Samsung PCI Network Adapter OS/2-NDIS2 Driver Installation Guide
===============================================================
This document describes how to install OS2 NDIS2 software to work with
the Samsung PCI Network adapter.
1. Install a third-party Ethernet card (for example, NE2000) with OS2
peer to peer. Make sure the system works properly.
2. Copy the driver SE100NDS.OS2 into directory IBMCOM\MACS.
3. Modify PROTOCOL.INI in IBMCOM directory using the example provided.
Following are the keywords supported in the PROTOCOL.INI.
DRIVERNAME -- Our driver name is SE100$.
RX_BUFFERS -- Number of receive buffer in 256 bytes. Valid
range from 32 to 128 with 64 (meaning 16K of
rx buffer) as the default.
LINE_SPEED -- Line speed selection. Can be either 10 or 100.
If this keyword is absent, Autonegotiation
mode is used.
TX_THRESHOLD -- Transmit threshold. Valid range from 0 to
1500 with 1500 as the default.
NODE_ADDRESS -- Node ID override. If this keyword is absent,
driver will use the one in the serial eeprom.
4. Modify CONFIG.SYS in root directory using the example provided.
In this example, OS/2 is installed as E drive and the statement
for NE2000 is replaced by the Samsung's.
rem SEC
rem SEC -- Use your NDIS driver instead of NE2000 --
rem SEC DEVICE=E:\IBMCOM\MACS\NE2000.OS2
DEVICE=E:\IBMCOM\MACS\SE100NDS.OS2
rem SEC
rem SEC -- end --
5. Restart the computer.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.