ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
º º
º Compex LinkPort\TX16 10/100 PCMCIA Fast Ethernet º
º CopyRight(c) 1998 Compex Inc. º
º All rights reserved º
º º
ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
* How to install CLPTX16.DOS on MS LAN MANAGER *
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
Method 1: Using MS LAN MANAGER's SETUP.EXE program(recommended)
1) MS LAN Manager provides a SETUP.EXE program on their Setup disk.
Execute this SETUP program to specify the proper driver for the card.
If you have already installed LAN Manager, run the SETUP program, and
go to "Configuration => Network Drivers => Add New Config => Other
Drivers" button. Insert diskette into drive 'A' and set the new path as
A:\NDIS2. The SETUP program will copy the necessary NDIS driver programs
from the \MSLANMAN.DOS directory.
-If you are installing LAN Manager for the first time, do the following:
Upon completion of retrieval of the last workstation's disk contents,
you will be asked if you want to import additional network drivers.
Answer "YES".
-If you have already installed LAN Manager in your harddisk, do the following:
Select the "Configuration => Network Drivers => Add New Config => Other
Driver" option.
2) Insert the driver diskette in drive 'A' and input path 'A:\NDIS2'.
Following the instructions on the screen, the SETUP program will copy the
necessary NDIS driver programs from the \MSLANMAN.DOS directory to your
hardisk(into the LAN Manager directory).
3) After completion of the SETUP, your CONFIG.SYS file will be modified and
contain statements referring to the NDIS driver programs. In addition,
AUTOEXEC.BAT & PROTOCOL.INI files are also be modified.
Method 2: Using INSTALL.EXE program in the driver diskette
1. Running INSTALL.EXE and use 'Hardware Setting' under 'Custom Install'
item to meet your hardware requirement
2. Select "Lan Manager => Install Driver" and installation program will
copy corresponding files to directry "<PATH>\DRIVERS\ETHERNET\CLPTX16\
PROTOCOL.INI"
3. Add a new section "[CLPTX16_NIF]" and append the text in
"<PATH>\DRIVERS\ETHERNET\CLPTX16\PROTOCOL.INI" file to PROTOCOL.INI file
in directory "<PATH>". And modify the value after keyword "BINDINGS" in
section "???_XIF" to "CLPTX16_NIF".
[???_XIF]
...
BINDINGS = "CLPTX16_NIF"
...
[CLPTX16_NIF]
DRIVERNAME= CLPTX16$
IOADDRESS = 0x300
INTERRUPT = 11
Reboot your computer and NDIS will bind to the driver programs.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.