Windows Millennium Edition
Introduction:
-------------
This document describes the procedure to install Windows Millennium
driver for Planet ENW-9503/-9504 PCI Fast Ethernet adapter.
Location of Driver : \Winme\ENW9503.SYS
Installing driver procedure on Microsoft Windows Millennium Edition:
-------------------------------------------------------------------
Before you start with the installation process, make sure that your
adapter should be properly installed in your PCI bus slot.
Executing Windows Millennium, it will auto-detect your system
configuration and find the adapter hardware.
1. Windows ME will install built-in driver "Realtek ENW9503(A) PCI
Fast Ethernet Adapter" automatically.
2. Restart your computer, then you can update the newer driver from
the provided Driver Diskette.
3. Click right button on "My Computer" icon from Desktop then choose
the "property" item from popup menu.
4. Select "Device Manager" page.
5. Windows ME will prompt all device groups in your computer, please
select "Network Adapter" group.
6. Double click the "Realtek RTL8139(A) PCI Fast Ethernet Adapter"
device from "Network Adapter" group.
7. Click "Driver" button in "Realtek RTL8139(A) PCI Fast Ethernet
Adapter Properties " dialog box.
8. Click "Update Driver ..." button
9. From "Upgrade Device Driver Wizard" window, please choose
"Specify the location of the driver..." then click Next button.
10. Insert the Planet ENW-950x driver disk into drive A and specify
the setup file pathname A:\WINME in the "Upgrade Device Driver
Wizard" dialog box, then click "Next" button.
11. Windows will prompt inf file path "C:\WINDOWS\INF\...." in the
"Upgrade Device Driver Wizard" dialog box, please select "Install
one of the Drivers" then click Next button.
12. Windows will prompt a dialog box for you to choose the proper
driver,please select "ENW-950x RTL-based PCI Fast Ethernet
Adapter" and the location is "A:\WINME\...." then click Next
button.
13. Click "Finish" button in the "Upgrade Device Driver Wizard" dialog
box. then you restart the system.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.