IBMOS2SV.TXT Driver File Contents (OfficeLan10-100.zip)

    Driver Installation - IBM LAN Server OS/2 Driver
  ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

  Siemens OfficeLAN PCI 10/100 TX Fast Ethernet Adapter

  IBM LAN Server v2.0 and v3.0 OS/2 Driver
  INSTALLATION GUIDE


=============================================================================
CONTENTS
=============================================================================

*  Important Considerations

*  Files Provided

*  Device Driver Installation Guide For LAN Server 2.0 or 3.0

*  Device Driver Installation Guide For LAN Server 4.0

=============================================================================
IMPORTANT CONSIDERATIONS
=============================================================================

*  This driver conforms to the Network Driver Interface Specification (NDIS)
    v2.0.1 defined by Microsoft/3Com. The driver has been tested with
    Microsoft LAN Manager, 3Com 3+Open, IBM LAN Server, IBM PC LAN
    Program, DEC Pathworks, and other NDIS-compatible network operating
    systems and protocol stacks.

*  The PROTOCOL.INI file contains configuration information.

=============================================================================
FILES PROVIDED
=============================================================================

*  L100.OS2           OS/2 NDIS2 driver.
*  L100.NIF           Network information file.
*  PROTOCOL.INI       Driver operational parameters and binding
                       information file.

=============================================================================
DEVICE DRIVER INSTALLATION GUIDE For LAN Server 2.0 or 3.0
=============================================================================

1.  Insert the IBM LAN Adapter Protocol Support (LAPS) v1.00 diskette
     into your computer floppy drive.

2.  Type LAPS and press [Enter].

     The IBM logo appears.

3.  Click on the INSTALL button.

4. Specify the target drive (typically C:\) and press [Enter] or select OK.

    The files are copied to the target drive

5.  Select OK.

6.  Select the INSTALL button a second time to load the drivers

7.  Press [Enter].

9.  Place the ConfigDisk in drive A:.

10. Change the "Install Additional Network Driver" panel to "A:\NDIS\OS2"
      and select OK.

11. Press OK for each driver.

12. Select the Configure button.

13. Select "Configure LAN transports".

14. Select Continue.

      The Configure Workstation screen appears.

15. In the Network Adapters window, select "Siemens OfficeLAN PCI 10/100 TX
      Fast Ethernet Adapter".

16. Select the Add button.

    This adapter name appears in the Current Configuration window.


17. If you want to enable "RIPL" features, select "IBM IEEE 802.2"
      from the Protocols window, then select the Add button.

18. Select "IBM OS/2 NETBIOS", then select the Add button.

      (You also may need to select the "IBM NetWare Requester" option,
      then the Add button, depending on your network.)

     Each time you select the Add button, the selected option appears in the
     Current Configuration window below the chosen driver.

19. Select OK.

20. Select Exit.

    The CONFIG.SYS Update screen appears.

21. Specify the drive for the CONFIG.SYS file.

22. Select the Continue button.

23. Select OK.

24. Select Exit.

25. Reboot your computer. Use the OS/2 Shutdown process to exit from
      the program.

This completes the LAPS installation procedure.

See the IBM server installation procedure guides to install an OS/2 server.

=============================================================================
DEVICE DRIVER INSTALLATION GUIDE For LAN Server 4.0
=============================================================================

Before you start the installation processes, make sure that OS/2 LAN Server
is properly installed. And your adapter should also be ready on system.

1. In OS/2 window, click the "MPTS" icon.

        The IBM logo appears.

2. Select install button.

3. Insert the released diskette, specify the dirver path

        A:\NDIS\OS2 and press <Enter>

4. When installation completed, select "Configure" button.

5. Choose "Siemens OfficeLAN PCI 10/100 TX Fast Ethernet Adapter" from
   "Network Adapters" sub-window. Click "Add" to add the Adapter to "Current
   Configuration".

6. Bind protocols you need to complete the installation.

=============================================================================

This software and documentation have restricted rights: their use, duplication,
or disclosure by the Government is subject to the restrictions in:

*  DFARS 252.227-7013
    Subparagraph (c) (1) (ii)
    Rights in Technical Data and Computer Software clause

*  FAR 52.227-14
    Alternate III
    Rights in Data -- General clause

*  FAR 52.227-19
    Subparagraphs (c) (1) and (2)
    Commercial Computer Software -- Restricted Rights clause


Other product and company names are registered trademarks or trademarks of
their respective holders.

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web5, load: 0.44