D-Link DFE-530TX PCI Fast Ethernet Adapter Installation for SCO OpenServer V5.0 MDI Driver Getting Started --------------- 0. Login as root user. (On maintenance mode) 1. Use "custom" to install the driver 1.1 Prepare an image file Copy d5B.IMG onto SCO OpenServer and rename it to VOL.000.000 # mkdir /usr/test # doscp a:/<PATH>/d5B.IMG /usr/test/VOL.000.000 * <PATH> is the driver directory. 1.2 Execute "custom" /* A menu selection screen will be popped up */ Use [->] key to move cursor to "Software" menu item. Press [] key to get into pull down menu. Move to "Install New..." then press [ENTER] key. ÉÍÍÍÍÍÍÍÍÍÍ Begin Installation on scoopen ÍÍÍÍÍÍÍÍÍÍ» º º º What host (machine) do you want to install from? º º º º ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ º º ³<*> From scoopen ³ º º ³< > From another host ³ º º ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ º º º ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ º[ Continue ] [ Cancel ] [ Help ]º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ Select "From scoopen" and use [TAB] key to move cursor to [ Continue ]. Press [ENTER] key and press [] key to get into pull down menu. ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Select Media ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º º º Insert media, and select media device. º º º º ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ º º Media Device:³|Floppy Disk Drive 0_____________________|v³ º º ÀÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ º º ºÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿º º º º³*Floppy Disk Drive 0 ³º º º º³ Media Images ³º º ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ º[ Continue ] ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ [ Help ]º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ Select "Media Images" and use [TAB] key to move cursor to [ Continue ]. Press [ENTER] key and press [ENTER] key again. ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Enter Image Directory ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º º º Enter the full path to the directory containing media images. º º º º Image Directory: |/usr/test__________________________________________| º º º º Note: media images must follow the naming convention VOL.000.000, etc. º º º º º º º ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ º[ OK ] [ Cancel ] [ Help ]º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ Input the path name where VOL.000.000 is located as above path name is /usr/test. ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Install Preference on scoopen ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º º ºInstalling: D-Link DFE-530TX PCI Fast Ethernet Device Driver (version 1.º º º ºDo you want a FULL or PARTIAL installation? º º º ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ º[ Full ] [ Partial ] [ Cancel ] [ Help ]º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ Use [TAB] key to move cursor to [ Full ] then press [ENTER] key. After the installation progress the following message is displayed, ÉÍÍÍÍÍÍÍÍÍÍÍ Message ÍÍÍÍÍÍÍÍÍÍÍ» º Installation complete º ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ º [ OK ] º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ press [Enter] key. You will find out that D-Link DFE-530TX PCI Fast Ethernet Device Driver (ver 1.1.3) is added to the package list. Use [<-] key to move cursor back to "Host" menu item. Press [] key to get into pull down menu then move to "Exit". Press [ENTER] key. Now that the driver is installed in the system successfully. 2. Use "netconfig" to configure the network driver /* A menu selection screen will be popped up. */ At "Hardware" menu item press [] key to get into pull down menu. Move to "Add new LAN adapter" then press [ENTER] key. If you got a PCI NIC inserted on your machine, it will list as following: ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Add new LAN adapter ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» ºThe following adapters have been found: º ºÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿º º³* D-Link DFE-530TX PCI Fast Ethernet Adapter Compatible - PCI Bus 0,³º º³ ³º º³ ³º º³ ³º º³ ³º ºÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙº º[ Configure hardware not listed above... ] º ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ º[ Continue ] [ Cancel ] [ Help ]º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ If the "D-Link DFE-530TX PCI Fast Ethernet Adapter..." has been displayed, press [ENTER] directly. Otherwise using [TAB] key to move to "Configure hardware not listed above..." then press [ENTER] key. ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Add new LAN adapter ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» ºSelect network adapter to be added: º ºÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿º º³* 3Com EtherLink 16/16TP Adapter ^º º³ . *º º³ . *º º³ . *º º³ . *º º³ . *º º³ . *º º³ . *º º³ D-Link DFE-530TX PCI Fast Ethernet Adapter *º º³ . ³º º³ . ³º º³ . ³º º³ . ³º º³ . ³º º³ . vº ºÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙº ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ º[ Continue ] [ Cancel ] [ Help ]º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ Use [] key to move to "D-Link DFE-530TX PCI Fast Ethernet Adapter". Press [ENTER] key. ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Network Driver Configuration ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º º ºEnter the configuration of D-Link DFE-530TX PCI Fast Ethernet Adapter: º º º º ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ [ Advanced ]º º PCI Bus: ³| 0_____________________________________|v³ Options... º º ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ º º ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ º º Device: ³| 0_____________________________________|v³ º º ÀÉÍÍÍÍÍÍÍÍ»ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ º º ÚºÚÄÄÄÄÄÄ¿ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ º ºFunction: ³º³ 9 ^º______________________________|v³ º º Àº³ 10 ³ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ º º º³ 11 ³º º º * - indicº³ 12 *ºict with other hardware º ºÄÄÄÄÄÄÄÄÄÄÄĺ³* 13 *ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ º[ OK ] º³ 14 vº [ Cancel ] [ Help ]º ÈÍÍÍÍÍÍÍÍÍÍÍͺÀÄÄÄÄÄÄÙºÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ ÈÍÍÍÍÍÍÍͼ The above screen let you fill the information of where your PCI adapter is located by specifying PCI Bus number, PCI Device number and PCI Function number. Note1: If you can not make sure the PCI parameters or your PCI Device number can not be found in the list, just leave them as default values, continue the following installation. After the driver is installed, system is re-linked and reboot the system, driver will search PCI Ethernet card automatically. "Advanced Options" let you specify what media type is connected and flow control be enable or not. If you select it, the following screen will be popped up. ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Advanced Network Driver Configuration ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º º ºEnter the configuration of D-Link DFE-530TX PCI Fast Ehternet Adapter: º º º º ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ º ºMedia/Cable Type: ³| Auto_________________|v³ º º ÀÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»ÄÄÄÄÄÄÄÄÄÙ º º Úº ÚÄÄÄÄÄÄÄÄÄÄÄ¿ºÄÄÄÄÄÄÄÄÄ¿ º º Flow Control: ³º ³* Auto ³º_______|v³ º º Àº ³ TP ³ºÄÄÄÄÄÄÄÄÄÙ º º º ³ TP_FD ³º º º * - indicates conº ³ TX100 ³ºr hardware º ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ ³ TX100_FD ³ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ º[ OK ] º ÀÄÄÄÄÄÄÄÄÄÄÄÙºcel ] [ Help ]º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÈÍÍÍÍÍÍÍÍÍÍÍÍÍͼÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ Select the connective media. Use [TAB] key to set Flow Control enable or disable. ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Advanced Network Driver Configuration ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º º ºEnter the configuration of D-Link DFE-530TX PCI Fast Ehternet Adapter: º º º º ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ º ºMedia/Cable Type: ³| Auto_________________|v³ º º ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ º º ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ º º Flow Control: ³| Disable______________|v³ º º ÀÉÍÍÍÍÍÍÍÍÍÍÍÍÍ»ÄÄÄÄÄÄÄÄÄÄÙ º º º ÚÄÄÄÄÄÄÄÄÄÄ¿º º º * - indicates conº ³* Disable ³ºer hardware º ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ ³ Enable ³ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ º[ OK ] º ÀÄÄÄÄÄÄÄÄÄÄÙºncel ] [ Help ]º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÈÍÍÍÍÍÍÍÍÍÍÍÍͼÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ Press [ENTER] key to go back to "Network Driver Configuration" screen. Use [TAB] key to move cursor to "OK" then press [ENTER] key. ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Information ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º--- Please verify adapter is set to the configuration just entered º ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ º [ OK ] º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ Press [ENTER] key. ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Add Protocol ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» ºSelect one networking product to be added to º ºD-Link DFE-530TX PCI Fast Ethernet Adapter: º ºÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿º º³ HW D-Link DFE-530TX PCI Fast Ethernet Adapter ³º º³* - SCO IPX/SPX ³º º³ - SCO TCP/IP ³º º³ ³º º³ ³º ºÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙº ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ º[ Add ] [ Cancel ] [ Help ]º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ Use [] key to move cursor to "SCO TCP/IP" then press [ENTER] key. ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ SCO TCP/IP Configuration ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º º º º º Local Host Name: |scoopen_____________| [ Advanced ]º º IP Address: |192.9.200.1_________| Options... º º Netmask: |255.255.255.0_______| º ºBroadcast Address: |192.9.200.255_______| º º Domain Name: |scoopen.com_________| º º TCP connections: |256_________________| º º Pseudo ttys: |32__________________| º º º º º ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ º [ OK ] [ Cancel ] [ Help ]º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ Input the required information. Use [TAB] key to move cursor to "OK" then press [ENTER] key. ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Message ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º The following products were successfully configured into the system º º SCO TCP/IP º º D-Link DFE-530TX PCI Fast Ethernet Adapter - PCI Bus 0,Device 0,Functioº º º ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ º[ OK ] [ Help ]º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ Press [ENTER] key. At "Hardware" menu item, press [] key to get into pull down menu. Move to "Exit" then press [ENTER] key. ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Question ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º The Unix Kernel must be re-linked before the changesº º??? made here will have an effect. º º Do you want to re-link the kernel now? º ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ º[ Yes ] [ No ]º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ Press [ENTER] key. Do you want this kernel to boot by default (y/n) y Do you want the kernel environment rebuilt (y/n) y 3. Reboot unix # shutdown -y -g0 *************************************************** * Another way to specify driver's PCI parameters * *************************************************** . Another way to modify PCI parameters is setting at booting time, shown as below: 1. Specify PCI Bus#, PCI Device# and PCI Function# Boot : unix net.mdi=d5B(0) net.param=(pcb:0,pcd:14,pcf:0) 2. Auto-search PCI adapter card Boot : unix net.mdi=d5B(0) Note2: The IRQ number must match with the value set in ROM-BIOS before you specify this value, please check it. The IRQ for PCI bus can be accessed by pressing [DEL] key when system is power on and choose the proper select item to set IRQ for PCI bus. Example: ROM PCI/ISA BIOS (2A4X5C31) PCI/GREEN FUNCTION SETUP AWARD SOFTWARE, INC. Press [DEL] key --> PCI/GREEN FUNCTION SETUP Slot 3 Using INT# : A-PIRQ1 . . . PIRQ1# Connect IRQ: 5 By Single ~Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.