README.TXT Driver File Contents (000315.zip)

                 D-Link DFE-530TX PCI Fast Ethernet Adapter

 Contents
 --------

    - Introduction
    - Getting Started
    - Revision History
    - Support Options
    - Copyrights and Trademarks

 Introduction
 ------------

 To help your friendly installation, you can check it from the
 REAMDE.TXT files.  Should there be any further recommendations,
 please contact with the Local D-Link office listed as below.


 Getting Started
 ---------------

    INSTALL.EXE  assist your ease of setup.  INSTALL will configure
    driver, install appropriate network drivers for popular network
    operating systems, and run diagnostics on the DFE-530TX adapter.


    To run INSTALL, simply run INSTALL.EXE program in the root 
    of the driver diskette.  (ie. A:\INSTALL  <Enter>)

    If the NOS (Network Operating System) you are using is not covered
    by the installing program, please refer to the individual documentation
    provided in each NOS directory.


 Revisions History
   Diskette revision: 20000301
    ---------------------------
    -- Flow control function update.
    
    Diskette revision: 20000201
    ---------------------------
    -- Support DFE-530TX A1 and B1
    -- Support WOL, Flow control (DFE-530TX B1 hardware only)

    Diskette revision: 991215
    -------------------------
    -- Support Windows 2000 driver. 
    
    Diskette revision: 990615
    -------------------------
    -- Add NDIS5 drivers for Win98 root file
    -- Win95A/Osr2/Win98 use NDIS3 driver 
       and the same INF file in the root path.

    Diskette revision: 981115
    -------------------------
    --Update NDIS3 and NDIS4 drivers.
    --Update Packet driver.

    Diskette revision: 980915
    -------------------------
    --To update NetWare server driver. 
  
    Diskette revision: 980815
    -------------------------
     --Supports NetWare5.0 driver.
     --To solve "Windows Protection Error" problem.     

    Diskette revision: 980601
    --------------------------
      To solve NEC NX compatible issue under NDIS3 and  NDIS4 drivers.

    Diskette revision: 980515
    -------------------------
      To update Novell NetWare server, NDIS2 and Packet drivers.

    Diskette revision: 980501
    -------------------------
      It supports drivers as the following list.
      --Installation program.
      --Diagnostics program.
      --Novell NetWare 3.12, 4.x, ODI.DOS.
      --Microsoft Windows NT3.51, NT4.0.
      --Windows 95, 98.
      --Microsoft Windows for Workgroups 3.11.
      --IBM LAN Support Program v1.3x.
      --DECnet PathWorks v4.0.
      --Banyan VINES v4.00(2).
      --WIN/TCP PathWay Access for DOS v1.1.
      --FTP PC/TCP.
      --SUN PC-NFS.
      --SCO OpenServer 5.0.
      --NDIS 2.x, 3.x, 4.x Driver.
      --Packet Driver.

    Diskette revision : 980315
    --------------------------
      It supports drivers as the following list.
      --Novell NetWare 3.12, 4.x, ODI.DOS.
      --Microsoft Windows NT3.51, NT4.0.
      --Windows 95, 98.


 Trouble shouting
 ----------------
 During testing of the WOL feature of the DFE-530TX.B1, if you discover  
 the following phenomena:

 1) In WIN98(SE) or WIN2000, if the user turns the Stand By using the normal 
    procedure (PC enters D3 hot mode), then the card can be remote awakened 
    successfully (while the PC is in D3 hot mode).

 2) If the DFE-530TX.B1 encounters either of the following power-off 
    situations: 
    (a) sudden, abnormal power-down, or (b) PC freezes suddenly (PC enters 
        into D3 cold mode), then the WOL function fails.
    
    For the second situation, there are two workarounds to re-enable the 
    WOL function:
  
    1. Restart the PC ->
       The PC will scan the harddisk and file system automatically ->
       After the OS is rebooted successfully, turn the Stand By using 
       the normal procedure(cause the PC to enter D3 hot mode).

    2. Restart the PC ->
       Enter DOS mode immediately ->
       Use the Setup utility ( please contact with the local D-Link's OBU )
       to re-enable the WOL function (cause the PC to enter D3 hot mode).



 Support Options
 ---------------

    For technical support, you may contact your authorized D-Link
    distributor, dealer or the following D-Link branch offices.

    U.S.A.          Web Site:  http:\\www.dlink.com
                    Tel: +1(949)788-0805    Fax: +1(949)753-7033
                        
    Canada          Web Site:  http:\\www.dlinknet.com
                    Tel: +1(905)829-5033    Fax: +1(905)829-5223
                        
    U.K. & Europe   Tel: +44(181)235-5555   Fax: +44(181)235-5500
                        
    Germany         Tel: +49(6192)97110     Fax: +49(6192)971111

    Asia, Taiwan    Web Site:  http:\\www.dlink.com.tw
                    Tel: +886(2)916-1600    Fax: +886(2)914-6299
                        
    France          Web Site:  http:\\www.dlink-france.com 
                    Tel: +33(1)3023-8688    Fax: +33(1)3023-8689
        
    Sweden          Tel: +46(8)700-6211     Fax: +46(8)219-640

    Denmark         Tel: +45(43)969-040     Fax: +45(43)424-347

    Australia       Web Site:  http:\\www.dlink.com.au
                    Tel: +61(2)9417-7100    Fax: +61(2)9417-1077
                        
    Singapore       Tel: +65-774-6233       Fax: +65-774-6322
                        
    China           Web Site:  http:\\www.dlink.com.cn
                    Tel: +86(10)6846-7106~9 Fax: +86(10)6846-7110

    Japan           Web Site:  http:\\www.d-link.co.jp 
                    Tel: +81(3)5434-9678    Fax: +81(3)5434-9868

    India           Tel: +91(22)652-6578    Fax: +91(22)652-8476

    Itlay           Tel: +39-2-2900-0676    Fax: +39-2-2900-1723   
       
    Egypt           Web Site:  http:\\www.dlink-me.com
                    Tel: +202-245-6176      Fax: +202-245-6192     


    The BBS communication setup information is as follows :

    Speed     :  2400-14400  baud                           - Germany
                 2400-9600   baud                           - Asia,Taiwan
                 14400-16800 baud                           - Canada
                 9600-14400  baud V32, V32bis, V42, V42bis  - U.S.A.
                 2400-19200  baud V24, V32, V32bis, V42bis  - U.K. & Europe
    Parity    : none
    Data bits : 8
    Stop bit  : 1

 Copyrights, Trademarks
 ----------------------

 All documents and software provided herewith are Copyright (c) 2000
 D-Link Corporation. All rights reserved.

 MS, Windows, Windows 95, Windows 98, Windows NT are tradenames of
 Microsoft Corporation.

 NetWare, IPX are tradenames of Novell.

 Other trademarks or tradenames used herein are properties of the
 respective owners.


Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web4, load: 0.68