EtherPCI LAN Card II Setup Instructions for Microsoft Windows NT ----------------------------------------------------------------- Contents Before You Begin Setup NT 3.51 Installation Technical Support Before You Begin ---------------------------------------------------------------------- Thank you for purchasing your EtherPCI LAN Card II from Linksys. The instructions below explain how to set up the card's software drivers for use with your network software. Be sure to read the User Guide before installing your card. In addition, please make note of these hardware & software guidelines: * Plug-and-play computers have a number of expansion slots inside. Each slot has a pre-assigned interrupt (IRQ) and I/O address (MEM). When the Linksys LAN Card is inserted into a PCI slot, the PC's BIOS should automatically assign a unique IRQ & MEM value for the network card. In most cases, the card should work fine using the pre- assigned IRQ and I/O addresses. Occasionally, however, the card may have an IRQ conflict with other adapters in the system. If this happens, you will need to change the IRQ setting of the LAN Card manually. There are three possibilities: - Your PCI may not allow you to change the IRQ value(s) of the PCI slot(s). In this case, you will ONLY be able to use the IRQ & MEM values that have been pre-assigned to each slot. - You may be able to change the IRQ & MEM values for a given PCI slot by setting jumpers on your PC's mother board. Please refer to your PC's motherboard user guide for specific instructions. - Your PC may allow you to change the IRQ & MEM values for a given PCI slot by accessing the PC's BIOS setup menu. Please refer to your PC's user guide for specific details. Although it is advisable to set a unique IRQ address for each PCI slot, depending on your PC, you may or may not be able to do so. Setup ----------------------------------------------------------------- NT 3.51 Installation 1. Start up your computer and NT. 2. Double-click the 'Control Panel' icon in the 'Main' Program Group. 3. Double-click the 'Network' icon from the 'Control Panel' Window. 4. Click the 'Add Adapter' Button in the 'Network Settings' Dialog Box. 5. When the 'Add Network Adapter' Dialog Box appears, select the '<Other> Requires disk from manufacturer' item in the list of network cards and then press <Enter>. 6. When asked for the pathname to open, insert the Linksys Program Disk into drive A: and type A:\WINNT\NT35x then press Enter. 7. Select the 'Linksys LNEPCI II PCI Adapter' item in the 'Select OEM Option' Dialog Box and then click the 'OK' Button. 8. If there is only one LNEPCI II card in your system, click the 'Ignore' Button when the 'Input Ethernet ID' Dialog Box appears. Otherwise, type Ethernet IDs when the 'Input Ethernet ID' Dialog Box appears and then click the 'OK' Button. 9. Bind the adapter to the transport drivers by choosing the 'Binding' Button in the 'Network Settings' Dialog Box. 10. When you finish the installation procedure, click OK and restart your computer. The installation is complete. HOW TO GET TECHNICAL SUPPORT ------------------------------------------------------------------------ There are a variety of methods that you can use to get FREE technical help or sales information about Linksys products. Voice & FAX ------------ The Linksys voice line is open during normal business hours, 7-5 p.m., Pacific Standard Time. The fax line is available 24 hours a day. When sending a fax, be sure to include a detailed description of any problem(s) that you are experiencing. Technical Support Hotline (949) 261-1288 Fax (949) 261-8868 E-mail ------ To get technical or sales information bounced back to you from Linksys automatically, send some e-mail to the address below. Include the name of the product that you want help with, along with the word HELP, in the subject line of your e-mail. Example: HELP ME WITH THIS PRODUCT. (If requesting sales information, use the word SALES instead of HELP). E-mail Address support@linksys.com Internet Access --------------- You can also use your World Wide Web or FTP browser to visit Linksys on the Internet. Web Site http://www.linksys.com FTP File Transfer Site ftp.linksys.com Bulletin Board System (BBS) --------------------------- To access the Linksys Bulletin Board System (BBS), set your modem to 8 bits, No parity, 1 stop bit, and call (949) 261-2888. Use a speed setting of 33.6bps or slower. When downloading files, use the "Z-modem" download protocol for best results.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.