PLANET ADSL VPN/Firewall Router Family Firmware Release ========================================================================================================================== Product supported : ADE-4200, ADW-4200, Annex A and Annex B Release History ------------------------------------------------------------------------------------------------------------------ Version: V4.54c15 (July 29, 2004) Improvement: -ボ Correct some translations with other languages. Bug Fixed: - Fix low data transfer rate in Win 98 Network neighborhood. - Fix interoperability issue with Senao wireless bridge WPA. - Fix crash problem by improving VPN L2TP buffer size. - Fix L2TP outgoing established and makes an error message ¡§AtmChannel creat failed¡¨. Version: V4.54c12 (July 16, 2004) Improvement: -ボ Add L2TP Tunnel Authentication function and provides WEB GUI for setting. -ボ L2TP setting will return an error page when the Connection Name field is blank. -ボ Add IKE proposal setting. - Improve showing issue when doing change between WEP and WPA. The WEP key will set to 64bit when changing back from WPA. - Improve flash saving protection when flash partition is corrupted. The system will do format first. - Improve showing issue when using static IP with RFC 1483 and then change to PPP that static IP information will be cleared as well. - Chang wireless STA time out value from 60 to 180 sec. - Change Annex B DSP code to version A.27.4.14. - Add WPA feature for both 7500GL and 7560G. - Add the default authentication for PPPoE/PPPoA when SCANPVC detect and modify transport. - Improve interoperability with Intel Centrino when Centrino using power saving mode. - Delete Default route before change WAN setting. - Add VPI/VCI 0/50 to database for auto scanning. Bug Fixed: -ボ Fix bug when using IP address range with IPSec. -ボ Fix bug that clicking restart to factory default and it does not work. - Fix conversion issue between HEX and ASCII of wireless WEP key. - Fix L2TP simultaneously exist in/out session bug. - Fix L2TP bug between BIPAC and LNS, regard message as ZLB when L flag=0. - Fix L2TP crash issue, if L2TP connection is connected and that will make system crash when doing disable and delete immediately. - Fix the bug that cannot store more than 7 entries in the MAC Address Filter. - Fix the bug when using Win XP to browse router¡¦s web and change left pane menu quickly that makes system hanging. - Fix the bug when doing system restart via WEB GUI and get warning page immediately sometimes. - Fix PPTP dial-out connection cannot transfer data after session idle exceed. - Fix data cannot transfer after PPTP connection is disconnected with data flow and reconnect again. - Fix ARP showing issue when doing change with Ethernet IP. - Fix WPA bug with Macintosh wireless client. - Fix NAT session table inform no session but has session table page. - Fix IPSec "Remote Gateway" information is always show Gateway Address. - Fix Web cannot access after UPnP disabled and use Windows XP several hours on LAN. Version: V4.54c7 (June 10, 2004) Improvement: Bug Fixed: - Fix NAT session table always show first session. - Fix NAT session table inform no session but has session table page. - Fix WPA idle timeout issue. Version: V4.54c6 (June 08, 2004) Improvement: - Modify NAT Session status page look. - Add warning message in Hostname page. - Enhance 802.11g heavy traffic issue. - Change Annex A DSP code from A.27.4.7 to A.4.19.17 Bug Fixed: - Fix ADSL lock up issue when UPnP is disabled. - Fix VPN PPTP dial-out cannot transfer data after when session idle exceed 2 minutes. - Fix WPA idle issue. - Fix FTP General error issue (If PARTITIONS 2 has no im.conf, then the next put config.dat file will show General error.) Version: V4.54c5 (June 04, 2004) Improvement: - PPPoE/PPPoA username, password increasing buffer to 128. - Modify WPA idle timer from 120 to 3600 sec. Bug Fixed: - Fix wireless association error. Version: V4.54c (May 06, 