1. FW-VRT401_1633B.zip Driver
2. FR-VRT401_1633B.txt File Contents

FR-VRT401_1633B.txt Driver File Contents (FW-VRT401_1633B.zip)

PLANET Broadband VPN Router Firmware Release
-----------------------------------------------

Router supported : VRT-401
Release date:   	    1/15/04
New Release Version:        1.6 Release 33b
Previous Release: 	1.6 Release 33a

Added Features and Firmware Changes:
===================================

a) Fix Firewall rule UI problem

version 1.6 release 33a
a) Update UPnP kernel to make UPnP work;
b) Fixed:ping -l 32768 makes device hangup.
c) Update firewall kernel;
d) Fixed: Config two or more firewall rules with "log always",but only displays the first rules matching issue;
e) Fixed: Select a virtual server, not enable, but it is still added
f) Fixed: Restore config file which remote vpn endpoint is domain name, then remote vpn endpoint changes to "dynamic IP";
g) Fixed: Change login name ,but can't work;
h) Fixed: When log is full, then can't clear log.
i) Not show DoS attack log.

version 1.6 release 28
a) Added: ALG support for MS Protrait
b) Fixed: DDNS to DDNS VPN tunnel establishment

version 1.6 release 26

a) Added: function of update dmz data (support Ip Phone)
b) Fixed: VPN policy name length is not right (will overwrite memory)
c) Update new UI
d) Fixed: ping big packet cause device hangup
g) Fixed: machine will hangup during long run test when RIP is enabled.

version 1.6 release 23
a) NAT Disable
b) Accept VPN Tunneling via Domain Name
c) Virtual Server Port Mapping
d) System Parameter Backup/Restore
e) Individual WAN Configuration (under "Internet" Menu)
f) SPI Enable/Disable (= DoS Enable/Disable)
g) SPI Threshold Adjustment
h) Multiple DMZ

version 1.6 release 17
a) Device name display corrected.

Firmware Upgrade
================
To perform the Firmware Upgrade:
a) Please ensure a stable power supply before proceeding firmware upgrade.
b) Logon VRT-401, and find the upgrade menu in Miscellaneous option. Click the "Browse" button and navigate to the location of the firmware file.
Select the upgrade file. Its name will be displayed in the Upgrade File field.
Click the "Start Upgrade" button to complete firmware upgrade.

Please note: 
After loading firmware to this release (1633a), please be sure to refer to the following steps to perform machine default process to activate the new configurations in machine.

Following steps can be used to reset configurations on VRT-401 to default state:
--------------------------------------------------------------------------
1. Power off machine, and press the reset button on the rear panel (Reset button is located beside the power plug).
2. Power on machine, do not release the reset button, wait till the red status LED on front panel flashes twice, then release reset button.
3. Use ping command to verify is machine is reset to default configuration (IP address: 192.168.0.1, no logon username/password required )
4. If there are responses from VRT-401, use Internet browser to logon VRT-401 and start machine administration. (no logon username/password required ).
--------------------------------------------------------------------------


Thanks for choosing PLANET products, any comment or feedback will be appreciated..


Best Regards ,


PLANET Tech SupportTeam

Router Technical support:support_router@planet.com.tw