[Korean]
README.TXT MATROX GRAPHICS INC. 2000.09.07
Windows NT 4.0¿ë Matrox PowerDesk
ÁÖ: ÀÌ ÆÄÀϵéÀº Çѱ¹¾î·Î ¹ø¿ªµÇÁö ¾ÊÀº ÃÖ±ÙÀÇ Á¤º¸¸¦
Æ÷ÇÔÇÒ ¼ö ÀÖ½À´Ï´Ù. ºÒÆíÀ» ³¢Ãĵå·Á¼ Á˼ÛÇÕ´Ï´Ù.
¸ñÂ÷
====
- ¼³Ä¡
- Á¦Ç°¿¡ ´ëÇÑ ¼³¸í
- Matrox PowerDesk »ç¿ë¹ý
- Çϵå¿þ¾î-°¡¼Ó 3D
- ÁÖ¼®, ¹®Á¦Á¡ ¹× Á¦ÇÑ »çÇ×
- Matrox TV Ãâ·Â
- [English...] DualHead notes [...English]
¼³Ä¡
====
[English...]
This section describes how to install the Matrox display driver for
Windows NT 4.0 (SP 5).
Note: You may need administrator rights to install certain
software. For more information, see Windows documentation.
(1) After the display driver has been copied to your hard disk:
Right-click your Windows desktop background, then click
"Properties" > "Settings" > "Display Type" > "Change" >
"Have Disk" > "Browse".
(2) Select the folder where the Matrox display driver for your
operating system (Windows NT 4.0) is located, then
click "Open" > "OK".
(3) Select the appropriate model/language name, then click
"OK" > "Yes" > "OK" > "Close" > "Close" > "Yes".
[...English]
Á¦Ç°¿¡ ´ëÇÑ ¼³¸í
================
ÀÌ°ÍÀº Matrox À©µµ¿ìNT µð½ºÇ÷¹ÀÌ Á¦¾î±â.
ÀÌ°ÍÀº x86 CPU¿ë, Microsoft Windows NT ¹öÀü4.0 (Build 1381 ¶Ç´Â º¸´Ù ÃÖ±Ù
¹öÀü)
À» Áö¿øÇÕ´Ï´Ù.
ÀÌ Á¦Ç°ÀÌ Æ÷ÇÔÇÏ´Â °Í:
- µð½ºÇ÷¹ÀÌ Á¦¾î±â
- Windows NT 4.0 ¿ë Matrox PowerDesk
[English...]
The display driver supports up to 16 graphics chips at a time. If one of
those chips has DualHead support, the display driver supports up to 17
displays at a time. (Note: A graphics card may have more than one graphics
chip. Also, the display driver must support each model of graphics card
installed in your computer.)
[...English]
Matrox PowerDesk »ç¿ë¹ý
=======================
ÇØ»óµµ º¯°æ, ¸ð´ÏÅÍ ¼±ÅÃ, ±×¸®°í Matrox PowerDesk »ç¿ë¹ýÀº
"online.doc" ÆÄÀÏ¿¡ ¼³¸íµÇ¾î ÀÖ½À´Ï´Ù. ´ç½ÅÀº ÀÌ ÆÄÀÏÀ» ¿öµåÆе带 ÅëÇØ
º¼ ¼ö ÀÖ½À´Ï´Ù.
Çϵå¿þ¾î-°¡¼ÓµÈ 3D
==================
3D Çϵå¿þ¾î °¡¼ÓÀÇ °æ¿ì Matrox Windows NT 4.0 µð½ºÇ÷¹ÀÌ µå¶óÀ̹ö´Â MCD
( Mini Client Driver)¿Í ICD (Installable Client Driver) µÎ Á¾·ùÀÇ µå¶óÀ̹ö¸¦
ÀÌ¿ëÇÏ´Â
OpenGL ÀÎÅÍÆäÀ̽º¸¦ Áö¿øÇÕ´Ï´Ù. Matrox Millennium, Millennium II, Mystique,
Mystique 220,
G100 ±â¹Ý ±×·¡ÇÈ Ä«µå´Â MCD Áö¿øÀ» ÇÕ´Ï´Ù. Matrox
G200 ¹× G400 ±â¹Ý ÀÌ»óÀÇ ±×·¡ÇÈ Ä«µå´Â ICD Áö¿øÀ» ÇÕ´Ï´Ù.
