ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
º º
º Compex LinkPort\TX16 10/100 PCMCIA Fast Ethernet º
º CopyRight(c) 1998 Compex Inc. º
º All rights reserved º
º º
ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
* Microsoft Windows for Workgroup 3.11 Installation *
* for LinkPort/TX16 10/100 PCMCIA Fast Ethernet Card *
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
NOTICE:
ÄÄÄÄÄÄ
The instructions below discribe enhanced mode (NDIS3) driver
installation only.
For Real mode and DOS ODI driver installation, use A:\NDIS2 directory.
See A:\NDIS2\WFW16B.TXT for instructions.
Installation Procedures:
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
(1) Run INSTALL from the Compex driver disk provided.
The enabler software will be copied to C:\TX16DIAG
Select QUIT to exit the installation of drivers.
Network support for Windows must be install from Windows itself.
(2) Reboot the PC with the PCMCIA Ethernet Card in the PCMCIA slot
The enabler software will load and configure the adapter.
(3) Start Microsoft Windows for Workgroup 3.11
(4) Select "Network Setup" from Program Group "Network"
(5) Select "Drivers..."
(6) Select "Add Adapter..."
(7) Select "Unlisted or Updated Network Adapter"
(8) Insert Installation diskette into drive A: and enter the path
name A:\WFW311
(9) Setup the correct interrupt (IRQ) number and base I/O port address,
this should match to the assignment to the card as the enabler.
(10) Setup the correct networking support for Windows and file/printer
sharing options
(11) Restart the PC
(12) Edit the AUTOEXEC.BAT file to add the command line below immediately
before the line "NET START"
.e.g,
C:\TX16DIAG\LANEN /IOP:320 /IRQ:11
C:\Windows\NET START
Change IOP and IRQ ans needed, if the settings conflict.
Any changes made to this line you must also change in Windows
network setup.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.