** ** ** VIA Rhine Family Fast Ethernet Adapter ** ** 32 Bit ODI Driver (CHSM, Specification v1.11) for Client32 in DOS/Windows 3.x ** ** v5.27 Dec. 2003 ** ** Introduction: ============= This document shows you how to setup the driver and how to use the enhanced functions by setting the custom keywords. Contents of the Subdirectory: ============================= FETNWSC.LAN The 32 Bit ODI driver for Client32 in DOS/Windows 3.x. FETNWSC.LDI The installation information file. CNT32DOS.TXT This file. Installation: ============= Before starting with the installation process, make sure that the adapter is properly installed and configured. You can use the diagnostic program (A:\SETUP.EXE) in DOS mode to make sure your connection with the network is correct. Install Driver While setting up your Client32: ---------------------------------------------- While you are installing Client32 programs, please have this driver diskette of the adapter near you. 1. When the Installation program ask you to specify a lan driver, please select "OTHER DRIVERS" or "User Supplied Driver" or "USER SPECIFIED 32 BIT DRIVER" to install driver from the diskette that come with your lan adapter. 2. Insert the driver diskette into your floppy drive, and specify the path of the driver in the diskette to copy the driver files to your system. 3. A STARTNET.BAT file will be generated in the Client32 directory. (\NOVELL\CLIENT32 or other if you change the default path) 4. When all the Clinet32 programs installation is completed, reboot your PC. System with existing Netware client programs: --------------------------------------------- If there are Client32 programs installed in your system already, you can use the following procedures to setup your driver. 1. Add a Load driver command line to your STARTNET.BAT file in your Client32 directory. For example: LOAD C:\NOVELL\CLIENT32\FETNWSC.LAN FRAME=Ethernet_802.2 The following is a sample of the STARTNET.BAT file: SET NWLANGUAGE=ENGLISH C:\NOVELL\CLIENT32\NIOS.EXE LOAD C:\NOVELL\CLIENT32\LSLC32.NLM LOAD C:\NOVELL\CLIENT32\CMSM.NLM LOAD C:\NOVELL\CLIENT32\ETHERTSM.NLM LOAD C:\NOVELL\CLIENT32\FETNWSC.LAN FRAME=Ethernet_802.2 LOAD C:\NOVELL\CLIENT32\FETNWSC.LAN FRAME=Ethernet_802.3 LOAD C:\NOVELL\CLIENT32\IPX.NLM LOAD C:\NOVELL\CLIENT32\CLIENT32.NLM 2. Execute STARTNET.BAT to connect to Server. NOTE: ============= 1. If want to use VID & TAG (HCHECKSUM for CHSM) keywords supported by management adapter, be aware of the string length limitation in DOS prompt. 2. Driver will be unable to be loaded if using Client32 for DOS Installer v2.01. Please use Installer v2.71 and later for CHSM Spec v1.11 driver.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.