LANSVR23.TXT Driver File Contents (Pcmcia.zip)

LAN Server 2.0 or 3.0

Introduction:
-------------
This document describes the procedure to install NDIS driver
on DOS LAN Requester and  OS/2 LAN server 2.0 (or 3.0) for
PCMCIA/CT II Ethernet adapter.

Before you start with the installation process, make sure that
the Card Manager software has been successfully installed. For
information on installing the Card Manager software, please refer
to the appropriate readme file, your Ethernet Adapter manual, or
your computer manufacturer.

Location of Driver:  \NDIS\DOS\PCM200.DOS  (for DOS LAN Services)
		     \NDIS\OS2\PCM200.OS2  (for OS/2 LAN Server)


Installing driver procedure on DOS LAN Requester :
--------------------------------------------------

   1. Insert the IBM LAN Support Program (LSP) Version 1.30 (or 1.31)
      Diskette into your floppy drive A: .

   2. Type A:\dxmaid  and press <Enter> .

   3. The screen will display the IBM logo. Press <Enter> twice until
      the "Environment Information" appears on screen.

   4. Responds to the screen prompts, specifying the following values
      for each field,use the <Space Bar> to toggle between choices:

	     Configuration for this computer?	       Yes
	     Use existing configuration information?   Yes
	     Do you have adapter option diskettes?     Yes
	     Are you configuring for two adapters?     No
	     Do you need 802.2 interface support?      Yes

	     Source for LSP			      A:\
	     Target for new configuration	      C:\lsp

      Make  sure  that	the values given above are correct, then press
      <Enter> to store your choices.

   5. Insert the PCMCIA/CT II driver diskette in floppy A,and specify
      your pathname A:\NDIS\DOS,then press ENTER.

   6. Follow screen instructions to complete the process. Simply
      pressing <Enter> for each screen display will select the default
      options. Press <Enter> until you reach the display prompting you
      to insert the LSP diskette.

   7. Insert the LSP diskette as prompted. Press <Enter> to acknowledge
      completion of the action.

   8.  A screen showing the current configuration detected will be
       displayed. It should show the PCMCIA/CT II Adapter and the
       protocols already selected (i.e., "IBM IEEE 802.2" and
       "IBM OS/2 NETBIOS").

   9.  Press <F4>. to save the new configuration. This completes the LSP
       installation.

   10. Save the configuration and reboot your computer.

   11. Insert the DOS LAN Requester Install Diskette 1 into your floppy
       drive.

   12. Type A:\INSTALL	  <Enter>

   13. The IBM logo will again appear on the screen. Press <Enter> to
       move on to the next screen.

   14. Follow screen instructions, pressing <Enter> to move from
       screen-to-screen until you are prompted to indicate the pathname
       of the DOS LAN Requester directory (C:\DOSLAN ).

   15. Specify the pathname (C:\DOSLAN is the default) for the DOS LAN
       Requester directory. Then press <Enter> to continue.

   16. The program will ask you for the services that you require.

   17. Highlight the appropriate option. Select either "Send messages"
       or "Send, View, Edit, and Log message" option. (Normally, second
       option "Send, View, Edit and Log message" is selected).

   18. Specify the PC's ID and domain ID.

   19. Follow screen prompts to complete the installation.


Installing driver procedure on OS/2 LAN Server 2.3 :
--------------------------------------------------
   Before you start with the installation process, make sure that
   OS/2 LAN Server is properly installed. Similarly, your adapter
   should also be properly installed in your server.

   1. Copy PCM200.OS2 and PCM200.NIF files from your Driver diskette
      (\NDIS\OS2) to C:\IBMCOM\MACS.

   2. Click the OS/2 LAN Service icon.

   3. Select "Installation and configuration". The IBM logo should
      appear onscreen.

   4. Click <OK>.

   5. Select <Advance> and press <Enter>.

   6. Select "Install or Configuration this Workstation."

   7. Select server type, adding a server or domain controller.  The
      "install or remove" selections should appear.

   8. Select "Configure a component."

   10. Click the "Configure" button.

   11. Select "Configure workstation."

   12. Select "PCMCIA/CT II Adapter" when prompted to identify you
       Network Adapter. Then click the <Add> button.

   13. Select IBM NETBIOS from the list and click the <Add> button.

   14. Select <OK> to confirm all selections.

   15. Follow screen instructions to complete the process, selecting
       <OK> to accept default selections.

   16. Continue pressing <OK> until your screen prompts you to backup
       old CONFIG.SYS and AUTOEXEC.BAT and create a new CONFIG.SYS
       and AUTOEXEC.BAT. Also select <OK> to confirm this.

   17. Installation is complete now. Reset your PC by turning it off
       and on.

Note :
-----
   DOS version must be bellow DOS 5.0 when installing DOS LAN requester
   into your DOS system.


Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: ftp, load: 1.00