Please use the following instructions to install the application.
Installation:
- Use a:\install or b:\install to install the application.
- Reboot the machine.
- Double click on Media Player or MPEG Remote to start MPEG playback.
Notes:
1. Compton's Encyclopedia
1.1. Install MCI driver as specified above
1.2. Follow Encyclopedia's setup and install the program on your
system. When it suggest to install AVI, please refuse.
2. Video Cube
2.1. Install MCI driver as specified above
2.2. Follow Video Cube setup and install the program on your
system.
3. The Psychotron.
3.1. Install MCI driver as specified above
3.2. Follow The Psychotron setup and install the program on your
system.
4. Windows 95 installation instructions for Ring Zero Systems MCI driver.
4.1 Restart Windows in MS-DOS mode and install Ring Zero
Systems Software using INSTALL.EXE program located on installation disk.
When installation is complete restart Windows 95. At that point using
MediaPlayer you'll be able to play back MPEG files from hard disk and
CDs which are formatted as MS-DOS file system disks.
12.1 In case if you have problems with playing back Video CD
and CD-i do the following:
make sure that DOS CD-ROM driver is loaded from
CONFIG.SYS and MSCDEX.EXE from AUTOEXEC.BAT (Windows 95 may
remove it during installation)
disable Plug and Play Win95 CD-ROM driver. To do that
go to Control Panel -> System and view device list By
Connection. You need to find the CD-ROM node down some of
the branches of the device tree. When it's found get to the
next level upwards from the CD-ROM and disable corresponding
controller (it may be IDE, SCSI or CD-ROM proprietary
controller). After your restart Windows 95 that controller
will work in MS-DOS compatibility mode which would allow for
CD-ROM access at sector level and MCI driver should be able
to play CD-i and VCD.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.