;*******************************************************************************
;
; PCMCIA Ethernet-Modem Adapter Setup file OEMSETUP.INF (Windows NT 4.0)
;
; Version Number: 2.12
;
; Copyright (c) 1998 - AusLinx International Pty. Ltd.
;
;*******************************************************************************
[Identification]
OptionType = NetAdapter
[PlatformsSupported]
PCMCIA
[Options]
ComNetPCMCIA
[FileConstants]
UtilityInf = "UTILITY.INF"
ParamInf = "NCPARAM.INF"
subroutineinf = "SUBROUTN.INF"
SoftwareType = "driver"
Exit_Code = 0
NetEventDLL = "%SystemRoot%\System32\netevent.dll"
IoLogMsgDLL = "%SystemRoot%\System32\IoLogMsg.dll"
Manufacturer = "EF"
ProductMajorVersion = "4"
ProductMinorVersion = "0"
ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion)
ProductSoftwareName = "COMNET"
ProductSoftwareImagePath = "\SystemRoot\System32\drivers\ComNet.sys"
NetRuleSoftwareType = "ComNetSys ndisDriver ComNetDriver"
NetRuleSoftwareUse = $(SoftwareType)
NetRuleSoftwareBindForm = """ComNetSys"" yes no container"
NetRuleSoftwareClass = {"ComNetDriver basic"}
NetRuleSoftwareBindable = {"ComNetDriver ComNetAdapter non exclusive 100"}
ProductHardwareName = "COMNET"
NetRuleHardwareType = "ComNet ComNetAdapter"
NetRuleHardwareBindForm = " yes yes container"
NetRuleHardwareClass = {"ComNetAdapter basic"}
ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
ParamKeyName = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"
CurrentControlSet = "SYSTEM\CurrentControlSet"
ServicesBaseName = $(CurrentControlSet)"\Services\Pcmcia\DataBase"
[GeneralConstants]
from = ""
to = ""
ExitCodeOk = 0
ExitCodeCancel = 1
ExitCodeFatal = 2
KeyNull = ""
MAXIMUM_ALLOWED = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct = ""
KeyParameters = ""
TRUE = 1
FALSE = 0
NoTitle = 0
ExitState = "Active"
OldVersionExisted = $(FALSE)
DriverPath = $(!STF_NTPATH)\drivers
[Source Media Descriptions]
1 = "ComNet Install Diskette" , TAGFILE = disk1
[Signature]
FileType = MICROSOFT_FILE
[GetSignature]
read-syms Signature
return $(FileType)
[ProductType]
STF_PRODUCT = Winnt
STF_PLATFORM = I386
[Files-Inf]
1, oemsetup.inf, SIZE=999, RENAME=$(!UG_Filename)
[Files-ComNetPCMCIA]
1, ComNet.SYS, SIZE=999
1, Serial.sys, SIZE=999
[LanguagesSupported]
ENG
[OptionsTextENG]
ComNetPCMCIA = "ActionTec ComNet Multifunction PCMCIA Adapter"
[DialogConstantsENG]
Help = "&Help"
Exit = "Cancel"
OK = "OK"
HelpContext = ""
Continue = "Continue"
Cancel = "Cancel"
[FileDependentDlgENG]
Combo1Label = "&IRQ Level:"
Combo2Label = "&Memory Base Address:"
Combo3Label = "I/&O Port Address:"
Combo4Label = "Modem &Port:"
DlgType = "MultiCombo"
DlgTemplate = "WD"
Caption = $(FunctionTitle)
Combo1List = ^(EFIRQ, 1)
Combo1Out = ^(EFIRQ, 2)
Combo2List = ^(EFMemBase, 1)
Combo2Out = ^(EFMemBase, 2)
Combo3List = ^(EFIoBase, 1)
Combo3Out = ^(EFIoBase, 2)
Combo4List = ^(EFCOMBase, 1)
Combo4Out = ^(EFCOMBase, 2)
ComboListItemsIn = {Combo1List, Combo2List, Combo3List, Combo4List}
ComboListItemsOut = {Combo1Out, Combo2Out, Combo3Out, Combo4Out}
EditTextIn = ""
EditTextLim = ""
NotifyFields = {NO, NO, NO}
HelpContext = $(!IDH_DB_OEMNADWD_INS)
[FileConstantsENG]
ProCaption = "Windows NT Setup"
ProCancel = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed. "+
"Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1 = "Copying:"
ProText2 = "To:"
ProductSoftwareComNetPCMCIADescription = "ActionTec ComNet Multifunction PCMCIA Card"
ProductSoftwareComNetPCMCIATitle = "ActionTec ComNet Multifunction PCMCIA Card"
ProductHardwareComNetPCMCIADescription = "ActionTec ComNet Multifunction PCMCIA Card"
ProductHardwareComNetPCMCIATitle = "ActionTec ComNet Multifunction PCMCIA Card"
FunctionTitle = $(ProductHardware$(Option)Title)" Card Setup"
ShellCodeErrorTitle = "Error: "$(FunctionTitle)
ShellCodeErrorText = "Shell Code Error."
