(C)Copyright 2003 Marvell(R).
All rights reserved.
===========================================================================
1032odi.txt created 06-May-2003
Readme File for 1032odi.com v6.00
DOS ODI Driver
This file contains
1 Overview
2 Installation
3 Driver Parameters
4 Command line arguments
5 Sample Installation/Configuration
6 History
===========================================================================
1 Overview
===========
1032odi.com is the Ethernet Driver for the Open
Datalink Interface (ODI) by Novell.
***
2 Installation
===============
When installing the VLM package for DOS follow the steps below to
install 1032odi.com:
1. Start the Netware Client Installation.
2. Start the dialog for choosing the driver for your network adapter.
3. Select "OTHER DRIVERS".
4. Enter the path where the 1032odi.com and the
1032odi.ins file is located.
5. Select "Linksys EG1032 v2 Instant Gigabit Network Adapter".
6. In the following setup dialog select "Frame Type".
7. Select the appropriate frame type for your network.
8. After savig the setup with <F10>, the driver is installed.
9. Finish the installation of the Netware Client Installation.
***
3 Driver Parameters
====================
After the installation of the driver, there will be an entry in the
net.cfg in your nwclient installation directory that identifies your
adapter:
LINK DRIVER 1032ODI
It is followed by one or more parameters:
1) Frame type (mandatory!!)
FRAME <Frame-Type>
This parameter specifies the Ethernet frame types for your network.
Possible values are:
ETHERNET_II
ETHERNET_802.3
ETHERNET_802.2
ETHERNET_SNAP
2) Bus and device number (optional)
BUSNUM <busnum>
DEVNUM <devnum>
With these parameters the user can specify the network adapter the
driver should bind on. This is useful, when there is more than
one adapter in the system.
The bus and device number is assigned by the BIOS at boot time. When
the driver is called with the argument '-l' (see below) it shows bus
and device numbers of the adapters of this family in the system.
***
4 Command line arguments
=========================
1032odi.com can be started with the following arguments:
-l List all adapters of this family with their corresponding bus and
device number.
-u Unload the driver from memory.
***
5 Sample Installation/Configuration
====================================
Sample startnet.bat (in the nwclient installation directory):
SET NWLANGUAGE=ENGLISH
C:\NWCLIENT\LSL.COM
C:\NWCLIENT\1032odi.com
C:\NWCLIENT\IPXODI.COM
C:\NWCLIENT\VLM.EXE
Sample net.cfg (in the nwclient installation directory):
Link Driver 1032ODI
FRAME ETHERNET_802.2
BUSNUM 2
DEVNUM 1
***
6 History
==========
VERSION 6.00
Known limitations:
- None.
***End of Readme file***
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.