2004) Improvement: - Add LLC header option for PPPoE and PPPoA. - Add ¡§Coding Gain¡¨ option for ADSL interface. Version: V4.54b17 (April 30, 2004) Improvement: Bug Fixed: - Fix WEP Key 128 bit does not work with 11b product. Version: V4.54b16 (April 30, 2004) Improvement: - Change WebGUI style - Add IPsec Aggressive mode and FQDN/USER_FQDN ID types for a certain time. - Change telnet idletime close from 100secs to 5 minutes - Add check restart to default setting after upgrade. Bug Fixed: - Fix webGUI set SNTP server all same IP will cause system crash issue. - Let Web firmware upgrade status more smooth. - Fix WAN status web page error if WAN interface change from rfc1483 to ppp. - Fix WebGUI configure WAN interface to rfc1483 bridge mode don't back finished page. - Fix system lock up issue while firewall memory isn¡¦t enough. Version: V4.54b14 (April 20, 2004) Bug Fixed: - Fix the SNTP will trigger the PPP autoconnect. Version: V4.54b13 (April 16, 2004) Improvement: - Add www.tzo.com and www.enom.com DDNS server. - Add DHCPserver can configure Allow Bootp and Allow Unknown Clients. - Add webGUI show the NAT session table. Version: V4.54b11 (April 14, 2004) Improvement: - Improve double login page. - Add double confirm password in webGUI/User Management - Add warning message on webGUI/Block WAN request. - Change webGUI/Restart time from 45 to 50 seconds. - WebGUI use unique WAN interface name and modify ¡§delete¡¨ to ¡§change¡¨ wan interface - Add display the NAT Sessions in CLI. Bug Fixed: - Fix IRC NAT passthrough problem. - Modify ADSL bun driver for Impulse test. - Fix wireless model 802.11b WEP key save issue Version: V4.54b4 (April 6, 2004), Bug Fixed: - Fix cannot set the MTU from Web GUI - Fix DHCP server failed. After PPP get DNS information to DHCP server with DHCP server was disabled. Version: V4.54b (March. 26, 2004), Improvement: - Add "dyndns.dk" DDNS server. - Add IPSec/EPS encryption/AES support 192bits and 256bits key length - From GvsLS comment, system cool start must double SDRAM reset delay to meet SDRAM reset time. Change Boot code version to v4.59 "22 March 2004" Bug Fixed: - Fix PPTP VPN dial-in link established but can't access peer network bug. - Fix L2TP VPN several bug. - Cannot make connection after system re-start - Connection and data access failed while end-to-end use our product - Make connection spend time too long - Sometimes system crash Version: V4.54a1 (March. 10, 2004), Improvement: - Add WebGUI support PPP with no Authentication case - DNS client with multi-domain name. Bug Fixed: - Fix autoscan crash issue when detect PPPOE case. - Fix UPnP update WAN interface connection status to PC. - Fix Port Scan server detect DNS and SSH port. Version: V4.54a (Feb. 25, 2004), Improvement: - Add AutoScan PVC for easy setup.(some product don¡¦t open the feature) - DNS client with multi-domain name. Bug Fixed: - Fix PC UPnP cannot find our device after LAN IP changed. - FixUPnP update WAN interface connection status to PC. - Fix wrong PPP connected/disconnected status to log. Version: V4.53 (Feb. 25, 2004), Improvement: - Add QoS feature for wireless - virtual server (PortForwarding) modify some port range to one port configuration. - Add ADSL Setting to WAN list. - Change default factory setting SNTP server IP to Hostname. - ADSL AnnexA parameter change Ec mode -> Fdm mode . Bug Fixed: - Fix DHCP server loss memory resource issue when DHCP server receive unknown subnet "DHCPINFORM" message. - Fix browse WebGUI loss cayn buffer issue. - Add TxPowerLevel default value for wireless - Disable L2TP MIB otherwise cause SNMP utility failed. - Fix EventLog "no attributeEqual". - Fix SNTP photo problem Version: V4.52d (Feb. 06, 2004), Improvement: - Add L2tp feature. - Add New CLI Command status of firewall "firewall status". - ADSL AnnexA parameter change FDM mode -> EC mode and Annex B set default DyingGasp enable. Bug Fixed: - Fix VLAN feature bug.. - Fix cannot use logInfo to log information bug.. Version: V4.52c (Jan. 29, 2004), Improvement: - Update ADSL driver PHY code version to ¡§A.27.4.7¡¨ and the turbo bun driver version to ¡§1.40¡¨ - Add new flash type MBM29DL32BF and need change boot code version to 4.57. - WebGUI add message in firewall Enabled. Bug Fixed: - Fix remote side TCP packet no PUSH setting problem.