; ***** ALLEGRO *****
;localization strings
100=ESS Aux
101=ESS CD-Audio
102=ESS Wavetable Synthesis
103=ESS Record
104=ESS Playback
105=ESS Mixer
;about mixer
106=20dB
107=Meter
108=Mute
109=Record Source
121=Volume Control
122=Vol
123=Recording Control
124=Rec
125=Line
126=CD
127=Aux
128=Video
129=Microphone
130=Phone-In
131=Mixer
132=Monomix
133=Synth
134=Wave
135=MonoOut
141=Line 2
142=CD 2
143=Aux 2
144=Video 2
145=Microphone 2
146=Phone-In 2
147=Mixer 2
148=Monomix 2
149=Dock Spkr
150=System Spkr
151=Power Management Enable
152=Level-1/Level-2
153=Mic-2
154=PC Speaker
155=PC Speaker 2
156=Docking Speaker
;--------------------------------------------------------------------------
; In order to take advantage of the following features, you have to
; 1) take out the first column of ";" from each line you want to use.
; 2) change the right hand side value of "=" depending on need.
; 3) take out ";" from the line containing ;config.ini
; between [allegro] and 1:allegro.sys in file "oemsetup.inf".
; (Here, a line starting with ";" means it's commented out.)
;--------------------------------------------------------------------------
;
; ** START MIXER CUSTOMIZATION for NORMAL/DOCK/UNDOCK States **
;
; Values are Double Word based in reversed format,
; (eg. "03,02,01,00" is really 00010203 Hex)
;
; Bit 0 is for Dock (1 = Enable Control, 0 otherwise)
; Bit 1 is for UnDock (1 = Enable Control, 0 otherwise)
;
; Destination (Speaker, Headphone, etc.)
SystemMic20DB=3 ; Undocked=YES, Docked=YES
;DockMic20DB=1 ; Undocked=NO, Docked=YES
; D11/D12 Power Management (2 = ENABLE, 0 = DISABLE)
D11D12APM=0 ; Undocked=NO, Docked=NO
; System CODEC Source Map Output (CD, LINE, AUX, etc.)
SystemCD_Out=3 ; Undocked=YES, Docked=YES
SystemLINE_Out=3 ; Undocked=YES, Docked=YES
SystemMIC_Out=0 ; Undocked=YES, Docked=YES
; System CODEC Source Map Input (CD, LINE, AUX, etc.)
SystemCD_In=3 ; Undocked=YES, Docked=YES
SystemLINE_In=3 ; Undocked=YES, Docked=YES
SystemMIC_In=3 ; Undocked=YES, Docked=YES
SystemMIXER_In=3 ; Undocked=YES, Docked=YES
; Docking CODEC Source Map Output (CD, LINE, AUX, etc.)
DockCD_Out=1 ; Undocked=NO, Docked=YES
DockLINE_Out=1 ; Undocked=NO, Docked=YES
DockMIC_Out=0 ; Undocked=NO, Docked=YES
; Docking CODEC Source Map Input (CD, LINE, AUX, etc.)
DockCD_In=1 ; Undocked=NO, Docked=YES
DockLINE_In=1 ; Undocked=NO, Docked=YES
DockMIC_In=1 ; Undocked=NO, Docked=YES
DockMIXER_In=1 ; Undocked=NO, Docked=YES
;
; ** OTHER CUSTOMIZATIONS **
;
DetectDockingLineOut=1
SoftexAPM=1 ; 1/0 = enable/disable Softex Power Management Support
enableHwVol=1
;EnableAutoInstall=1 ; 1/0 = automatic/manual installation
;New_Laptop.Sys=1 ; 1/0 = New/Old Laptop.sys ("New" Laptop.sys means from Jan. 7, 1998 or later)
;Mic20dBOn=1 ; 1/0 = enable/disable Mic Volume 20dB boost
;enableMPU401=1 ; 1/0 = enable/disable MPU401
; Change the first 0 to 1 to enable secondary AC97 line out detection
; Disable secondary AC97 line out detection
;Default2ndMic=0 ; 1/0 = default Mic is 2nd/1st Mic.
;DefaultPCSpeakerMute=0 ; 1/0 = default of PC Speaker is mute/unmute (* AC97 Codec ONLY *)
;EnableDockingAllinAllout=1 ; 1/0 = enable/disable All-in-All-out
;PCMOutValue=4 ; 0 - 8 ( 0=min, 8=max)
;DefaultMasterVol=A0A0 ; hex value (0000-FFFF)
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.