[EFIRQ]
IRQ0 = " 5", 5
IRQ1 = " 3", 3
IRQ2 = " 4", 4
IRQ3 = " 7", 7
IRQ4 = " 9", 9
IRQ5 = "10", 10
IRQ6 = "11", 11
IRQ7 = "12", 12
IRQ8 = "14", 14
IRQ9 = "15", 15
[EFIoBase]
Base1 = "0x360", 864
Base1 = "0x100", 256
Base1 = "0x120" 288
Base1 = "0x140", 320
Base1 = "0x180", 384
Base1 = "0x1A0", 416
Base1 = "0x1C0", 448
Base1 = "0x1E0", 480
Base1 = "0x200", 512
Base1 = "0x220", 544
Base1 = "0x240", 576
Base1 = "0x260", 608
Base1 = "0x280", 640
Base1 = "0x2A0", 672
Base1 = "0x2C0", 704
Base1 = "0x2E0", 736
Base1 = "0x300", 768
Base1 = "0x320", 800
Base1 = "0x340", 832
Base1 = "0x360", 864
Base1 = "0x380", 896
[EFCOMBase]
COMBase0 = "COM1", 1016, "COM1"
COMBase1 = "COM2", 760, "COM2"
COMBase2 = "COM3", 1000, "COM3"
COMBase3 = "COM4", 744, "COM4"
[EFMemBase]
MemBase3 = "0xD4000", 868352
MemBase0 = "0xC8000", 819200
MemBase1 = "0xCC000", 835584
MemBase2 = "0xD0000", 851968
MemBase3 = "0xD4000", 868352
MemBase4 = "0xD8000", 884736
[EFDlgENG]
STF_MB_TITLE = "Modem Port Message"
DlgType = "MessageBox"
STF_MB_TEXT = $(DlgText)
STF_MB_TYPE = 2
STF_MB_ICON = 1
STF_MB_DEF = 2
[date]
Now = {} ? $(!LIBHANDLE) GetSystemDate
[Identify]
read-syms Identification
set Status = STATUS_SUCCESSFUL
set Identifier = $(OptionType)
set Media = #("Source Media Descriptions", 1, 1)
Return $(Status) $(Identifier) $(Media)
[ReturnOptions]
set Status = STATUS_FAILED
set OptionList = {}
set OptionTextList = {}
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) in $(LanguageList)
ifstr(i) $($1) == ""
goto returnoptions
endif
set PlatformList = ^(PlatformsSupported, 1)
Ifcontains(i) $($1) in $(PlatformList)
goto returnoptions
else
set Status = STATUS_NOTSUPPORTED
goto finish_ReturnOptions
endif
else
set Status = STATUS_NOLANGUAGE
goto finish_ReturnOptions
endif
returnoptions = +
set OptionList = ^(Options, 1)
set OptionTextList = ^(OptionsText$($0), 1)
set Status = STATUS_SUCCESSFUL
finish_ReturnOptions = +
Return $(Status) $(OptionList) $(OptionTextList)
[InstallOption]
set Option = $($1)
set SrcDir = $($2)
set AddCopy = $($3)
set DoCopy = $($4)
set DoConfig = $($5)
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) NOT-IN $(LanguageList)
Return STATUS_NOLANGUAGE
endif
set-subst LF = "\n"
read-syms GeneralConstants
read-syms FileConstants
read-syms DialogConstants$(!STF_LANGUAGE)
ifstr(i) $(!NTN_Origination) == "NCPA"
set Continue = $(OK)
endif
read-syms FileConstants$(!STF_LANGUAGE)
detect date
set-title $(FunctionTitle)
set to = Begin
set from = Begin
set CommonStatus = STATUS_SUCCESSFUL
EndWait
Begin = +
set ActivateDetection = FALSE
Ifstr(i) $(!NTN_InstallMode) == deinstall
set StartLabel = removeadapter
else-Ifstr(i) $(!NTN_InstallMode) == Update
set StartLabel = UpgradeSoftware
else-Ifstr(i) $(!NTN_InstallMode) == bind
set StartLabel = bindingadapter
else-Ifstr(i) $(!NTN_InstallMode) == configure
set CommonStatus = STATUS_REBOOT
set ActivateDetection = TRUE
set StartLabel = configureadapter
Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
