1. Winbond6692.zip Driver
2. README.TXT File Contents

README.TXT Driver File Contents (Winbond6692.zip)

**************************************************************************
*                                                                        *
*   An Installation Guide for Winbond W6692 ISDN PCI Add-on Card         *
*                                                                        *
**************************************************************************

Release Date : Jul.22,2000
Version : 1.1
Tested Platform :
        H/W -- 486, Pentium-based PC system, PCI bus
        OS -- Windows NT4.0
        Driver API -- NDIS 3.0
        Application Software -- Microsoft ISDN Acceleration

A. Explanation for source files on disk
     All programs must be executed in Win NT4.0 system.
        \ : NDIS miniport driver
                - OEMSETNT.INF : driver information file (for install)
                - WB692pci.sys: driver


B. Loop test.

   Execute the file "Loopback.exe" to do the loopback test for your ISDN
   line.



C. Internet application

1. Go to "Control Panel", select "network".

2. If you do not have NT network installed, follow the setup wizard
   for the NT network setup.

3. Select "Adapter", then select "Add".

4. Do not use "Detect" command. Use "Select from the list" and select
   "Have Disk".

5. Put the diskette labeled "Winbond W6692 ISDN PCI CARD installation
   diskette" into the floppy disk drive and type in the driver name(A:).

6. Select "Winbond W6692 ISDN PCI CARD". The Windows will copy the
   files from the diskette and open a dialog windows for the ISDN line
   information.

7. If you do not have the service "Remote Access Service" installed. The
   Window will start to install the "Remote Access Service". Place the
   NT installation CD into the CD ROM and type in the path for it. The
   setup program will copy the file to install the service.

8. If the "Remote Access Service" is installed, the setup will involve
   the "Remote Access Service" configuration. Select "WB692PCI" for the
   "RAS Capable Devices". There will have two "ISDN" port available.
   Select both ISDN ports and you need to select the "Network" to
   configure the network protocol which will be used for your network
   application.

9. If the "NetBIOS Interface" does not exist in the "Control Panel/Network/
    /Services", use "Add" to add it into the service.

10. Select "Close" to finish the "Remote Access Service" setup and reboot
    the system.

11. Configure the "Dial-Up Networking" to use the "WB692PCI" port for the
    dialing out. If you need to make 128K connection, select "All
    available ISDN lines multi-linked".

12. You need to setup the "Server" inside the "Dial-Up Networking" for
    the correct network connection. Now you are ready to use Winbond
    ISDN PCI card  for the ISDN connection.