make a directory in your hard disk, e.g. C:\NWCLIENT. Copy
        the DOS ODI workstation files into this directory.

     b) Copy the DOS ODI driver, RL2000.COM, and the NET.CFG from
        the driver diskette into this directory.

     d) To login to the server, run
          LSL
          RL2000
          IPXODI
          NETX


 2) ODI Workstation in NetWare v3.xx and v4.xx environment
    ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ

     Auto installation
     -----------------
     In a NetWare v4.xx environment, you may execute the NetWare
     v4.xx Client INSTALL.EXE utility to install the DOS
     Requester and generate the NET.CFG and CONFIG.SYS. 

     The INSTALL.EXE utility makes use of the INS file,
     RL2000.INS, to prompt for configuration parameters that will
     be copied into the NET.CFG.  

     Manual installation
     -------------------
     You may also manually execute the following steps:

     a) Make a directory in your hard disk, e.g. C:\NWCLIENT. Copy
        the DOS Requester files into this directory.

     b) Copy the DOS ODI driver and the NET.CFG file from the
        driver diskette into this directory.

     d) Your NET.CFG file may look like this:
          
          LINK DRIVER RL2000
               
          NetWare DOS Requester
               First Network Drive = F

     e) Create a batch file, Startup.bat in NWCLIENT directory and add 
        the following:-
                LSL
                RL2000
                IPXODI
                VLM or NETX
                F:
                Login

     f) Edit your Config.sys file and add the following:-
         If you are running VLM.EXE, add the statement LASTDRIVE=Z
      OR
         If you are running NETX.EXE, add the staement LASTDRIVE=E

     g) In your AUTOEXEC.BAT add the statements;

                      Path=C:\NWCLIENT;%path%
                      SET NWLANGUAGE=ENGLISH
                      @CALL STARTNET

     h) Reboot your workstation.


   Using NE2000 ODI driver with RL2000-PCI card
   ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ

    Installing NE2000 driver is similar to the above steps except
    when selecting LAN adapter you chose NE2000 or NE2000 Compatible
    driver from the adapter list.
    In addtition, using NE2000 driver requires you enter the I/O address
    and IRQ for the RL2000 adapter in the Net.cfg file.
    e.g., 
		Link Driver NE2000	
			Port E800
			Int 10
			Frame Ethernet_802.2

    Hint:-
    Run Easyset utility and record the RL2000-PCI I/O address and IRQ
    before you start any software installaion.


 Installation for other network softwares.
 ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ

  NetWare Lite v1.x environment  (also support Personal NetWare)
  ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ

     a) Follow the standard installation procedure detailed in
        your NetWare Lite manual.

     b) When prompted to select the "Network Interface Card
        Name," select the option "*OTHER CARDS."

     c) Insert the driver diskette, and press <ESCAPE>.

     d) Select RL2000.COM from the menu.

     e) Re-insert the NetWare Lite Install diskette and
        complete the installation.