ICD´Â MCDº¸´Ù ÃÖÀûÈ °¡´É¼ºÀÌ ³ô½À´Ï´Ù.
3D Çϵå¿þ¾î °¡¼Ó¿¡´Â ´ÙÀ½ Á¦ÇÑÀÌ ÀÖ½À´Ï´Ù.
- ÇöÀç´Â ´ÙÁß-Ä«µå°¡ »ç¿ëµÇ¸é °¡¼ÓÀº Çã¿ëµÇÁö
¾Ê½À´Ï´Ù.
- MCD´Â 8bpp (256 »ö»ó) ¹× 24bpp (16777216 »ö»ó) ¸ðµå´Â
Áö¿øÇÏÁö ¾Ê½À´Ï´Ù. 16bpp (64K »ö»ó),
±×¸®°í 32bpp (Æ®·ç Ä®·¯) ¸ðµåµéÀÌ Çϵå¿þ¾î-°¡¼ÓÀ¸·Î ÇÒ
¼ö ÀÖ´Â °ÍµéÀÔ´Ï´Ù.
- »ç¿ë °¡´É Çػ󵵿¡ ´ëÇÑ ÇѵµµéÀÌ ¿¹»óµË´Ï´Ù. ¸ðµç
3D ¸ðµå´Â ´õºí ¹öÆÛ ±×¸®°í/¶Ç´Â Z ¹öÆÛ¸¦ »ç¿ëÇϱâ À§ÇÑ
Ãß°¡ ¸Þ¸ð¸®¸¦ ÇÊ¿ä·ÎÇÕ´Ï´Ù, ±×¸®°í ÀÌ·± ¸Þ¸ð¸®´Â ´õ ÀÌ»ó
µð½ºÇ÷¹ÀÌ¿¡ »ç¿ë °¡´ÉÇÏÁö ¾Ê½À´Ï´Ù.
ÁÖ¼®, ¹®Á¦Á¡, ±×¸®°í Á¦Çѵé
===========================
[English...]
- Using 1280 x 800 display resolution with P1690 monitors
To use 1280 x 800 display resolution with P1690 monitors, make
sure "P1690" is selected with the Matrox "Monitor" property
sheet. To access this property sheet, click the "Matrox QuickDesk"
icon on your Windows taskbar, then click "Matrox Display
Properties" > "Monitor". For more information on monitor
selection, see the Matrox PowerDesk guide included with your
display driver.
[...English]
- Çϳª ÀÌ»óÀÇ PCI ¹ö½º°¡ ÀåÂøµÈ ÄÄÇ»ÅÍ
º¸µå°¡ bus 0°¡ ¾Æ´Ï°í PCI bus¿¡ ÀåÄ¡ µÇ¾úÀ» °æ¿ì, Àüü ȸé
¸í·É ÇÁ·ÒÇÁÆ®·Î ¹Ù²Ù°Å³ª, ¶Ç´Â ¸ðµåÀÇ ¾î¶² º¯°æÀ»Çϸé,
ÆĶõ»ö ȸéÀ¸·Î Ãæµ¹(Å©·¡½Ã)ÀÇ °á°ú°¡ ³ªÅ¸³¯¼ö ÀÖ½À´Ï´Ù.
¹®Á¦Á¡µéÀº Á¶»ç Áß¿¡ ÀÖ½À´Ï´Ù. Ä«µå¸¦ ´Ù¸¥ PCI ½½·µÀ¸·Î
À̵¿ÇÏ´Â °Íµµ °¡´ÉÇÑ ÇϳªÀÇ ¹æ¹ýÀÔ´Ï´Ù.
PCI ºê¸®Áö ¹Ø¿¡ ÀåÄ¡µÈ ¾î´ðÅÍµé »çÀÌ¿¡ Ãæµ¹ÀÌ ÀÖ´Ù°í º¸°íµÇ´Â
Windows NT ½Ã½ºÅÛµéÀÌ ÀÖ½À´Ï´Ù. ÀÌ °æ¿ì¿¡´Â, Matrox Millennium
¹Ì´Ï Æ÷Æ® Á¦¾î±â´Â ÀÚü Ä«µå·Î´Â Á¢¼ÓÇÒ ¼ö ¾ø½À´Ï´Ù. ¸¸ÀÏ
´ç½ÅÀÇ ½Ã½ºÅÛÀÌ Millennium Ä«µå¸¦ ãÀ» ¼ö ¾ø´Ù°í ³ªÅ¸³ª¸é,
±×°ÍÀ» ´Ù¸¥ PCI ½½·µÀ¸·Î À̵¿ÇØ º¸½Ê½Ã¿À.
