ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
º º
º Compex LinkPort\TX16 10/100 PCMCIA Fast Ethernet º
º CopyRight(c) 1998 Compex Inc. º
º All rights reserved º
º º
ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
³ GENERAL INFORMATION ³
ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ
The 16-bit NDIS 2.01 driver for IBM LAN Server OS/2 servers/clients
is located in the \IBMLS directory.
\IBMLS\OS2\CLPTX16.OS2 - 16-bit NDIS 2.01 for OS/2
IBM LAN Server also requires a unique NIF file.
\IBMLS\OS2\CLPTX16.NIF - NIF file for IBM OS/2 Server and Requester
ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
³ INSTALLATION GUIDE ³
ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ
To install the Compex LinkPort/TX16 PCMCIA adapter driver, follow
the instructions below:
(1) Enable PCMCIA Services under OS/2 Warp Version 3
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
Before the NDIS driver being installed, please follow the following
steps to make sure the PCMCIA Services has been enabled.
1.In the OS/2 Desktop group, double-click on the <OS/2 System> icon.
2.double-click on the <System Setup> icon.
3.double-click on the <Selective Install> icon.
If the PCMCIA Services was enabled already, you can see the PC
vendor and model name listed under the <PCMCIA Support> Icon.
Otherwise, you can see an "No Support Installed" string listed under
the <PCMCIA Support> Icon. For not enabled case, please follow the
steps list below to install the PCMCIA Services.
4.Select the <PCMCIA Support> button.
5.Select PCMCIA system.
If the PC model is not on the list, you may select a PC that use
the same PCMCIA controller with your PC.
For example :
Select IBM ThinkPad 750 for Intel 82365 compatible chips.
If the selected model is incorrect, the PCMCIA function will work
improperly. You have to unstall the services and to re-install the
correct one.
6.Click <OK>.
7.Click <Install>.
8.Select the source drive and directory
For Example D:\OS2IMAGE
9.Click <Install>.
10.Click <OK>.
(2) Install NDIS2 driver for IBM LAN Server 4.0
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
1.In the OS/2 Desktop group, double-click on the <MPTS> icon.
2.Click on the <Configure> button.
3.Select the <LAN adapters and protocols> option.
4.Click on the <Configure> button.
5.Select the "Other adapters ..." option.
6.Insert the driver diskette and type the driver path:
A:\IBMLS\OS2
Click on the <OK> button.
7.Select <PCMCIA Ethernet Adapter>, and then click on the <Add> button.
8.Select <IBM OS/2 NETBIOS>, and then click on the <Add> button.
9.Click <OK>.
10.Click <Close>.
11.Click <Exit>.
12.Shutdown and Restart your system.
PROTOCOL.INI Parameter Definitions
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
Below is an explanation of each PROTOCOL.INI parameter for the Compex
LinkPort/TX16 PCMCIA Ethernet Adapter.
The parameter that must be present is the "DRIVERNAME".
DRIVERNAME = CLPTX16$
Note: If you have two LAN cards installed, the second card will use,
Drivername = CLPTX16$.
Other parameters:
IOADDRESS = xxx
range: 200H - 3E0H in steps of 20H
INTERRUPT = xx
valid value: 3,4,5,7,9,10,11,12,15
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.