**********************************************************************
* *
* Nortel BayStack 21 10/100 PCI Ethernet *
* NetWare Server Driver Installation Overview *
* *
* Copyright (C) 1999 Nortel Networks *
* All Rights Reserved. *
**********************************************************************
Contents:
A. File Description
B. Driver Installation for NetWare Server 3.1x, 4.x
C. Parameters Description for B21LAN10.LAN
A. File Description
--------------------
-------------------------------------------------------------------------------
Filename Description
-------------------------------------------------------------------------------
SERVER.TXT This file. Presents a summary of the contents for
NetWare Server driver installation.
B21LAN10.LAN Nortel's 32-Bit ODI Server driver for BayStack 21.
This driver complies with NetWare ODI Server driver
SPEC 3.31.
B21LAN10.LDI The (B21LAN10.LAN) driver installation information
file for NetWare Server 4.X, NeDOS32, Windows 3.x.
ETHERTSM.NLM NetWare Server 3.1X, 4.X LAN driver Topology
Specific Module (TSM) for Ethernet.
3.1X\NBI31X.NLM NetWare Server 3.1X Bus Interface module.
3.1X\MSM31X.NLM NetWare Server 3.1X LAN driver Media Support
Module (MSM).
4.X\MSM.NLM NetWare Server 4.X LAN driver Media Support
Module (MSM).
-------------------------------------------------------------------------------
B. Driver(Spec. 3.31) Installation for NetWare Server 3.1x, 4.x
B.1 Driver Installation for NetWare Server 3.12
1. Insert Nortel BayStack 21 10/100 PCI Ethernet Driver CD in
your PC's CD-ROM drive(i.e. E:).
2. Change to the NetWare Server directory (for example:
CD\SERVER.312)
3. Copy the following files from Driver CD to the NetWare
Server directory.
\NETWARE\SERVER\3.12\NBI31X.NLM
\NETWARE\SERVER\3.12\MSM31X.NLM
\NETWARE\SERVER\ETHERTSM.NLM
\NETWARE\SERVER\B21LAN10.LAN
4. Sample AUTOEXEC.NCF for NetWare Server 3.12
AUTOEXEC.NCF
============
LOAD C:NBI31X
LOAD C:MSM31X
LOAD C:ETHERTSM
LOAD C:B21LAN10 FRAME=ETHERNET_802.2 NAME=E_8022
LOAD C:B21LAN10 FRAME=ETHERNET_802.3 NAME=E_8023
LOAD C:B21LAN10 FRAME=ETHERNET_II NAME=E_II
LOAD C:B21LAN10 FRAME=ETHERNET_SNAP NAME=E_SNAP
BIND IPX E_8022 NET=10
BIND IPX E_8023 NET=20
BIND IPX E_II NET=30
BIND IPX E_SNAP NET=40
B.2 Driver Installation for NetWare Server 4.X
0. Copy the following files from the Driver CD to the
NetWare Server directory.
\NETWARE\SERVER\4.X\MSM.NLM
\NETWARE\SERVER\ETHERTSM.NLM
\NETWARE\SERVER\B21LAN10.LAN
1. Change to NetWare Server directory (for example:
CD\NWSERVER )
2. Load the NetWare Server System by typing SERVER, then press <Enter>.
3. When the Server prompt appears, load the NetWare Server
Installation Utility. That is,
:LOAD INSTALL
4. Select "Driver options" from the "Installtion Options" menu, then
press <Enter>.
5. Select "Configure network drivers" from the "Driver Options" menu,
then press <Enter>.
6. Select "Select a driver" from the "Additional Driver Actions" menu,
then press <Enter>.
7. Press <Ins> to install a unlisted driver, then press <F3> to
specify a different path.
8. Insert Nortel BayStack 21 10/100 PCI Ethernet Driver CD in your
PC's CD-ROM drive and specify the path A:\NETWARE\SERVER.
9. Select "Nortel BayStack 21 10/100 PCI Ethernet Driver" from the
"Select a driver to install:" menu, then press <Enter>.