Microsoft Service Pack 3 (¶Ç´Â º¸´Ù ÃÖ±Ù ¹öÀü) for Windows NT 4.0
À» ¼³Ä¡Çϸé ÀÌ·± ¹®Á¦ÀÇ ´ëºÎºÐÀÌ ÇØ°áµË´Ï´Ù.
- °¡»ó µ¥½ºÅ©Å¾°ú DirectDraw
ÀϺΠDirectDraw ÇÁ·Î±×·¥¿¡¼´Â °¡»ó µ¥½ºÅ©Å¾ÀÌ ÀûÀýÈ÷ ÀÛµ¿ÇÏÁö
¾Ê½À´Ï´Ù. ÀÏ¹Ý µ¥½ºÅ©Å¾À¸·Î DirectDraw ÇÁ·Î±×·¥À» ½ÇÇàÇÏ´Â °ÍÀÌ
ÁÁ½À´Ï´Ù.
- 3D-Maze È¸é º¸È£±â
"3D-Maze" È¸é º¸È£±â¸¦ »ç¿ëÇÏ´Â µ¿¾È µð½ºÇ÷¹ÀÌ ¹®Á¦°¡ ³ªÅ¸³¯ ¼ö
ÀÖ½À´Ï´Ù. Microsoft Service Pack 2 for Windows NT 4.0À» ¼³Ä¡ÇÑ ÈÄ¿¡
ÀÌ·± ¹®Á¦°¡ ¹ß»ýÇÒ ¼ö ÀÖ½À´Ï´Ù. ÀÌ·± µð½ºÇ÷¹ÀÌ ¹®Á¦´Â Service Pack 3
(¶Ç´Â º¸´Ù ÃÖ±Ù ¹öÀü) À¸·Î È®½ÇÈ÷ ÇØ°áµË´Ï´Ù.
- Winstone 97 ½ÇÇà
Winstone 97 º¥Ä¡¸¶Å©¸¦ ½ÇÇà ÁßÀÏ ¶§´Â (±âº» ¼³Á¤ÀÎ) CenterPOPUP
±â´ÉÀ» ºñÈ°¼ºÈ ½ÃÄÑ µÎ¾î¾ß ÇÕ´Ï´Ù. ÀϺΠÅ×½ºÆ®¿¡¼ CenterPOPUP¸¦
»ç¿ëÇÒ °æ¿ì ŸÀӾƿô ¿À·ù¸¦ º¸°íÇÕ´Ï´Ù.
- º¹¼ö ±×·¡ÇÈ Ä«µåÀÇ Á¦ÇÑ
Windows NT 4.0Àº ÃÖ´ë ¾à 280°¡ÁöÀÇ µð½ºÇ÷¹ÀÌ ¸ðµå¸¦
Áö¿øÇÕ´Ï´Ù (ÇØ»óµµ, »ö»óÇ¥ ¹× ¸®ÇÁ·¹½¬À² ¼³Á¤ÀÇ
Á¶ÇÕ). Çϳª ÀÌ»óÀÇ Matrox Ä«µå°¡ ÄÄÇ»ÅÍ¿¡ ¼³Ä¡µÈ °æ¿ì ÀÌ·±
Á¦ÇÑÀ» ¹ÞÀ» ¼ö ÀÖ½À´Ï´Ù.
