FR-XRT401B-V218.txt Driver File Contents (

PLANET Broadband Router Family Firmware Release

Router supported : XRT-401B
Release date:   	    11/29/2003
New Release Version:        2.18

Added Features and Firmware Changes:
version 1129V2.18 (dated Nov.29,2003)
a). Fixed uPnP can't work issue

version 1126V2.18 (dated Nov.26,2003)
a). PPTP connection issue in Europe
b). Memmory Allocation issue when DDNS enable
c). DDNS client doesn't update when DHCP client change IP
d). system hangup when play UDP video streaming over 1Mbps throughput
e). Ping from LAN port will be block when enable 'block hacker scan'issue

version 2.03
a) Added: "Incoming Access Log".
b) Added: "Outgoing Access Log".
c) Added: UPnP service (discovery phase).
d) Change: DDNS minimum refreshing interval adjusted to 1 min.
e) Added: "UPnP forwarding" menu.
f) Added: "Special applications" menu.
g) Changed: Help content revised.
h) Changed: Manual connect priority higher than Dial-On-Demand
i) Changed: Default Remote management port has been assigned to 8080.
j) Fixed: Virtual server port conflict while WAN alias enabled.
k) Added: default router name in status menu

version 2.04 (dated Jan.9,2003)
a) Fixed: machine failed booting after enabling Remote Management feature.

version 2.10 (dated Jan.15, 2003)
a) Fixed: Korean Soribada issue
b) Added: MTU adjustment for PPPoE and PPTP connection
c) Patched: Shields Up status to 'stealth' except IDENT port.
d) Added: Support MSN Messenger version 4.7/5.0 File Transfer/Audio.
e) Fixed: Korea PPTP connection issue.
f) Added: Support LAN2LAN Virtual server issue (NAT lookup).

version 2.10 (dated Jan.23, 2003)
a) Fixed: DNS resolution failed, while client side is DHCP enabled.
b) Added: DDNS service provider: for PRC area.

version 2.11 (dated Mar.28, 2003)
a) Fixed: PPPoE connection  "Connect on Demand" feature sometimes can not work after idle timer activated.
b) Added: Performance enhancement while online gaming server located behind XRT-401B.
b) Fixed: In DHCP mode if ISP's lease time is 30 minutes, XRT-401B will not obtain new IP address after lease new IP from server many times. 
d) Added: ALG for IKE protocol.

Upgrade Method
To upgrade the firmware of your router, please logon machine and click on the "Tools" menu. In "Tools" menu, choose "Upgrade". In this page. You can also use the Browse button to allocate the firmware file on your PC.
Once the new firmware file is selected, click Start bottom to begin firmware upgrade process. Once the upgrade is complete, you may start using XRT-401B.

If the firmware release date on your machine is earilier than Jan. 23, 2003, please be sure to perform a reset to activate new configurations in machine.
"Reset" option can be found in the "Tools" menu in machine.

Thanks for choosing PLANET products, any comment or feedback will be appreciated.

Best Regards ,

PLANET Tech SupportTeam

Broadband router Technical
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web3, load: 1.20