LANMDOS.TXT Driver File Contents (

   ³                   Installation for DOS LAN Manager                     ³

   A. Please follow the procedure below to setup LAN Manager MS-DOS

      1. When installation program asks for a network drivers,
         select "Other Driver".
      2. Insert 940PCI Drivers diskette into driver A:
      3. Follow the direction to finish the setup procedure.

   B. Trouble Shooting

      1. Message: "!! No W89C940 card detected"
         Solution: Make sure that your W89C940 card is plugged steadily.

      2. Message: "!! No free W89C940 card"
         Solution: One driver for one card. Make sure that there is less
                   drivers loaded than card plugged. If option keyword
                   SelectedID is assigned, make sure that all node ID's
                   assigned is correct or let drivers without SelectedID be
                   loaded after those with SelectedID.

      3. Message: "!! Cannot open PROTMAN$"
         Solution: Make sure that PROTMAN.DOS is loaded before 940-ND.DOS,
                   and it is initialized successfully. If the syntax of
                   PROTOCOL.INI is incorrect, PROTMAN$ cannot be loaded.

      4. Message: "!! Bad Parameter in PROTOCOL.INI"
         Solution: The parameter is invalid. For example, the correct
                   SelectedID format need two single quotation signs (').
                   If you fail to do it, this message will be shown.

      5. Message: "!! Unknown Keyword in PROTOCOL.INI"
         Solution: 940-ND only accepts two keywords: DRIVERNAME and SELECTED.
                   Other keywords are unknown. Notice that, PCI bus need not
                   assign IOBASE and INTERRUPT.

      6. Message: "!! Specified NODEID is absent or bound"
         Solution: You specified a NODE ID at keyword SelectedID, and this
                   ID is bound by another drivers or can not be found. Make
                   sure that the ID is correct.

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web1, load: 0.62