»ç¿ëÀÚÀÇ ÄÄÇ»ÅÍ¿¡ º¹¼öÀÇ Matrox Ä«µå°¡ ¼³Ä¡µÇ¾î ÀÖÀ» ¶§ "VESA ¼³Á¤"
¿É¼Ç ´ÜÃß°¡ ¼±ÅõǾî ÀÖÀ» °æ¿ì, ¸¹Àº µð½ºÇ÷¹ÀÌ
¸ðµå¿¡¼ Windows NT 4.0 Á¦ÇÑÀ» °æÇèÇÒ °¡´É¼ºÀÌ
¸¹½À´Ï´Ù. ÀÌ·± Çö»óÀº "VESA ¼³Á¤" ¿É¼ÇÀÌ °¢ µð½ºÇ÷¹ÀÌ
ÇØ»óµµ¿Í »ö»óÇ¥ ¼³Á¤¿¡ ´ëÇØ ¿©·¯ °¡Áö ´Ù¸¥ ¸®ÇÁ·¹½¬À²À»
Áö¿øÇϱ⠶§¹®ÀÔ´Ï´Ù.
ÄÄÇ»ÅÍ¿¡ Çϳª ÀÌ»óÀÇ Matrox ±×·¡ÇÈ Ä«µå°¡ ¼³Ä¡µÈ °æ¿ì, "VESA ¼³Á¤"
¿É¼ÇÀ» »ç¿ëÇÏÁö ¾Ê´Â °ÍÀÌ ÁÁ½À´Ï´Ù. Microsoft "µð½ºÇ÷¹ÀÌ
µî·Ï Á¤º¸" ´ëÈ »óÀÚ¸¦ ÅëÇØ ¸®ÇÁ·¹½¬À²À» º¯°æÇϸé "VESA ¼³Á¤"
¿É¼ÇÀÌ È°¼ºÈµÊÀ» À¯ÀÇÇϽʽÿÀ.
- 3D Studio MAX 1.2
Matrox HEIDI µå¶óÀ̹ö¸¦ »ç¿ëÇÏ´Â 3D Studio Max 1.2 ½ÇÇà¿¡ ¹®Á¦°¡
ÀÖÀ» °æ¿ì, "ÀÏ¹Ý ¼³Á¤" ¾Æ·¡ÀÇ "¹ö½º ¸¶½ºÅ͸µ »ç¿ë" È®ÀÎ
»óÀÚ¸¦ ºñ¿ö µÎ½Ê½Ã¿À. ÀÌ È®ÀÎ »óÀÚ¿¡ Á¢±ÙÇÏ·Á¸é, "½ÃÀÛ" -> "ÇÁ·Î±×·¥"
-> "Matrox PowerDesk" -> "Matrox µð½ºÇ÷¹ÀÌ µî·Ï Á¤º¸" -> "¼º´É" ¸¦
Ŭ¸¯ÇÑ ´ÙÀ½.
- 3D Studio MAX 2.0
3D Studio Max 2.0 ½ÇÇà Áß¿¡ HEIDI ¼ÒÇÁÆ®¿þ¾î ¿¡¹Ä·¹À̼ǰú OpenGL
°¡¼Ó »çÀ̸¦ ÀüȯÇϸé, ¾Ö´Ï¸ÞÀ̼ÇÀ» Àç»ýÇÏ´Â µ¿¾È ºäÆ÷Æ®°¡
±õ¹Ú°Å¸± ¼ö ÀÖ½À´Ï´Ù. ÀÌ·± ¹®Á¦´Â 3D Studio Max ½ÇÇà
Áß¿¡ µð½ºÇ÷¹ÀÌ ¼³Á¤ (Çػ󵵳ª »ö»óÇ¥)À» º¯°æÇÏ´Â °æ¿ì¿¡µµ
¹ß»ýÇÒ ¼ö ÀÖ½À´Ï´Ù. ÀÌ·± ¹®Á¦¸¦ °æÇèÇϸé, 3D Studio Max¸¦
´Ý°í, µð½ºÇ÷¹ÀÌ ¼³Á¤ (Çػ󵵳ª »ö»óÇ¥)À» º¯°æÇÑ ´ÙÀ½,
3D Studio MAX¸¦ Àç½ÃÀÛ Çغ¸½Ê½Ã¿À.
[English...]
- 15-bit color palette support
A 15-bit color palette is no longer supported.
- Multi-display desktop support
With a multi-display desktop, all displays use the same color palette and
display resolution. The maximum display resolution you can select is
determined by the display with the highest maximum display resolution.
If a display in your multi-display desktop doesn't support a selected
display resolution, that display will automatically use a virtual display.