set from = end
set to = end
goto nonfatalinfo
endif
else
set StartLabel = installadapter
set OEM_ABANDON_OPTIONS = {}
set OEM_ABANDON_SOFTWARE = FALSE
set OEM_ABANDON_ON = TRUE
set ActivateDetection = TRUE
endif
Set DetectedCard = FALSE
set PCMCIA = 1
set CardType = 1
Ifstr(i) $(ActivateDetection) != TRUE
Goto skipdetection
Endif
Set TypeList = {{IRQ,IRQList,IRQValue},+
{PCMCIA, PCMCIAList, PCMCIA},+
{CARDTYPE, CardTypeList, CardType},+
{PCCARDATTRIBUTEMEM, PcCardAddressDecList, PcCardBaseValue},+
{IOADDR, IOBaseAddrDecList, IOBaseAddrValue}}
Shell $(ParamInf) Param_BuildTypeLists NE2000IBMCOMPAT $(TypeList)
Set Status = $($R0)
ifstr(i) $(Status) != STATUS_SUCCESSFUL
Goto fataldetect
Endif
Shell $(ParamInf) Param_SetDefaults {}
Shell $(ParamInf) HexListFromDecList $(IOBaseAddrDecList)
Set IOBaseAddrHexList = $($R0)
Shell $(ParamInf) HexListFromDecList $(PcCardAddressDecList)
Set PcCardAddressHexList = $($R0)
Shell $(UtilityInf) SortList $(IRQList) TRUE FALSE
Set IRQList = $($R0)
Ifstr(i) $(!STF_NCDETECT) == YES
Ifstr(i) $(!STF_NCOPTION) == "ComNetPCMCIA"
Set DetectedCard = TRUE
Endif
Endif
skipdetection =+
set from = $(fatal)
set to = $(fatal)
goto $(StartLabel)
installadapter = +
OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) != $(KeyNull)
CloseRegKey $(KeyProduct)
ifstr(i) !(NTN_RegBase) == $(ProductKeyName)
Shell $(UtilityInf), VerExistedDlg, $(ProductSoftware$(Option)Title),+
$(ProductVersion)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
goto end
else
Shell $(UtilityInf), CardExistedDlg
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) != "OK"
set CommonStatus = STATUS_USERCANCEL
goto end
endif
set OldVersionExisted = $(TRUE)
endif
endif
Ifstr(i) $(DetectedCard) != TRUE
Goto adaptersetup
Endif
StartWait
Shell $(ParamInf) Param_QueryCard $(!STF_NCDETCARD)
EndWait
Ifstr(i) $($R0) != STATUS_SUCCESSFUL
Goto adaptersetup
Endif
Set DetectedParams = $($R1)
Shell $(ParamInf) Param_SetDefaults $(DetectedParams)
goto adapteroptions
configureadapter = +
Ifstr $(KeyProduct) == $(KeyNull)
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
goto fatalregistry
Endif
Endif
Shell $(UtilityInf) FindService, $(KeyProduct)
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Goto ShellCodeError
Endif
Ifstr(i) $($R0) != NO_ERROR
Goto fatalregistry
endif
set KeyParameters = $($R2)
CloseRegKey $($R1)
Ifstr $(KeyParameters) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
goto fatalregistry
endif
set OldVersionExisted = $(TRUE)
set ValueName = ""
set ValueData = ""
set ValueStr = ""
set ValueList = {}
EnumRegValue $(KeyParameters) ValueList
ForListDo $(ValueList)
set ValueItem = $($)
set ValueName = *($(ValueItem),1)
set ValueData = *($(ValueItem),4)
Ifstr(i) $(ValueName) == "InterruptNumber"
set IRQValue = $(ValueData)
else-Ifstr(i) $(ValueName) == "MemoryMappedBaseAddress"
set PcCardBaseValue = $(ValueData)
else-ifstr(i) $(ValueName) == "IoBaseAddress"
set IOBaseAddrValue = $(ValueData)
else-ifstr(i) $(ValueName) == "BusType"
