WA10A.TXT Driver File Contents (s717.zip)

*-TOTAL BYTES=199
*-Date:   1/30/97 
*-Version: RSS 5300
*-*****************************************
*- Rockwell PRO Utility V1.13    1/30/97  *
*-*****************************************
*************************************************
*WA10A  for 10 bit address decoding audio no modem and no CDROM
*To be used with Win 95 driver version 2.33 or higher
*Shared IRQ for WA, SB, and MPU401
*10/22/96
*Added SB  choices for SCT test
*Wide open choice IO from 220-280
*Remove modem and MPU401 choices to fit
*10/29/96
*Optimal SB IRQs = 5,7
*11/06/96
*Remove IRQ5,7 from Modem
*************************************************
4A
73
53
00
*=======================================
* Vendor ID:         RSS 5300
* Serial Number:     FFFFFFFF
* PNP Version:       1.0
* Rockwell Version:  0.0
* ANSI ID String:    'WaveArtist'
* (LSB Length: Ah  MSB Length: 0h)
*
* Checksum (LFSR) =  89h
*=======================================
FF
FF
FF
FF
89
0A
10
00
82
0A
00
57
61
76
65
41
72
74
69
73
74
*=======================================
* Logical Device ID = RSS 5000
* {WAVE ARTIST WAVE AUDIO} 
*
* I/O Range Check Enabled 
* Supported registers:  0x31
* -May not participate in boot process
*---------------------------------------
*
* DMA Channels =  5  6  7 
*
* I/O Port Descriptor 0 : 
*   10 bit address decode
*   Min Base Address=0250h
*   Max Base Address=03F0h
*   Alignment=10h Range=10h
*=======================================
15
4A
73
50
00
02
2A
E0
02
47
00
50
02
F0
03
10
10
*=======================================
* Logical Device ID = RSS 5001
* {SOUND BLASTER} 
*
* I/O Range Check Enabled 
* Supported registers:  0x31
* -May not participate in boot process
*---------------------------------------
*
*______Dependent Function 0 ______
* [Optimal Configuration]
*
* DMA Channels =  1 
*
* I/O Port Descriptor 0 : 
*   10 bit address decode
*   Min Base Address=0220h
*   Max Base Address=0220h
*   Alignment=01h Range=10h
*
* I/O Port Descriptor 1 : 
*   10 bit address decode
*   Min Base Address=0388h
*   Max Base Address=0388h
*   Alignment=01h Range=04h
*
* IRQs=  5  7 
*
*______Dependent Function 1 ______
* [Acceptable Configuration]
*
* DMA Channels =  1 
*
* I/O Port Descriptor 0 : 
*   10 bit address decode
*   Min Base Address=0240h
*   Max Base Address=0240h
*   Alignment=01h Range=10h
*
* I/O Port Descriptor 1 : 
*   10 bit address decode
*   Min Base Address=0388h
*   Max Base Address=0388h
*   Alignment=01h Range=04h
*
* IRQs=  5  7  10 
*
*______Dependent Function 2 ______
* [Sub-Optimal Configuration]
*
* DMA Channels =  0  1  3 
*
* I/O Port Descriptor 0 : 
*   10 bit address decode
*   Min Base Address=0220h
*   Max Base Address=0280h
*   Alignment=20h Range=10h
*
* I/O Port Descriptor 1 : 
*   10 bit address decode
*   Min Base Address=0388h
*   Max Base Address=03F0h
*   Alignment=04h Range=04h
*
* IRQs=  5  7  10  11 
*=======================================
15
4A
73
50
01
02
31
00
2A
02
08
47
00
20
02
20
02
01
10
47
00
88
03
88
03
01
04
22
A0
00
31
01
2A
02
08
47
00
40
02
40
02
01
10
47
00
88
03
88
03
01
04
22
A0
04
31
02
2A
0B
08
47
00
20
02
80
02
20
10
47
00
88
03
F0
03
04
04
22
A0
0C
38
*=======================================
* Logical Device ID = RSS 5002
* {MPU-401 MIDI} 
*
* I/O Range Check Enabled 
* Supported registers:  0x31
* -May not participate in boot process
*---------------------------------------
*
*______Dependent Function 0 ______
* [Optimal Configuration]
*
* I/O Port Descriptor 0 : 
*   10 bit address decode
*   Min Base Address=0330h
*   Max Base Address=0330h
*   Alignment=01h Range=04h
*
*______Dependent Function 1 ______
* [Acceptable Configuration]
*
* I/O Port Descriptor 0 : 
*   10 bit address decode
*   Min Base Address=0300h
*   Max Base Address=03F0h
*   Alignment=10h Range=04h
*=======================================
15
4A
73
50
02
02
31
00
47
00
30
03
30
03
01
04
31
01
47
00
00
03
F0
03
10
04
38
*=======================================
* Logical Device ID = RSS 5005
* {MODEM} 
*
* I/O Range Check is Not Enabled 
* -May not participate in boot process
*---------------------------------------
*
*______Dependent Function 0 ______
* [Optimal Configuration]
*
* IRQs= 
*=======================================
15
4A
73
50
05
00
30
22
00
00
38
*=======================================
* Logical Device ID = RSS 5003
* {CDROM} 
*
* I/O Range Check is Not Enabled 
* -May not participate in boot process
*---------------------------------------
*
*______Dependent Function 0 ______
* [Optimal Configuration]
*
* IRQs= 
*=======================================
15
4A
73
50
03
00
30
22
00
00
38
*=======================================
* Logical Device ID = RSS 5004
* {GAME PORT} 
*
* I/O Range Check Enabled 
* Supported registers:  0x31
* -May not participate in boot process
*---------------------------------------
*
*______Dependent Function 0 ______
* [Optimal Configuration]
*
* I/O Port Descriptor 0 : 
*   10 bit address decode
*   Min Base Address=0201h
*   Max Base Address=0201h
*   Alignment=01h Range=01h
*
*______Dependent Function 1 ______
* [Acceptable Configuration]
*
* I/O Port Descriptor 0 : 
*   10 bit address decode
*   Min Base Address=0208h
*   Max Base Address=020Fh
*   Alignment=01h Range=01h
*=======================================
15
4A
73
50
04
02
31
00
47
00
01
02
01
02
01
01
31
01
47
00
08
02
0F
02
01
01
38
79
4F *  CheckSum: 
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web1, load: 1.11