SCOUNIX.TXT Driver File Contents (DPL-127bSkymaster.zip)

*****************************************************************************
*                                                                           *
*                      32-Bit PCI FAST Ethernet Adapter                     *
*                                                                           *
*                      Driver Installation for SCO UNIX                     *
*                                                                           *
*****************************************************************************

Contents:
---------
        A) MDI Unix Driver Installation for SCO ODT 5.0
        B) LLI Unix Driver Installation for SCO 3.2.4 (ODT 3.0)


Contents of the directory:
==========================
5.X\         SCO ODT 5.0 MDI Unix Driver

3.X\         SCO 3.2.4 (ODT 3.0) LLI Unix Driver

SCOUNIX.TXT  This file


A) MDI Unix Driver Installation for SCO ODT 5.0
   ============================================
   1. Login as root user. (On system maintenance mode)

   2. Put network driver diskette to floppy A: and use doscp command
      to copy the file "setup" for installing SCO UNIX Network Driver
      into UNIX's directory.

        # cd /
        # doscp a:/sco/5.x/setup /setup
        # chmod +x setup
        # ./setup

        Install 32-Bit PCI Fast Ethernet Adapter Driver (MDI)
        Please input source path ? ( ex: a:/sco/5.x )==> a:/sco/5.x
                                                         ^^^^^^^^^^
        (VOL.000.000 file will be created in the /tmp directory)

   3. Run custom to enter software manager procedure. From the menu select:

      Software -> Install New -> From scosysv (i.e. local host) ->
      Media Device (select "Media Images") -> keyin full path for "Image
      Directory" (i.e. /tmp)

      The "32-Bit PCI Fast Ethernet Driver (r8e) (ver 3.14)" message will
      appear. Select "Install". When custom has completed, quit custom.

   4. Use netconfig utility to add LAN adapter.

         # netconfig

   5. To add adapters, select "Add new LAN adapter" from "Hardware".
      The message "Select network adapter to be added:" will appear
      and select "32-Bit PCI Fast Ethernet Adapter (r8e)".

   6. "Network Driver Configuration" will appear. Please use arrow key to fill
      the configuration of your PCI adapter.

      Enter the configuration of 32-Bit PCI Fast Ethernet Adapter (r8e):
      Set speed and duplex mode::  | Auto_________________|v
         * - indicates conflict with other hardware

   7. Select SCO TCP/IP to add protocol.

   8. Enter the required information and use [TAB] key to press "OK"

        Local Host Name:  |scosysv_____________|
             IP Address:  |192.72.24.55________|
                Netmask:  |255.255.255.0_______|
      Broadcast Address:  |192.72.24.255_______|
            Domain Name:  |scosysv.com_________|
        TCP connections:  |1024________________|
            Pseudo ttys:  |64__________________|

   9. At "Hardware" menu select "Exit" to quit the netconfig utility.

  10. Do you want to relink to kernel now ?               y

  11. Do you want this kernel to boot by default (y/n)    y

  12. Do you want the kernel environment rebuilt (y/n)    y

  13. Reboot unix.

          # shutdown -y -g0



B) LLI Unix Driver Installation for SCO 3.2.4 (ODT 3.0)
   ====================================================
   1. Login as root user. (On system maintenance mode)

   2. Put network driver diskette to floppy A: and use doscp command
      to copy the file "install" for installing SCO UNIX Network Driver
      into UNIX's directory.

      # cd /
      # doscp A:/sco/3.x/install /install
      # chmod +x /install
      # ./install

      Install 32-Bit PCI Fast Ethernet Driver...
      Please input source path ? ( ex: a:/sco/3.x )==> a:/sco/3.x
                                                       ^^^^^^^^^^
   3. Use netconfig utility, available options :

      # netconfig

      The screen will display the following messages, and Select
      item (1) to Add a chain  :

      1) Add a chain
      2) Remove a chain
      3) Reconfigure an element in a chain
      4) Quit

   4. After the above option completed, the screen display next option
      messages :

      Select item ( ) : sco_tcp   SCO TCP/IP for UNIX

   5. When the user completed the above option, then various adapter
      drivers in SCO UNIX occur and select "32-Bit PCI Fast Ethernet Adapter
      Driver, board 0" item.

   6. Add chain sco_tcp -> r7e0 (y/n),   TYPE 'y'

   7. Type in the line speed parameter, or just key in "ENTER" for auto
      detecting line speed.

      Enter hard_default_setting, or auto, force 100 or 10bps, half or full duplex:
       (hwset auto 10half 10full 100half 100full) [auto] or 'q' to quit:  Type [ENTER]

   8. Enter the internet Address of this interface,
      for example : 192.72.24.55

   9. Enter the netmask for this interface (default 255.255.255.0).

  10. Does the interface use a broadcast address of all 1's (y/n),
      default : y

  11. Enter the boardcast address for this interface,
      default : xxx.xx.x.255             press ENTER

  12. Are these values correct ? (y/n)   TYPE 'y'

  13. Pseudo ttys are currently configured, do you want to:

         1) Add Pseudo ttys
         2) Remove Pseudo ttys
         Select an option or enter q to quit [q]   TYPE 'q'

      TCP connections currently configured, do you want to:

         1) Add TCP Connections
         2) Remove TCP Connections
         Select an option or enter q to quit [q]   TYPE 'q'

  14. Available options:

         1) Add a chain
         2) Remove a chain
         3) Reconfigure a element in a chain
         q. Quit

      Select option: q

  15. Do you want to relink to kernel now ?               y

  16. Do you want this kernel to boot by default (y/n)    y

  17. Do you want the kernel environment rebuilt (y/n)    y

  18. Reboot unix.

          # shutdown -y -g0

----
All trademarks or brand names mentioned are properties
of their respective companies.


Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: ftp, load: 1.83