LANMOS2.TXT Driver File Contents (89c940.zip)

   ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
   ³                  Installation for OS/2 LAN Manager                     ³
   ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

   A. Please follow the procedure below to setup LAN Manager Sever OS/2
      Workstations:

      1. Change directory to C:\LANMAN, and type "SETUP"
      2. Select [Configuration]->[Network Driver...]
      3. Remove old adapter if there exist, and [Add New Driver]
      4. When installation program asks for a network drivers,
         select "Other Driver".
      5. Insert 940PCI Drivers diskette into drive A:
      6. Follow the direction to finish the setup procedure.

   B. Trouble Shooting

      1. Message: "!! No W89C940 card detected"
           Solution: Make sure that your 940 card is plugged steadily.

      2. Message: "!! No free W89C940 card"
           Solution: One driver for one card. Make sure that there is less
           drivers loaded than card plugged. If option keyword SelectedID is
           assigned, make sure that all node ID's assigned is correct or let
           drivers without SelectedID be loaded after those with SelectedID.

      3. Message: "!! Cannot open PROTMAN$"
           Solution: Make sure that PROTMAN.OS2 is loaded before W940ND.OS2,
           and it is initialized successfully. If the syntax of PROTOCOL.INI
           is incorrect, PROTMAN$ cannot be loaded.

      4. Message: "!! Bad Parameter in PROTOCOL.INI"
           Solution: The parameter is invalid. For example, the correct
           SelectedID format need two single quotation signs ('). If you fail
           to do it, this message will be shown.

      5. Message: "!! Unknown Keyword in PROTOCOL.INI"
           Solution: W940ND only accepts two keywords: DRIVERNAME and
           SELECTED. Other keywords are unknown. Notice that, PCI bus need
           not assign IOBASE and INTERRUPT.

      6. Message: "!! Specified SELECTEDID is absent or bound"
           Solution: You specified a node ID at keyword SelectedID, and this
           ID is bound by another drivers or can not be found. Make sure
           that the ID is correct.

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web1, load: 0.78