With a "virtual display", parts of your "display area" are off-screen. You
can move your mouse pointer to the edge of the screen to move the visible
part of your virtual display. This virtual display feature is similar to
using the Matrox zoom (PixelTOUCH) feature.
Note: The "virtual display" feature isn't available with the secondary
display of a DualHead-supporting graphics card. If a secondary display is
part of your multi-display desktop, the maximum display resolution you can
select is limited by the maximum display resolution of your secondary
display. For more information on DualHead, see "DualHead notes".
Software monitor settings help determine the maximum display resolution
for each display. If software monitor settings aren't properly selected for
all displays, one or more displays may become garbled or unusable if an
unsupported display resolution is selected. For more information on
selecting software monitor settings, see the online PowerDesk guide
(online.doc).
- Video playback with multi-display mode
In multi-display mode, digital video playback may be more limited than in
single-display mode. Specifically, some DVD or video playback programs may
not start at all or play back with lower quality. You may be able to run the
program and/or improve playback quality by closing the program, switching to
single-display mode, and then restarting the program. For more information
on switching to single-display mode, see other Matrox documentation.
This limitation may not apply to "DualHead Multi-Display" mode. For more
information, see "DualHead notes" in this file.
- OpenGL support
Note the following limitations related to the OpenGL driver included with
Matrox PowerDesk:
- OpenGL support may not be included in some versions of Matrox PowerDesk.
For a version of Matrox PowerDesk with OpenGL support enabled, see
the Matrox Web site (www.matrox.com/mga).
- Under Windows NT 4.0, OpenGL acceleration isn't supported with
Matrox MMS (Multi-Monitor Series) graphics cards or if you have more
than one Matrox graphics card installed in your computer.
- With DualHead-supporting graphics cards, OpenGL acceleration is
available while using "DualHead Multi-Display" mode under
Windows NT 4.0, (as long as there isn't another graphics card installed
in your computer).
- Using 3D Studio Max 2.0, you may experience problems with the viewports
being improperly redrawn. If this happens, simply click in a viewport
to properly update their display. (This problem isn't present with
version 2.5 or 3.0 of 3D Studio Max.)
- System memory requirements
Because of a limitation in Windows NT 4.0, you may experience problems
if your computer doesn't have more system memory than the total amount
of graphics memory used in your computer. To determine the amount of
graphics memory used in your computer, add the total amount of graphics
memory on each installed Matrox graphics card.
Depending on your total amount of graphics memory, here are some
recommended amounts of system memory for Windows NT 4.0:
Graphics memory | System memory
(total) | (recommended)
-------------------+------------------
32 MB | 64 MB or more
64 MB | 128 MB or more
128 MB | 192 MB or more
160 MB | 256 MB or more
- Full-screen DOS support with multiple graphics chip
If you have more than 10 graphics chips in your system (for example, 3
Matrox MMS-Quad cards), your system may stop responding when running a
DOS program in full-screen mode. If your DOS program supports it, run it
in a DOS window.
[...English]
Matrox TV Ãâ·Â
==============
¾î¶² ¸ðµ¨ÀÇ Matrox ±×·¡ÇÈ Ä«µå´Â TV Ãâ·ÂÀ» Áö¿øÇÕ´Ï´Ù. TV Ãâ·Â Áö¿øÀ¸·Î,
±×·¡ÇÈ Ä«µå¿¡ ¿¬°áµÈ TV ¶Ç´Â ºñµð¿À ·¹ÄÚ´õ·Î ÄÄÇ»ÅÍ µð½ºÇ÷¹À̸¦ º¸°Å³ª
±â·ÏÇÒ ¼ö ÀÖ½À´Ï´Ù.
±ÇÀå »çÇ×
---------
- TV Ãâ·ÂÀ» »ç¿ëÇÏ¿© °ÔÀÓÀ» ÇÒ °æ¿ì, 640 x 480 µð½ºÇ÷¹ÀÌ Çػ󵵸¦ »ç¿ëÇÒ
°ÍÀ» ±ÇÀåÇÕ´Ï´Ù. ÀÌ°ÍÀº TVÀÇ Çػ󵵰¡ ´ëºÎºÐÀÇ ÄÄÇ»ÅÍ ¸ð´ÏÅÍ¿¡ ºñÇØ ³·±â
¶§¹®ÀÔ´Ï´Ù. ³ôÀº µð½ºÇ÷¹ÀÌ ÇØ»óµµ (800 x 600 ¶Ç´Â 1024 x 768)¸¦ »ç¿ëÇϸé,
TVÀÇ µð½ºÇ÷¹ÀÌ°¡ ÄÄÇ»ÅÍ ¸ð´ÏÅÍ µð½ºÇ÷¹À̸¸Å ¼±¸íÇÏ°Ô º¸ÀÌÁö ¾Ê½À´Ï´Ù.
