DIAG.TXT Driver File Contents (Compex.zip)

         º                                                     º
         º  Compex LinkPort\TX16 10/100 PCMCIA Fast Ethernet   º
         º           CopyRight(c) 1998 Compex Inc.             º
         º                All rights reserved                  º
         º                                                     º

Running the Diagnostic program

Before you run LANDIAG.EXE diagnostic program, first run the enabler,
LANEN.EXE to configure Compex LinkPort\TX16 10/100 Fast Ethernet adapter.
See A:\ENABLER\ENABLER.TXT for instruction.

A sample batch file, DIAG.BAT, in the disk help to execute the diagnostic
program in the correct sequence.
The batch file will configure the adapter with default Interrupt (IRQ) and
IO address. If there is a conflict add the parameters /IRQ:n  and /IOP:xxx
after the command LANEN.EXE to assign a new IRQ nad IO address for the card
respectively and reboot the notebook.
E.g. to manually run the diagnostic program, enter, 
     A:> Cd A:\Diagnost
     A:\Diagnost> Lanen.exe /iop:320 /irq:11
     A:\DIagnost> Diag.exe			

For more details on executing the enabler refer to A:\ENABLER\ENABLET.TXT file.
LANDIAG automatically test the adapter and display the test results.
The screen messages are self explanatory. If any of the test is not successful
a FAILED status will flagged at the end of the test message.

The diagnostic program can execute only one iteration at a time.
Except the 'ESC' key, press any key each time will cause the program to do
another iteration test.
To quit LANDIAG, press `ESC' key.

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web3, load: 0.51