10. If necessary, select "Select/Modify driver parameters and
protocols" from the "Board B21LAN10_1 (Driver B21LAN10) Actions" menu,
then press <Enter> to set up the driver parameters.
(Please refer to content D.) Otherwise, select
"Save parameters and load driver", then press <Enter>.
11. Follow instructions to complete driver installation.
12. Sample AUTOEXEC.NCF for NetWare Server 4.X
AUTOEXEC.NCF (one board)
========================
LOAD C:B21LAN10 FRAME=ETHERNET_802.2 NAME=E_8022
LOAD C:B21LAN10 FRAME=ETHERNET_802.3 NAME=E_8023
LOAD C:B21LAN10 FRAME=ETHERNET_II NAME=E_II
LOAD C:B21LAN10 FRAME=ETHERNET_SNAP NAME=E_SNAP
BIND IPX E_8022 NET=10
BIND IPX E_8023 NET=20
BIND IPX E_II NET=30
BIND IPX E_SNAP NET=40
AUTOEXEC.NCF (two boards)
=========================
LOAD C:B21LAN10 PCI_SLOT=3 FRAME=ETHERNET_802.2 NAME=E_8022_1
LOAD C:B21LAN10 PCI_SLOT=3 FRAME=ETHERNET_802.3 NAME=E_8023_1
LOAD C:B21LAN10 PCI_SLOT=3 FRAME=ETHERNET_II NAME=E_II_1
LOAD C:B21LAN10 PCI_SLOT=3 FRAME=ETHERNET_SNAP NAME=E_SNAP_1
LOAD C:B21LAN10 PCI_SLOT=4 FRAME=ETHERNET_802.2 NAME=E_8022_2
LOAD C:B21LAN10 PCI_SLOT=4 FRAME=ETHERNET_802.3 NAME=E_8023_2
LOAD C:B21LAN10 PCI_SLOT=4 FRAME=ETHERNET_II NAME=E_II_2
LOAD C:B21LAN10 PCI_SLOT=4 FRAME=ETHERNET_SNAP NAME=E_SNAP_2
BIND IPX E_8022_1 NET=10
BIND IPX E_8023_1 NET=20
BIND IPX E_II_1 NET=30
BIND IPX E_SNAP_1 NET=40
BIND IPX E_8022_2 NET=50
BIND IPX E_8023_2 NET=60
BIND IPX E_II_2 NET=70
BIND IPX E_SNAP_2 NET=80
C. Parameter Description for B21LAN10.LAN
The following parameters are used in B21LAN10.LAN.
1. SLOT : specifies which adapter is enabled when multiple BayStack 21
adapters are found in your computer. The SLOT keyword is an
index value corresponding to PCI BIOS. The mapping from SLOT
to physical PCI slot is different from one machine to
another.
Ex: LOAD B21LAN10 SLOT=3 FRAME=ETHERNET_802.2
LOAD B21LAN10 SLOT=4 FRAME=ETHERNET_II
2. FRAME : specifies which frame type is used by the driver. Accepted
values are Ethernet_802.2, Ethernet_802.3, Ethernet_II and
Ethernet_SNAP. Multiple frame types can be enabled
by loading the same driver with different FRAME types.
Ex: LOAD B21LAN10 FRAME=ETHERNET_802.2
LOAD B21LAN10 FRAME=ETHERNET_802.3
LOAD B21LAN10 FRAME=ETHERNET_II
LOAD B21LAN10 FRAME=ETHERNET_SNAP
3. NODE : Use a different address to replace the node address burned
in EEPROM.
Ex: LOAD B21LAN10 NODE=0000E8001122
4. Medium : Specifies which medium type is used by the driver.
Accepted vaules are AUTO,100FULL,100HALF,10FULL and
10HALF.
Ex: LOAD B21LAN10 SLOT=3 FRAME=ETHERNET_802.2 Medium=100FULL
---
All trademarks and brand names mentioned belong to their
respective owners.
-- End of File --
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.