µû¶ó¼, ¾ÆÁÖ ¼¼¹ÐÇÑ ºÎºÐÀº TV·Î º¸±â ¾î·Æ½À´Ï´Ù.
- (Matrox G100/G200 Ä«µå¿ë)
Matrox ±âº» °í±Þ TV Ãâ·Â ¼³Á¤Àº ´ëºÎºÐÀÇ ÄÄÇ»ÅÍ ±×·¡ÇÈ (¿¹¸¦ µé¸é, ÄÄÇ»ÅÍ
°ÔÀÓ, ¶Ç´Â Windows ¹ÙÅÁ ȸé)À» ´ëºÎºÐÀÇ TV¿¡¼ º¸±â°¡ ÁÁ½À´Ï´Ù. ¹æ¼Û
Ç¥ÁØ¿¡ µû¶ó, Àüü È¸é ºñµð¿À¸¦ º¸±â¿¡ ´õ ¾Ë¸Â´Â °í±Þ TV Ãâ·Â ¼³Á¤ÀÌ ÀÖ½À
´Ï´Ù (¿¹¸¦ µé¸é, ºñµð¿À ÆÄÀÏ¿¡¼). ÀÌ·¯ÇÑ ¼³Á¤Àº ´ÙÀ½°ú °°½À´Ï´Ù:
NTSC
¹à±â : 180
»ö»ó Á¶Á¤ : 234
äµµ : 137
»öÁ¶ : 0
PAL
¹à±â : 167
»ö»ó Á¶Á¤ : 255
äµµ : 138
»öÁ¶ : 0
¸Þ¸ð: ÀÌ»óÀûÀÎ ¼³Á¤Àº, TV ¼³Á¤ Á¶Á¤ ¶ÇÇÑ ÇÊ¿äÇÕ´Ï´Ù. ´ëºÎºÐÀÇ ¼ÒºñÀÚ
ºñµð¿À ÀåÄ¡µéÀÇ ±âº» ¹à±â, »ö»ó Á¶Á¤, äµµ ¹× »öÁ¶ ¼³Á¤Àº ¹æ¼Û Ç¥Áغ¸´Ù
³ô½À´Ï´Ù. ÀÌ·¯ÇÑ ¼³Á¤À¸·Î ºñµð¿À¸¦ º¸´Â °ÍÀº ÀϹÝÀûÀ¸·Î Á¤»óÀÌÁö¸¸
ÄÄÇ»ÅÍ ±×·¡ÇÈÀ» º¼ ¶§´Â Á¤»óÀûÀÌÁö ¾ÊÀ» ¼ö ÀÖ½À´Ï´Ù. (µû¶ó¼, Matrox
±âº» TV Ãâ·Â ¼³Á¤Àº ºñµð¿À¿¡ ÀÌ»óÀûÀÎ ¼³Á¤º¸´Ù ³·½À´Ï´Ù.) TV ¼³Á¤À»
Á¶Á¤ÇÏ´Â ¹æ¹ý¿¡ ´ëÇÑ ÀÚ¼¼ÇÑ Á¤º¸´Â, TV ¼³¸í¼¸¦ ÂüÁ¶ÇϽʽÿÀ.
ÀÚ¼¼ÇÑ Á¤º¸
-----------
µð½ºÇ÷¹ÀÌ ¼³Á¤¿¡ ´ëÇÑ ÀÚ¼¼ÇÑ Á¤º¸´Â, Matrox ¼³¸í¼¿Í ¿Â¶óÀÎ ¼³¸í¼¸¦
ÂüÁ¶ÇϽʽÿÀ. »ç¿ëÇÏ´Â °ÔÀÓÀÇ µð½ºÇ÷¹ÀÌ Çػ󵵸¦ º¯°æÇÏ´Â ¹æ¹ý¿¡ ´ëÇÑ
ÀÚ¼¼ÇÑ Á¤º¸´Â, °ÔÀÓÀÇ ¼³¸í¼¸¦ ÂüÁ¶ÇϽʽÿÀ.
