; /**************************************************************************** ; ** THIS FILE IS Installation file for the DM9 Based Fast ** ; ** Ethernet PCI Adapter. ** ; ** Add ACPIEnable parameter to registry. ** ; ** V1.04 ** ; ** .Add NDIS2 driver ** ; ** Vendor ID ** ; ** V1.05 - (1) Don't check SubVendor ID ** ; ** (2) Change Signature for Windows 2000 ** ; ** ** ; ** V1.06 - 11/17/99 Simoncc ** ; ** Combine all inf files, except of oemsetup.inf for NT 3.51/4.0 ** ; ** Add a network installer (DM9NDI.DLL) ** ; ** V1.07 - 11/24/99 Simoncc ** ; ** Add a CoInstaller for Windows 2000 (DM9INST.DLL) ** ; ** ** ; ** V1.08 - 05/24/00 Simoncc ** ; ** Re-range the sections of this file ** ; ** ** ; ** V1.09 - 06/29/00 Simoncc ** ; ** Supporting Half/Full Based Switching Adapters ** ; ** Adding two parameters "Tx HPNA Remote Command" ** ; ** and "Rx HPNA Remote Command" ** ; ** V1.10 - 08/17/00 Simoncc ** ; ** Fixed problems of inf during certification ** ; ** ** ; ** V1.11 - 08/25/00 Simoncc ** ; ** Supporting 10 Based-T PCI Adapter ** ; ** ** ; ** V1.12 - 12/01/00 Spenser ** ; ** (1) Set default value of "PME" parameter to "ALL". ** ; ** (2) Set defualt value of "Store&Forward" to "Disable". ** ; ** (3) Add "Pattern&Magic Packet" to "ACPIEnable" ** ; ** (4) Check wakeup from StandBy ** ; ****************************************************************************/ [Version] Signature = "$Windows NT$" Class = Net ClassGUID = {4d36e972-e325-11ce-bfc1-08002be10318} Provider = %V_DSI% DriverVer = 08/25/2000, 1.11.00.0825 CatalogFile = dm9102.cat [Manufacturer] %V_DSI% = DAVICOM [ControlFlags] ExcludeFromSelect = PCI\VEN_1282&DEV_9102, \ PCI\VEN_1282&DEV_9102&SUBSYS_82120291, \ PCI\VEN_1282&DEV_9102&SUBSYS_82120198, \ PCI\VEN_1282&DEV_9102&SUBSYS_82120298, \ PCI\VEN_1282&DEV_9102&SUBSYS_82120398, \ PCI\VEN_1282&DEV_9102&SUBSYS_82120498, \ PCI\VEN_1282&DEV_9102&SUBSYS_82120391, \ PCI\VEN_1282&DEV_9102&SUBSYS_82120491, \ PCI\VEN_1282&DEV_9009&SUBSYS_82120990 [DAVICOM] ; DisplayName Section DeviceID ; ----------- ------- -------- %DM9102.DeviceDesc% = DM9102.ndi, PCI\VEN_1282&DEV_9102&SUBSYS_82120291 %DM9EHR.DeviceDesc% = DM9102EH.ndi, PCI\VEN_1282&DEV_9102&SUBSYS_82120198 %DM9ELR.DeviceDesc% = DM9102EH.ndi, PCI\VEN_1282&DEV_9102&SUBSYS_82120298 %DM9HR.DeviceDesc% = DM9102H.ndi, PCI\VEN_1282&DEV_9102&SUBSYS_82120398 %DM9LR.DeviceDesc% = DM9102H.ndi, PCI\VEN_1282&DEV_9102&SUBSYS_82120498 %DM9HSW.DeviceDesc% = DM9102SW.ndi, PCI\VEN_1282&DEV_9102&SUBSYS_82120391 %DM9FSW.DeviceDesc% = DM9102SW.ndi, PCI\VEN_1282&DEV_9102&SUBSYS_82120491 %DM9009.DeviceDesc% = DM9009.ndi, PCI\VEN_1282&DEV_9009&SUBSYS_82120990 %DM9GEN.DeviceDesc% = DM9102EH.ndi, PCI\VEN_1282&DEV_9102 ;============================================================================= ; ; WIN9x ; ;============================================================================= [DM9102.ndi] AddReg = DM9102.id.reg, DM9102.pci.reg, DM9102.con.reg, DM9102.confe.reg, DM9102.win.reg, DM9102.con.win.reg CopyFiles = dm9pci.win.CopyFiles, dm9ndi.dll.CopyFiles, 9102.ndis2.CopyFiles [DM9102EH.ndi] AddReg = DM9102.id.reg, DM9102.pci.reg, DM9102.con.reg, DM9102.confe.reg, dm9102.hpna.reg, DM9102.win.reg, DM9102.con.win.reg, DM9102.hpna.param.reg, DM9102.hpna.win.reg CopyFiles = dm9pci.win.CopyFiles, dm9ndi.dll.CopyFiles, 9102.ndis2.CopyFiles [DM9102H.ndi] AddReg = DM9102.id.reg, DM9102.pci.reg, DM9102.hpna.con.reg, dm9102.hpna.reg, DM9102.win.reg, DM9102.hpna.win.reg CopyFiles = dm9pci.win.CopyFiles, dm9ndi.dll.CopyFiles, 9102.ndis2.CopyFiles [DM9102SW.ndi] AddReg = DM9102.id.reg, DM9102.pci.reg, DM9102.win.reg CopyFiles = dm9pci.win.CopyFiles, dm9ndi.dll.CopyFiles, 9102.ndis2.CopyFiles [DM9009.ndi] AddReg = DM9009.id.reg, DM9102.pci.reg, DM9102.con.reg, DM9102.win.reg, DM9102.con.win.reg CopyFiles = dm9pci.win.CopyFiles, dm9ndi.dll.CopyFiles, 9102.ndis2.CopyFiles ;============================================================================= ; ; WINNT specific entry ; ;============================================================================= [DM9102.ndi.NT] Characteristics = 0x84 BusType = 5 AddReg = DM9102.id.reg, DM9PCI.reg, DM9102.pci.reg, DM9102.con.reg, DM9102.confe.reg CopyFIles = DM9PCI.CopyFiles, DM9PCI.DLL.CopyFiles [DM9102EH.ndi.NT] Characteristics = 0x84 BusType = 5 AddReg = DM9102.id.reg, DM9PCI.reg, DM9102.pci.reg, DM9102.con.reg, DM9102.confe.reg, DM9102.hpna.reg, DM9102.hpna.param.reg CopyFIles = DM9PCI.CopyFiles, DM9PCI.DLL.CopyFiles [DM9102H.ndi.NT] Characteristics = 0x84 BusType = 5 AddReg = DM9102.id.reg, DM9PCI.reg, DM9102.pci.reg, DM9102.hpna.con.reg, DM9102.hpna.reg CopyFIles = DM9PCI.CopyFiles, DM9PCI.DLL.CopyFiles [DM9102SW.ndi.NT] Characteristics = 0x84 BusType = 5 AddReg = DM9102.id.reg, DM9PCI.reg, DM9102.pci.reg CopyFIles = DM9PCI.CopyFiles, DM9PCI.DLL.CopyFiles [DM9009.ndi.NT] Characteristics = 0x84 BusType = 5 AddReg = DM9009.id.reg, DM9PCI.reg, DM9102.pci.reg, DM9102.con.reg CopyFIles = DM9PCI.CopyFiles, DM9PCI.DLL.CopyFiles [DM9102.ndi.NT.Services] AddService = DM9102, 2, DM9102.Service, common.EventLog [DM9102EH.ndi.NT.Services] AddService = DM9102, 2, DM9102.Service, common.EventLog [DM9102H.ndi.NT.Services] AddService = DM9102, 2, DM9102.Service, common.EventLog [DM9102SW.ndi.NT.Services] AddService = DM9102, 2, DM9102.Service, common.EventLog [DM9009.ndi.NT.Services] AddService = DM9102, 2, DM9102.Service, common.EventLog [DM9PCI.CopyFiles] DM9PCI5.SYS,,,2 [DM9PCI.DLL.CopyFiles] DM9Inst.DLL,,,2 ;============================================================================= ; ; Win9x id registry sections ; These are not needed by NT ; ;============================================================================= [DM9102.id.reg] HKR, Ndi, DeviceID, 0, "PCI\VEN_1282&DEV_9102" HKR,,AdapterPCIID,0,"91021282" [DM9009.id.reg] HKR, Ndi, DeviceID, 0, "PCI\VEN_1282&DEV_9009" HKR,,AdapterPCIID,0,"90091282" ;============================================================================= ; ; Win9x flags section ; Flags are not needed by NT ; ;============================================================================= ;**************************************************************************** ; PCI common parameters ;**************************************************************************** [DM9102.pci.reg] ;params HKR, , AdapterType, 0,"5" HKR, , BusType, 0,"5" ;; PCI HKR, , PnPCapabilities,0x00010001, "0x20" ;StoreAndForward HKR, Ndi\params\StoreAndForward, ParamDesc, 0,"Store And Forward" HKR, Ndi\params\StoreAndForward, default, 0,"0" HKR, Ndi\params\StoreAndForward, type, 0,"enum" HKR, Ndi\params\StoreAndForward\enum, 0, 0,"Disabled" HKR, Ndi\params\StoreAndForward\enum, 1, 0,"Enabled" ;Transmit Threshold HKR, Ndi\params\TransmitThreshold, ParamDesc,,"Transmit Threshold" HKR, Ndi\params\TransmitThreshold, default, 0,"200" HKR, Ndi\params\TransmitThreshold, type, 0,"enum" HKR, Ndi\params\TransmitThreshold\enum, 48, 0," 72 bytes" HKR, Ndi\params\TransmitThreshold\enum, 60, 0," 96 bytes" HKR, Ndi\params\TransmitThreshold\enum, 80, 0," 128 bytes" HKR, Ndi\params\TransmitThreshold\enum, A0, 0," 160 bytes" HKR, Ndi\params\TransmitThreshold\enum, 100, 0," 256 bytes" HKR, Ndi\params\TransmitThreshold\enum, 200, 0," 512 bytes" HKR, Ndi\params\TransmitThreshold\enum, 400, 0,"1024 bytes" ;ACPI Enable/Disable HKR,Ndi\params\ACPIEnable,ParamDesc,,"PME" HKR,Ndi\params\ACPIEnable,default,,"4" HKR,Ndi\params\ACPIEnable,type,,"enum" HKR,Ndi\params\ACPIEnable\enum,0,,"Disabled" HKR,Ndi\params\ACPIEnable\enum,1,,"Link Change" HKR,Ndi\params\ACPIEnable\enum,2,,"Magic Packet" HKR,Ndi\params\ACPIEnable\enum,3,,"Pattern Match" HKR,Ndi\params\ACPIEnable\enum,4,,"ALL" HKR,Ndi\params\ACPIEnable\enum,5,,"Pattern&Magic Packet" ;VLAN HKR, Ndi\params\VLan, ParamDesc, 0,"VLAN" HKR, Ndi\params\VLan, default, 0,"0" HKR, Ndi\params\VLan, type, 0,"enum" HKR, Ndi\params\VLan\enum, 0, 0,"Disabled" HKR, Ndi\params\VLan\enum, 1, 0,"Enabled" ;Tx Flow Control HKR, Ndi\params\TxFlowCtrl, ParamDesc, 0,"Transmit Flow Control" HKR, Ndi\params\TxFlowCtrl, default, 0,"0" HKR, Ndi\params\TxFlowCtrl, type, 0,"enum" HKR, Ndi\params\TxFlowCtrl\enum, 0, 0,"Disabled" HKR, Ndi\params\TxFlowCtrl\enum, 1, 0,"Enabled" ;Rx Flow Control HKR, Ndi\params\RxFlowCtrl, ParamDesc, 0,"Receive Flow Control" HKR, Ndi\params\RxFlowCtrl, default, 0,"0" HKR, Ndi\params\RxFlowCtrl, type, 0,"enum" HKR, Ndi\params\RxFlowCtrl\enum, 0, 0,"Disabled" HKR, Ndi\params\RxFlowCtrl\enum, 1, 