Wfw311.txt Driver File Contents (f312v130.exe)


                  NETGEAR FA312/FA311 Fast Ethernet PCI Adapter
         Driver Installation for Microsfot Windows for Workgroups 3.11

  Installation Procedure
  The following installation procedure uses the FA312 as an exmple.
  The same installation procedure can be applied to the FA311 adapter.

  1.  In Program Manager, open "Network" -> "Network Setup" -> "Drivers".

  2.  In the "Network Drivers" window, select "Add Adapter".

  3.  When installing the LAN driver, Windows for Workgroups will present a
      list of all available drivers.  But the NETGEAR FA312 driver is
      not included in the system software.  Select "Unlisted or Updated 
      Network Adapter" for 3rd party adapters not in the driver list.

  4.  Windows for Workgroups will ask for the drive/directory path con-
      taining the FA312 driver.  Provide the path to the OEMSETUP.INF file
      in the \WFW311 directory.

        eg. A:\WFW311 when installing from the provided driver disk.

      Windows for Workgroups should copy the appropriate driver to the
      Windows for Workgroups system.

  5.  Select the "NETGEAR FA312 Fast Ethernet PCI Adapter".
      At this point, the driver has been properly copied and the
      installation would proceed to the next step.  Please refer to your
      Windows for Workgroups installation guide for the correct procedures.

      After the initial installation, the FA312 drivers will be
      permanently installed into the Windows for Workgroups system.
      Subsequent accesses to the network driver list will include these
      drivers as options.

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web2, load: 0.53