SSD RELEASE HISTORY ------------------- SSD Description: NeoMagic 2200 Video Drivers v2.07.04Q Systems Supported: Latitude CPi A -------------------------------------------------------------------------------- Revision: A03 Revision Date: 08/26/99 -------------------------------------------------------------------------------- File Description: 05/24/99 04:31p 39,936 Install.doc 02/04/99 04:33p 4,791 Install.txt 10/09/98 05:05p 3,985 License.txt 05/24/99 03:08p 397,312 Neomagic.dll 08/21/98 04:03p 29,343 NEOMAGIC.HLP 06/23/99 07:12a 7,758 NMGC5.cat 06/15/99 05:04p 77,016 NMGC5.DRV 06/23/99 07:12a 5,151 Nmgc5.inf 05/24/99 03:16p 4,192 NMGC5_16.DLL 05/24/99 03:16p 24,576 NMGC5_32.dll 05/24/99 03:09p 7,846 Nmgc5VD2.vxd 05/24/99 03:10p 17,810 Nmgc5Vdd.vxd 06/15/99 05:04p 24,400 NMGC5VPM.drv 05/24/99 03:11p 135,168 NMGCDD5.dll 03/06/98 03:07p 67,080 TSB.dll Revision History: VERSION A03 - 2.07.04Q (08/26/99) This driver fixes the following issues: - Garbage appears when clicking on the wallpaper selection in 800x600x24bpp with simul mode. - Corruption on windows graphic at 1024x768 after the use of the hot-key to switch to CRT only from simul mode (svga panel). - In Explorer, the white garbage is remaining on the file name, when you click the file name at true color. - Sometimes the taskbar is cut off after switching from CRT only to LCD by Hot-key (Win98 1024x768 mode). - Running Winstone99 at 800x600x24bpp and 1024x768x24bpp, major corruption was noted during the test. - Mouse pointer missing with dual display enabled (256 color mode). This driver fixes the following TV issues: - Cannot enable dual display on LCD and TV. - Flicker on TV during/following DVD playback. - Flicker on TV screen in Dual Display mode. - Incorrect TV position after switching PAL to NTSC - The right side of TV Panning area is not shown when changing to TV using Display Properties. - New TV picture position settings are not saved. This driver fixes the following movie related issues: - In Independent Display and Timing (IDT) mode, MPEG-to-GO video window is corrupted on the Secondary display (CRT-1024x768x8bpp) keeping the Primary display in 1024x768x8bpp mode. - In IDT mode, any active movie is corrupted on the Secondary display (CRT-1024x768x8bpp) after playing a MPEG-to-GO video while the Primary display is in 1024x768x8bpp mode. - Characters are flickering in beginning of DVD movie. - Green or red line flashing on the bottom when play active movie with VCD. - Magenta line (Color key) at right edge when playing a DVD video at 640x480 in expanded mode on the LCD. This driver fixes the following cultural/Language issues: - Truncated characters in TV optionswith Korean, Traditional and Standard Chinese. - Wrong German translation under CRT options in Advanced Settings and TV Options in Windows 9x OS. - Added Dutch translations. VERSION A02 - 2.06.02Q (05/24/99) The following issues were fixed. - Corruption appeared when Secondary display times out. - Going into System Setup, or toggling to a full screen DOS session, causes the video overlay (DVD) to freeze. - Dutch language appeared in German OS. - Active Movie v2.0 shuts down in full-screen mode in Standard Chinese, Traditional Chinese, and Korean. - Cosmetic issues with Standard Chinese, Traditional Chinese, and Korean. - Region 2 PAL DVDs had corruption on the right side. VERSION A01 - 2.05.06Q (03/22/99) The following issues were fixed. - Issue related to DOS box corruption in Windows. - 1024x768x24-bit CRT-only mode, rapidly resizing an MPG video causes a GPF error message. - DVD image corruption and the mouse cursor changing to a square when playing a DVD movie automatically. - Corruption issue associated with 1024x768x16-bit CRT-only mode, using the screen saver "Organic Art (Plus 98)", and dragging the Display Properties window around the desktop. - Some icon and text corruption associated with DirectX 6.0. - Issue where clicking the Neomagic tab in the Virtual Desktop, the viewport jumps to the upper left position when in panning mode. - [98 MultiMonitor]: Issue where secondary monitor corrupts when monitor toggle on from monitor timeout mode. - Warmdocking switch to CRT is overriden by the driver, it causes a switch back to LCD. - Corruption with text caused by Active Desktop or Plus Pack with the following options enabled: Show Window Contents while Dragging and Smooth Edges of Screen Fonts. - Some graphics corruption while doing certain accelerations in 24-bit mode. - Japanese reboot box for Dual-Display was in English. - NeoMagic properties tab is cut off in Korean, Traditional Chinese, and Standard Chinese. VERSION A00 - 2.03.05Q (02/04/99) - Initial ReleaseDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.