set BusInterfaceType = $(ValueData)
else-ifstr(i) $(ValueName) == "PCMCIA"
set PCMCIA = $(ValueData)
else-ifstr(i) $(ValueName) == "BusNumber"
set BusNumber = $(ValueData)
endif
EndForListDo
ifstr(i) $(IRQValue) == ""
set IRQValue = *($(IRQList), 10)
endif
ifstr(i) $(IOBaseAddrValue) == ""
set IOBaseAddrValue = *($(IOBaseAddrDecList), 1)
endif
adaptersetup =+
Shell $(ParamInf) Param_ParameterConfidence
Ifstr(i) $($R0) != STATUS_SUCCESSFUL
Goto adapteroptions
Endif
Ifstr(i) $(DetectedCard) == TRUE
Ifstr(i) $(!STF_INSTALL_MODE) != CUSTOM
Goto adapterverify
Endif
Endif
goto adapteroptions
adapteroptions = +
set from = adapteroptions
ifstr(i) $(!STF_GUI_UNATTENDED) == "YES"
ifstr(i) $(!AutoNetInterfaceType) != ""
set BusInterfaceType = $(!AutoNetInterfaceType)
else
set BusInterfaceType = 1
endif
ifstr(i) $(!AutoNetBusNumber) != ""
set BusNumber = $(!AutoNetBusNumber)
else
set BusNumber = 0
endif
goto adapterverify
endif
set IOBaseAddress = *($(IOBaseAddrHexList), ~($(IOBaseAddrDecList),+
$(IOBaseAddrValue)))
set PcCardAddress = *($(PcCardAddressHexList), ~($(PcCardAddressDecList),+
$(PcCardBaseValue)))
read-syms FileDependentDlg$(!STF_LANGUAGE)
ui start "InputDlg"
ifstr(i) $(DLGEVENT) == "CONTINUE"
set IRQValue = $(Combo1Out)
set PcCardAddress = $(Combo2Out)
set IOBaseAddress = $(Combo3Out)
ui pop 1
else-ifstr(i) $(DLGEVENT) == "BACK"
set CommonStatus = STATUS_USERCANCEL
ui pop 1
goto end
else
ui pop 1
goto end
endif
set PcCardBaseValue = *($(PcCardAddressDecList), ~($(PcCardAddressHexList),+
$(PcCardAddress)))
set IOBaseAddrValue = *($(IOBaseAddrDecList), ~($(IOBaseAddrHexList),+
$(IOBaseAddress)))
ifstr(i) $(!STF_NCDETINFO) == {}
ifint $(PCMCIA) != 1
Shell $(UtilityInf),GetBusTypeDialog,$(ProductHardware$(Option)Description) $(BusInterfaceType) $(BusNumber)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set BusInterfaceType = $($R1)
set BusNumber = $($R2)
else
set BusInterfaceType = 1
set BusNumber = 0
endif
else
set BusInterfaceType = *($(!STF_NCDETINFO),5)
set BusNumber = *($(!STF_NCDETINFO),6)
endif
adapterverify =+
Ifstr(i) $(DetectedCard) != TRUE
Goto skipoptions
Endif
Shell $(ParamInf) Param_VerifyCard $(!STF_NCDETCARD)
Ifstr(i) $($R0) == STATUS_SUCCESSFUL
Goto skipoptions
Endif
Set from = adapteroptions
Set to = skipoptions
Shell $(UtilityInf),RegistryErrorString,VERIFY_WARNING
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
Goto Warning
skipoptions =+
ifint $(OldVersionExisted) == $(TRUE)
ifstr(i) $(!NTN_InstallMode) == configure
goto writeparameters
endif
endif
StartWait
ifint $(OldVersionExisted) == $(FALSE)
ifstr(i) $(!NTN_InstallMode) == "install"
Ifstr(i) $(DoCopy) == "YES"
Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Goto ShellCodeError
Else-Ifstr(i) $($R0) == STATUS_FAILED
Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
Goto successful
Endif
Set SrcDir = $($R1)
Endif
install "Install-Option"
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
endif
endif
Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName), +
$(ProductSoftwareName), +
$(ProductSoftware$(Option)Title), $(STF_CONTEXTINFNAME), +
$(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+
$(NetEventDLL)
Set OEM_ABANDON_SOFTWARE = TRUE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
set KeyProduct = $($R1)
Set SoftNetRulesKey = $($R2)
CloseRegKey $($R3)
CloseRegKey $($R4)
CloseRegKey $($R5)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
goto fatalregistry
endif
set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
{MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
{MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
{Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftware$(Option)Title)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftware$(Option)Description)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
Shell $(UtilityInf), AddValueList, $(KeyProduct), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
goto fatalregistry
endif
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
{use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
{bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
{bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Shell $(UtilityInf), AddValueList, $(SoftNetRulesKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
goto fatalregistry
endif
endif
Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)
ifint $($R4) != -1
Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
endif
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
CloseRegKey $($R1)
CloseRegKey $($R2)
CloseRegKey $($R3)
goto fatalregistry
endif
set KeyParameters = $($R3)
set KeyAdapterRules = $($R2)
set AdapterNumber = $($R4)
set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
{Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)Title)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+
{ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
Shell $(UtilityInf), AddValueList, $($R1), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $($R1)
set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+
{bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Shell $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
CloseRegKey $(KeyParameters)
CloseRegKey $(KeyAdapterRules)
goto fatalregistry
endif
CloseRegKey $(KeyAdapterRules)
goto writeparameters
writeparameters = +
ifint $(BusInterfaceType) == 8
set PCMCIA = 1
set BusInterfaceType = 1
endif
DoModemPortAgain = +
set DlgText = "Setting COM 3 (0x3E8) as Modem Port ?"
read-syms EFDlgENG
ui start "EFSetupMessage"
ifstr(i) $(DLGEVENT) == "OK"
set Status = STATUS_SUCCESSFUL
set EFComPort = "COM3"
set EFCOMIoPort = 1000
else-ifstr(i) $(DLGEVENT) == "CANCEL"
set DlgText = "Setting COM 4 (0x2E8) as Modem Port ?"
read-syms EFDlgENG
ui start "EFSetupMessage"
ifstr(i) $(DLGEVENT) == "OK"
set Status = STATUS_SUCCESSFUL
set EFComPort = "COM4"
set EFCOMIoPort = 744
else-ifstr(i) $(DLGEVENT) == "CANCEL"
set DlgText = "Setting COM 2 (0x2F8) as Modem Port ?"