(743 pptp vpn connection failed). - Correct some Finnish translation errors in WebGUI. Version: V4.52b (Jan. 06, 2004), Improvement: - Merge AnnexB ADSL driver and update the turbo bun driver version to ¡§1.39¡¨ - Add a switch to allow a FTP connection via proxy server or not. - Add new functions of the URL Filter to block IP URL and Java_applet. - Add one DDNS server www.3322.org. Version: V4.52a (Jan. 02, 2004), Improvement: - Virtual Server configuration web page can display LAN IP table. - Add Block WAN Request. Bug Fixed: - Fix rfc1483 dhcpclient get DNS address cann't pass to DNS client. - Fix remote access will crash system when WAN nat disabled. - Fix webGUI not found some webpages bug, update language_0_en.translations. - Fix ADM6996L unstable problem when boot procedure and change boot code version "4.55 16 December". - Fix ADSL link Down no Event log. Version: V4.51 (Dec. 04, 2003), Improvement: - QoS function - Add ppp disconnect cause to WebGUI - IPsec support FQDN - SNMP add wireless interface MIB - WebGUI add uPNP Port Status - Block WAN request - Allow user to control whether open firewall/portfilter automatically when creating virtual servers munually or via UPnP. - Add new flash type Fujitsu and change boot code version to 4.53 date is 04 December 2003. - Update ADSL driver to A.27.4.1 Bug Fixed: - Fix incorrect IV when applying AES to IKE channel - Fix WebGUI cannot select ADSL connected Mode - Fix pptp vpn dial-in too many connect/disconnect then crash system - Fix pptp pass-through - Fix change dhcpserver config failed when pppoe established - Fix PPTP,firewall,ipsec,remote Web WAN looking - Fix WAN nat disable the ImNAT find wrong interface - Fix WAN configuration display error ip information - Fix firewall cannot log issue - Fix VLAN configuration - Fix cannot get wireless statistics after add WPA Version: V4.50n (Nov. 12, 2003), Improvement: - DHCP server support up to 253 clients. - SNTP support multi-servers - Change boot code version to 4.52 date is 10 November 2003 - Add Qos WebGUI configuration Bug Fixed: - Fix PPTP VPN dail-in bug. - Fix "dhcpclient release cause system crash" - Fix WebGUI config remote access will crash when Wan interface NAT is disabled - Fix "destination"---->language error - Fix WebGUI status text error - Fix PPP idle time can't work issue - Fix ADSL can't link hinet issue. - Fix use "chips info" command query the MAC is NULL - Fix WebGUI backup function error message - Fix warm start wireless card failed if have associated clients. - Fix WebGUI reset get wrong http:// - Fix add rfc1483, delete rfc1483, add PPPoE Routed , delete PPPoE Routed,can not complete delete the PPPoE. Version: V4.50m (Oct. 22, 2003), Improvement: - Add impulse test to ADSL driver - Let AH(51).ESP(50) be named in firewall Port Filters - Change WebGUI messagge "successful" into "Save Config to FLASH successful" - Add WebGUI display RIP Routing table. Bug Fixed: - Fix set "/" attribute value problem - Fix telnet issue "get /" - Fix "Primary DNS Server Address" edit in DHCP Server webpage - Fix "PPPOE Routed" edit page error - Fix SNTP poll interval up to 9999 mins. - Fix check mail auto-dialup problem - Fix SIP ALG bug - Fix scanpvc twice will system crash - Fix WebGUI ¡§ActivateLine¡¨ cannot control - Fix ¡§After add/delete rfc1483 Routed WAN interface. Add PPPoE Routed WAN interface and make connection, then delete this interface. But found can not complete delete the PPPoE.¡¨ Version: V4.501 (Oct. 6, 2003), Initial release due to code has a large change since the version.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.