¸Þ¸ð: Matrox È®´ë/Ãà¼Ò ¹× °¡»ó ¹ÙÅÁ È¸é ±â´ÉÀº TV Ãâ·Â ¸ðµå¿¡¼´Â Áö¿ø
µÇÁö ¾Ê½À´Ï´Ù.
¶ÇÇÑ, ÄÄÇ»ÅÍ¿¡ Matrox ±×·¡ÇÈ Ä«µå°¡ µÑ ÀÌ»ó ÀÖÀ» °æ¿ì¿¡´Â TV Ãâ·Â ¸ðµå°¡ Áö¿øµ
ÇÁö ¾Ê½À´Ï´Ù.
[English...]
Note: For TV output with full-screen DOS display modes under Windows NT 4.0,
only text display modes (02h, 03h) are supported.
DualHead notes
==============
Certain Matrox graphics cards can use one graphics chip to control two
separate displays -- this is the Matrox "DualHead" feature. If you have a
DualHead-supporting graphics card, note the following under Windows NT 4.0:
- DualHead software controls (on the Matrox PowerDesk "DualHead" property
sheet) are only available if, when Windows NT 4.0 restarts, a secondary
display is connected to your DualHead-supporting graphics card. For more
information on DualHead software controls, see context-sensitive help.
- The "VESA settings" option isn't available when you're using a TV as your
secondary display.
- With the "DualHead Multi-Display" feature, DirectDraw and OpenGL
acceleration is available for the main and secondary displays of your
DualHead-supporting graphics card.
- With the "DualHead Multi-Display" feature, all displays in your system
may be limited by the display capabilities of the secondary display of
your DualHead-supporting graphics card. Specifically:
- Only a 16- or 32-bit color palette is available.
- The Matrox zoom feature (PixelTOUTCH) is unavailable.
- The mouse pointer is drawn entirely by the software. As a result, the
mouse pointer may flicker or disappear while it's in an area of the
display that's being redrawn quickly (for example, a video window).
- Because the secondary display doesn't support the "virtual display"
feature, the maximum display resolution of a multi-display desktop is
limited by the maximum display resolution of the secondary display.
- If you have a DualHead supporting graphics card and you're using DualHead
Multi-Display, Clone, or Zoom mode, digital video may appear as a solid
color on your secondary display. This can happen if video is played using
the hardware-overlay feature of your Matrox graphics card. Video played
using the overlay feature is generally of higher quality but it can be
viewed only on your main display.
Because only one program at a time can use the overlay feature, any other
program started while the overlay feature is used won't be able to use the
feature. The overlay feature will be available to the first program to
start after the program currently using the overlay is closed.
For video that normally uses the hardware-overlay feature, you may be able
to view the digital video on your secondary display by running another
instance of the video player. For example, if you're viewing a file using
the overlay feature with Microsoft Media Player, double-clicking on the file
again starts another instance of the Media Player. This instance properly
plays video on your secondary display. Then, you could close the first
instance of the Media Player and still be able to view video on your
secondary display.
- The "DualHead Clone" feature is unavailable if your DualHead-supporting
graphics card isn't controlling the primary display of your computer.
The "primary display" of your computer is the one that first displays
information when your computer restarts. For information on how to change
which graphics card controls your primary display, see your system manual.
- With the "DualHead Clone" feature, both the main and secondary
display of your DualHead-supporting graphics card use the same monitor
settings (specifically, the same vertical refresh rate).
If your secondary display is a TV, the vertical refresh rate is determined
by the TV standard selected on the Matrox PowerDesk "Monitor" property
sheet (60 Hz for NTSC, 50 Hz for PAL).
If your secondary display is a computer monitor, the "Monitor" property
sheet isn't available. In this case, use the "Refresh Frequency" control
on the "Settings" property sheet to change your vertical refresh rate. If
you select a refresh rate or display resolution that isn't supported by
either display, one or both displays may become garbled or unusable.
- With the "DualHead Clone" feature, the virtual desktop feature is
unavailable.
[...English]
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.