read-syms EFDlgENG
ui start "EFSetupMessage"
ifstr(i) $(DLGEVENT) == "OK"
set Status = STATUS_SUCCESSFUL
set EFComPort = "COM2"
set EFCOMIoPort = 760
else-ifstr(i) $(DLGEVENT) == "CANCEL"
set DlgText = "Setting COM 1 (0x3F8) as Modem Port ?"
read-syms EFDlgENG
ui start "EFSetupMessage"
ifstr(i) $(DLGEVENT) == "OK"
set Status = STATUS_SUCCESSFUL
set EFComPort = "COM1"
set EFCOMIoPort = 1016
else-ifstr(i) $(DLGEVENT) == "CANCEL"
set DlgText = "Continue Setting Modem Port ?"
read-syms EFDlgENG
ui start "EFSetupMessage"
ifstr(i) $(DLGEVENT) == "OK"
set Status = STATUS_SUCCESSFUL
goto DoModemPortAgain
else
set Status = STATUS_SUCCESSFUL
endif
endif
endif
endif
endif
OpenRegKey $(!REG_H_LOCAL) "" $(ServicesBaseName)"\Multifunction Card" $(MAXIMUM_ALLOWED) ComNetKey
Ifstr(i) $(ComNetKey) == $(KeyNull)
CreateRegKey $(!REG_H_LOCAL) {$(ServicesBaseName)"\Multifunction Card",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" ComNetKey
CloseRegKey $(ComNetKey)
endif
OpenRegKey $(!REG_H_LOCAL) "" $(ServicesBaseName)"\Multifunction Card\LAN and Modem 336" $(MAXIMUM_ALLOWED) ComNetKey
Ifstr(i) $(ComNetKey) == $(KeyNull)
CreateRegKey $(!REG_H_LOCAL) {$(ServicesBaseName)"\Multifunction Card\LAN and Modem 336",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" ComNetKey
set NewValueList = {{AttributeMemorySize, $(NoTitle), $(!REG_VT_DWORD), 4096},+
{CardMemorySize, $(NoTitle), $(!REG_VT_DWORD), 0},+
{Driver, $(NoTitle), $(!REG_VT_SZ), $(ProductSoftwareName)}}
Shell $(UtilityInf), AddValueList, $(ComNetKey), $(NewValueList)
CloseRegKey $(ComNetKey)
endif
set-add AttributeMemPtr = $(PcCardBaseValue), 16384
set NewValueList = {{InterruptNumber,$(NoTitle),$(!REG_VT_DWORD),$(IRQValue)},+
{BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusInterfaceType)},+
{BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNumber)},+
{MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
{CardType,$(NoTitle),$(!REG_VT_DWORD),1},+
{MemoryMappedBaseAddress,$(NoTitle),$(!REG_VT_DWORD),$(PcCardBaseValue)},+
{MemoryMappedSize,$(NoTitle),$(!REG_VT_DWORD),16384},+
{PCCARDMemoryWindowOffset,$(NoTitle),$(!REG_VT_DWORD),16384},+
{PCCARDAttributeMemoryAddress,$(NoTitle),$(!REG_VT_DWORD),$(AttributeMemPtr)},+
{PCCARDAttributeMemoryOffset,$(NoTitle),$(!REG_VT_DWORD),0},+
{PCCARDAttributeMemorySize,$(NoTitle),$(!REG_VT_DWORD),8192},+
{IoBaseAddress,$(NoTitle),$(!REG_VT_DWORD),$(IOBaseAddrValue)},+
{IoLength,$(NoTitle),$(!REG_VT_DWORD),31},+
{IoBaseAddress_1,$(NoTitle),$(!REG_VT_DWORD),$(EFCOMIoPort)},+
{IoLength_1,$(NoTitle),$(!REG_VT_DWORD),7}}
Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