0,"Enabled" [DM9102.con.reg] ;ConnectionType HKR, Ndi\params\ConnectionType, ParamDesc, 0,"Connection Type" HKR, Ndi\params\ConnectionType, default, 0,"0" HKR, Ndi\params\ConnectionType, type, 0,"enum" HKR, Ndi\params\ConnectionType\enum, 0, 0,"AutoSense" HKR, Ndi\params\ConnectionType\enum, 1, 0,"10Mbps" HKR, Ndi\params\ConnectionType\enum, 3, 0,"10Mbps Full_Duplex" [DM9102.confe.reg] HKR, Ndi\params\ConnectionType\enum, 2, 0,"100Mbps" HKR, Ndi\params\ConnectionType\enum, 4, 0,"100Mbps Full_Duplex" [DM9102.hpna.reg] HKR,Ndi\params\HomeRunPower,ParamDesc,,"HomeNet Power" HKR,Ndi\params\HomeRunPower,default,,"0" HKR,Ndi\params\HomeRunPower,type,,"enum" HKR,Ndi\params\HomeRunPower\enum,0,,"Low" HKR,Ndi\params\HomeRunPower\enum,1,,"High" HKR,Ndi\params\HomeRunSpeed,ParamDesc,,"HomeNet Speed" HKR,Ndi\params\HomeRunSpeed,default,,"1" HKR,Ndi\params\HomeRunSpeed,type,,"enum" HKR,Ndi\params\HomeRunSpeed\enum,0,,"Low" HKR,Ndi\params\HomeRunSpeed\enum,1,,"High" HKR,Ndi\params\TxHpnaRemoteCommand,ParamDesc,,"Tx HPNA Remote Command" HKR,Ndi\params\TxHpnaRemoteCommand,default,,"0" HKR,Ndi\params\TxHpnaRemoteCommand,type,,"enum" HKR,Ndi\params\TxHpnaRemoteCommand\enum,0,,"Disable" HKR,Ndi\params\TxHpnaRemoteCommand\enum,1,,"Enable" HKR,Ndi\params\RxHpnaRemoteCommand,ParamDesc,,"Rx HPNA Remote Command" HKR,Ndi\params\RxHpnaRemoteCommand,default,,"0" HKR,Ndi\params\RxHpnaRemoteCommand,type,,"enum" HKR,Ndi\params\RxHpnaRemoteCommand\enum,0,,"Disable" HKR,Ndi\params\RxHpnaRemoteCommand\enum,1,,"Enable" [DM9102.hpna.param.reg] HKR, Ndi\params\ConnectionType\enum, 5, 0,"1Mbps HomePNA" [DM9102.hpna.con.reg] HKR, ,ConnectionType, 0,"5" [DM9102.con.win.reg] HKR,NDI\params\ConnectionType,flag,1,20,00,00,00 ;============================================================================= ; ; DM9102 NT specific ; ;============================================================================= [DM9PCI.reg] HKR, Ndi, Service, 0, "DM9102" ; use ndis5 as the upper bound because NT supports it HKR, Ndi\Interfaces, DefUpper, 0, "ndis5" HKR, Ndi\Interfaces, DefLower, 0, "ethernet" HKR, Ndi\Interfaces, UpperRange, 0, "ndis5" HKR, Ndi\Interfaces, LowerRange, 0, "ethernet" HKR, , CoInstallers32, 0x00010000, "DM9Inst.dll, DM9InstProc" HKR, ,WIN98Timer, 0,"0" [DM9102.Service] DisplayName = %DM9PCI.Service.DispName% ServiceType = 1 ;%SERVICE_KERNEL_DRIVER% StartType = 3 ;%SERVICE_DEMAND_START% ErrorControl = 1 ;%SERVICE_ERROR_NORMAL% ServiceBinary = %12%\DM9PCI5.SYS LoadOrderGroup = NDIS [common.EventLog] AddReg = common.AddEventLog.reg [common.AddEventLog.reg] HKR, , EventMessageFile, 0x00020000, "%%SystemRoot%%\System32\netevent.dll" HKR, , TypesSupported, 0x00010001, 7 ;============================================================================= ; ; DM9102 Win9x specific ; ;============================================================================= [DM9102.win.reg] HKR, , DevLoader, 0, "*ndis" HKR, NDIS, LogDriverName, 0, "DM9PCI" HKR, NDIS, MajorNdisVersion, 1, 03 HKR, NDIS, MinorNdisVersion, 1, 0A HKR, NDIS\NDIS2, DriverName, , "DM9PCI$" HKR, NDIS\NDIS2, FileName, , "DM9PCI.dos" HKR, , EnumPropPages, 0, "netdi.dll,EnumPropPages" HKR,Ndi,NdiInstaller, , "DM9ndi.dll,DM9NdiProc" HKR, Ndi\Interfaces,DefUpper, 0, "ndis3,ndis2" HKR, Ndi\Interfaces,DefLower, 0, "ethernet" HKR, Ndi\Interfaces,UpperRange, 0, "ndis3,ndis2" HKR, Ndi\Interfaces,LowerRange, 0, "ethernet" HKR, ,WIN98Timer, 0, "1" HKR,NDI\params\StoreAndForward,flag,1,20,00,00,00 HKR,NDI\params\TransmitThreshold,flag,1,20,00,00,00 HKR,NDI\params\ACPIEnable,flag,1,20,00,00,00 ;============================================================================= ; ;Ndis driver selection ; ;============================================================================= HKR,Ndi\params\NdisVersion,ParamDesc,,"NDIS Version" HKR,Ndi\params\NdisVersion,default,,0 HKR,Ndi\params\NdisVersion,type,,enum HKR,Ndi\params\NdisVersion\enum,0,,"Auto Selection" HKR,NDI\params\NdisVersion,flag,1,20,00,00,00 [DM9102.hpna.win.reg] HKR,NDI\params\HomeRunPower,flag,1,20,00,00,00 HKR,NDI\params\HomeRunSpeed,flag,1,20,00,00,00 HKR,NDI\params\TxHpnaRemoteCommand,flag,1,20,00,00,00 HKR,NDI\params\RxHpnaRemoteCommand,flag,1,20,00,00,00 ;============================================================================= ; ; DestinationDirs ; ;============================================================================= [dm9pci.win.CopyFiles] DM9PCI5.SYS DM9PCI4.SYS DM9PCI3.SYS [dm9ndi.dll.CopyFiles] dm9ndi.dll [9102.ndis2.CopyFiles] DM9PCI.dos [DestinationDirs] DefaultDestDir = 12 DM9PCI.CopyFiles = 12 DM9PCI.DLL.CopyFiles = 11 dm9pci.win.CopyFiles = 11 dm9ndi.dll.CopyFiles = 11 9102.ndis2.CopyFiles = 10 ; LDID_WINBOOT [SourceDisksNames] 50="DAVICOM PCI Based Network Drivers Disk",, [SourceDisksFiles] DM9PCI5.sys = 50,,10000 DM9Inst.dll = 50,,10000 DM9PCI4.sys = 50,,10000 DM9PCI3.sys = 50,,10000 DM9NDI.dll = 50,,10000 DM9PCI.DOS = 50,,10000 [Strings] V_DSI = "DAVICOM Semiconductor, Inc." DM9102.DeviceDesc = "DAVICOM 9102/A PCI Fast Ethernet Adapter " DM9EHR.DeviceDesc = "DAVICOM 1/10/100 PCI Fast Ethernet Adapter " DM9ELR.DeviceDesc = "DAVICOM LongRun/10/100 PCI Fast Ethernet Adapter " DM9HR.DeviceDesc = "DAVICOM PCI HomeRun Adapter " DM9LR.DeviceDesc = "DAVICOM PCI LongRun Adapter " DM9GEN.DeviceDesc = "DAVICOM PCI Fast Ethernet Based Adapter " DM9FSW.DeviceDesc = "DAVICOM 9102A Full Based Switching Adapter " DM9HSW.DeviceDesc = "DAVICOM 9102A Half Based Switching Adapter " DM9009.DeviceDesc = "DAVICOM 10 Base-T PCI Ethernet Adapter " DM9PCI.Service.DispName = "DAVICOM PCI Based Network Adapter NT Driver"Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.