Shuttle Windows 95 driver(s) Installation Note ---------------------------------------------- IMPORTANT: ---------- IF YOU HAVE A SHUTTLE DOS REAL-MODE DRIVER INSTALLED IN YOUR CONFIG.SYS AND AUTOEXEC.BAT, REMOVE (REM-OUT) THE RELATED STATEMENTS FROM CONFIG.SYS AND AUTOEXEC.BAT AND REBOOT THE SYSTEM BEFORE INSTALLING THE WINDOWS 95 DRIVER. CD-ROM USERS, PLEASE MAKE SURE TO REMOVE "MSCDEX.EXE" FROM AUTOEXEC.BAT AND RESTART THE COMPUTER BEFORE ATTEMPTING TO INSTALL WINDOWS 95 DRIVER. INSTALLING the WINDOWS 95 DRIVER ---------------------------- 1. Click on the "Start" button found at the bottom left hand corner of the main Screen. 2. From the menu displayed, Click on "Setting" option and then click on the "Control Panel" option. 3. Click on the "Add New Hardware" Icon from the Control Panel group. 4. From the Window displayed, click on "Next>" button. 5. Then choose "No" to "Do you want Windows to search your new hardware?" and click on "Next>" button. 6. Choose "SCSI Controller" from the list of Hardware types displayed and double click. 7. Click on "Have disk" button. 8. Insert the driver diskette into the floppy drive or provide the path where the driver file is located and click on "OK" button. At this point, the Shuttle adapter(s) is displayed. Choose the appropriate adapter type. 9. Click on "Next>" button and then the "Finish" button. 10. The driver is copied to your system, and added to the installed device list. This may take few seconds, so standby until the screen changes. Clicking on "Finish" icon more than once may result in adding the hardware more than once, so make sure to avoid this. This completes the Win 95 driver installation.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.