ifint $(PCMCIA) == 1
set NewValueList = {{Pcmcia,$(NoTitle),$(!REG_VT_DWORD),1}}
Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
else
DeleteRegValue $(KeyParameters) "Pcmcia"
endif
ifstr(i) $(!STF_GUI_UNATTENDED) == "YES"
Shell $(UtilityInf),AddDefaultNetCardParameters,$(KeyParameters)
endif
CloseRegKey $(KeyParameters)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
Ifstr(i) $(EFComPort) != "None"
OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Serial\Parameters\EFSerial" $(MAXIMUM_ALLOWED) EFSerialHandle
Ifstr $(EFSerialHandle) == $(KeyNull)
OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Serial\Parameters" $(MAXIMUM_ALLOWED) EFSerialKey
CreateRegKey $(EFSerialKey) {"EFSerial",0,GenericClass} "" $(MAXIMUM_ALLOWED) "" EFSerialHandle
CloseRegKey $(EFSerialKey)
Endif
Set NewValueList = {{DosDevices, $(NoTitle),$(!REG_VT_SZ), $(EFComPort)},+
{ForceFifoEnable, $(NoTitle),$(!REG_VT_DWORD), 1},+
{Interrupt, $(NoTitle),$(!REG_VT_DWORD), $(IRQValue)},+
{PortAddress, $(NoTitle),$(!REG_VT_DWORD), $(EFCOMIoPort)}}
Shell $(UtilityInf), AddValueList, $(EFSerialHandle), $(NewValueList)
CloseRegKey $(EFSerialHandle)
OpenRegKey $(!REG_H_LOCAL) "" "HARDWARE\DEVICEMAP\SERIALCOMM" $(MAXIMUM_ALLOWED) EFSerialHandle
Ifstr $(EFSerialHandle) == $(KeyNull)
OpenRegKey $(!REG_H_LOCAL) "" "HARDWARE\DEVICEMAP" $(MAXIMUM_ALLOWED) EFSerialKey
CreateRegKey $(EFSerialKey) {"SERIALCOMM",0,GenericClass} "" $(MAXIMUM_ALLOWED) "" EFSerialHandle
CloseRegKey $(EFSerialKey)
Endif
SetRegValue $(EFSerialHandle) {"EFSerial",$(NoTitle),$(!REG_VT_SZ),$(EFComPort)}
CloseRegKey $(EFSerialHandle)
OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows NT\CurrentVersion\Ports" $(MAXIMUM_ALLOWED) EFSerialHandle
Ifstr $(EFSerialHandle) == $(KeyNull)
OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows NT\CurrentVersion" $(MAXIMUM_ALLOWED) EFSerialKey
CreateRegKey $(EFSerialKey) {"Ports",0,GenericClass} "" $(MAXIMUM_ALLOWED) "" EFSerialHandle
CloseRegKey $(EFSerialKey)
Endif
SetRegValue $(EFSerialHandle) {$(EFComPort)":",$(NoTitle),$(!REG_VT_SZ),"9600,n,8,1"}
CloseRegKey $(EFSerialHandle)
Else
; Remove Serial port.
OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Serial\Parameters" $(MAXIMUM_ALLOWED) EFSerialHandle
DeleteRegTree $(EFSerialHandle) "EFSerial"
CloseRegKey $(EFSerialHandle)
OpenRegKey $(!REG_H_LOCAL) "" "HARDWARE\DEVICEMAP\SERIALCOMM" $(MAXIMUM_ALLOWED) EFSerialHandle
DeleteRegValue $(EFSerialHandle) "EFSerial"
CloseRegKey $(EFSerialHandle)
Endif
EndWait
goto successful
bindingadapter =+
set Error = "Binding: Sorry, not yet implemented."
