README.TXT Driver File Contents (AEC3240S_Netware.zip)

        ARTOP netware IDE cache driver for ATP8400A

  ATP8400A.DSK  suport NetWare 386 v3.1x and v4.0x IDE disk module
upto 16 IDE hard disks(8.4 GB per drive).


:load ATP8400A port=1f0 irq=e mem=c8000

*I/O port :
  port=1f0 => I/O port 1f0-1f7
  port=170 => I/O port 170-177
  port=1e8 => I/O port 1e8-1ef
  port=168 => I/O port 168-16f

*IRQ :
  irq=e =>  interrupt request 14
  irq=f =>  interrupt request 15
  irq=a =>  interrupt request 10
  irq=b =>  interrupt request 11
  irq=c =>  interrupt request 12

*ROM Address:
  mem=c8000 => Rom address c8000-cbfff
  mem=cc000 => Rom address cc000-cffff
  mem=d8000 => Rom address d8000-dbfff
  mem=dc000 => Rom address dc000-dffff

Example <A>
  OS      : Netware 3.12(Diskette)
  System  : 486-66 with 8 MB memory
  Fdd     : 1.44 MB(Drive A)
  Hdd     : corner 1.2 GB IDE hard disk(Drive C)
  Lan card: WD8003 compatible Ethernet
  Install procedure
     1. Make a small DOS partiton(20 MB).
     2. Make a directory c:\server.312
     3. Copy ARTOP IDE Cache driver(ATP8400A.dsk) to directory c:\server.312 .
     4. copy lan driver WD31.lan to c:\server.312
     5. Insert Netware 3.12 Install Diskette and Run Install from Drive A:
     6. Follow Netware 3.12 procedure then into Netware Command line prompt.
     7. Load AECSCSI.DSK from Drive c:\netware.312\ATP8400A.DSK .
         :load c:\netware.312\ATP8400A <Enter>
     8. Load Lan driver WD31.lan
         :load c:\netware.312\wd31
         :bind ipx to wd31
     9. Load Install
     10.Partiton a Netware partition.
     11.Create a Netware SYS: volume  and mount SYS:.
     12.Follow Netware Installation guide
        Copy Netware System file and utility
     13.Create file Startup.ncf and autoexec.ncf
     14.Make sure load CDNASPI.DSK and CDROM.nlm in autoexec.bat
        not in startup.ncf.


Example <B>
  OS      : Netware 4.00(CDROM)
  System  : 486-66 with 16 MB memory
  Fdd     : 1.44 MB(Drive A)
  Hdd     : WD 1.0 GB IDE (Drive C)
  CDROM   : SONY CDU-521(Drive D on ARTOP SCSI-2)
  Lan card: NE2000 compatible Ethernet

     1. Make a small DOS partiton(20 MB).
     2. Make a directory c:\server.40
     3. Install CDROM drive as a MSDOS drive D:
     4. Insert Netware 4.0 CDROM diskette.
     5. Copy ARTOP IDE cache driver(ATP8400A.dsk) to directory c:\server.40
     7. load CDROM driver.
     8. Change directory to \netware.40\english then run INSTALL.BAT
     9. Give server name and IPX number then follow install guide.
     10. Select Load another(different) driver then press <Ins>,<F3>
         select directory c:\server.40
         then select ATP8400A.DSK  (I/O port 1F0h)
     12. Then continue to install.
     13. Then Select automatically to install Hdd partition.
     14. Select <F10> to save Volume.
     15. Then you need insert [LICESE] floppy diskette.
     16. Select <Alt><F10> exit to Netware command prompt.
     18. Load and mount CDROM.
     19. Load c:\netware.40\instll
     20. Select Install a new V4.0 server.
     21. Select <F3> to enter Directory CDVOL01:\netware.40\english
     22. Follow Novell install guide to continue next procedure.


Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web2, load: 1.81