ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
º º
º Compex LinkPort\TX16 10/100 PCMCIA Fast Ethernet º
º CopyRight(c) 1998 Compex Inc. º
º All rights reserved º
º º
ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
SUN PCNFS 5.0 Installation
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
Contents
ÄÄÄÄÄÄÄÄ
Introduction
Requirements
Minimum Skill Level
Compatibility List
Getting Started
Introduction
ÄÄÄÄÄÄÄÄÄÄÄÄ
This installation assumes that the PCMCIA drivers are working properly.
Please consult \PCMCIA\README.TXT for help with PCMCIA Drivers.
Getting Started will describe the installation for Lan Manager.
Requirements
ÄÄÄÄÄÄÄÄÄÄÄÄ
A PCMCIA compatible Laptop
A PCMCIA chipset that is PCIC compatible (Intel, Cirrus, Vadem, and
VLSI) or a Card Service has been installed
SUN PCNFS 5.0 or newer
A PCMCIA Fast Ethernet Card
A knowledge of basic DOS commands and editing text files
Minimum Skill Level
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
A knowledge of basic DOS commands
A knowledge of editing text files
A knowledge of DOS basic file structure (CONFIG.SYS and AUTOEXEC.BAT)
A knowledge of the network driver configuration being used
Please see Support Options if you are not comfortable will this
skill level
Compatibility List
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
Removal of any present PCMCIA drivers
For a laptop compatibility list please consult your local
supplier
Getting Started
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
Please read all methods below and choose the one that matches your
configuration.
The example shows the LAN adapter is configured to I/O Base address
of 320H and Interrupt number of 11
Make changes where necessary if your LAN card is configured with
a different configuration.
Method 1 -- NDIS Driver
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
When using PC-NFS concurrently with LAN Manager, select the "NDIS"
option from the PC-NFS installation screen. This option works with
the NDIS driver included in the provided driver diskette. Copy the
files listed below into the \NFS directory of your hard disk. These
files will be used in the installation.
File Description
------------ ----------------------------------------------
NFS-NDIS.SYS PC-NFS driver program
CLPTX16.DOS NDIS driver program
PROTMAN.SYS MS PROTOCOL MANAGER
NETBIND.EXE MS LAN MANAGER Netbind
The following lists the contents of the configuration files:
CONFIG.SYS AUTOEXEC.BAT
ÄÄÄÄÄÄÄÄÄÄ ÄÄÄÄÄÄÄÄÄÄÄÄ
SWITCHES=/F SET TZ=EST5EDT
DEVICE=C:\HIMEM.SYS C:\DOS\SMARTDRV.EXE
DEVICE=C:\EMM386.EXE NOEMS RAM @PROMPT $p$g
DOS=HIGH,UMB PATH=C:\NFS;C:\WINDOWS;C:\DOS;
BUFFERS=10,0 C:\LANMAN\NETBIND
FILES=40 SET TEMP=C:\DOS
STACKS=0,0 SET NFSDRIVE=C
LASTDRIVE=G SET NFSPATH=C:\NFS
SHELL=C:\DOS\COMMAND.COM C:\DOS /P SET TN_DIR=C:\NFS\TELNET
LANEN /IOP:320 /IRQ:11
DEVICE=C:\NFS\PCNFS.SYS /l40 C:\NFS\PRT *
DEVICE=C:\NFS\SOCKDRV.SYS C:\NFS\NET INIT
DEVICE=C:\LANMAN\PROTMAN.SYS /I:C:\LANMAN
DEVICE=C:\LANMAN\NFS-NDIS.SYS
DEVICE=C:\LANMAN\CLPTX16.DOS
PROTOCOL.INI
ÄÄÄÄÄÄÄÄÄÄÄÄ
[PROTOCOL MANAGER]
DriverName = PROTMAN$
[CLPTX16]
DRIVERNAME = CLPTX16$
INTERRUPT = 11
IOADDRESS = 0x320
[NFS-NDIS]
DriverName = NFSLINK$
Bindings = CLPTX16
To use the NDIS driver, the user needs to obtain a PC-NFS 5.0
QUIKNDIS diskette which will install all but the Ethernet driver.
Method 2 -- ODI Driver
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
When using PC-NFS concurrently with NetWare 3.1x/4.0, select the
"ODI" option from the PC-NFS installation screen. This option works
with the ODI driver included in the provided driver diskette. Copy
the files listed below into the \NFS directory of your hard disk.
These files will be used in the installation.
File Description
------------ -----------------------------------------
NFSODI.SYS PC-NFS driver program
CLPTX16.COM ODI driver program
LSL.COM NetWare Link Support Layer
IPXODI.COM NetWare IPX/SPX Protocol
NETX.EXE NetWare Workstation Shell
The following lists the contents of the configuration files:
CONFIG.SYS AUTOEXEC.BAT
ÄÄÄÄÄÄÄÄÄÄ ÄÄÄÄÄÄÄÄÄÄÄÄ
SWITCHES=/F SET TZ=EST5EDT
DEVICE=C:\HIMEM.SYS C:\DOS\SMARTDRV.EXE
DEVICE=C:\EMM386.EXE NOEMS RAM @PROMPT $p$g
DOS=HIGH,UMB PATH=C:\NFS;C:\WINDOWS;C:\DOS;
BUFFERS=10,0 SET TEMP=C:\DOS
FILES=40 SET NFSDRIVE=C
STACKS=0,0 SET NFSPATH=C:\NFS
LASTDRIVE=G SET TN_DIR=C:\NFS\TELNET
SHELL=C:\DOS\COMMAND.COM C:\DOS /P LSL
LANEN /IOP:320 /IRQ:11
DEVICE=C:\NFS\PCNFS.SYS /l40 CLPTX16.COM
DEVICE=C:\NFS\SOCKDRV.SYS C:\NFS\PRT *
DEVICE=C:\NFS\NFSODI.SYS /b2 C:\NFS\NET INIT
IPXODI
NETX
NET.CFG
ÄÄÄÄÄÄÄ
Link driver CLPTX16
INT 11
PORT 320
Frame Ethernet_802.3
Frame Ethernet_II
Protocol IPX 0 Ethernet_802.3
If your Novell FILE SERVER is configured to use the Ethernet_802.3
frame type, add a /b2 switch to the line DEVICE=C:\NFS\NFSODI.SYS
in your CONFIG.SYS file and add an entry in your NET.CFG file
defining the two frames types.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.