goto fatal
removeadapter = +
Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
else
Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
$(ProductSoftwareName), $(!NTN_RegBase)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Serial\Parameters" $(MAXIMUM_ALLOWED) EFSerialHandle
DeleteRegTree $(EFSerialHandle) "EFSerial"
CloseRegKey $(EFSerialHandle)
OpenRegKey $(!REG_H_LOCAL) "" "HARDWARE\DEVICEMAP\SERIALCOMM" $(MAXIMUM_ALLOWED) EFSerialHandle
DeleteRegValue $(EFSerialHandle) "EFSerial"
CloseRegKey $(EFSerialHandle)
set DataBaseKeyName = $(!NTN_ServiceBase)"\Pcmcia\DataBase"
OpenRegKey $(!REG_H_LOCAL) "" $(DataBaseKeyName) $(MAXIMUM_ALLOWED) DataBaseKey
Ifstr $(DataBaseKey) == $(NULL)
Debug-Output "INF: Pcmcia\DataBase not present"
else
OpenRegKey $(!REG_H_LOCAL) "" $(DataBaseKeyName)"\Multifunction Card" $(MAXIMUM_ALLOWED) EFKey
Ifstr $(EFKey) != $(NULL)
CloseRegKey $(EFKey)
DeleteRegTree $(DataBaseKey) "Multifunction Card"
endif
endif
goto end
UpgradeSoftware = +
OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) != $(KeyNull)
install "Install-Update"
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
goto fatal
endif
SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}
CloseRegKey $(KeyProduct)
else
goto fatalregistry
endif
goto end
successful = +
goto end
abandon = +
ForListDo $(OEM_ABANDON_OPTIONS)
Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
$(ProductSoftwareName), $($)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
EndForListDo
Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName), FALSE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
endif
goto end
warning = +
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) == "OK"
goto $(to)
else-ifstr(i) $($R1) == "CANCEL"
goto $(from)
else
goto "end"
endif
nonfatalinfo = +
Set CommonStatus = STATUS_USERCANCEL
Set Severity = STATUS
goto nonfatalmsg
nonfatal = +
Set Severity = NONFATAL
goto nonfatalmsg
nonfatalmsg = +
ifstr(i) $(Error) == ""
Set Severity = NONFATAL
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
endif
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) == "OK"
goto $(from)
else
goto "end"
endif
fatalregistry = +
Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
fataldetect = +
Shell $(UtilityInf),RegistryErrorString,CANNOT_DETECT
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
fatal = +
ifstr(i) $(Error) == ""
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
endif
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
goto setfailed
ShellCodeError = +
set DlgType = "MessageBox"
set STF_MB_TITLE = $(ShellCodeErrorTitle)
set STF_MB_TEXT = $(ShellCodeErrorText)
set STF_MB_TYPE = 1
set STF_MB_ICON = 3
set STF_MB_DEF = 1
ui start "Error Message"
goto setfailed
setfailed = +
set CommonStatus = STATUS_FAILED
ifstr(i) $(OEM_ABANDON_ON) == TRUE
set OEM_ABANDON_ON = FALSE
goto abandon
endif
goto end
end = +
goto term
term = +
Return $(CommonStatus)
[Install-Option]
set STF_VITAL = ""
ifstr(i) $(AddCopy) == "YES"
AddSectionFilesToCopyList Files-ComNetPCMCIA $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
endif
ifstr(i) $(DoCopy) == "YES"
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
endif
ifstr(i) $(DoConfig) == "YES"
endif
Exit
[Install-Update]
set STF_VITAL = ""
set STF_OVERWRITE = "VERIFYSOURCEOLDER"
AddSectionFilesToCopyList Files-ComNetPCMCIA $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
exit
[EFSetupMessage]
set Status = STATUS_FAILED
set UserAction = "CANCEL"
set LanguageList = ^(LanguageID, 1)
Ifcontains(i) $($0) in $(LanguageList)
goto displaymessage
else
set Status = STATUS_NOLANGUAGE
goto finish_SetupMessage
endif
displaymessage = +
read-syms EFDlgENG
ui start "EFSetupMessage"
ifstr(i) $(DLGEVENT) == "OK"
set Status = STATUS_SUCCESSFUL
set UserAction = $(DLGEVENT)
else-ifstr(i) $(DLGEVENT) == "CANCEL"
set Status = STATUS_SUCCESSFUL
set UserAction = $(DLGEVENT)
else
endif
finish_SetupMessage = +
Return $(Status) $(UserAction)
end
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.