1. Compex.zip Driver
2. PACKET.TXT File Contents

PACKET.TXT Driver File Contents (Compex.zip)

         ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
         º                                                     º
         º   Compex LinkPort\TX16 10/100 PCMCIA Fast Ethernet  º
         º           CopyRight(c) 1998 Compex Inc.             º
         º                All rights reserved                  º
         º                                                     º
         ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ

                  Packet Driver Installation Overview
                  ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ


 Contents
 ÄÄÄÄÄÄÄÄ
        Introduction
        User's Guide
        Support Options
        Copyrights, Trademarks, and Disclaimers

 Introduction
 ÄÄÄÄÄÄÄÄÄÄÄÄ
        Packet drivers are general drivers used by many operating systems,
        especially TCP/IP software packages.  If the network system that is
        installed specifically mentions support for packet drivers, then
        it is likely that it will be able to the provided packet driver
        without problems.

        The most important thing to remember when installing packet drivers
        is the software interrupt vector.  The default interrupt vector for
        the packet drivers is 0x62 hexadecimal.  Most network operating
        system supporting packet drivers will try to automatically search for
        packet drivers already loaded in the computer's memory.  However,
        some packages will require a provided interrupt vector for the packet
        driver.  Furthermore, some packages can only work with certain
        interrupt vectors. which require a software interrupt vector parameter
        when loading.  Please see the section at the end of this document for
        description on packet driver parameters.

        Since the LinkPort/TX16 10/100 Fast Ethernet are software configurable,
        the packet driver will automatically detect the hardware parameters.
        If the packet driver can properly read the adapter's MAC address
        during loading, then the hardware is normally working properly.

 User's Guide
 ÄÄÄÄÄÄÄÄÄÄÄÄ
         Command syntax:
         ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ

         CLPPKT16.COM <packet_int_no> <int> <i/o address>

       If loaded from CONFIG.SYS file,

         DEVICE=CLPPKT16.SYS <packet_int_no> <int> <i/o address>

        e.g. if the adapter is configured by the enabler using IO base
             address is 320H and Interrupt line number chosed is 11
             and packet)int_no is 60H,  then enter,

                  CLPPKT16 0x60 11 0x320


        Packet Driver Parameters:
        ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ

        <packet_int_no> is the software interrupt vector number used by the
                       packet driver program.
                        range:  0x60 to 0x80 in steps of 0x01

        <int> is the hardware interrupt used by the card. this should match
              the PCMCIA drivers interrupt selection for the card.
              valid value: 3,4,5,7,9,10,11, or 15.

        <i/o address> is the hardware i/o address used by the card.
                      This should match the PCMCIA drivers i/o address
                      selection for the card.
                      valid range: 0x200 to 0x3E0 in steps of 0x20


  Support Options
  ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
        If you still cannot get the Card working properly, our
        technical experts are always ready to help.  Please be at your
        computer, have your PCMCIA Card, Drivers Disk, and the following
        information available:

        * Version number of LANEN.EXE or any drivers you are running
        * The extact text of any error message displayed on your screen
        * The type of computer
        * The type of network

 Copyrights, Trademarks, and Disclaimers
 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
 All references to MS, Windows, Win95, Windows 95, Windows NT, WinNT are
 rights reserved by Microsoft Corporation

 All references to Nvl., ODI, Netware, NW, IPX, IPXODI, and LSL are rights
 reserved by Novell Corporation

 Further rights reserved to their respective corporations