README.TXT Driver File Contents (T210.zip)

 
Windows 95
----------

Location of driver:

                \WIN95\EZNDND3.SYS


NOTE: 
-----
      Boot up Windows 95 system, goto "Control Panel" and make sure the 
      PC Card(PCMCIA) program  is working properly. If you can not see this 
      icon, refer to Windows 95 user's guide to install the Socket Service,
      Card Service programs for your Windows 95 system. 
      
  


Installion Procedures:

        1. Go to the "Control Panel", click the "System" icon.

        2. Click "Device Manager" from System window.

        3. Select all the unavailable network adapters and remove it.
           (Windows 95 system will mark the invalid network adapter by "X"
           or "!")

        4. Shutdown the Windows 95 system.

        5. Restart the system, Windows 95 will prompt the following message and
           request user to install the driver from the diskette.

                   Found New Hardware 

		"PCMCIA-ETHERNET CARD"
		
                If the system has prompted the above message, go to step 7.

        6. If the system not ask you to install the driver, go to "Control
           Panel" and click "Add New Hardware". When the system has finished
           process, repeat step 4 and continue installation.

        7. Insert the driver diskette, install the driver to system properly.

        8. When completed the driver installation, restart the Windows 95 to
           take effect.


OSR2 Version Installation
-------------------------

        1. Go to the "Control Panel", click the "System" icon.

        2. Click "Device Manager" from System window.

        3. Select all the unavailable network adapters and remove it.
           (Windows 95 system will mark the invalid network adapter by "X"
           or "!")

        4. Shutdown the Windows 95 system.

        5. Restart the system, Windows 95 will prompt the following message and
           request user to install the driver from the diskette.

               Found New Hardware Controller 

		"PCMCIA-ETHERNET CARD"
		

                If the system has prompted the above message, go to step 7.

        6. If the system not ask you to install the driver, go to "Control
           Panel" and click "Add New Hardware". When the system has finished
           process, repeat step 4 and continue installation.

        7. While system prompts the message to ask you to install driver,
           insert the PCMCIA Ethernet Card's Driver Diskette then
           select "Next" in new hardware wizard icon to contiune.

        8. Windows 95 system will show you message as "Could not found the
           device driver". You will need to select "Other Location" icon
           to continue install the driver.

        9. In "other location" icon specify "A:\WIN95" to continue.

        10. Windows 95 system will show message as found "10BASE PCMCIA 
	    Ethernet Adapter", select "Finish" to starting copy driver and 
	    relative files to system.

        11. When completed the driver installation, restart the Windows 95 to
            take effect.

---------------------------------[ END ]--------------------------------------


Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web1, load: 1.01